Based on https://github.com/neondatabase/neon/pull/11139
## Problem
We want to export performance traces from the pageserver in OTEL format.
End goal is to see them in Grafana.
## Summary of changes
https://github.com/neondatabase/neon/pull/11139 introduces the
infrastructure required to run the otel collector alongside the
pageserver.
### Design
Requirements:
1. We'd like to avoid implementing our own performance tracing stack if
possible and use the `tracing` crate if possible.
2. Ideally, we'd like zero overhead of a sampling rate of zero and be a
be able to change the tracing config for a tenant on the fly.
3. We should leave the current span hierarchy intact. This includes
adding perf traces without modifying existing tracing.
To satisfy (3) (and (2) in part) a separate span hierarchy is used.
`RequestContext` gains an optional `perf_span` member
that's only set when the request was chosen by sampling. All perf span
related methods added to `RequestContext` are no-ops for requests that
are not sampled.
This on its own is not enough for (3), so performance spans use a
separate tracing subscriber. The `tracing` crate doesn't have great
support for this, so there's a fair amount of boilerplate to override
the subscriber at all points of the perf span lifecycle.
### Perf Impact
[Periodic
pagebench](https://neonprod.grafana.net/d/ddqtbfykfqfi8d/e904990?orgId=1&from=2025-02-08T14:15:59.362Z&to=2025-03-10T14:15:59.362Z&timezone=utc)
shows no statistically significant regression with a sample ratio of 0.
There's an annotation on the dashboard on 2025-03-06.
### Overview of changes:
1. Clean up the `RequestContext` API a bit. Namely, get rid of the
`RequestContext::extend` API and use the builder instead.
2. Add pageserver level configs for tracing: sampling ratio, otel
endpoint, etc.
3. Introduce some perf span tracking utilities and expose them via
`RequestContext`. We add a `tracing::Span` wrapper to be used for perf
spans and a `tracing::Instrumented` equivalent for it. See doc comments
for reason.
4. Set up OTEL tracing infra according to configuration. A separate
runtime is used for the collector.
5. Add perf traces to the read path.
## Refs
- epic https://github.com/neondatabase/neon/issues/9873
---------
Co-authored-by: Christian Schwarz <christian@neon.tech>
## Problem
Since
0f367cb665
the timeout in `with_client_retries` is implemented via `tokio::timeout`
instead of `reqwest::ClientBuilder::timeout` (because we reuse the
client). It changed the error representation if the timeout is exceeded.
Such errors were suppressed in `allowed_errors.py`, but old regexps do
not match the new error.
Discussion:
https://neondb.slack.com/archives/C033RQ5SPDH/p1743533184736319
## Summary of changes
- Add new `Timeout` error to `allowed_errors.py`
## Problem
`TYPE_CHECKING` is used inconsistently across Python tests.
## Summary of changes
- Update `ruff`: 0.7.0 -> 0.11.2
- Enable TC (flake8-type-checking):
https://docs.astral.sh/ruff/rules/#flake8-type-checking-tc
- (auto)fix all new issues
## Problem
Currently, we only split tenants into 8 shards once, at the 64 GB split
threshold. For very large tenants, we need to keep splitting to avoid
huge shards. And we also want to eagerly split at a lower threshold to
improve throughput during initial ingestion.
See
https://github.com/neondatabase/cloud/issues/22532#issuecomment-2706215907
for details.
Touches https://github.com/neondatabase/cloud/issues/22532.
Requires #11157.
## Summary of changes
This adds parameters and logic to enable repeated splits when a tenant's
largest timeline divided by shard count exceeds `split_threshold`, as
well as eager initial splits at a lower threshold to speed up initial
ingestion. The default parameters are all set such that they retain the
current behavior in production (only split into 8 shards once, at 64
GB).
* `split_threshold` now specifies a maximum shard size. When a shard
exceeds it, all tenant shards are split by powers of 2 such that all
tenant shards fall below `split_threshold`. Disabled by default, like
today.
* Add `max_split_shards` to specify a max shard count for autosplits.
Defaults to 8 to retain current behavior.
* Add `initial_split_threshold` and `initial_split_shards` to specify a
threshold and target count for eager splits of unsharded tenants.
Defaults to 64 GB and 8 shards to retain current production behavior.
Because this PR sets `initial_split_threshold` to 64 GB by default, it
has the effect of enabling autosplits by default. This was not the case
previously, since `split_threshold` defaults to None, but it is already
enabled across production and staging. This is temporary until we
complete the production rollout.
For more details, see code comments.
This must wait until #11157 has been deployed to Pageservers.
Once this has been deployed to production, we plan to change the
parameters to:
* `split-threshold`: 256 GB
* `initial-split-threshold`: 16 GB
* `initial-split-shards`: 4
* `max-split-shards`: 16
The final split points will thus be:
* Start: 1 shard
* 16 GB: 4 shards
* 1 TB: 8 shards
* 2 TB: 16 shards
We will then change the default settings to be disabled by default.
---------
Co-authored-by: John Spray <john@neon.tech>
## Problem
Incoming requests often take the service lock, and sometimes even do
database transactions. That creates a risk that a rogue client can
starve the controller of the ability to do its primary job of
reconciling tenants to an available state.
## Summary of changes
* Use the `governor` crate to rate limit tenant requests at 10 requests
per second. This is ~10-100x lower than the worst "attack" we've seen
from a client bug. Admin APIs are not rate limited.
* Add a `storage_controller_http_request_rate_limited` histogram for
rate limited requests.
* Log a warning every 10 seconds for rate limited tenants.
The rate limiter is parametrized on TenantId, because the kinds of
client bug we're protecting against generally happen within tenant
scope, and the rates should be somewhat stable: we expect the global
rate of requests to increase as we do more work, but we do not expect
the rate of requests to one tenant to increase.
---------
Co-authored-by: John Spray <john@neon.tech>
Before this PR, re-attach and validate would log the same warning
```
calling control plane generation validation API failed
```
on retry errors.
This can be confusing.
This PR makes the message generically valid for any upcall and adds
additional tracing spans to capture context.
Along the way, clean up some copy-pasta variable naming.
refs
-
https://github.com/neondatabase/neon/issues/10381#issuecomment-2684755827
---------
Co-authored-by: Alexander Lakhin <alexander.lakhin@neon.tech>
## Problem
There is no direct backpressure for compaction and L0 read
amplification. This allows a large buildup of compaction debt and read
amplification.
Resolves#5415.
Requires #10402.
## Summary of changes
Delay layer flushes based on the number of level 0 delta layers:
* `l0_flush_delay_threshold`: delay flushes such that they take 2x as
long (default `2 * compaction_threshold`).
* `l0_flush_stall_threshold`: stall flushes until level 0 delta layers
drop below threshold (default `4 * compaction_threshold`).
If either threshold is reached, ephemeral layer rolls also synchronously
wait for layer flushes to propagate this backpressure up into WAL
ingestion. This will bound the number of frozen layers to 1 once
backpressure kicks in, since all other frozen layers must flush before
the rolled layer.
## Analysis
This will significantly change the compute backpressure characteristics.
Recall the three compute backpressure knobs:
* `max_replication_write_lag`: 500 MB (based on Pageserver
`last_received_lsn`).
* `max_replication_flush_lag`: 10 GB (based on Pageserver
`disk_consistent_lsn`).
* `max_replication_apply_lag`: disabled (based on Pageserver
`remote_consistent_lsn`).
Previously, the Pageserver would keep ingesting WAL and build up
ephemeral layers and L0 layers until the compute hit
`max_replication_flush_lag` at 10 GB and began backpressuring. Now, once
we delay/stall WAL ingestion, the compute will begin backpressuring
after `max_replication_write_lag`, i.e. 500 MB. This is probably a good
thing (we're not building up a ton of compaction debt), but we should
consider tuning these settings.
`max_replication_flush_lag` probably doesn't serve a purpose anymore,
and we should consider removing it.
Furthermore, the removal of the upload barrier in #10402 will mean that
we no longer backpressure flushes based on S3 uploads, since
`max_replication_apply_lag` is disabled. We should consider enabling
this as well.
### When and what do we compact?
Default compaction settings:
* `compaction_threshold`: 10 L0 delta layers.
* `compaction_period`: 20 seconds (between each compaction loop check).
* `checkpoint_distance`: 256 MB (size of L0 delta layers).
* `l0_flush_delay_threshold`: 20 L0 delta layers.
* `l0_flush_stall_threshold`: 40 L0 delta layers.
Compaction characteristics:
* Minimum compaction volume: 10 layers * 256 MB = 2.5 GB.
* Additional compaction volume (assuming 128 MB/s WAL): 128 MB/s * 20
seconds = 2.5 GB (10 L0 layers).
* Required compaction bandwidth: 5.0 GB / 20 seconds = 256 MB/s.
### When do we hit `max_replication_write_lag`?
Depending on how fast compaction and flushes happens, the compute will
backpressure somewhere between `l0_flush_delay_threshold` or
`l0_flush_stall_threshold` + `max_replication_write_lag`.
* Minimum compute backpressure lag: 20 layers * 256 MB + 500 MB = 5.6 GB
* Maximum compute backpressure lag: 40 layers * 256 MB + 500 MB = 10.0
GB
This seems like a reasonable range to me.
## Problem
I've noticed that we have 2 flaky tests which failed with error:
```
re.error: missing ), unterminated subpattern at position 21
```
- `test_timeline_archival_chaos` — has been already fixed
- `test_sharded_tad_interleaved_after_partial_success` — I didn't manage
to find the incorrect regex
[Internal link](https://neonprod.grafana.net/goto/yfmVHV7NR?orgId=1)
## Summary of changes
- Wrap `re.match` in `try..except` block and print incorrect regex
Perf benchmarks produce a lot of layers.
## Summary of changes
Bumping the threshold and ignore the warning.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
## Problem
Neon local set-up does not inject an az id in `metadata.json`. See real
change in https://github.com/neondatabase/neon/pull/8852.
## Summary of changes
We piggyback on the existing `availability_zone` pageserver
configuration in order to avoid making neon local even more complex.
## Problem
In order to build AZ aware scheduling, the storage controller needs to
know what AZ pageservers are in.
Related https://github.com/neondatabase/neon/issues/8848
## Summary of changes
This patch set adds a new nullable column to the `nodes` table:
`availability_zone_id`. The node registration
request is extended to include the AZ id (pageservers already have this
in their `metadata.json` file).
If the node is already registered, then we update the persistent and
in-memory state with the provided AZ.
Otherwise, we add the node with the AZ to begin with.
A couple assumptions are made here:
1. Pageserver AZ ids are stable
2. AZ ids do not change over time
Once all pageservers have a configured AZ, we can remove the optionals
in the code and make the database column not nullable.
## Problem
`test_change_pageserver` stops pageservers in a way that can overlap
with the controller's heartbeats: the controller can get a heartbeat
success and then immediately find the node unavailable. This particular
situation triggers a log that isn't in our current allow-list of
messages for nodes offline
Example:
https://neon-github-public-dev.s3.amazonaws.com/reports/pr-8339/10048487700/index.html#testresult/19678f27810231df/retries
## Summary of changes
- Add the message to the allow list
## Problem
For testing, the storage controller has a built-in hack that loads
neon_local endpoint config from disk, and uses it to reconfigure
endpoints when the attached pageserver changes.
Some tests that stop an endpoint while the storage controller is running
could occasionally fail on log errors from the controller trying to use
its special test-mode calls into neon local Endpoint.
Example:
https://neon-github-public-dev.s3.amazonaws.com/reports/pr-8117/9592392425/index.html#/testresult/9d2bb8623d0d53f8
## Summary of changes
- Give NotifyError an explicit NeonLocal variant, to avoid munging these
into generic 500s (I don't want to ignore 500s in general)
- Allow-list errors related to the local notification hook.
The expectation is that tests using endpoints/workloads should be
independently checking that those endpoints work: if neon_local
generates an error inside the storage controller, that's ignorable.
## Problem
This PR refactors some error handling to avoid log spam on
tenant/timeline shutdown.
- "ignoring failure to find gc cutoffs: timeline shutting down." logs
(https://github.com/neondatabase/neon/issues/8012)
- "synthetic_size_worker: failed to calculate synthetic size for tenant
...: Failed to refresh gc_info before gathering inputs: tenant shutting
down", for example here:
https://neon-github-public-dev.s3.amazonaws.com/reports/pr-8049/9502988669/index.html#suites/3fc871d9ee8127d8501d607e03205abb/1a074a66548bbcea
Closes: https://github.com/neondatabase/neon/issues/8012
## Summary of changes
- Refactor: Add a PageReconstructError variant to GcError: this is the
only kind of error that find_gc_cutoffs can emit.
- Functional change: only ignore shutdown PageReconstructError variant:
for other variants, treat it as a real error
- Refactor: add a structured CalculateSyntheticSizeError type and use it
instead of anyhow::Error in synthetic size calculations
- Functional change: while iterating through timelines gathering logical
sizes, only drop out if the whole tenant is cancelled: individual
timeline cancellations indicate deletion in progress and we can just
ignore those.
## Problem
In all cases, AncestorStopping is equivalent to Cancelled.
This became more obvious in
https://github.com/neondatabase/neon/pull/7912#discussion_r1620582309
when updating these error types.
## Summary of changes
- Remove AncestorStopping, always use Cancelled instead
Changes parameters to fix the flakiness of `test_ts_of_lsn_api`. Already
now, the amount of flakiness of the test is pretty low. With this, it's
even lower.
cc #5768
## Problem
https://github.com/neondatabase/neon/pull/7227 destabilized various
tests in the performance suite, with log errors during shutdown. It's
because we switched shutdown order to stop the storage controller before
the pageservers.
## Summary of changes
- Tolerate "connection failed" errors from pageservers trying to
validation their deletion queue.
- Remove code for using AWS secrets manager, as we're deploying with
k8s->env vars instead
- Load each secret independently, so that one can mix CLI args with
environment variables, rather than requiring that all secrets are loaded
with the same mechanism.
- Add a 'strict mode', enabled by default, which will refuse to start if
secrets are not loaded. This avoids the risk of accidentially disabling
auth by omitting the public key, for example
## Problem
As with the pageserver, we should fail tests that emit unexpected log
errors/warnings.
## Summary of changes
- Refactor existing log checks to be reusable
- Run log checks for attachment_service
- Add allow lists as needed.
Switched the order; doing https://github.com/neondatabase/neon/pull/6139
first then can remove uninit marker after.
## Problem
Previously, existence of a timeline directory was treated as evidence of
the timeline's logical existence. That is no longer the case since we
treat remote storage as the source of truth on each startup: we can
therefore do without this mark file.
The mark file had also been used as a pseudo-lock to guard against
concurrent creations of the same TimelineId -- now that persistence is
no longer required, this is a bit unwieldy.
In #6139 the `Tenant::timelines_creating` was added to protect against
concurrent creations on the same TimelineId, making the uninit mark file
entirely redundant.
## Summary of changes
- Code that writes & reads mark file is removed
- Some nearby `pub` definitions are amended to `pub(crate)`
- `test_duplicate_creation` is added to demonstrate that mutual
exclusion of creations still works.
## Problem
One WAL record can actually produce an arbitrary amount of key value pairs.
This is problematic since it might cause our frozen layers to bloat past the
max allowed size of S3 single shot uploads.
[#6639](https://github.com/neondatabase/neon/pull/6639) introduced a "should roll"
check after every batch of `ingest_batch_size` (100 WAL records by default). This helps,
but the original problem still exists.
## Summary of changes
This patch moves the responsibility of rolling the currently open layer
to the `TimelineWriter`. Previously, this was done ad-hoc via calls
to `check_checkpoint_distance`. The advantages of this approach are:
* ability to split one batch over multiple open layers
* less layer map locking
* remove ad-hoc check_checkpoint_distance calls
More specifically, we track the current size of the open layer in the
writer. On each `put` check whether the current layer should be closed
and a new one opened. Keeping track of the currently open layer results
in less contention on the layer map lock. It only needs to be acquired
on the first write and on writes that require a roll afterwards.
Rolling the open layer can be triggered by:
1. The distance from the last LSN we rolled at. This bounds the amount
of WAL that the safekeepers need to store.
2. The size of the currently open layer.
3. The time since the last roll. It helps safekeepers to regard
pageserver as caught up and suspend activity.
Closes#6624
## Problem
Various places in remote storage were not subject to a timeout (thereby
stuck TCP connections could hold things up), and did not respect a
cancellation token (so things like timeline deletion or tenant detach
would have to wait arbitrarily long).
## Summary of changes
- Add download_cancellable and upload_cancellable helpers, and use them
in all the places we wait for remote storage operations (with the
exception of initdb downloads, where it would not have been safe).
- Add a cancellation token arg to `download_retry`.
- Use cancellation token args in various places that were missing one
per #5066Closes: #5066
Why is this only "basic" handling?
- Doesn't express difference between shutdown and errors in return
types, to avoid refactoring all the places that use an anyhow::Error
(these should all eventually return a more structured error type)
- Implements timeouts on top of remote storage, rather than within it:
this means that operations hitting their timeout will lose their
semaphore permit and thereby go to the back of the queue for their
retry.
- Doing a nicer job is tracked in
https://github.com/neondatabase/neon/issues/6096
this will make it easier to test if an added allowed_error does in fact
match for example against a log file from an allure report.
```
$ python3 test_runner/fixtures/pageserver/allowed_errors.py --help
usage: allowed_errors.py [-h] [-i INPUT]
check input against pageserver global allowed_errors
optional arguments:
-h, --help show this help message and exit
-i INPUT, --input INPUT
Pageserver logs file. Reads from stdin if no file is provided.
```
Co-authored-by: Alexander Bayandin <alexander@neon.tech>
