## Problem
https://github.com/neondatabase/neon/pull/7637 breaks forward compat
test.
On commit ea531d448e.
https://neon-github-public-dev.s3.amazonaws.com/reports/main/8988324349/index.html
```
test_create_snapshot
2024-05-07T16:03:11.331883Z INFO version: git-env:ea531d448eb65c4f58abb9ef7d8cd461952f7c5f failpoints: true, features: ["testing"] launch_timestamp: 2024-05-07 16:03:11.316131763 UTC build_tag: build_tag-env:5159
test_forward_compatibility
2024-05-07T16:07:02.310769Z INFO version: git-env:ea531d448eb65c4f58abb9ef7d8cd461952f7c5f failpoints: true, features: ["testing"] launch_timestamp: 2024-05-07 16:07:02.294676183 UTC build_tag: build_tag-env:5159
```
The forward compatibility test is actually using the same tag as the
current build.
The commit before that,
https://neon-github-public-dev.s3.amazonaws.com/reports/main/8988126011/index.html
```
test_create_snapshot
2024-05-07T15:47:21.900796Z INFO version: git-env:2dbd1c1ed5cd0458933e8ffd40a9c0a5f4d610b8 failpoints: true, features: ["testing"] launch_timestamp: 2024-05-07 15:47:21.882784185 UTC build_tag: build_tag-env:5158
test_forward_compatibility
2024-05-07T15:50:48.828733Z INFO version: git-env:c4d7d5982553d2cf66634d1fbf85d95ef44a6524 failpoints: true, features: ["testing"] launch_timestamp: 2024-05-07 15:50:48.816635176 UTC build_tag: build_tag-env:release-5434
```
This pull request patches the bin path so that the new neon_local will
use the old binary.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
- Rename "filename" types which no longer map directly to a filename
(LayerFileName -> LayerName)
- Add a -v1- part to local layer paths to smooth the path to future
updates (we anticipate a -v2- that uses checksums later)
- Rename methods that refer to the string-ized version of a LayerName to
no longer be called "filename"
- Refactor reconcile() function to use a LocalLayerFileMetadata type
that includes the local path, rather than carrying local path separately
in a tuple and unwrap()'ing it later.
Before this PR, `neon_local` would store a copy of a subset of the
initial `pageserver.toml` in its `.neon/config`, e.g, `listen_pg_addr`.
That copy is represented as `struct PageServerConf`.
This copy was used to inform e.g., `neon_local endpoint` and other
commands that depend on Pageserver about which port to connect to.
The problem with that scheme is that the duplicated information in
`.neon/config` can get stale if `pageserver.toml` is changed.
This PR fixes that by eliminating populating `struct PageServerConf`
from the `pageserver.toml`s.
The `[[pageservers]]` TOML table in the `.neon/config` is obsolete.
As of this PR, `neon_local` will fail to start and print an error
informing about this change.
Code-level changes:
- Remove the `--pg-version` flag, it was only used for some checks
during `neon_local init`
- Remove the warn-but-continue behavior for when auth key creation fails
but auth keys are not required. It's just complexity that is unjustified
for a tool like `neon_local`.
- Introduce a type-system-level distinction between the runtime state
and the two (!) toml formats that are almost the same but not quite.
- runtime state: `struct PageServerConf`, now without `serde` derives
- toml format 1: the state in `.neon/config` => `struct OnDiskState`
- toml format 2: the `neon_local init --config TMPFILE` that, unlike
`struct OnDiskState`, allows specifying `pageservers`
- Remove `[[pageservers]]` from the `struct OnDiskState` and load the
data from the individual `pageserver.toml`s instead.
## Problem
In https://github.com/neondatabase/neon/pull/7531, we would like to be
able to rewrite layers safely. One option is to make `Layer` able to
rewrite files in place safely (e.g. by blocking evictions/deletions for
an old Layer while a new one is created), but that's relatively fragile.
It's more robust in general if we simply never overwrite the same local
file: we can do that by putting the generation number in the filename.
## Summary of changes
- Add `local_layer_path` (counterpart to `remote_layer_path`) and
convert all locations that manually constructed a local layer path by
joining LayerFileName to timeline path
- In the layer upload path, construct remote paths with
`remote_layer_path` rather than trying to build them out of a local
path.
- During startup, carry the full path to layer files through
`init::reconcile`, and pass it into `Layer::for_resident`
- Add a test to make sure we handle upgrades properly.
- Comment out the generation part of `local_layer_path`, since we need
to maintain forward compatibility for one release. A tiny followup PR
will enable it afterwards.
We could make this a bit simpler if we bulk renamed existing layers on
startup instead of carrying literal paths through init, but that is
operationally risky on existing servers with millions of layer files. We
can always do a renaming change in future if it becomes annoying, but
for the moment it's kind of nice to have a structure that enables us to
change local path names again in future quite easily.
We should rename `LayerFileName` to `LayerName` or somesuch, to make it
more obvious that it's not a literal filename: this was already a bit
confusing where that type is used in remote paths. That will be a
followup, to avoid polluting this PR's diff.
This pull request adds the new basebackup read path + aux file write
path. In the regression test, all logical replication tests are run with
matrix aux_file_v2=false/true.
Also fixed the vectored get code path to correctly return missing key
error when being called from the unified sequential get code path.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
Preceding PR https://github.com/neondatabase/neon/pull/7613 reduced the
usage of `--pageserver-config-override`.
This PR builds on top of that work and fully removes the `neon_local
--pageserver-config-override`.
Tests that need a non-default `pageserver.toml` control it using two
options:
1. Specify `NeonEnvBuilder.pageserver_config_override` before
`NeonEnvBuilder.init_start()`. This uses a new `neon_local init
--pageserver-config` flag.
2. After `init_start()`: `env.pageserver.stop()` +
`NeonPageserver.edit_config_toml()` + `env.pageserver.start()`
A few test cases were using
`env.pageserver.start(overrides=("--pageserver-config-override...",))`.
I changed them to use one of the options above.
Future Work
-----------
The `neon_local init --pageserver-config` flag still uses `pageserver
--config-override` under the hood. In the future, neon_local should just
write the `pageserver.toml` directly.
The `NeonEnvBuilder.pageserver_config_override` field should be renamed
to `pageserver_initial_config`. Let's save this churn for a separate
refactor commit.
The `test_forward_compatibility` test runs the old production binaries,
but is supposed to always run the latest neon_local binary.
I think commit 6acbee23 broke that by accident because in that commit,
`from_repo_dir` is introduced and runs an `init_start()` before the
`test_forward_compatibility` gets a chance to patch up the
neon_local_binpath.
## Problem
Ref https://neondb.slack.com/archives/C036U0GRMRB/p1688122168477729
## Summary of changes
- Add sha from postgres repo into postgres version string (via
`--with-extra-version`)
- Add a test that Postgres version matches the expected one
- Remove build-time hard check and allow only related tests to fail
## Problem
Timelines cannot be deleted if they have children. In many production
cases, a branch or a timeline has been created off the main branch for
various reasons to the effect of having now a "new main" branch. This
feature will make it possible to detach a timeline from its ancestor by
inheriting all of the data before the branchpoint to the detached
timeline and by also reparenting all of the ancestor's earlier branches
to the detached timeline.
## Summary of changes
- Earlier added copy_lsn_prefix functionality is used
- RemoteTimelineClient learns to adopt layers by copying them from
another timeline
- LayerManager adds support for adding adopted layers
-
`timeline::Timeline::{prepare_to_detach,complete_detaching}_from_ancestor`
and `timeline::detach_ancestor` are added
- HTTP PUT handler
Cc: #6994
Co-authored-by: Christian Schwarz <christian@neon.tech>
Changes parameters to fix the flakiness of `test_ts_of_lsn_api`. Already
now, the amount of flakiness of the test is pretty low. With this, it's
even lower.
cc #5768
## Problem
Issues around operation and tenant locks would have been hard to debug
since there was little observability around them.
## Summary of changes
- As suggested in the issue, a wrapper was added around
`OwnedRwLockWriteGuard` called `IdentifierLock` that removes the
operation currently holding the exclusive lock when it's dropped.
- The value in `IdLockMap` was extended to hold a pair of locks and
operations that can be accessed and locked independently.
- When requesting an exclusive lock besides returning the lock on that
resource, an operation is changed if the lock is acquired.
Closes https://github.com/neondatabase/neon/issues/7108
## Problem
Storage controller was observed to have unexpectedly large memory
consumption when loaded with many thousands of shards.
This was recently fixed:
- https://github.com/neondatabase/neon/pull/7493
...but we need a general test that the controller is well behaved with
thousands of shards.
Closes: https://github.com/neondatabase/neon/issues/7460
Closes: https://github.com/neondatabase/neon/issues/7463
## Summary of changes
- Add test test_storage_controller_many_tenants to exercise the system's
behaviour with a more substantial workload. This test measures memory
consumption and reproduces #7460 before the other changes in this PR.
- Tweak reconcile_all's return value to make it nonzero if it spawns no
reconcilers, but _would_ have spawned some reconcilers if they weren't
blocked by the reconcile concurrency limit. This makes the test's
reconcile_until_idle behave as expected (i.e. not complete until the
system is nice and calm).
- Fix an issue where tenant migrations would leave a spurious secondary
location when migrated to some location that was not already their
secondary (this was an existing low-impact bug that tripped up the
test's consistency checks).
On the test with 8000 shards, the resident memory per shard is about
20KiB. This is not really per-shard memory: the primary source of memory
growth is the number of concurrent network/db clients we create.
With 8000 shards, the test takes 125s to run on my workstation.
It works by listing postgres table with memory dump of safekeepers state. s3
contents for each timeline are checked then against timeline_start_lsn and
backup_lsn. If inconsistency is found, before complaining timeline (branch) is
checked at control plane; it might have been deleted between the dump take and
s3 check.
## Problem
Benchmarks don't use the vectored read path.
## Summary of changes
* Update the benchmarks to use the vectored read path for both singular
and vectored gets.
* Disable validation for the benchmarks
## Problem
Downloading tenant data for analysis/debug with `aws s3 cp` works well
for small tenants, but for larger tenants it is unlikely that one ends
up with an index that matches layer files, due to the time taken to
download.
## Summary of changes
- Add a `tenant-snapshot` command to the scrubber, which reads timeline
indices and then downloads the layers referenced in the index, even if
they were deleted. The result is a snapshot of the tenant's remote
storage state that should be usable when imported (#7399 ).
## Problem
Sometimes we have test data in the form of S3 contents that we would
like to run live in a neon_local environment.
## Summary of changes
- Add a storage controller API that imports an existing tenant.
Currently this is equivalent to doing a create with a high generation
number, but in future this would be something smarter to probe S3 to
find the shards in a tenant and find generation numbers.
- Add a `neon_local` command that invokes the import API, and then
inspects timelines in the newly attached tenant to create matching
branches.
## Problem
We are currently supporting two read paths. No bueno.
## Summary of changes
High level: use vectored read path to serve get page requests - gated by
`get_impl` config
Low level:
1. Add ps config, `get_impl` to specify which read path to use when
serving get page requests
2. Fix base cached image handling for the vectored read path. This was
subtly broken: previously we
would not mark keys that went past their cached lsn as complete. This is
a self standing change which
could be its own PR, but I've included it here because writing separate
tests for it is tricky.
3. Fork get page to use either the legacy or vectored implementation
4. Validate the use of vectored read path when serving get page requests
against the legacy implementation.
Controlled by `validate_vectored_get` ps config.
5. Use the vectored read path to serve get page requests in tests (with
validation).
## Note
Since the vectored read path does not go through the page cache to read
buffers, this change also amounts to a removal of the buffer page cache. Materialized page cache
is still used.
## Problem
We recently went through an incident where compaction was inhibited by a
bug. We didn't observe this until quite late because we did not have alerting
on deep reads.
## Summary of changes
+ Tweak an existing metric that tracks the depth of a read on the
non-vectored read path:
* Give it a better name
* Track all layers
* Larger buckets
+ Add a similar metric for the vectored read path
+ Add a compaction smoke test which uses these metrics. This test would
have caught
the compaction issue mentioned earlier.
Related https://github.com/neondatabase/neon/issues/7428
## Problem
test_sharding_smoke recently got an added section that checks deletion
of a sharded tenant. The storage controller does a retry loop for
deletion, waiting for a 404 response. When deletion is a bit slow (debug
builds), the retry of deletion was getting a 500 response -- this caused
the test to become flaky (example failure:
https://neon-github-public-dev.s3.amazonaws.com/reports/release-proxy/8659801445/index.html#testresult/b4cbf5b58190f60e/retries)
There was a false comment in the code:
```
match tenant.current_state() {
TenantState::Broken { .. } | TenantState::Stopping { .. } => {
- // If a tenant is broken or stopping, DeleteTenantFlow can
- // handle it: broken tenants proceed to delete, stopping tenants
- // are checked for deletion already in progress.
```
If the tenant is stopping, DeleteTenantFlow does not in fact handle it,
but returns a 500-yielding errror.
## Summary of changes
Before calling into DeleteTenantFlow, if the tenant is in
stopping|broken state then return 202 if a deletion is in progress. This
makes the API friendlier for retries.
The historic AlreadyInProgress (409) response still exists for if we
enter DeleteTenantFlow and unexpectedly see the tenant stopping. That
should go away when we implement #5080 . For the moment, callers that
handle 409s should continue to do so.
## Problem
Ingest filtering wasn't being applied to timeline creations, so a
timeline created on a sharded tenant would use 20MB+ on each shard (each
shard got a full copy). This didn't break anything, but is inefficient
and leaves the system in a harder-to-validate state where shards
initially have some data that they will eventually drop during
compaction.
Closes: https://github.com/neondatabase/neon/issues/6649
## Summary of changes
- in `import_rel`, filter block-by-block with is_key_local
- During test_sharding_smoke, check that per-shard physical sizes are as
expected
- Also extend the test to check deletion works as expected (this was an
outstanding tech debt task)
## Problem
When a location_conf request was repeated with no changes, we failed to
build the list of shards in the result.
## Summary of changes
Remove conditional that only generated a list of updates if something
had really changed. This does some redundant database updates, but it is
preferable to having a whole separate code path for no-op changes.
---------
Co-authored-by: Arpad Müller <arpad-m@users.noreply.github.com>
## Problem
In the test for https://github.com/neondatabase/neon/pull/6776, a test
cases uses tiny layer sizes and tiny stripe sizes. This hits a scenario
where a shard's checkpoint interval spans a region where none of the
content in the WAL is ingested by this shard. Since there is no layer to
flush, we do not advance disk_consistent_lsn, and this causes the test
to fail while waiting for LSN to advance.
## Summary of changes
- Pass an LSN through `layer_flush_start_tx`. This is the LSN to which
we have frozen at the time we ask the flush to flush layers frozen up to
this point.
- In the layer flush task, if the layers we flush do not reach
`frozen_to_lsn`, then advance disk_consistent_lsn up to this point.
- In `maybe_freeze_ephemeral_layer`, handle the case where
last_record_lsn has advanced without writing a layer file: this ensures
that disk_consistent_lsn and remote_consistent_lsn advance anyway.
The net effect is that the disk_consistent_lsn is allowed to advance
past regions in the WAL where a shard ingests no data, and that we
uphold our guarantee that remote_consistent_lsn always eventually
reaches the tip of the WAL.
The case of no layer at all is hard to test at present due to >0 shards
being polluted with SLRU writes, but I have tested it locally with a
branch that disables SLRU writes on shards >0. We can tighten up the
testing on this in future as/when we refine shard filtering (currently
shards >0 need the SLRU because they use it to figure out cutoff in GC
using timestamp-to-lsn).
## Problem
(Follows https://github.com/neondatabase/neon/pull/7237)
Some API users will query a tenant to wait for it to activate.
Currently, we return the current status of the tenant, whatever that may
be. Under heavy load, a pageserver starting up might take a long time to
activate such a tenant.
## Summary of changes
- In `tenant_status` handler, call wait_to_become_active on the tenant.
If the tenant is currently waiting for activation, this causes it to
skip the queue, similiar to other API handlers that require an active
tenant, like timeline creation. This avoids external services waiting a
long time for activation when polling GET /v1/tenant/<id>.
- Cleanup from
https://github.com/neondatabase/neon/pull/7040#discussion_r1521120263 --
in that PR, we needed to let compat tests manually register a node,
because it would run an old binary that doesn't self-register.
- Cleanup vectored get config workaround
- Cleanup a log allow list for which the underlying log noise has been
fixed.
## Problem
In the event of bugs with scheduling or reconciliation, we need to be
able to switch this off at a per-tenant granularity.
This is intended to mitigate risk of issues with
https://github.com/neondatabase/neon/pull/7181, which makes scheduling
more involved.
Closes: #7103
## Summary of changes
- Introduce a scheduling policy per tenant, with API to set it
- Refactor persistent.rs helpers for updating tenants to be more general
- Add tests
## Problem
https://github.com/neondatabase/neon/pull/7227 destabilized various
tests in the performance suite, with log errors during shutdown. It's
because we switched shutdown order to stop the storage controller before
the pageservers.
## Summary of changes
- Tolerate "connection failed" errors from pageservers trying to
validation their deletion queue.
## Problem
- Creations were not idempotent (unique key violation)
- Creations waited for reconciliation, which control plane blocks while
an operation is in flight
## Summary of changes
- Handle unique key constraint violation as an OK situation: if we're
creating the same tenant ID and shard count, it's reasonable to assume
this is a duplicate creation.
- Make the wait for reconcile during creation tolerate failures: this is
similar to location_conf, where the cloud control plane blocks our
notification calls until it is done with calling into our API (in future
this constraint is expected to relax as the cloud control plane learns
to run multiple operations concurrently for a tenant)
This test had two flaky failure modes:
- pageserver log error for timeline not found: this resulted from
changes for DR when timeline destroy/create was added, but endpoint was
left running during that operation.
- storage controller log error because the test was running for long
enough that a background reconcile happened at almost the exact moment
of test teardown, and our test fixtures tear down the pageservers before
the controller.
Closes: #7224
## Problem
Large quantities of ephemeral layer data can lead to excessive memory
consumption (https://github.com/neondatabase/neon/issues/6939). We
currently don't have a way to know how much ephemeral layer data is
present on a pageserver.
Before we can add new behaviors to proactively roll layers in response
to too much ephemeral data, we must calculate that total.
Related: https://github.com/neondatabase/neon/issues/6916
## Summary of changes
- Create GlobalResources and GlobalResourceUnits types, where timelines
carry a GlobalResourceUnits in their TimelineWriterState.
- Periodically update the size in GlobalResourceUnits:
- During tick()
- During layer roll
- During put() if the latest value has drifted more than 10MB since our
last update
- Expose the value of the global ephemeral layer bytes counter as a
prometheus metric.
- Extend the lifetime of TimelineWriterState:
- Instead of dropping it in TimelineWriter::drop, let it remain.
- Drop TimelineWriterState in roll_layer: this drops our guard on the
global byte count to reflect the fact that we're freezing the layer.
- Ensure the validity of the later in the writer state by clearing the
state in the same place we freeze layers, and asserting on the
write-ability of the layer in `writer()`
- Add a 'context' parameter to `get_open_layer_action` so that it can
skip the prev_lsn==lsn check when called in tick() -- this is needed
because now tick is called with a populated state, where
prev_lsn==Some(lsn) is true for an idle timeline.
- Extend layer rolling test to use this metric
- Remove code for using AWS secrets manager, as we're deploying with
k8s->env vars instead
- Load each secret independently, so that one can mix CLI args with
environment variables, rather than requiring that all secrets are loaded
with the same mechanism.
- Add a 'strict mode', enabled by default, which will refuse to start if
secrets are not loaded. This avoids the risk of accidentially disabling
auth by omitting the public key, for example
Stacks on:
- https://github.com/neondatabase/neon/pull/7165
Fixes while working on background optimization of scheduling after a
split:
- When a tenant has secondary locations, we weren't detaching the parent
shards' secondary locations when doing a split
- When a reconciler detaches a location, it was feeding back a
locationconf with `Detached` mode in its `observed` object, whereas it
should omit that location. This could cause the background reconcile
task to keep kicking off no-op reconcilers forever (harmless but
annoying).
- During shard split, we were scheduling secondary locations for the
child shards, but no reconcile was run for these until the next time the
background reconcile task ran. Creating these ASAP is useful, because
they'll be used shortly after a shard split as the destination locations
for migrating the new shards to different nodes.
This is a mixed bag of changes split out for separate review while
working on other things, and batched together to reduce load on CI
runners. Each commits stands alone for review purposes:
- do_tenant_shard_split was a long function and had a synchronous
validation phase at the start that could readily be pulled out into a
separate function. This also avoids the special casing of
ApiError::BadRequest when deciding whether an abort is needed on errors
- Add a 'describe' API (GET on tenant ID) that will enable storcon-cli
to see what's going on with a tenant
- the 'locate' API wasn't really meant for use in the field. It's for
tests: demote it to the /debug/ prefix
- The `Single` placement policy was a redundant duplicate of Double(0),
and Double was a bad name. Rename it Attached.
(https://github.com/neondatabase/neon/issues/7107)
- Some neon_local commands were added for debug/demos, which are now
replaced by commands in storcon-cli (#7114 ). Even though that's not
merged yet, we don't need the neon_local ones any more.
Closes https://github.com/neondatabase/neon/issues/7107
## Backward compat of Single/Double -> `Attached(n)` change
A database migration is used to convert any existing values.
## Problem
As with the pageserver, we should fail tests that emit unexpected log
errors/warnings.
## Summary of changes
- Refactor existing log checks to be reusable
- Run log checks for attachment_service
- Add allow lists as needed.
Add shard_number to PageserverFeedback and parse it on the compute side.
When compute receives a new ps_feedback, it calculates min LSNs among
feedbacks from all shards, and uses those LSNs for backpressure.
Add `test_sharding_backpressure` to verify that backpressure slows down
compute to wait for the slowest shard.
## Problem
The existing secondary download API relied on the caller to wait as long
as it took to complete -- for large shards that could be a long time, so
typical clients that might have a baked-in ~30s timeout would have a
problem.
## Summary of changes
- Take a `wait_ms` query parameter to instruct the pageserver how long
to wait: if the download isn't complete in this duration, then 201 is
returned instead of 200.
- For both 200 and 201 responses, include response body describing
download progress, in terms of layers and bytes. This is sufficient for
the caller to track how much data is being transferred and log/present
that status.
- In storage controller live migrations, use this API to apply a much
longer outer timeout, with smaller individual per-request timeouts, and
log the progress of the downloads.
- Add a test that injects layer download delays to exercise the new
behavior
Switched the order; doing https://github.com/neondatabase/neon/pull/6139
first then can remove uninit marker after.
## Problem
Previously, existence of a timeline directory was treated as evidence of
the timeline's logical existence. That is no longer the case since we
treat remote storage as the source of truth on each startup: we can
therefore do without this mark file.
The mark file had also been used as a pseudo-lock to guard against
concurrent creations of the same TimelineId -- now that persistence is
no longer required, this is a bit unwieldy.
In #6139 the `Tenant::timelines_creating` was added to protect against
concurrent creations on the same TimelineId, making the uninit mark file
entirely redundant.
## Summary of changes
- Code that writes & reads mark file is removed
- Some nearby `pub` definitions are amended to `pub(crate)`
- `test_duplicate_creation` is added to demonstrate that mutual
exclusion of creations still works.
## Problem
If a pageserver was offline when the storage controller started, there
was no mechanism to update the
storage controller state when the pageserver becomes active.
## Summary of changes
* Add a heartbeater module. The heartbeater must be driven by an
external loop.
* Integrate the heartbeater into the service.
- Extend the types used by the service and scheduler to keep track of a
nodes' utilisation score.
- Add a background loop to drive the heartbeater and update the state
based on the deltas it generated
- Do an initial round of heartbeats at start-up
# Problem
While investigating #7124, I noticed that the benchmark was always using
the `DEFAULT_*` `virtual_file_io_engine` , i.e., `tokio-epoll-uring` as
of https://github.com/neondatabase/neon/pull/7077.
The fundamental problem is that the `control_plane` code has its own
view of `PageServerConfig`, which, I believe, will always be a subset of
the real pageserver's `pageserver/src/config.rs`.
For the `virtual_file_io_engine` and `get_vectored_impl` parametrization
of the test suite, we were constructing a dict on the Python side that
contained these parameters, then handed it to
`control_plane::PageServerConfig`'s derived `serde::Deserialize`.
The default in serde is to ignore unknown fields, so, the Deserialize
impl silently ignored the fields.
In consequence, the fields weren't propagated to the `pageserver --init`
call, and the tests ended up using the
`pageserver/src/config.rs::DEFAULT_` values for the respective options
all the time.
Tests that explicitly used overrides in `env.pageserver.start()` and
similar were not affected by this.
But, it means that all the test suite runs where with parametrization
didn't properly exercise the code path.
# Changes
- use `serde(deny_unknown_fields)` to expose the problem
- With this change, the Python tests that override
`virtual_file_io_engine` and
`get_vectored_impl` fail on `pageserver --init`, exposing the problem.
- use destructuring to uncover the issue in the future
- fix the issue by adding the missing fields to the `control_plane`
crate's `PageServerConf`
- A better solution would be for control plane to re-use a struct
provided
by the pageserver crate, so that everything is in one place in
`pageserver/src/config.rs`, but, our config parsing code is (almost)
beyond repair anyways.
- fix the `pageserver_virtual_file_io_engine` to be responsive to the
env var
- => required to make parametrization work in benchmarks
# Testing
Before merging this PR, I re-ran the regression tests & CI with the full
matrix of `virtual_file_io_engine` and `tokio-epoll-uring`, see
9c7ea364e0
## Problem
Shard splits worked, but weren't safe against failures (e.g. node crash
during split) yet.
Related: #6676
## Summary of changes
- Introduce async rwlocks at the scope of Tenant and Node:
- exclusive tenant lock is used to protect splits
- exclusive node lock is used to protect new reconciliation process that
happens when setting node active
- exclusive locks used in both cases when doing persistent updates (e.g.
node scheduling conf) where the update to DB & in-memory state needs to
be atomic.
- Add failpoints to shard splitting in control plane and pageserver
code.
- Implement error handling in control plane for shard splits: this
detaches child chards and ensures parent shards are re-attached.
- Crash-safety for storage controller restarts requires little effort:
we already reconcile with nodes over a storage controller restart, so as
long as we reset any incomplete splits in the DB on restart (added in
this PR), things are implicitly cleaned up.
- Implement reconciliation with offline nodes before they transition to
active:
- (in this context reconciliation means something like
startup_reconcile, not literally the Reconciler)
- This covers cases where split abort cannot reach a node to clean it
up: the cleanup will eventually happen when the node is marked active,
as part of reconciliation.
- This also covers the case where a node was unavailable when the
storage controller started, but becomes available later: previously this
allowed it to skip the startup reconcile.
- Storage controller now terminates on panics. We only use panics for
true "should never happen" assertions, and these cases can leave us in
an un-usable state if we keep running (e.g. panicking in a shard split).
In the unlikely event that we get into a crashloop as a result, we'll
rely on kubernetes to back us off.
- Add `test_sharding_split_failures` which exercises a variety of
failure cases during shard split.
## Problem
hyper auto-cancels the request futures on connection close.
`sql_over_http::handle` is not 'drop cancel safe', so we need to do some
other work to make sure connections are queries in the right way.
## Summary of changes
1. tokio::spawn the request handler to resolve the initial cancel-safety
issue
2. share a cancellation token, and cancel it when the request `Service`
is dropped.
3. Add a new log span to be able to track the HTTP connection lifecycle.
