## The default timezone of the server.
## @toml2docs:none-default
default_timezone = "UTC"

## The default column prefix for auto-created time index and value columns.
## @toml2docs:none-default
default_column_prefix = "greptime"

## Maximum total memory for all concurrent write request bodies and messages (HTTP, gRPC, Flight).
## Set to 0 to disable the limit. Default: "0" (unlimited)
## @toml2docs:none-default
#+ max_in_flight_write_bytes = "1GB"

## Policy when write bytes quota is exhausted.
## Options: "wait" (default, 10s timeout), "wait(<duration>)" (e.g., "wait(30s)"), "fail"
## @toml2docs:none-default
#+ write_bytes_exhausted_policy = "wait"

## The runtime options.
#+ [runtime]
## The number of threads to execute the runtime for global read operations.
#+ global_rt_size = 8
## The number of threads to execute the runtime for global write operations.
#+ compact_rt_size = 4

## The heartbeat options.
[heartbeat]
## Interval for sending heartbeat messages to the metasrv.
interval = "18s"

## Interval for retrying to send heartbeat messages to the metasrv.
retry_interval = "3s"

## The HTTP server options.
[http]
## The address to bind the HTTP server.
addr = "127.0.0.1:4000"
## HTTP request timeout. Set to 0 to disable timeout.
timeout = "0s"
## HTTP request body limit.
## The following units are supported: `B`, `KB`, `KiB`, `MB`, `MiB`, `GB`, `GiB`, `TB`, `TiB`, `PB`, `PiB`.
## Set to 0 to disable limit.
body_limit = "64MB"
## HTTP CORS support, it's turned on by default
## This allows browser to access http APIs without CORS restrictions
enable_cors = true
## Customize allowed origins for HTTP CORS.
## @toml2docs:none-default
cors_allowed_origins = ["https://example.com"]
## Whether to enable validation for Prometheus remote write requests.
## Available options:
## - strict: deny invalid UTF-8 strings (default).
## - lossy: allow invalid UTF-8 strings, replace invalid characters with REPLACEMENT_CHARACTER(U+FFFD).
## - unchecked: do not valid strings.
prom_validation_mode = "strict"

## The gRPC server options.
[grpc]
## The address to bind the gRPC server.
bind_addr = "127.0.0.1:4001"
## The address advertised to the metasrv, and used for connections from outside the host.
## If left empty or unset, the server will automatically use the IP address of the first network interface
## on the host, with the same port number as the one specified in `grpc.bind_addr`.
server_addr = "127.0.0.1:4001"
## The number of server worker threads.
runtime_size = 8
## Compression mode for frontend side Arrow IPC service. Available options:
## - `none`: disable all compression
## - `transport`: only enable gRPC transport compression (zstd)
## - `arrow_ipc`: only enable Arrow IPC compression (lz4)
## - `all`: enable all compression.
## Default to `none`
flight_compression = "arrow_ipc"
## The maximum connection age for gRPC connection.
## The value can be a human-readable time string. For example: `10m` for ten minutes or `1h` for one hour.
## Refer to https://grpc.io/docs/guides/keepalive/ for more details.
## @toml2docs:none-default
#+ max_connection_age = "10m"

## gRPC server TLS options, see `mysql.tls` section.
[grpc.tls]
## TLS mode.
mode = "disable"

## Certificate file path.
## @toml2docs:none-default
cert_path = ""

## Private key file path.
## @toml2docs:none-default
key_path = ""

## Watch for Certificate and key file change and auto reload.
## For now, gRPC tls config does not support auto reload.
watch = false

## The internal gRPC server options. Internal gRPC port for nodes inside cluster to access frontend.
[internal_grpc]
## The address to bind the gRPC server.
bind_addr = "127.0.0.1:4010"
## The address advertised to the metasrv, and used for connections from outside the host.
## If left empty or unset, the server will automatically use the IP address of the first network interface
## on the host, with the same port number as the one specified in `grpc.bind_addr`.
server_addr = "127.0.0.1:4010"
## The number of server worker threads.
runtime_size = 8
## Compression mode for frontend side Arrow IPC service. Available options:
## - `none`: disable all compression
## - `transport`: only enable gRPC transport compression (zstd)
## - `arrow_ipc`: only enable Arrow IPC compression (lz4)
## - `all`: enable all compression.
## Default to `none`
flight_compression = "arrow_ipc"

## internal gRPC server TLS options, see `mysql.tls` section.
[internal_grpc.tls]
## TLS mode.
mode = "disable"

## Certificate file path.
## @toml2docs:none-default
cert_path = ""

## Private key file path.
## @toml2docs:none-default
key_path = ""

## Watch for Certificate and key file change and auto reload.
## For now, gRPC tls config does not support auto reload.
watch = false

## MySQL server options.
[mysql]
## Whether to enable.
enable = true
## The addr to bind the MySQL server.
addr = "127.0.0.1:4002"
## The number of server worker threads.
runtime_size = 2
## Server-side keep-alive time.
## Set to 0 (default) to disable.
keep_alive = "0s"
## Maximum entries in the MySQL prepared statement cache; default is 10,000.
prepared_stmt_cache_size = 10000

# MySQL server TLS options.
[mysql.tls]

## TLS mode, refer to https://www.postgresql.org/docs/current/libpq-ssl.html
## - `disable` (default value)
## - `prefer`
## - `require`
## - `verify-ca`
## - `verify-full`
mode = "disable"

## Certificate file path.
## @toml2docs:none-default
cert_path = ""

## Private key file path.
## @toml2docs:none-default
key_path = ""

## Watch for Certificate and key file change and auto reload
watch = false

## PostgresSQL server options.
[postgres]
## Whether to enable
enable = true
## The addr to bind the PostgresSQL server.
addr = "127.0.0.1:4003"
## The number of server worker threads.
runtime_size = 2
## Server-side keep-alive time.
## Set to 0 (default) to disable.
keep_alive = "0s"

## PostgresSQL server TLS options, see `mysql.tls` section.
[postgres.tls]
## TLS mode.
mode = "disable"

## Certificate file path.
## @toml2docs:none-default
cert_path = ""

## Private key file path.
## @toml2docs:none-default
key_path = ""

## Watch for Certificate and key file change and auto reload
watch = false

## OpenTSDB protocol options.
[opentsdb]
## Whether to enable OpenTSDB put in HTTP API.
enable = true

## InfluxDB protocol options.
[influxdb]
## Whether to enable InfluxDB protocol in HTTP API.
enable = true

## Jaeger protocol options.
[jaeger]
## Whether to enable Jaeger protocol in HTTP API.
enable = true

## Prometheus remote storage options
[prom_store]
## Whether to enable Prometheus remote write and read in HTTP API.
enable = true
## Whether to store the data from Prometheus remote write in metric engine.
with_metric_engine = true

## The metasrv client options.
[meta_client]
## The addresses of the metasrv.
metasrv_addrs = ["127.0.0.1:3002"]

## Operation timeout.
timeout = "3s"

## DDL timeout.
ddl_timeout = "10s"

## Connect server timeout.
connect_timeout = "1s"

## `TCP_NODELAY` option for accepted connections.
tcp_nodelay = true

## The configuration about the cache of the metadata.
metadata_cache_max_capacity = 100000

## TTL of the metadata cache.
metadata_cache_ttl = "10m"

# TTI of the metadata cache.
metadata_cache_tti = "5m"

## The query engine options.
[query]
## Parallelism of the query engine.
## Default to 0, which means the number of CPU cores.
parallelism = 0
## Whether to allow query fallback when push down optimize fails.
## Default to false, meaning when push down optimize failed, return error msg
allow_query_fallback = false

## Memory pool size for query execution operators (aggregation, sorting, join).
## Supports absolute size (e.g., "4GB", "8GB") or percentage of system memory (e.g., "30%").
## Setting it to 0 disables the limit (unbounded, default behavior).
## When this limit is reached, queries will fail with ResourceExhausted error.
## NOTE: This does NOT limit memory used by table scans (only applies to datanodes).
memory_pool_size = "50%"

## Datanode options.
[datanode]
## Datanode client options.
[datanode.client]
connect_timeout = "10s"
tcp_nodelay = true

## The logging options.
[logging]
## The directory to store the log files. If set to empty, logs will not be written to files.
dir = "./greptimedb_data/logs"

## The log level. Can be `info`/`debug`/`warn`/`error`.
## @toml2docs:none-default
level = "info"

## Enable OTLP tracing.
enable_otlp_tracing = false

## The OTLP tracing endpoint.
otlp_endpoint = "http://localhost:4318/v1/traces"

## Whether to append logs to stdout.
append_stdout = true

## The log format. Can be `text`/`json`.
log_format = "text"

## The maximum amount of log files.
max_log_files = 720

## The OTLP tracing export protocol. Can be `grpc`/`http`.
otlp_export_protocol = "http"

## Additional OTLP headers, only valid when using OTLP http
[logging.otlp_headers]
## @toml2docs:none-default
#Authorization = "Bearer my-token"
## @toml2docs:none-default
#Database = "My database"

## The percentage of tracing will be sampled and exported.
## Valid range `[0, 1]`, 1 means all traces are sampled, 0 means all traces are not sampled, the default value is 1.
## ratio > 1 are treated as 1. Fractions < 0 are treated as 0
[logging.tracing_sample_ratio]
default_ratio = 1.0

## The slow query log options.
[slow_query]
## Whether to enable slow query log.
enable = true

## The record type of slow queries. It can be `system_table` or `log`.
## If `system_table` is selected, the slow queries will be recorded in a system table `greptime_private.slow_queries`.
## If `log` is selected, the slow queries will be logged in a log file `greptimedb-slow-queries.*`.
record_type = "system_table"

## The threshold of slow query. It can be human readable time string, for example: `10s`, `100ms`, `1s`.
threshold = "30s"

## The sampling ratio of slow query log. The value should be in the range of (0, 1]. For example, `0.1` means 10% of the slow queries will be logged and `1.0` means all slow queries will be logged.
sample_ratio = 1.0

## The TTL of the `slow_queries` system table. Default is `90d` when `record_type` is `system_table`.
ttl = "90d"

## The tracing options. Only effect when compiled with `tokio-console` feature.
#+ [tracing]
## The tokio console address.
## @toml2docs:none-default
#+ tokio_console_addr = "127.0.0.1"

## The memory options.
[memory]
## Whether to enable heap profiling activation during startup.
## When enabled, heap profiling will be activated if the `MALLOC_CONF` environment variable
## is set to "prof:true,prof_active:false". The official image adds this env variable.
## Default is true.
enable_heap_profiling = true

## Configuration options for the event recorder.
[event_recorder]
## TTL for the events table that will be used to store the events. Default is `90d`.
ttl = "90d"