## Problem
The `Deleter` currently doesn't use a backoff::retry because it doesn't
need to: it is already inside a loop when doing the deletion, so can
just let the loop go around.
However, this is a problem for logging, because we log on errors, which
includes things like 503/429 cases that would usually be swallowed by a
backoff::retry in most places we use the RemoteStorage interface.
The underlying problem is that RemoteStorage doesn't have a proper error
type, and an anyhow::Error can't easily be interrogated for its original
S3 SdkError because downcast_ref requires a concrete type, but SdkError
is parametrized on response type.
## Summary of changes
Wrap remote deletions in Deleter in a backoff::retry to avoid logging
warnings on transient 429/503 conditions, and for symmetry with how
RemoteStorage is used in other places.
## Problem
These types/functions are public and it prevents clippy from catching
unused things.
## Summary of changes
Move to `pub(crate)` and remove the error enum that becomes clearly
unused as a result.
## Problem
If a caller detaches a tenant and then attaches it again, pending
deletions from the old attachment might not have happened yet. This is
not a correctness problem, but it causes:
- Risk of leaking some objects in S3
- Some warnings from the deletion queue when pending LSN updates and
pending deletions don't pass validation.
## Summary of changes
- Deletion queue now uses UnboundedChannel so that the push interfaces
don't have to be async.
- This was pulled out of https://github.com/neondatabase/neon/pull/5397,
where it is also useful to be able to drive the queue from non-async
contexts.
- Why is it okay for this to be unbounded? The only way the
unbounded-ness of the channel can become a problem is if writing out
deletion lists can't keep up, but if the system were that overloaded
then the code generating deletions (GC, compaction) would also be
impacted.
- DeletionQueueClient gets a new `flush_advisory` function, which is
like flush_execute, but doesn't wait for completion: this is appropriate
for use in contexts where we would like to encourage the deletion queue
to flush, but don't need to block on it.
- This function is also expected to be useful in next steps for seamless
migration, where the option to flush to S3 while transitioning into
AttachedStale will also include flushing deletion queue, but we wouldn't
want to block on that flush.
- The tenant_detach code in mgr.rs invokes flush_advisory after stopping
the `Tenant` object.
---------
Co-authored-by: Arpad Müller <arpad-m@users.noreply.github.com>
## Problem
Seen in CI for https://github.com/neondatabase/neon/pull/5453 -- the
time gap between validation completing and the header getting written is
long enough to fail the test, where it was doing a cheeky 1 second
sleep.
## Summary of changes
- Replace 1 second sleep with a wait_until to see the header file get
written
- Use enums as test params to make the results more readable (instead of
True-False parameters)
- Fix the temp suffix used for deletion queue headers: this worked fine,
but resulted in `..tmp` extension.
## Problem
Writes to the postgres client socket from the page server were not
wrapped in cancellation handling, so a stuck client connection could
prevent tenant shutdowwn.
## Summary of changes
All the places we call flush() to write to the socket, we should be
respecting the cancellation token for the task.
In this PR, I explicitly pass around a CancellationToken rather than
doing inline `task_mgr::shutdown_token` calls, to avoid coupling it to
the global task_mgr state and make it easier to refactor later.
I have some follow-on commits that add a Shutdown variant to QueryError
and use it more extensively, but that's pure refactor so will keep
separate from this bug fix PR.
Closes: https://github.com/neondatabase/neon/issues/5341
Part of #5172. First commits show that we used to allow starting up a
compute or creating a branch off a not yet uploaded timeline. This PR
moves activation of a timeline to happen **after** initial layer file(s)
(if any) and `index_part.json` have been uploaded. Simply moving
activation to be *after* downloads have finished works because we now
spawn a task per http request handler.
Current behaviour of uploading on the timelines on next startup is kept,
to be removed later as part of #5172.
Adds:
- `NeonCli.map_branch` and corresponding `neon_local` implementation:
allow creating computes for timelines managed via pageserver http
client/api
- possibly duplicate tests (I did not want to search for, will cleanup
in a follow-up if these duplicated)
Changes:
- make `wait_until_tenant_state` return immediatedly on `Broken` and not
wait more
## Problem
Pageservers with `control_plane_api` configured require a control plane
to start up: in an incident this might be a problem.
## Summary of changes
Note to reviewers: most of the code churn in mgr.rs is the refactor
commit that enables the later emergency mode commit: you may want to
review commits separately.
- Add `control_plane_emergency_mode` configuration property
- Refactor init_tenant_mgr to separate loading configurations from the
main loop where we construct Tenant, so that the generations fetch can
peek at the configs in emergency mode.
- During startup, in emergency mode, attach any tenants that were
attached on their last run, using the same generation number.
Closes: #5381
Closes: https://github.com/neondatabase/neon/issues/5492
## Problem
Spun off from https://github.com/neondatabase/neon/pull/5449
Timeline deletion does the following:
1. Delete layers referenced in the index
2. Delete everything else in the timeline prefix, except the index
3. Delete the index.
When generations were added, the filter in step 2 got outdated, such
that the index objects were deleted along with everything else at step
2. That didn't really break anything, but it makes an automated test
unhappy and is a violation of the original intent of the code, which
presumably intends to upload an invariant that as long as any objects
for a timeline exist, the index exists.
(Eventually, this index-object-last complexity can go away: when we do
https://github.com/neondatabase/neon/issues/5080, there is no need to
keep the index_part around, as deletions can always be retried any time
any where.)
## Summary of changes
After object listing, split the listed objects into layers and index
objects. Delete the layers first, then the index objects.
Doesn't do an upgrade of rustc to 1.73.0 as we want to wait for the
cargo response of the curl CVE before updating. In preparation for an
update, we address the clippy lints that are newly firing in 1.73.0.
Problem
=======
Prior to this PR, when we had a cache miss, we'd get back a write guard,
fill it, the drop it and retry the read from cache.
If there's severe contention for the cache, it could happen that the
just-filled data gets evicted before our retry, resulting in lost work
and no forward progress.
Solution
========
This PR leverages the now-available `tokio::sync::RwLockWriteGuard`'s
`downgrade()` functionality to turn the filled slot write guard into a
read guard.
We don't drop the guard at any point, so, forward progress is ensured.
Refs
====
Stacked atop https://github.com/neondatabase/neon/pull/5480
part of https://github.com/neondatabase/neon/issues/4743
specifically part of https://github.com/neondatabase/neon/issues/5479
If there are any layermap or layer file related problems, having a
reproducable `get_page@lsn` easily usable for fast debugging iteration
is helpful.
Split off from #4938.
Later evolved to add http apis for:
- `get_page@lsn` at
`/v1/tenant/:tenant_id/timeline/:timeline_id/get?key=<hex>&lsn=<lsn
string>`
- collecting the keyspace at
`/v1/tenant/:tenant_id/timeline/:timeline_id/keyspace?[at_lsn=<lsn
string>]`
- defaults to `last_record_lsn`
collecting the keyspace seems to yield some ranges for which there is no
key.
503 Resource Unavailable appears as error in logs, but is not really an
error which should ever fail a test on, or even log an error in prod,
[evidence].
Changes:
- log 503 as `info!` level
- use `Cow<'static, str>` instead of `String`
- add an additional `wait_until_tenant_active` in
`test_actually_duplicate_l1`
We ought to have in tests "wait for tenants to complete loading" but
this is easier to implement for now.
[evidence]:
https://neon-github-public-dev.s3.amazonaws.com/reports/pr-5485/6423110295/index.html#/testresult/182de66203864fc0
## Problem
This test was unstable when run in parallel with lots of others: if the
pageserver stayed up long enough for some of the deletions to get
validated, they won't be discarded on restart the way the test expects
when keep_attachment=True. This was a test bug, not a pageserver bug.
## Summary of changes
- Add failpoints to control plane api client
- Use failpoint to pause validation in the test to cover the case where
it had been flaky
- Add a metric for the number of deleted keys validated
- Add a permutation to the test to additionally exercise the case where
we _do_ validate lists before restart: this is a coverage enhancement
that seemed sensible when realizing that the test was relying on nothing
being validated before restart.
- the test will now always enter the restart with nothing or everything
validated.
## Problem
These changes are part of building seamless tenant migration, as
described in the RFC:
- https://github.com/neondatabase/neon/pull/5029
## Summary of changes
- A new configuration type `LocationConf` supersedes `TenantConfOpt` for
storing a tenant's configuration in the pageserver repo dir. It contains
`TenantConfOpt`, as well as a new `mode` attribute that describes what
kind of location this is (secondary, attached, attachment mode etc). It
is written to a file called `config-v1` instead of `config` -- this
prepares us for neatly making any other profound changes to the format
of the file in future. Forward compat for existing pageserver code is
achieved by writing out both old and new style files. Backward compat is
achieved by checking for the old-style file if the new one isn't found.
- The `TenantMap` type changes, to hold `TenantSlot` instead of just
`Tenant`. The `Tenant` type continues to be used for attached tenants
only. Tenants in other states (such as secondaries) are represented by a
different variant of `TenantSlot`.
- Where `Tenant` & `Timeline` used to hold an Arc<Mutex<TenantConfOpt>>,
they now hold a reference to a AttachedTenantConf, which includes the
extra information from LocationConf. This enables them to know the
current attachment mode.
- The attachment mode is used as an advisory input to decide whether to
do compaction and GC (AttachedStale is meant to avoid doing uploads,
AttachedMulti is meant to avoid doing deletions).
- A new HTTP API is added at `PUT /tenants/<tenant_id>/location_config`
to drive new location configuration. This provides a superset of the
functionality of attach/detach/load/ignore:
- Attaching a tenant is just configuring it in an attached state
- Detaching a tenant is configuring it to a detached state
- Loading a tenant is just the same as attaching it
- Ignoring a tenant is the same as configuring it into Secondary with
warm=false (i.e. retain the files on disk but do nothing else).
Caveats:
- AttachedMulti tenants don't do compaction in this PR, but they do in
the follow on #5397
- Concurrent updates to the `location_config` API are not handled
elegantly in this PR, a better mechanism is added in the follow on
https://github.com/neondatabase/neon/pull/5367
- Secondary mode is just a placeholder in this PR: the code to upload
heatmaps and do downloads on secondary locations will be added in a
later PR (but that shouldn't change any external interfaces)
Closes: https://github.com/neondatabase/neon/issues/5379
---------
Co-authored-by: Christian Schwarz <christian@neon.tech>
## Problem
In #5383 this configuration was added, but it missed the parts of the
Builder class that let it actually be used.
## Summary of changes
Add `control_plane_api_token` hooks to PageserverConfigBuilder
We overwrite L1 layers if compaction gets interrupted. We did not have a
test showing that we do in fact do this.
The test might be a bit flaky due to timestamp usage, but separating for
smaller diff in as part of #5172.
Also removes an unrelated 200s pgbench from the test suite.
Fixes#4689 by replacing all of `std::Path` , `std::PathBuf` with
`camino::Utf8Path`, `camino::Utf8PathBuf` in
- pageserver
- safekeeper
- control_plane
- libs/remote_storage
Co-authored-by: Joonas Koivunen <joonas@neon.tech>
We currently lose the actual reason the first walredo attempt failed.
Together with implicit retry making it difficult to eyeball what is
happening.
PR version keeps the logging the same error message twice, which is what
we've been doing all along. However correlating the retrying case and
the finally returned error is difficult, because the actual error
message was left out before this PR.
Lastly, log the final error we present to postgres *in the same span*,
not outside it. Additionally, suppress the stacktrace as the comment
suggested.
We have rare walredo failures with pg16.
Let's introduce recording of failing walredo input in `#[cfg(feature =
"testing")]`. There is additional logging (the value reconstruction path
logging usually shown with not found keys), keeping it for
`#[cfg(features = "testing")]`.
Cc: #5404.
## Problem
Duplication of error in log
Fixes#5366
## Summary of changes
Removed `{0}` from error description above each enum due to presence of
`#[source]` to avoid duplication
Signed-off-by: Rahul Modpur <rmodpur2@gmail.com>
## Problem
The 500 status code should only be used for bugs or unrecoverable
failures: situations we did not expect. Currently, the pageserver is
misusing this response code for some situations that are totally normal,
like requests targeting tenants that are in the process of activating.
The 503 response is a convenient catch-all for "I can't right now, but I
will be able to".
## Summary of changes
- Change some transient availability error conditions to return 503
instead of 500
- Update the HTTP client configuration in integration tests to retry on
503
After these changes, things like creating a tenant and then trying to
create a timeline within it will no longer require carefully checking
its status first, or retrying on 500s. Instead, a client which is
properly configured to retry on 503 can quietly handle such situations.
It is wasteful to cycle through the page cache slots trying to find a
victim slot if all the slots are currently un-evictable because a read /
write guard is alive.
We suspect this wasteful cycling to be the root cause for an
"indigestion" we observed in staging (#5291).
The hypothesis is that we `.await` after we get ahold of a read / write
guard, and that tokio actually deschedules us in favor of another
future.
If that other future then needs a page slot, it can't get ours because
we're holding the guard.
Repeat this, and eventually, the other future(s) will find themselves
doing `find_victim` until they hit `exceeded evict iter limit`.
The `find_victim` is wasteful and CPU-starves the futures that are
already holding the read/write guard. A `yield` inside `find_victim`
could mitigate the starvation, but wouldn't fix the wasting of CPU
cycles.
So instead, this PR queues waiters behind a tokio semaphore that counts
evictable slots.
The downside is that this stops the clock page replacement if we have 0
evictable slots.
Also, as explained by the big block comment in `find_victims`, the
semaphore doesn't fully prevent starvation because because we can't make
tokio prioritize those tasks executing `find_victim` that have been
trying the longest.
Implementation
===============
We need to acquire the semaphore permit before locking the slot.
Otherwise, we could deadlock / discover that all permits are gone and
would have to relinquish the slot, having moved forward the Clock LRU
without making progress.
The downside is that, we never get full throughput for read-heavy
workloads, because, until the reader coalesces onto an existing permit,
it'll hold its own permit.
Addendum To Root-Cause Analysis In #5291
========================================
Since merging that PR, @arpad-m pointed out that we couldn't have
reached the `slot.write().await` with his patches because the
VirtualFile slots can't have all been write-locked, because we only hold
them locked while the IO is ongoing, and the IO is still done with
synchronous system calls in that patch set, so, we can have had at most
$number_of_executor_threads locked at any given time.
I count 3 tokio runtimes that do `Timeline::get`, each with 8 executor
threads in our deployment => $number_of_executor_threads = 3*8 = 24 .
But the virtual file cache has 100 slots.
We both agree that nothing changed about the core hypothesis, i.e.,
additional await points inside VirtualFile caused higher concurrency
resulting in exhaustion of page cache slots.
But we'll need to reproduce the issue and investigate further to truly
understand the root cause, or find out that & why we were indeed using
100 VirtualFile slots.
TODO: could it be compaction that needs to hold guards of many
VirtualFile's in its iterators?
## Problem
Because `neon_local` by default runs with no remote storage, it was not
running the deletion queue workers, and the attempt to call into
`recover()` was failing.
This is a bogus configuration that will go away when we make remote
storage mandatory.
## Summary of changes
Don't try and do deletion queue recovery when remote storage is
disabled.
The reason we don't just unset `control_plane_api` to avoid this is that
generations will soon become mandatory, irrespective of when we make
remote storage mandatory.
Part of #5172. Builds upon #5243, #5298. Includes the test changes:
- no more RemoteStorageKind.NOOP
- no more testing of pageserver without remote storage
- benchmarks now use LOCAL_FS as well
Support for running without RemoteStorage is still kept but in practice,
there are no tests and should not be any tests.
Co-authored-by: Christian Schwarz <christian@neon.tech>
## Problem
Control plane API calls in prod will need authentication.
## Summary of changes
`control_plane_api_token` config is loaded and set as HTTP
`Authorization` header.
Closes: https://github.com/neondatabase/neon/issues/5139
## Problem
Pageservers must not delete objects or advertise updates to
remote_consistent_lsn without checking that they hold the latest
generation for the tenant in question (see [the RFC](
https://github.com/neondatabase/neon/blob/main/docs/rfcs/025-generation-numbers.md))
In this PR:
- A new "deletion queue" subsystem is introduced, through which
deletions flow
- `RemoteTimelineClient` is modified to send deletions through the
deletion queue:
- For GC & compaction, deletions flow through the full generation
verifying process
- For timeline deletions, deletions take a fast path that bypasses
generation verification
- The `last_uploaded_consistent_lsn` value in `UploadQueue` is replaced
with a mechanism that maintains a "projected" lsn (equivalent to the
previous property), and a "visible" LSN (which is the one that we may
share with safekeepers).
- Until `control_plane_api` is set, all deletions skip generation
validation
- Tests are introduced for the new functionality in
`test_pageserver_generations.py`
Once this lands, if a pageserver is configured with the
`control_plane_api` configuration added in
https://github.com/neondatabase/neon/pull/5163, it becomes safe to
attach a tenant to multiple pageservers concurrently.
---------
Co-authored-by: Joonas Koivunen <joonas@neon.tech>
Co-authored-by: Christian Schwarz <christian@neon.tech>
The TaskKind dimension added in #5339 is insufficient to understand what
kind of data causes the cache hits.
Regarding performance considerations: I'm not too worried because we're
moving from 3 to 4 one-byte sized fields; likely the space now used by
the new field was padding before. Didn't check this, though, and it
doesn't matter, we need the data.
What I don't like about this PR is that we have an `Unknown` content
type, and I also don't like that there's no compile-time way to assert
that it's set to something != `Unknown` when calling the page cache.
But, this is what I could come up with before tomorrow’s release, and I
think it covers the hot paths.
Should have added them in the initial PR #5186.
Would have been nice to test the failure cases as well, but, without
mocking the FS, that's too hard / platform-dependent.
This PR adds a `task_kind` label to page cache access metrics.
These are to validate our hypothesis that the high hit page cache rate
we observe in prod is due to internal tasks, not getpage requests from
compute.
We believe the latter should near-always be a pageserver-page-cache
_miss_ because compute has it's own page cache, and hence there is no
locality of reference for its accesses to pageserver page cache.
Before this PR, we didn't have `RequestContext` propagation to any code
below the on-demand downloader.
The vast majority of changes in this PR is concerned with adding that
propagation.
Split off from #5297. Builds upon #5326. Handles original review
comments which I did not move to earlier split PRs. Completes test
support for verifying events by notifying of the last batch of events.
Adds cleaning up of tempfiles left because of an unlucky shutdown or
SIGKILL.
Finally closes#5175.
Co-authored-by: Arpad Müller <arpad-m@users.noreply.github.com>
Write collected metrics to disk to recover previously sent metrics on
restart.
Recover the previously collected metrics during startup, send them over
at right time
- send cached synthetic size before actual is calculated
- when `last_record_lsn` rolls back on startup
- stay at last sent `written_size` metric
- send `written_size_delta_bytes` metric as 0
Add test support: stateful verification of events in python tests.
Fixes: #5206
Cc: #5175 (loggings, will be enhanced in follow-up)
Split off from #5297.
There should be no functional changes here:
- refactor tenant metric "production" like previously timeline, allows
unit testing, though not interesting enough yet to test
- introduce type aliases for tuples
- extra refactoring for `collect`, was initially thinking it was useful
but will do a inline later
- shorter binding names
- support for future allocation reuse quests with IdempotencyKey
- move code out of tokio::select to make it rustfmt-able
- generification, allow later replacement of `&'static str` with enum
- add tests that assert sent event contents exactly
## Problem
VM should be updated if XLH_LOCK_ALL_FROZEN_CLEARED flags is set in
XLOG_HEAP_LOCK,XLOG_HEAP_2_LOCK_UPDATED WAL records
## Summary of changes
Add handling of this records in walingest.rs
## Checklist before requesting a review
- [ ] I have performed a self-review of my code.
- [ ] If it is a core feature, I have added thorough tests.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [ ] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
## Checklist before merging
- [ ] Do not forget to reformat commit message to not include the above
checklist
---------
Co-authored-by: Konstantin Knizhnik <knizhnik@neon.tech>
## Problem
See https://neondb.slack.com/archives/C05L7D1JAUS/p1694614585955029https://www.notion.so/neondatabase/Duplicate-key-issue-651627ce843c45188fbdcb2d30fd2178
## Summary of changes
Swap old/new block references
## Checklist before requesting a review
- [ ] I have performed a self-review of my code.
- [ ] If it is a core feature, I have added thorough tests.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [ ] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
## Checklist before merging
- [ ] Do not forget to reformat commit message to not include the above
checklist
---------
Co-authored-by: Konstantin Knizhnik <knizhnik@neon.tech>
Co-authored-by: Heikki Linnakangas <heikki@neon.tech>
Motivation
==========
We observed two "indigestion" events on staging, each shortly after
restarting `pageserver-0.eu-west-1.aws.neon.build`. It has ~8k tenants.
The indigestion manifests as `Timeline::get` calls failing with
`exceeded evict iter limit` .
The error is from `page_cache.rs`; it was unable to find a free page and
hence failed with the error.
The indigestion events started occuring after we started deploying
builds that contained the following commits:
```
[~/src/neon]: git log --oneline c0ed362790caa368aa65ba57d352a2f1562fd6bf..15eaf78083ecff62b7669
091da1a1c8b4f60ebf8
15eaf7808 Disallow block_in_place and Handle::block_on (#5101)
a18d6d9ae Make File opening in VirtualFile async-compatible (#5280)
76cc87398 Use tokio locks in VirtualFile and turn with_file into macro (#5247)
```
The second and third commit are interesting.
They add .await points to the VirtualFile code.
Background
==========
On the read path, which is the dominant user of page cache & VirtualFile
during pageserver restart, `Timeline::get` `page_cache` and VirtualFile
interact as follows:
1. Timeline::get tries to read from a layer
2. This read goes through the page cache.
3. If we have a page miss (which is known to be common after restart),
page_cache uses `find_victim` to find an empty slot, and once it has
found a slot, it gives exclusive ownership of it to the caller through a
`PageWriteGuard`.
4. The caller is supposed to fill the write guard with data from the
underlying backing store, i.e., the layer `VirtualFile`.
5. So, we call into `VirtualFile::read_at`` to fill the write guard.
The `find_victim` method finds an empty slot using a basic
implementation of clock page replacement algorithm.
Slots that are currently in use (`PageReadGuard` / `PageWriteGuard`)
cannot become victims.
If there have been too many iterations, `find_victim` gives up with
error `exceeded evict iter limit`.
Root Cause For Indigestion
==========================
The second and third commit quoted in the "Motivation" section
introduced `.await` points in the VirtualFile code.
These enable tokio to preempt us and schedule another future __while__
we hold the `PageWriteGuard` and are calling `VirtualFile::read_at`.
This was not possible before these commits, because there simply were no
await points that weren't Poll::Ready immediately.
With the offending commits, there is now actual usage of
`tokio::sync::RwLock` to protect the VirtualFile file descriptor cache.
And we __know__ from other experiments that, during the post-restart
"rush", the VirtualFile fd cache __is__ too small, i.e., all slots are
taken by _ongoing_ VirtualFile operations and cannot be victims.
So, assume that VirtualFile's `find_victim_slot`'s
`RwLock::write().await` calls _will_ yield control to the executor.
The above can lead to the pathological situation if we have N runnable
tokio tasks, each wanting to do `Timeline::get`, but only M slots, N >>
M.
Suppose M of the N tasks win a PageWriteGuard and get preempted at some
.await point inside `VirtualFile::read_at`.
Now suppose tokio schedules the remaining N-M tasks for fairness, then
schedules the first M tasks again.
Each of the N-M tasks will run `find_victim()` until it hits the
`exceeded evict iter limit`.
Why? Because the first M tasks took all the slots and are still holding
them tight through their `PageWriteGuard`.
The result is massive wastage of CPU time in `find_victim()`.
The effort to find a page is futile, but each of the N-M tasks still
attempts it.
This delays the time when tokio gets around to schedule the first M
tasks again.
Eventually, tokio will schedule them, they will make progress, fill the
`PageWriteGuard`, release it.
But in the meantime, the N-M tasks have already bailed with error
`exceeded evict iter limit`.
Eventually, higher level mechanisms will retry for the N-M tasks, and
this time, there won't be as many concurrent tasks wanting to do
`Timeline::get`.
So, it will shake out.
But, it's a massive indigestion until then.
This PR
=======
This PR reverts the offending commits until we find a proper fix.
```
Revert "Use tokio locks in VirtualFile and turn with_file into macro (#5247)"
This reverts commit 76cc87398c.
Revert "Make File opening in VirtualFile async-compatible (#5280)"
This reverts commit a18d6d9ae3.
```
This adds PostgreSQL 16 as a vendored postgresql version, and adapts the
code to support this version.
The important changes to PostgreSQL 16 compared to the PostgreSQL 15
changeset include the addition of a neon_rmgr instead of altering Postgres's
original WAL format.
Co-authored-by: Alexander Bayandin <alexander@neon.tech>
Co-authored-by: Heikki Linnakangas <heikki@neon.tech>
