When walproposer observes now higher term it restarts instead of
crashing whole compute with PANIC; this avoids compute crash after
term_bump call. After successfull election we're still checking
last_log_term of the highest given vote to ensure basebackup is good,
and PANIC otherwise.
It will be used for migration per
035-safekeeper-dynamic-membership-change.md
and
https://github.com/neondatabase/docs/pull/21
ref https://github.com/neondatabase/neon/issues/8700
Check that truncation point is not from the future by comparing it with
write_record_lsn, not write_lsn, and explain that xlog switch changes
their normal order.
ref https://github.com/neondatabase/neon/issues/8911
Endpoint implementation sends msg to manager requesting to do the
reset. Manager stops current partial backup upload task if it exists and
performs the reset.
Also slightly tweak eviction condition: all full segments before
flush_lsn must be uploaded (and committed) and there must be only one
segment left on disk (partial). This allows to evict timelines which
started not on the first segment and didn't fill the whole
segment (previous condition wasn't good because last_removed_segno was
0).
ref https://github.com/neondatabase/neon/issues/8759
Going through the list of recent flaky tests, trying to fix those
related to graceful shutdown.
- test_forward_compatibility: flush and wait for uploads to avoid
graceful shutdown
- test_layer_bloating: in the end the endpoint and vanilla are still up
=> immediate shutdown
- test_lagging_sk: pageserver shutdown is not related to the test =>
immediate shutdown
- test_lsn_lease_size: pageserver flushing is not needed => immediate
shutdown
Additionally:
- remove `wait_for_upload` usage from workload fixture
Cc: #8708Fixes: #8710
## Problem
The control file contains the id of the safekeeper that uploaded it.
Previously, when sending a snapshot of the control file to another sk,
it would eventually be gc-ed by the receiving sk. This is incorrect
because the original sk might still need it later.
## Summary of Changes
When sending a snapshot and the control file contains an uploaded
segment:
* Create a copy of the segment in s3 with the destination sk in the
object name
* Tweak the streamed control file to point to the object create in the
previous step
Note that the snapshot endpoint now has to know the id of the requestor,
so the api has been extended to include the node if of the destination
sk.
Closes https://github.com/neondatabase/neon/issues/8542
## Problem
This test would occasionally fail its metric check. This could happen in
the rare case that the nodes had all been restarted before their most
recent eviction.
The metric check was added in
https://github.com/neondatabase/neon/pull/8348
## Summary of changes
- Check metrics before each restart, accumulate into a bool that we
assert on at the end of the test
## Problem
Follow up to https://github.com/neondatabase/neon/pull/8335, to improve
observability of how many evict/restores we are doing.
## Summary of changes
- Add `safekeeper_eviction_events_started_total` and
`safekeeper_eviction_events_completed_total`, with a "kind" label of
evict or restore. This gives us rates, and also ability to calculate how
many are in progress.
- Generalize SafekeeperMetrics test type to use the same helpers as
pageserver, and enable querying any metric.
- Read the new metrics at the end of the eviction test.
## Problem
- The condition for eviction is not time-based: it is possible for a
timeline to be restored in response to a client, that client times out,
and then as soon as the timeline is restored it is immediately evicted
again.
- There is no delay on eviction at startup of the safekeeper, so when it
starts up and sees many idle timelines, it does many evictions which
will likely be immediately restored when someone uses the timeline.
## Summary of changes
- Add `eviction_min_resident` parameter, and use it in
`ready_for_eviction` to avoid evictions if the timeline has been
resident for less than this period.
- This also implicitly delays evictions at startup for
`eviction_min_resident`
- Set this to a very low number for the existing eviction test, which
expects immediate eviction.
The default period is 15 minutes. The general reasoning for that is that
in the worst case where we thrash ~10k timelines on one safekeeper,
downloading 16MB for each one, we should set a period that would not
overwhelm the node's bandwidth.
- Add --safekeepers option to neon_local reconfigure
- Add it to python Endpoint reconfigure
- Implement config reload in walproposer by restarting the whole bgw when
safekeeper list changes.
ref https://github.com/neondatabase/neon/issues/6341
Fixes https://github.com/neondatabase/neon/issues/6337
Add safekeeper support to switch between `Present` and
`Offloaded(flush_lsn)` states. The offloading is disabled by default,
but can be controlled using new cmdline arguments:
```
--enable-offload
Enable automatic switching to offloaded state
--delete-offloaded-wal
Delete local WAL files after offloading. When disabled, they will be left on disk
--control-file-save-interval <CONTROL_FILE_SAVE_INTERVAL>
Pending updates to control file will be automatically saved after this interval [default: 300s]
```
Manager watches state updates and detects when there are no actvity on
the timeline and actual partial backup upload in remote storage. When
all conditions are met, the state can be switched to offloaded.
In `timeline.rs` there is `StateSK` enum to support switching between
states. When offloaded, code can access only control file structure and
cannot use `SafeKeeper` to accept new WAL.
`FullAccessTimeline` is now renamed to `WalResidentTimeline`. This
struct contains guard to notify manager about active tasks requiring
on-disk WAL access. All guards are issued by the manager, all requests
are sent via channel using `ManagerCtl`. When manager receives request
to issue a guard, it unevicts timeline if it's currently evicted.
Fixed a bug in partial WAL backup, it used `term` instead of
`last_log_term` previously.
After this commit is merged, next step is to roll this change out, as in
issue #6338.
- Make safekeeper read SAFEKEEPER_AUTH_TOKEN env variable with JWT
token to connect to other safekeepers.
- Set it in neon_local when auth is enabled.
- Create simple rust http client supporting it, and use it in pull_timeline
implementation.
- Enable auth in all pull_timeline tests.
- Make sk http_client() by default generate safekeeper wide token, it makes
easier enabling auth in all tests by default.
- Add /snapshot http endpoing streaming tar archive timeline contents up to
flush_lsn.
- Add check that term doesn't change, corresponding test passes now.
- Also prepares infra to hold off WAL removal during the basebackup.
- Sprinkle fsyncs to persist the pull_timeline result.
ref https://github.com/neondatabase/neon/issues/6340
Do pull_timeline while WAL is being removed. To this end
- extract pausable_failpoint to utils, sprinkle pull_timeline with it
- add 'checkpoint' sk http endpoint to force WAL removal.
After fixing checking for pull file status code test fails so far which is
expected.
We had an incident where pageserver requests timed out because
pageserver couldn't fetch WAL from safekeepers. This incident was caused
by a bug in safekeeper logic for timeline activation, which prevented
pageserver from finding safekeepers.
This bug was since fixed, but there is still a chance of a similar bug
in the future due to overall complexity.
We add a new broker message to "signal interest" for timeline. This
signal will be sent by pageservers `wait_lsn`, and safekeepers will
receive this signal to start broadcasting broker messages. Then every
broker subscriber will be able to find the safekeepers and connect to
them (to start fetching WAL).
This feature is not limited to pageservers and any service that wants to
download WAL from safekeepers will be able to use this discovery
request.
This commit changes pageserver's connection_manager (walreceiver) to
send a SafekeeperDiscoveryRequest when there is no information about
safekeepers present in memory. Current implementation will send these
requests only if there is an active wait_lsn() call and no more often
than once per 10 seconds.
Add `test_broker_discovery` to test this: safekeepers started with
`--disable-periodic-broker-push` will not push info to broker so that
pageserver must use a discovery to start fetching WAL.
Add task_stats in safekeepers broker module to log a warning if there is
no message received from the broker for the last 10 seconds.
Closes#5471
---------
Co-authored-by: Christian Schwarz <christian@neon.tech>
The walproposer pretends to be a walsender in many ways. It has a
WalSnd slot, it claims to be a walsender by calling
MarkPostmasterChildWalSender() etc. But one different to real
walsenders was that the postmaster still treated it as a bgworker
rather than a walsender. The difference is that at shutdown,
walsenders are not killed until the very end, after the checkpointer
process has written the shutdown checkpoint and exited.
As a result, the walproposer always got killed before the shutdown
checkpoint was written, so the shutdown checkpoint never made it to
safekeepers. That's fine in principle, we don't require a clean
shutdown after all. But it also feels a bit silly not to stream the
shutdown checkpoint. It could be useful for initializing hot standby
mode in a read replica, for example.
Change postmaster to treat background workers that have called
MarkPostmasterChildWalSender() as walsenders. That unfortunately
requires another small change in postgres core.
After doing that, walproposers stay alive longer. However, it also
means that the checkpointer will wait for the walproposer to switch to
WALSNDSTATE_STOPPING state, when the checkpointer sends the
PROCSIG_WALSND_INIT_STOPPING signal. We don't have the machinery in
walproposer to receive and handle that signal reliably. Instead, we
mark walproposer as being in WALSNDSTATE_STOPPING always.
In commit 568f91420a, I assumed that shutdown will wait for all the
remaining WAL to be streamed to safekeepers, but before this commit
that was not true, and the test became flaky. This should make it
stable again.
Some tests wrongly assumed that no WAL could have been written between
pg_current_wal_flush_lsn and quick pg stop after it. Fix them by introducing
flush_ep_to_pageserver which first stops the endpoint and then waits till all
committed WAL reaches the pageserver.
In passing extract safekeeper http client to its own module.
Commit 9a6c0be823 removed the code that printed these warnings:
marking {} as locally complete, while it doesnt exist in remote index
No timelines to attach received
Remove those warnings from all the allowlists in tests.
In the most straightforward way; safekeeper performs it in DELETE endpoint
implementation, with no coordination between sks.
delete_force endpoint in the code is renamed to delete as there is only one way
to delete.
Implement API for cloning a single timeline inside a safekeeper. Also
add API for calculating a sha256 hash of WAL, which is used in tests.
`/copy` API works by copying objects inside S3 for all but the last
segments, and the last segments are copied on-disk. A special temporary
directory is created for a timeline, because copy can take a lot of
time, especially for large timelines. After all files segments have been
prepared, this directory is mounted to the main tree and timeline is
loaded to memory.
Some caveats:
- large timelines can take a lot of time to copy, because we need to
copy many S3 segments
- caller should wait for HTTP call to finish indefinetely and don't
close the HTTP connection, because it will stop the process, which is
not continued in the background
- `until_lsn` must be a valid LSN, otherwise bad things can happen
- API will return 200 if specified `timeline_id` already exists, even if
it's not a copy
- each safekeeper will try to copy S3 segments, so it's better to not
call this API in-parallel on different safekeepers
It has caveats such as creating half empty segment which can't be
offloaded. Instead we'll pursue approach of pull_timeline, seeding new state
from some peer.
## Problem
This was wasting resources: if we run a test with mock s3 we don't then
need to run it again with local fs. When we're running in CI, we don't
need to run with the mock/local storage as well as real S3. There is
some value in having CI notice/spot issues that might otherwise only
happen when running locally, but that doesn't justify the cost of
running the tests so many more times on every PR.
## Summary of changes
- For tests that used available_remote_storages or
available_s3_storages, update them to either specify no remote storage
(therefore inherit the default, which is currently local fs), or to
specify s3_storage() for the tests that actually want an S3 API.
## Problem
Some existing tests are written in a way that's incompatible with tenant
generations.
## Summary of changes
Update all the tests that need updating: this is things like calling
through the NeonPageserver.tenant_attach helper to get a generation
number, instead of calling directly into the pageserver API. There are
various more subtle cases.
aiming for faster to understand a bunch of `.stdout` and `.stderr`
files, see example echo_1.stdout differences:
```
+# echo foobar abbacd
+
foobar abbacd
```
it can be disabled and is disabled in this PR for some tests; use
`pg_bin.run_capture(..., with_command_header=False)` for that.
as a bonus this cleans up the echoed newlines from s3_scrubber
output which are also saved to file but echoed to test log.
Co-authored-by: Alexander Bayandin <alexander@neon.tech>
Implements fetching of WAL by safekeeper from another safekeeper by imitating
behaviour of last elected leader. This allows to avoid WAL accumulation on
compute and facilitates faster compute startup as it doesn't need to download
any WAL. Actually removing WAL download in walproposer is a matter of another
patch though.
There is a per timeline task which always runs, checking regularly if it should
start recovery frome someone, meaning there is something to fetch and there is
no streaming compute. It then proceeds with fetching, finishing when there is
nothing more to receive.
Implements https://github.com/neondatabase/neon/pull/4875
Refactor tests to have less globals.
This will allow to hopefully write more complex tests for our new metric
collection requirements in #5297. Includes reverted work from #4761
related to test globals.
Co-authored-by: Alexander Bayandin <alexander@neon.tech>
Co-authored-by: MMeent <matthias@neon.tech>
Remote storage cleanup split from #5198:
- pageserver, extensions, and safekeepers now have their separate remote
storage
- RemoteStorageKind has the configuration code
- S3Storage has the cleanup code
- with MOCK_S3, pageserver, extensions, safekeepers use different
buckets
- with LOCAL_FS, `repo_dir / "local_fs_remote_storage" / $user` is used
as path, where $user is `pageserver`, `safekeeper`
- no more `NeonEnvBuilder.enable_xxx_remote_storage` but one
`enable_{pageserver,extensions,safekeeper}_remote_storage`
Should not have any real changes. These will allow us to default to
`LOCAL_FS` for pageserver on the next PR, remove
`RemoteStorageKind.NOOP`, work towards #5172.
Co-authored-by: Alexander Bayandin <alexander@neon.tech>
## Problem
Tests using remote storage have manually entered `test_name` parameters,
which:
- Are easy to accidentally duplicate when copying code to make a new
test
- Omit parameters, so don't actually create unique S3 buckets when
running many tests concurrently.
## Summary of changes
- Use the `request` fixture in neon_env_builder fixture to get the test
name, then munge that into an S3 compatible bucket name.
- Remove the explicit `test_name` parameters to enable_remote_storage
I made a mistake when I adding `env.initial_timeline:
Optional[TimelineId]` in the #3839, should had just generated it and
used it to create a specific timeline. This PR fixes those mistakes, and
some extra calling into psql which must be slower than python field
access.
To this end add
1) -e option to 'neon_local safekeeper start' command appending extra options
to safekeeper invocation;
2) Allow multiple occurrences of the same option in safekeepers, the last
value is taken.
3) Allow to specify empty string for *-auth-public-key-path opts, it
disables auth for the service.
It allows term leader to ensure he pulls data from the correct term. Absense of
it wasn't very problematic due to CRC checks, but let's be strict.
walproposer still doesn't use it as we're going to remove recovery completely
from it.
## Problem
neon_fixtures.py has grown to unmanageable size. It attracts conflicts.
When adding specific utils under for example `fixtures/pageserver`
things sometimes need to import stuff from `neon_fixtures.py` which
creates circular import. This is usually only needed for type
annotations, so `typing.TYPE_CHECKING` flag can mask the issue.
Nevertheless I believe that splitting neon_fixtures.py into smaller
parts is a better approach.
Currently the PR contains small things, but I plan to continue and move
NeonEnv to its own `fixtures.env` module. To keep the diff small I think
this PR can already be merged to cause less conflicts.
UPD: it looks like currently its not really possible to fully avoid
usage of `typing.TYPE_CHECKING`, because some components directly depend
on each other. I e Env -> Cli -> Env cycle. But its still worth it to
avoid it in as many places as possible. And decreasing neon_fixture's
size still makes sense.
Compute now uses special safekeeper WAL service port allowing auth tokens with
only tenant scope. Adds understanding of this port to neon_local and fixtures,
as well as test of both ports behaviour with different tokens.
ref https://github.com/neondatabase/neon/issues/4730
