(stacked on #9990 and #9995)
Partially fixes#1287 with a custom option field to enable the fixed
behaviour. This allows us to gradually roll out the fix without silently
changing the observed behaviour for our customers.
related to https://github.com/neondatabase/cloud/issues/15284
## Problem
After enabling LFC in tests and lowering `shared_buffers` we started
having more problems with `test_pg_regress`.
## Summary of changes
Set `shared_buffers` to 1MB to both exercise getPage requests/LFC, and
still have enough room for Postgres to operate. Everything smaller might
be not enough for Postgres under load, and can cause errors like 'no
unpinned buffers available'.
See Konstantin's comment [1] as well.
Fixes#9956
[1]:
https://github.com/neondatabase/neon/issues/9956#issuecomment-2511608097
Improves `wait_until` by:
* Use `timeout` instead of `iterations`. This allows changing the
timeout/interval parameters independently.
* Make `timeout` and `interval` optional (default 20s and 0.5s). Most
callers don't care.
* Only output status every 1s by default, and add optional
`status_interval` parameter.
* Remove `show_intermediate_error`, this was always emitted anyway.
Most callers have been updated to use the defaults, except where they
had good reason otherwise.
# Problem
The timeout-based batching adds latency to unbatchable workloads.
We can choose a short batching timeout (e.g. 10us) but that requires
high-resolution timers, which tokio doesn't have.
I thoroughly explored options to use OS timers (see
[this](https://github.com/neondatabase/neon/pull/9822) abandoned PR).
In short, it's not an attractive option because any timer implementation
adds non-trivial overheads.
# Solution
The insight is that, in the steady state of a batchable workload, the
time we spend in `get_vectored` will be hundreds of microseconds anyway.
If we prepare the next batch concurrently to `get_vectored`, we will
have a sizeable batch ready once `get_vectored` of the current batch is
done and do not need an explicit timeout.
This can be reasonably described as **pipelining of the protocol
handler**.
# Implementation
We model the sub-protocol handler for pagestream requests
(`handle_pagrequests`) as two futures that form a pipeline:
2. Batching: read requests from the connection and fill the current
batch
3. Execution: `take` the current batch, execute it using `get_vectored`,
and send the response.
The Reading and Batching stage are connected through a new type of
channel called `spsc_fold`.
See the long comment in the `handle_pagerequests_pipelined` for details.
# Changes
- Refactor `handle_pagerequests`
- separate functions for
- reading one protocol message; produces a `BatchedFeMessage` with just
one page request in it
- batching; tried to merge an incoming `BatchedFeMessage` into an
existing `BatchedFeMessage`; returns `None` on success and returns back
the incoming message in case merging isn't possible
- execution of a batched message
- unify the timeline handle acquisition & request span construction; it
now happen in the function that reads the protocol message
- Implement serial and pipelined model
- serial: what we had before any of the batching changes
- read one protocol message
- execute protocol messages
- pipelined: the design described above
- optionality for execution of the pipeline: either via concurrent
futures vs tokio tasks
- Pageserver config
- remove batching timeout field
- add ability to configure pipelining mode
- add ability to limit max batch size for pipelined configurations
(required for the rollout, cf
https://github.com/neondatabase/cloud/issues/20620 )
- ability to configure execution mode
- Tests
- remove `batch_timeout` parametrization
- rename `test_getpage_merge_smoke` to `test_throughput`
- add parametrization to test different max batch sizes and execution
moes
- rename `test_timer_precision` to `test_latency`
- rename the test case file to `test_page_service_batching.py`
- better descriptions of what the tests actually do
## On the holding The `TimelineHandle` in the pending batch
While batching, we hold the `TimelineHandle` in the pending batch.
Therefore, the timeline will not finish shutting down while we're
batching.
This is not a problem in practice because the concurrently ongoing
`get_vectored` call will fail quickly with an error indicating that the
timeline is shutting down.
This results in the Execution stage returning a `QueryError::Shutdown`,
which causes the pipeline / entire page service connection to shut down.
This drops all references to the
`Arc<Mutex<Option<Box<BatchedFeMessage>>>>` object, thereby dropping the
contained `TimelineHandle`s.
- => fixes https://github.com/neondatabase/neon/issues/9850
# Performance
Local run of the benchmarks, results in [this empty
commit](1cf5b1463f)
in the PR branch.
Key take-aways:
* `concurrent-futures` and `tasks` deliver identical `batching_factor`
* tail latency impact unknown, cf
https://github.com/neondatabase/neon/issues/9837
* `concurrent-futures` has higher throughput than `tasks` in all
workloads (=lower `time` metric)
* In unbatchable workloads, `concurrent-futures` has 5% higher
`CPU-per-throughput` than that of `tasks`, and 15% higher than that of
`serial`.
* In batchable-32 workload, `concurrent-futures` has 8% lower
`CPU-per-throughput` than that of `tasks` (comparison to tput of
`serial` is irrelevant)
* in unbatchable workloads, mean and tail latencies of
`concurrent-futures` is practically identical to `serial`, whereas
`tasks` adds 20-30us of overhead
Overall, `concurrent-futures` seems like a slightly more attractive
choice.
# Rollout
This change is disabled-by-default.
Rollout plan:
- https://github.com/neondatabase/cloud/issues/20620
# Refs
- epic: https://github.com/neondatabase/neon/issues/9376
- this sub-task: https://github.com/neondatabase/neon/issues/9377
- the abandoned attempt to improve batching timeout resolution:
https://github.com/neondatabase/neon/pull/9820
- closes https://github.com/neondatabase/neon/issues/9850
- fixes https://github.com/neondatabase/neon/issues/9835
Adds a benchmark for logical message WAL ingestion throughput
end-to-end. Logical messages are essentially noops, and thus ignored by
the Pageserver.
Example results from my MacBook, with fsync enabled:
```
postgres_ingest: 14.445 s
safekeeper_ingest: 29.948 s
pageserver_ingest: 30.013 s
pageserver_recover_ingest: 8.633 s
wal_written: 10,340 MB
message_count: 1310720 messages
postgres_throughput: 715 MB/s
safekeeper_throughput: 345 MB/s
pageserver_throughput: 344 MB/s
pageserver_recover_throughput: 1197 MB/s
```
See
https://github.com/neondatabase/neon/issues/9642#issuecomment-2475995205
for running analysis.
Touches #9642.
## Problem
We used `set_path()` to replace the database name in the connection
string. It automatically does url-safe encoding if the path is not
already encoded, but it does it as per the URL standard, which assumes
that tabs can be safely removed from the path without changing the
meaning of the URL. See, e.g.,
https://url.spec.whatwg.org/#concept-basic-url-parser. It also breaks
for DBs with properly %-encoded names, like with `%20`, as they are kept
intact, but actually should be escaped.
Yet, this is not true for Postgres, where it's completely valid to have
trailing tabs in the database name.
I think this is the PR that caused this regression
https://github.com/neondatabase/neon/pull/9717, as it switched from
`postgres::config::Config` back to `set_path()`.
This was fixed a while ago already [1], btw, I just haven't added a test
to catch this regression back then :(
## Summary of changes
This commit changes the code back to use
`postgres/tokio_postgres::Config` everywhere.
While on it, also do some changes around, as I had to touch this code:
1. Bump some logging from `debug` to `info` in the spec apply path. We
do not use `debug` in prod, and it was tricky to understand what was
going on with this bug in prod.
2. Refactor configuration concurrency calculation code so it was
reusable. Yet, still keep `1` in the case of reconfiguration. The
database can be actively used at this moment, so we cannot guarantee
that there will be enough spare connection slots, and the underlying
code won't handle connection errors properly.
3. Simplify the installed extensions code. It was spawning a blocking
task inside async function, which doesn't make much sense. Instead, just
have a main sync function and call it with `spawn_blocking` in the API
code -- the only place we need it to be async.
4. Add regression python test to cover this and related problems in the
future. Also, add more extensive testing of schema dump and DBs and
roles listing API.
[1]:
4d1e48f3b9
[2]:
https://www.postgresql.org/message-id/flat/20151023003445.931.91267%40wrigleys.postgresql.orgResolvesneondatabase/cloud#20869
## Problem
https://github.com/neondatabase/neon/pull/9746 lifted decoding and
interpretation of WAL to the safekeeper.
This reduced the ingested amount on the pageservers by around 10x for a
tenant with 8 shards, but doubled
the ingested amount for single sharded tenants.
Also, https://github.com/neondatabase/neon/pull/9746 uses bincode which
doesn't support schema evolution.
Technically the schema can be evolved, but it's very cumbersome.
## Summary of changes
This patch set addresses both problems by adding protobuf support for
the interpreted wal records and adding compression support. Compressed
protobuf reduced the ingested amount by 100x on the 32 shards
`test_sharded_ingest` case (compared to non-interpreted proto). For the
1 shard case the reduction is 5x.
Sister change to `rust-postgres` is
[here](https://github.com/neondatabase/rust-postgres/pull/33).
## Links
Related: https://github.com/neondatabase/neon/issues/9336
Epic: https://github.com/neondatabase/neon/issues/9329
## Problem
LFC is not enabled by default in tests, but it is enabled in production.
This increases the risk of errors in the production environment, which
were not found during the routine workflow.
However, enabling LFC for all the tests may overload the disk on our
servers and increase the number of failures.
So, we try enabling LFC in one case to evaluate the possible risk.
## Summary of changes
A new environment variable, USE_LFC is introduced. If it is set to true,
LFC is enabled by default in all the tests.
In our workflow, we enable LFC for PG17, release, x86-64, and disabled
for all other combinations.
---------
Co-authored-by: Alexey Masterov <alexeymasterov@neon.tech>
Co-authored-by: a-masterov <72613290+a-masterov@users.noreply.github.com>
Co-authored-by: Heikki Linnakangas <heikki@neon.tech>
Co-authored-by: Stas Kelvic <stas@neon.tech>
# Context
This PR contains PoC-level changes for a product feature that allows
onboarding large databases into Neon without going through the regular
data path.
# Changes
This internal RFC provides all the context
* https://github.com/neondatabase/cloud/pull/19799
In the language of the RFC, this PR covers
* the Importer code (`fast_import`)
* all the Pageserver changes (mgmt API changes, flow implementation,
etc)
* a basic test for the Pageserver changes
# Reviewing
As acknowledged in the RFC, the code added in this PR is not ready for
general availability.
Also, the **architecture is not to be discussed in this PR**, but in the
RFC and associated Slack channel instead.
Reviewers of this PR should take that into consideration.
The quality bar to apply during review depends on what area of the code
is being reviewed:
* Importer code (`fast_import`): practically anything goes
* Core flow (`flow.rs`):
* Malicious input data must be expected and the existing threat models
apply.
* The code must not be safe to execute on *dedicated* Pageserver
instances:
* This means in particular that tenants *on other* Pageserver instances
must not be affected negatively wrt data confidentiality, integrity or
availability.
* Other code: the usual quality bar
* Pay special attention to correct use of gate guards, timeline
cancellation in all places during shutdown & migration, etc.
* Consider the broader system impact; if you find potentially
problematic interactions with Storage features that were not covered in
the RFC, bring that up during the review.
I recommend submitting three separate reviews, for the three high-level
areas with different quality bars.
# References
(Internal-only)
* refs https://github.com/neondatabase/cloud/issues/17507
* refs https://github.com/neondatabase/company_projects/issues/293
* refs https://github.com/neondatabase/company_projects/issues/309
* refs https://github.com/neondatabase/cloud/issues/20646
---------
Co-authored-by: Stas Kelvich <stas.kelvich@gmail.com>
Co-authored-by: Heikki Linnakangas <heikki@neon.tech>
Co-authored-by: John Spray <john@neon.tech>
## Problem
Follow up of https://github.com/neondatabase/neon/pull/9682, that patch
didn't fully address the problem: what if shutdown fails due to whatever
reason and then we reattach the tenant? Then we will still remove the
future layer. The underlying problem is that the fix for #5878 gets
voided because of the generation optimizations.
Of course, we also need to ensure that delete happens after uploads, but
note that we only schedule deletes when there are no ongoing upload
tasks, so that's fine.
## Summary of changes
* Add a test case to reproduce the behavior (by changing the original
test case to attach the same generation).
* If layer upload happens after the deletion, drain the deletion queue
before uploading.
* If blocked_deletion is enabled, directly remove it from the
blocked_deletion queue.
* Local fs backend fix to avoid race between deletion and preload.
* test_emergency_mode does not need to wait for uploads (and it's
generally not possible to wait for uploads).
* ~~Optimize deletion executor to skip validation if there are no files
to delete.~~ this doesn't work
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
## Problem
We use a pretty old version of `mypy` 1.3 (released 1.5 years ago), it
produces false positives for `typing.Self`.
## Summary of changes
- Bump `mypy` from 1.3 to 1.13
- Fix new warnings and errors
- Use `typing.Self` whenever we `return self`
## Problem
On Debian 12 (Bookworm), Python 3.11 is the latest available version.
## Summary of changes
- Update Python to 3.11 in build-tools
- Fix ruff check / format
- Fix mypy
- Use `StrEnum` instead of pair `str`, `Enum`
- Update docs
## Problem
Followup to https://github.com/neondatabase/neon/pull/9677 which enables
`no_sync` in tests. This can be merged once the next release has
happened.
## Summary of changes
- Always run pageserver with `no_sync = true` in tests.
Fix direct reading from WAL buffers.
Pointer wasn't advanced which resulted in sending corrupted WAL if part
of read used WAL buffers and part read from the file. Also move it to
neon_walreader so that e.g. replication could also make use of it.
ref https://github.com/neondatabase/cloud/issues/19567
## Problem
`tenant_get_shards()` does not work with a sharded tenant on 1
pageserver, as it assumes an unsharded tenant in this case. This special
case appears to have been added to handle e.g. `test_emergency_mode`,
where the storage controller is stopped. This breaks e.g. the sharded
ingest benchmark in #9591 when run with a single shard.
## Summary of changes
Correctly look up shards even with a single pageserver, but add a
special case that assumes an unsharded tenant if the storage controller
is stopped and the caller provides an explicit pageserver, in order to
accomodate `test_emergency_mode`.
python based regression test setup for auth_broker. This uses a http
mock for cplane as well as the JWKs url.
complications:
1. We cannot just use local_proxy binary, as that requires the
pg_session_jwt extension which we don't have available in the current
test suite
2. We cannot use just any old http mock for local_proxy, as auth_broker
requires http2 to local_proxy
as such, I used the h2 library to implement an echo server - copied from
the examples in the h2 docs.
## Problem
Part of https://github.com/neondatabase/neon/issues/8623
## Summary of changes
Removed all aux-v1 config processing code. Note that we persisted it
into the index part file, so we cannot really remove the field from
index part. I also kept the config item within the tenant config, but we
will not read it any more.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
This PR adds a pageserver mgmt API to scan a layer file for disposable
keys.
It hooks it up to the sharding compaction test, demonstrating that we're
not filtering out all disposable keys.
This is extracted from PGDATA import
(https://github.com/neondatabase/neon/pull/9218)
where I do the filtering of layer files based on `is_key_disposable`.
Before, we didn't copy over the `index-part.json` of offloaded timelines
to the new shard's location, resulting in the new shard not knowing the
timeline even exists.
In #9444, we copy over the manifest, but we also need to do this for
`index-part.json`.
As the operations to do are mostly the same between offloaded and
non-offloaded timelines, we can iterate over all of them in the same
loop, after the introduction of a `TimelineOrOffloadedArcRef` type to
generalize over the two cases. This is analogous to the deletion code
added in #8907.
The added test also ensures that the sharded archival config endpoint
works, something that has not yet been ensured by tests.
Part of #8088
## Problem
We were seeing timeouts on migrations in this test.
The test unfortunately tends to saturate local storage, which is shared
between the pageservers and the control plane database, which makes the
test kind of unrealistic. We will also want to increase the scale of
this test, so it's worth fixing that.
## Summary of changes
- Instead of randomly creating timelines at the same time as the other
background operations, explicitly identify a subset of tenant which will
have timelines, and create them at the start. This avoids pageservers
putting a lot of load on the test node during the main body of the test.
- Adjust the tenants created to create some number of 8 shard tenants
and the rest 1 shard tenants, instead of just creating a lot of 2 shard
tenants.
- Use archival_config to exercise tenant-mutating operations, instead of
using timeline creation for this.
- Adjust reconcile_until_idle calls to avoid waiting 5 seconds between
calls, which causes timelines with large shard count tenants.
- Fix a pageserver bug where calls to archival_config during activation
get 404
## Problem
At MacOS `pg_dynshmem` file is create in PGDATADIR which cause mismatch
in directories comparison
## Summary of changes
Add this files to the ignore list.
## Checklist before requesting a review
- [ ] I have performed a self-review of my code.
- [ ] If it is a core feature, I have added thorough tests.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [ ] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
## Checklist before merging
- [ ] Do not forget to reformat commit message to not include the above
checklist
Co-authored-by: Konstantin Knizhnik <knizhnik@neon.tech>
## Problem
We faced the problem of incompatibility of the different components of
different versions.
This should be detected automatically to prevent production bugs.
## Summary of changes
The test for this situation was implemented
Co-authored-by: Alexander Bayandin <alexander@neon.tech>
## Problem
We need a way to incrementally switch to direct IO. During the rollout
we might want to switch to O_DIRECT on image and delta layer read path
first before others.
## Summary of changes
- Revisited and simplified direct io config in `PageserverConf`.
- We could add a fallback mode for open, but for read there isn't a
reasonable alternative (without creating another buffered virtual file).
- Added a wrapper around `VirtualFile`, current implementation become
`VirtualFileInner`
- Use `open_v2`, `create_v2`, `open_with_options_v2` when we want to use
the IO mode specified in PS config.
- Once we onboard all IO through VirtualFile using this new API, we will
delete the old code path.
- Make io mode live configurable for benchmarking.
- Only guaranteed for files opened after the config change, so do it
before the experiment.
As an example, we are using `open_v2` with
`virtual_file::IoMode::Direct` in
https://github.com/neondatabase/neon/pull/9169
We also remove `io_buffer_alignment` config in
a04cfd754b and use it as a compile time
constant. This way we don't have to carry the alignment around or make
frequent call to retrieve this information from the static variable.
Signed-off-by: Yuchen Liang <yuchen@neon.tech>
The "Starting postgres endpoint <name>" message is not needed, because
the neon_cli.py prints the neon_local command line used to start the
endpoint. That contains the same information. The "Postgres startup took
XX seconds" message is not very useful because no one pays attention to
those in the python test logs when things are going smoothly, and if you
do wonder about the startup speed, the same information and more can be
found in the compute log.
Before:
2024-10-07 22:32:27.794 INFO [neon_fixtures.py:3492] Starting postgres endpoint ep-1
2024-10-07 22:32:27.794 INFO [neon_cli.py:73] Running command "/tmp/neon/bin/neon_local endpoint start --safekeepers 1 ep-1"
2024-10-07 22:32:27.901 INFO [neon_fixtures.py:3690] Postgres startup took 0.11398935317993164 seconds
After:
2024-10-07 22:32:27.794 INFO [neon_cli.py:73] Running command "/tmp/neon/bin/neon_local endpoint start --safekeepers 1 ep-1"
It didn't serve much value, and was only used twice.
Path(__file__).parent is a pretty easy invocation to use.
Signed-off-by: Tristan Partin <tristan@neon.tech>
In the passing, rename it to NeonLocalCli, to reflect that the binary
is called 'neon_local'.
Add wrapper for the 'timeline_import' command, eliminating the last
raw call to the raw_cli() function from tests, except for a few in
test_neon_cli.py which are about testing the 'neon_local' iteself. All
the other calls are now made through the strongly-typed wrapper
functions
Add wrappers for a few commands that didn't have them before. Move the
logic to generate tenant and timeline IDs from NeonCli to the callers,
so that NeonCli is more purely just a type-safe wrapper around
'neon_local'.
When endpoint is stopped in immediate mode and started again there is a
chance of old connection delivering some WAL to safekeepers after second
start checked need for sync-safekeepers and thus grabbed basebackup LSN.
It makes basebackup unusable, so compute panics. Avoid flakiness by
waiting for walreceivers on safekeepers to be gone in such cases. A
better way would be to bump term on safekeepers if sync-safekeepers is
skipped, but it needs more infrastructure.
ref https://github.com/neondatabase/neon/issues/9079
Verbosity in this case is good when reading the code. Short options are
better when operating in an interactive shell.
Signed-off-by: Tristan Partin <tristan@neon.tech>
As @koivunej mentioned in the storage channel, for regress test, we
don't need to create a log file for the scrubber, and we should reduce
noisy logs.
## Summary of changes
* Disable log file creation for storage scrubber
* Only log at info level
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
Even with the 100 ms interval, on my laptop the pageserver always
becomes available on second attempt, so this saves about 900 ms at
every test startup.
misc changes split out from #8855
- **allow cloning the request context in a read-only fashion for
background tasks**
- **propagate endpoint and request context through the jwk cache**
- **only allow password based auth for md5 during testing**
- **remove auth info from conn info**
There's currently no way to just start/stop broker from `neon_local`.
This PR
* adds a sub-command
* uses that sub-command from the test suite instead of the pre-existing
Python `subprocess` based approach.
Found this useful during investigation
https://github.com/neondatabase/cloud/issues/16886.
We added another migration in 5876c441ab,
but didn't bump this value. This had no effect, but best to fix it
anyway.
Signed-off-by: Tristan Partin <tristan@neon.tech>
