## Problem
The vectored read path proposed in
https://github.com/neondatabase/neon/pull/6576 seems
to be functionally correct, but in my testing (see below) it is about 10-20% slower than the naive
sequential vectored implementation.
## Summary of changes
There's three parts to this PR:
1. Supporting vectored blob reads. This is actually trickier than it
sounds because on disk blobs are prefixed with a variable length size header.
Since the blobs are not necessarily fixed size, we need to juggle the offsets
such that the callers can retrieve the blobs from the resulting buffer.
2. Merge disk read requests issued by the vectored read path up to a
maximum size. Again, the merging is complicated by the fact that blobs
are not fixed size. We keep track of the begin and end offset of each blob
and pass them into the vectored blob reader. In turn, the reader will return
a buffer and the offsets at which the blobs begin and end.
3. A benchmark for basebackup requests against tenant with large SLRU
block counts is added. This required a small change to pagebench and a new config
variable for the pageserver which toggles the vectored get validation.
We can probably optimise things further by adding a little bit of
concurrency for our IO. In principle, it's as simple as spawning a task which deals with issuing
IO and doing the serialisation and handling on the parent task which receives input via a
channel.
This PR adds an API to live-reconfigure the VirtualFile io engine.
It also adds a flag to `pagebench get-page-latest-lsn`, which is where I
found this functionality to be useful: it helps compare the io engines
in a benchmark without re-compiling a release build, which took ~50s on
the i3en.3xlarge where I was doing the benchmark.
Switching the IO engine is completely safe at runtime.
Fixes#4689 by replacing all of `std::Path` , `std::PathBuf` with
`camino::Utf8Path`, `camino::Utf8PathBuf` in
- pageserver
- safekeeper
- control_plane
- libs/remote_storage
Co-authored-by: Joonas Koivunen <joonas@neon.tech>
This PR adds a `task_kind` label to page cache access metrics.
These are to validate our hypothesis that the high hit page cache rate
we observe in prod is due to internal tasks, not getpage requests from
compute.
We believe the latter should near-always be a pageserver-page-cache
_miss_ because compute has it's own page cache, and hence there is no
locality of reference for its accesses to pageserver page cache.
Before this PR, we didn't have `RequestContext` propagation to any code
below the on-demand downloader.
The vast majority of changes in this PR is concerned with adding that
propagation.
## Problem
Once we use async file system APIs for `VirtualFile`, these functions
will also need to be async fn.
## Summary of changes
Makes the functions `open, open_with_options, create,sync_all,with_file`
of `VirtualFile` async fn, including all functions that call it. Like in
the prior PRs, the actual I/O operations are not using async APIs yet,
as per request in the #4743 epic.
We switch towards not using `VirtualFile` in the par_fsync module,
hopefully this is only temporary until we can actually do fully async
I/O in `VirtualFile`. This might cause us to exhaust fd limits in the
tests, but it should only be an issue for the local developer as we have
high ulimits in prod.
This PR is a follow-up of #5189, #5190, #5195, and #5203. Part of #4743.
## Problem
- Scrubber's `tidy` command requires presence of a control plane
- Scrubber has no tests at all
## Summary of changes
- Add re-usable async streams for reading metadata from a bucket
- Add a `scan-metadata` command that reads from those streams and calls
existing `checks.rs` code to validate metadata, then returns a summary
struct for the bucket. Command returns nonzero status if errors are
found.
- Add an `enable_scrub_on_exit()` function to NeonEnvBuilder so that
tests using remote storage can request to have the scrubber run after
they finish
- Enable remote storarge and scrub_on_exit in test_pageserver_restart
and test_pageserver_chaos
This is a "toe in the water" of the overall space of validating the
scrubber. Later, we should:
- Enable scrubbing at end of tests using remote storage by default
- Make the success condition stricter than "no errors": tests should
declare what tenants+timelines they expect to see in the bucket (or
sniff these from the functions tests use to create them) and we should
require that the scrubber reports on these particular tenants/timelines.
The `tidy` command is untouched in this PR, but it should be refactored
later to use similar async streaming interface instead of the current
batch-reading approach (the streams are faster with large buckets), and
to also be covered by some tests.
---------
Co-authored-by: Joonas Koivunen <joonas@neon.tech>
Co-authored-by: Alexander Bayandin <alexander@neon.tech>
Co-authored-by: Christian Schwarz <christian@neon.tech>
Co-authored-by: Conrad Ludgate <conrad@neon.tech>
## Problem
`read_blk` does I/O and thus we would like to make it async. We can't
make the function async as long as the `PageReadGuard` returned by
`read_blk` isn't `Send`. The page cache is called by `read_blk`, and
thus it can't be async without `read_blk` being async. Thus, we have a
circular dependency.
## Summary of changes
Due to the circular dependency, we convert both the page cache and
`read_blk` to async at the same time:
We make the page cache use `tokio::sync` synchronization primitives as
those are `Send`. This makes all the places that acquire a lock require
async though, which we then also do. This includes also asyncification
of the `read_blk` function.
Builds upon #4994, #5015, #5056, and #5129.
Part of #4743.
## Problem
We want to make `read_blk` an async function, but outside of
`async_trait`, which allocates, and nightly features, we can't use async
fn's in traits.
## Summary of changes
* Remove all uses of `BlockReader::read_blk` in favour of using block
cursors, at least where the type of the `BlockReader` is behind a
generic
* Introduce a `BlockReaderRef` enum that lists all implementors of
`BlockReader::read_blk`.
* Remove `BlockReader::read_blk` and move its implementations into
inherent functions on the types instead.
We don't turn `read_blk` into an async fn yet, for that we also need to
modify the page cache. So this is a preparatory PR, albeit an important
one.
Part of #4743.
## Problem
`DiskBtreeReader::get` and `DiskBtreeReader::visit` both call `read_blk`
internally, which we would like to make async in the future. This PR
focuses on making the interface of these two functions `async`. There is
further work to be done in forms of making `visit` to not be recursive
any more, similar to #4838. For that, see
https://github.com/neondatabase/neon/pull/4884.
Builds on top of https://github.com/neondatabase/neon/pull/4839, part of
https://github.com/neondatabase/neon/issues/4743
## Summary of changes
Make `DiskBtreeReader::get` and `DiskBtreeReader::visit` async functions
and `await` in the places that call these functions.
In #4743, we'd like to convert the read path to use `async` rust. In
preparation of that, this PR switches some functions that are calling
lower level functions like `BlockReader::read_blk`,
`BlockCursor::read_blob`, etc into `async`. The PR does not switch all
functions however, and only focuses on the ones which are easy to
switch.
This leaves around some async functions that are (currently)
unnecessarily `async`, but on the other hand it makes future changes
smaller in diff.
Part of #4743 (but does not completely address it).
This PR refactors the original page_binutils with a single tool pagectl,
use clap derive for better command line parsing, and adds the dump kv
tool to extract information from delta file. This helps me better
understand what's inside the page server. We can add support for other
types of file and more functionalities in the future.
---------
Signed-off-by: Alex Chi <iskyzh@gmail.com>
