## Problem
The pageserver had two ways of loading a tenant:
- `spawn_load` would trust on-disk content to reflect all existing
timelines
- `spawn_attach` would list timelines in remote storage.
It was incorrect for `spawn_load` to trust local disk content, because
it doesn't know if the tenant might have been attached and written
somewhere else. To make this correct would requires some generation
number checks, but the payoff is to avoid one S3 op per tenant at
startup, so it's not worth the complexity -- it is much simpler to have
one way to load a tenant.
## Summary of changes
- `Tenant` objects are always created with `Tenant::spawn`: there is no
more distinction between "load" and "attach".
- The ability to run without remote storage (for `neon_local`) is
preserved by adding a branch inside `attach` that uses a fallback
`load_local` if no remote_storage is present.
- Fix attaching a tenant when it has a timeline with no IndexPart: this
can occur if a newly created timeline manages to upload a layer before
it has uploaded an index.
- The attach marker file that used to indicate whether a tenant should
be "loaded" or "attached" is no longer needed, and is removed.
- The GenericRemoteStorage interface gets a `list()` method that maps
more directly to what ListObjects does, returning both keys and common
prefixes. The existing `list_files` and `list_prefixes` methods are just
calls into `list()` now -- these can be removed later if we would like
to shrink the interface a bit.
- The remote deletion marker is moved into `timelines/` and detected as
part of listing timelines rather than as a separate GET request. If any
existing tenants have a marker in the old location (unlikely, only
happens if something crashes mid-delete), then they will rely on the
control plane retrying to complete their deletion.
- Revise S3 calls for timeline listing and tenant load to take a
cancellation token, and retry forever: it never makes sense to make a
Tenant broken because of a transient S3 issue.
## Breaking changes
- The remote deletion marker is moved from `deleted` to
`timelines/deleted` within the tenant prefix. Markers in the old
location will be ignored: it is the control plane's responsibility to
retry deletions until they succeed. Markers in the new location will be
tolerated by the previous release of pageserver via
https://github.com/neondatabase/neon/pull/5632
- The local `attaching` marker file is no longer written. Therefore, if
the pageserver is downgraded after running this code, the old pageserver
will not be able to distinguish between partially attached tenants and
fully attached tenants. This would only impact tenants that were partway
through attaching at the moment of downgrade. In the unlikely even t
that we do experience an incident that prompts us to roll back, then we
may check for attach operations in flight, and manually insert
`attaching` marker files as needed.
---------
Co-authored-by: Christian Schwarz <christian@neon.tech>
## Problem
The 500 status code should only be used for bugs or unrecoverable
failures: situations we did not expect. Currently, the pageserver is
misusing this response code for some situations that are totally normal,
like requests targeting tenants that are in the process of activating.
The 503 response is a convenient catch-all for "I can't right now, but I
will be able to".
## Summary of changes
- Change some transient availability error conditions to return 503
instead of 500
- Update the HTTP client configuration in integration tests to retry on
503
After these changes, things like creating a tenant and then trying to
create a timeline within it will no longer require carefully checking
its status first, or retrying on 500s. Instead, a client which is
properly configured to retry on 503 can quietly handle such situations.
Part of #5172. Builds upon #5243, #5298. Includes the test changes:
- no more RemoteStorageKind.NOOP
- no more testing of pageserver without remote storage
- benchmarks now use LOCAL_FS as well
Support for running without RemoteStorage is still kept but in practice,
there are no tests and should not be any tests.
Co-authored-by: Christian Schwarz <christian@neon.tech>
## Problem
Pageservers must not delete objects or advertise updates to
remote_consistent_lsn without checking that they hold the latest
generation for the tenant in question (see [the RFC](
https://github.com/neondatabase/neon/blob/main/docs/rfcs/025-generation-numbers.md))
In this PR:
- A new "deletion queue" subsystem is introduced, through which
deletions flow
- `RemoteTimelineClient` is modified to send deletions through the
deletion queue:
- For GC & compaction, deletions flow through the full generation
verifying process
- For timeline deletions, deletions take a fast path that bypasses
generation verification
- The `last_uploaded_consistent_lsn` value in `UploadQueue` is replaced
with a mechanism that maintains a "projected" lsn (equivalent to the
previous property), and a "visible" LSN (which is the one that we may
share with safekeepers).
- Until `control_plane_api` is set, all deletions skip generation
validation
- Tests are introduced for the new functionality in
`test_pageserver_generations.py`
Once this lands, if a pageserver is configured with the
`control_plane_api` configuration added in
https://github.com/neondatabase/neon/pull/5163, it becomes safe to
attach a tenant to multiple pageservers concurrently.
---------
Co-authored-by: Joonas Koivunen <joonas@neon.tech>
Co-authored-by: Christian Schwarz <christian@neon.tech>
## Problem
In many places in test code, paths are built manually from what
NeonEnv.tenant_dir and NeonEnv.timeline_dir could do.
## Summary of changes
1. NeonEnv.tenant_dir and NeonEnv.timeline_dir moved under class
NeonPageserver as the path they use is per-pageserver instance.
2. Used these everywhere to replace manual path building
Closes#5258
---------
Signed-off-by: Rahul Modpur <rmodpur2@gmail.com>
Assorted flakyness fixes from #5198, might not be flaky on `main`.
Migrate some tests using neon_simple_env to just neon_env_builder and
using initial_tenant to make flakyness understanding easier. (Did not
understand the flakyness of
`test_timeline_create_break_after_uninit_mark`.)
`test_download_remote_layers_api` is flaky because we have no atomic
"wait for WAL, checkpoint, wait for upload and do not receive any more
WAL".
`test_tenant_size` fixes are just boilerplate which should had always
existed; we should wait for the tenant to be active. similarly for
`test_timeline_delete`.
`test_timeline_size_post_checkpoint` fails often for me with reading
zero from metrics. Give it a few attempts.
## Problem
Currently our testing environment only supports running a single
pageserver at a time. This is insufficient for testing failover and
migrations.
- Dependency of writing tests for #5207
## Summary of changes
- `neon_local` and `neon_fixture` now handle multiple pageservers
- This is a breaking change to the `.neon/config` format: any local
environments will need recreating
- Existing tests continue to work unchanged:
- The default number of pageservers is 1
- `NeonEnv.pageserver` is now a helper property that retrieves the first
pageserver if there is only one, else throws.
- Pageserver data directories are now at `.neon/pageserver_{n}` where n
is 1,2,3...
- Compatibility tests get some special casing to migrate neon_local
configs: these are not meant to be backward/forward compatible, but they
were treated that way by the test.
Remote storage cleanup split from #5198:
- pageserver, extensions, and safekeepers now have their separate remote
storage
- RemoteStorageKind has the configuration code
- S3Storage has the cleanup code
- with MOCK_S3, pageserver, extensions, safekeepers use different
buckets
- with LOCAL_FS, `repo_dir / "local_fs_remote_storage" / $user` is used
as path, where $user is `pageserver`, `safekeeper`
- no more `NeonEnvBuilder.enable_xxx_remote_storage` but one
`enable_{pageserver,extensions,safekeeper}_remote_storage`
Should not have any real changes. These will allow us to default to
`LOCAL_FS` for pageserver on the next PR, remove
`RemoteStorageKind.NOOP`, work towards #5172.
Co-authored-by: Alexander Bayandin <alexander@neon.tech>
## Problem
Tests using remote storage have manually entered `test_name` parameters,
which:
- Are easy to accidentally duplicate when copying code to make a new
test
- Omit parameters, so don't actually create unique S3 buckets when
running many tests concurrently.
## Summary of changes
- Use the `request` fixture in neon_env_builder fixture to get the test
name, then munge that into an S3 compatible bucket name.
- Remove the explicit `test_name` parameters to enable_remote_storage
For
[#5086](https://github.com/neondatabase/neon/pull/5086#issuecomment-1701331777)
we will require remote storage to be configured in pageserver.
This PR enables `localfs`-based storage for all Rust unit tests.
Changes:
- In `TenantHarness`, set up localfs remote storage for the tenant.
- `create_test_timeline` should mimic what real timeline creation does,
and real timeline creation waits for the timeline to reach remote
storage. With this PR, `create_test_timeline` now does that as well.
- All the places that create the harness tenant twice need to shut down
the tenant before the re-create through a second call to `try_load` or
`load`.
- Without shutting down, upload tasks initiated by/through the first
incarnation of the harness tenant might still be ongoing when the second
incarnation of the harness tenant is `try_load`/`load`ed. That doesn't
make sense in the tests that do that, they generally try to set up a
scenario similar to pageserver stop & start.
- There was one test that recreates a timeline, not the tenant. For that
case, I needed to create a `Timeline::shutdown` method. It's a
refactoring of the existing `Tenant::shutdown` method.
- The remote_timeline_client tests previously set up their own
`GenericRemoteStorage` and `RemoteTimelineClient`. Now they re-use the
one that's pre-created by the TenantHarness. Some adjustments to the
assertions were needed because the assertions now need to account for
the initial image layer that's created by `create_test_timeline` to be
present.
I made a mistake when I adding `env.initial_timeline:
Optional[TimelineId]` in the #3839, should had just generated it and
used it to create a specific timeline. This PR fixes those mistakes, and
some extra calling into psql which must be slower than python field
access.
Rather temporary solution before proper:
https://github.com/neondatabase/neon/issues/5006
It requires more plumbing so lets not attach deleted tenants first and
then implement resume.
Additionally fix `assert_prefix_empty`. It had a buggy prefix calculation,
and since we always asserted for absence of stuff it worked. Here I
started to assert for presence of stuff too and it failed. Added more
"presence" asserts to other places to be confident that it works.
Resolves [#5016](https://github.com/neondatabase/neon/issues/5016)
Previously list_prefixes was incorrectly used for that purpose. Change
to use list_files. Add a test.
Some drive by refactorings on python side to move helpers out of
specific test file to be widely accessible
resolves https://github.com/neondatabase/neon/issues/4499
We don't know how our s3 remote_storage is performing, or if it's
blocking the shutdown. Well, for sampling reasons, we will not really
know even after this PR.
Add metrics:
- align remote_storage metrics towards #4813 goals
- histogram
`remote_storage_s3_request_seconds{request_type=(get_object|put_object|delete_object|list_objects),
result=(ok|err|cancelled)}`
- histogram `remote_storage_s3_wait_seconds{request_type=(same kinds)}`
- counter `remote_storage_s3_cancelled_waits_total{request_type=(same
kinds)}`
Follow-up work:
- After release, remove the old metrics, migrate dashboards
Histogram buckets are rough guesses, need to be tuned. In pageserver we
have a download timeout of 120s, so I think the 100s bucket is quite
nice.
## Problem
neon_fixtures.py has grown to unmanageable size. It attracts conflicts.
When adding specific utils under for example `fixtures/pageserver`
things sometimes need to import stuff from `neon_fixtures.py` which
creates circular import. This is usually only needed for type
annotations, so `typing.TYPE_CHECKING` flag can mask the issue.
Nevertheless I believe that splitting neon_fixtures.py into smaller
parts is a better approach.
Currently the PR contains small things, but I plan to continue and move
NeonEnv to its own `fixtures.env` module. To keep the diff small I think
this PR can already be merged to cause less conflicts.
UPD: it looks like currently its not really possible to fully avoid
usage of `typing.TYPE_CHECKING`, because some components directly depend
on each other. I e Env -> Cli -> Env cycle. But its still worth it to
avoid it in as many places as possible. And decreasing neon_fixture's
size still makes sense.
Add infrastructure to dynamically load postgres extensions and shared libraries from remote extension storage.
Before postgres start downloads list of available remote extensions and libraries, and also downloads 'shared_preload_libraries'. After postgres is running, 'compute_ctl' listens for HTTP requests to load files.
Postgres has new GUC 'extension_server_port' to specify port on which 'compute_ctl' listens for requests.
When PostgreSQL requests a file, 'compute_ctl' downloads it.
See more details about feature design and remote extension storage layout in docs/rfcs/024-extension-loading.md
---------
Co-authored-by: Anastasia Lubennikova <anastasia@neon.tech>
Co-authored-by: Alek Westover <alek.westover@gmail.com>
## Problem
Currently we delete local files first, so if pageserver restarts after
local files deletion then remote deletion is not continued. This can be
solved with inversion of these steps.
But even if these steps are inverted when index_part.json is deleted
there is no way to distinguish between "this timeline is good, we just
didnt upload it to remote" and "this timeline is deleted we should
continue with removal of local state". So to solve it we use another
mark file. After index part is deleted presence of this mark file
indentifies that it was a deletion intention.
Alternative approach that was discussed was to delete all except
metadata first, and then delete metadata and index part. In this case we
still do not support local only configs making them rather unsafe
(deletion in them is already unsafe, but this direction solidifies this
direction instead of fixing it). Another downside is that if we crash
after local metadata gets removed we may leave dangling index part on
the remote which in theory shouldnt be a big deal because the file is
small.
It is not a big change to choose another approach at this point.
## Summary of changes
Timeline deletion sequence:
1. Set deleted_at in remote index part.
2. Create local mark file.
3. Delete local files except metadata (it is simpler this way, to be
able to reuse timeline initialization code that expects metadata)
4. Delete remote layers
5. Delete index part
6. Delete meta, timeline directory.
7. Delete mark file.
This works for local only configuration without remote storage.
Sequence is resumable from any point.
resolves#4453
resolves https://github.com/neondatabase/neon/pull/4552 (the issue was
created with async cancellation in mind, but we can still have issues
with retries if metadata is deleted among the first by remove_dir_all
(which doesnt have any ordering guarantees))
---------
Co-authored-by: Joonas Koivunen <joonas@neon.tech>
Co-authored-by: Christian Schwarz <christian@neon.tech>
## Problem
Lets keep 500 for unusual stuff that is not considered normal. Came up
during one of the discussions around console logs now seeing this 500's.
## Summary of changes
- Return 409 Conflict instead of 500
- Remove 200 ok status because it is not used anymore
## Problem
1. During the rollout we got a panic: "timeline that we were deleting
was concurrently removed from 'timelines' map" that was caused by lock
guard not being propagated to the background part of the deletion.
Existing test didnt catch it because failpoint that was used for
verification was placed earlier prior to background task spawning.
2. When looking at surrounding code one more bug was detected. We
removed timeline from the map before deletion is finished, which breaks
client retry logic, because it will indicate 404 before actual deletion
is completed which can lead to client stopping its retry poll earlier.
## Summary of changes
1. Carry the lock guard over to background deletion. Ensure existing
test case fails without applied patch (second deletion becomes stuck
without it, which eventually leads to a test failure).
2. Move delete_all call earlier so timeline is removed from the map is
the last thing done during deletion.
Additionally I've added timeline_id to the `update_gc_info` span,
because `debug_assert_current_span_has_tenant_and_timeline_id` in
`download_remote_layer` was firing when `update_gc_info` lead to
on-demand downloads via `find_lsn_for_timestamp` (caught by @problame).
This is not directly related to the PR but fixes possible flakiness.
Another smaller set of changes involves deletion wrapper used in python
tests. Now there is a simpler wrapper that waits for deletions to
complete `timeline_delete_wait_completed`. Most of the
test_delete_timeline.py tests make negative tests, i.e., "does
ps_http.timeline_delete() fail in this and that scenario".
These can be left alone. Other places when we actually do the deletions,
we need to use the helper that polls for completion.
Discussion
https://neondb.slack.com/archives/C03F5SM1N02/p1686668007396639resolves#4496
---------
Co-authored-by: Christian Schwarz <christian@neon.tech>
Delete data from s3 when timeline deletion is requested
## Summary of changes
UploadQueue is altered to support scheduling of delete operations in
stopped state. This looks weird, and I'm thinking whether there are
better options/refactorings for upload client to make it look better.
Probably can be part of https://github.com/neondatabase/neon/issues/4378
Deletion is implemented directly in existing endpoint because changes are not
that significant. If we want more safety we can separate those or create
feature flag for new behavior.
resolves [#4193](https://github.com/neondatabase/neon/issues/4193)
---------
Co-authored-by: Joonas Koivunen <joonas@neon.tech>
We have 2 ways of tenant shutdown, we should have just one.
Changes are mostly mechanical simple refactorings.
Added `warn!` on the "shutdown all remaining tasks" should trigger test
failures in the between time of not having solved the "tenant/timeline
owns all spawned tasks" issue.
Cc: #4327.
We now spawn a new task for every HTTP request, and wait on the
JoinHandle. If Hyper drops the Future, the spawned task will keep
running. This protects the rest of the pageserver code from unexpected
async cancellations.
This creates a CancellationToken for each request and passes it to the
handler function. If the HTTP request is dropped by the client, the
CancellationToken is signaled. None of the handler functions make use
for the CancellationToken currently, but they now they could.
The CancellationToken arguments also work like documentation. When
you're looking at a function signature and you see that it takes a
CancellationToken as argument, it's a nice hint that the function might
run for a long time, and won't be async cancelled. The default
assumption in the pageserver is now that async functions are not
cancellation-safe anyway, unless explictly marked as such, but this is a
nice extra reminder.
Spawning a task for each request is OK from a performance point of view
because spawning is very cheap in Tokio, and none of our HTTP requests
are very performance critical anyway.
Fixes issue #3478
If the timeline is already being deleted, return an error. We used to
notice the duplicate request and error out in
persist_index_part_with_deleted_flag(), but it's better to detect it
earlier. Add an explicit lock for the deletion.
Note: This doesn't do anything about the async cancellation problem
(github issue #3478): if the original HTTP request dropped, because the
client disconnected, the timeline deletion stops half-way through the
operation. That needs to be fixed, too, but that's a separate story.
(This is a simpler replacement for PR #4194. I'm also working on the
cancellation shielding, see PR #4314.)
Before this patch, the following sequence would lead to the resurrection of a deleted timeline:
- create timeline
- wait for its index part to reach s3
- delete timeline
- wait an arbitrary amount of time, including 0 seconds
- detach tenant
- attach tenant
- the timeline is there and Active again
This happens because we only kept track of the deletion in the tenant dir (by deleting the timeline dir) but not in S3.
The solution is to turn the deleted timeline's IndexPart into a tombstone.
The deletion status of the timeline is expressed in the `deleted_at: Option<NativeDateTime>` field of IndexPart.
It's `None` while the timeline is alive and `Some(deletion time stamp)` if it is deleted.
We change the timeline deletion handler to upload this tombstoned IndexPart.
The handler does not return success if the upload fails.
Coincidentally, this fixes the long-stanging TODO about the `std::fs::remove_dir_all` being not atomic.
It need not be atomic anymore because we set the `deleted_at=Some()` before starting the `remove_dir_all`.
The tombstone is in the IndexPart only, not in the `metadata`.
So, we only have the tombstone and the `remove_dir_all` benefits mentioned above if remote storage is configured.
This was a conscious trade-off because there's no good format evolution story for the current metadata file format.
The introduction of this additional step into `delete_timeline` was painful because delete_timeline needs to be
1. cancel-safe
2. idempotent
3. safe to call concurrently
These are mostly self-inflicted limitations that can be avoided by using request-coalescing.
PR https://github.com/neondatabase/neon/pull/4159 will do that.
fixes https://github.com/neondatabase/neon/issues/3560
refs https://github.com/neondatabase/neon/issues/3889 (part of tenant relocation)
Co-authored-by: Joonas Koivunen <joonas@neon.tech>
Co-authored-by: Christian Schwarz <christian@neon.tech>
## Describe your changes
Add Error enum for tenant state response to allow better error handling
in mgmt api
## Issue ticket number and link
#2238
## Checklist before requesting a review
- [x] I have performed a self-review of my code.
- [ ] If it is a core feature, I have added thorough tests.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [ ] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
If there are any unexpected ERRORs or WARNs in pageserver.log after test
finishes, fail the test. This requires whitelisting the errors that *are*
expected in each test, and there's also a few common errors that are
printed by most tests, which are whitelisted in the fixture itself.
With this, we don't need the special abort() call in testing mode, when
compaction or GC fails. Those failures will print ERRORs to the logs,
which will be picked up by this new mechanisms.
A bunch of errors are currently whitelisted that we probably shouldn't
be emitting in the first place, but fixing those is out of scope for this
commit, so I just left FIXME comments on them.
Similar to https://github.com/neondatabase/neon/pull/2395, introduces a state field in Timeline, that's possible to subscribe to.
Adjusts
* walreceiver to not to have any connections if timeline is not Active
* remote storage sync to not to schedule uploads if timeline is Broken
* not to create timelines if a tenant/timeline is broken
* automatically switches timelines' states based on tenant state
Does not adjust timeline's gc, checkpointing and layer flush behaviour much, since it's not safe to cancel these processes abruptly and there's task_mgr::shutdown_tasks that does similar thing.
The 'local' part was always filled in, so that was easy to merge into
into the TimelineInfo itself. 'remote' only contained two fields,
'remote_consistent_lsn' and 'awaits_download'. I made
'remote_consistent_lsn' an optional field, and 'awaits_download' is now
false if the timeline is not present remotely.
However, I kept stub versions of the 'local' and 'remote' structs for
backwards-compatibility, with a few fields that are actively used by
the control plane. They just duplicate the fields from TimelineInfo
now. They can be removed later, once the control plane has been
updated to use the new fields.
You cannot attach/detach an individual timeline, attach/detach always
applies to the whole tenant. However, you can *delete* a single timeline
from a tenant. Fix some comments and error messages that confused these
two operations.
For better ergonomics. I always found it weird that we used UUID to
actually mean a tenant or timeline ID. It worked because it happened
to have the same length, 16 bytes, but it was hacky.
Merge batch_others and batch_pg_regress. The original idea was to
split all the python tests into multiple "batches" and run each batch
in parallel as a separate CI job. However, the batch_pg_regress batch
was pretty short compared to all the tests in batch_others. We could
split batch_others into multiple batches, but it actually seems better
to just treat them as one big pool of tests and use pytest's handle
the parallelism on its own. If we need to split them across multiple
nodes in the future, we could use pytest-shard or something else,
instead of managing the batches ourselves.
Merge test_neon_regress.py, test_pg_regress.py and test_isolation.py
into one file, test_pg_regress.py. Seems more clear to group all
pg_regress-based tests into one file, now that they would all be in
the same directory.
