The theme of the changes in this PR is that they're enablers for #6251
which are superficial struct/api changes.
This is a spinoff from #6251:
- Various APIs + clients thereof take TenantShardId rather than TenantId
- The creation API gets a ShardParameters member, which may be used to
configure shard count and stripe size. This enables the attachment
service to present a "virtual pageserver" creation endpoint that creates
multiple shards.
- The attachment service will use tenant size information to drive shard
splitting. Make a version of `TenantHistorySize` that is usable for
decoding these API responses.
- ComputeSpec includes a shard stripe size.
Generally useful when debugging / troubleshooting.
I found this useful when manually duplicating a tenant from a script[^1]
where I can't use `neon_fixtures.Pageserver.tenant_attach`'s automatic
integration with the neon_local's attachment_service.
[^1]: https://github.com/neondatabase/neon/pull/6349
PR #6266 broke the getpage_latest_lsn benchmark.
Before this patch, we'd fail with
```
not implemented: split up range
```
because `r.start = rel size key` and `r.end = rel size key + 1`.
The filtering of the key ranges in that loop is a bit ugly, but,
I measured:
* setup with 180k layer files (20k tenants * 9 layers).
* total physical size is 463GiB
* 5k tenants, the range filtering takes `0.6 seconds` on an
i3en.3xlarge.
That's a tiny fraction of the overall time it takes for pagebench to get
ready to send requests. So, this is good enough for now / there are
other bottlenecks that are bigger.
Before this PR, `is_rel_block_key` returns true for the blknum
`0xffffffff`,
which is a blknum that's actually never written by Postgres, but used by
Neon Pageserver to store the relsize.
Quoting @MMeent:
> PostgreSQL can't extend the relation beyond size of 0xFFFFFFFF blocks,
> so block number 0xFFFFFFFE is the last valid block number.
This PR changes the definition of the function to exclude blknum
0xffffffff.
My motivation for doing this change is to fix the `pagebench` getpage
benchmark, which uses `is_rel_block_key` to filter the keyspace for
valid pages to request from page_service.
fixes https://github.com/neondatabase/neon/issues/6210
I checked other users of the function.
The first one is `key_is_shard0`, which already had added an exemption
for 0xffffffff. So, there's no functional change with this PR.
The second one is `DatadirModification::flush`[^1]. With this PR,
`.flush()` will skip the relsize key, whereas it didn't
before. This means we will pile up all the relsize key-value pairs
`(Key,u32)`
in `DatadirModification::pending_updates` until `.commit()` is called.
The only place I can think of where that would be a problem is if we
import from a full basebackup, and don't `.commit()` regularly,
like we currently don't do in `import_basebackup_from_tar`.
It exposes us to input-controlled allocations.
However, that was already the case for the other keys that are skipped,
so, one can argue that this change is not making the situation much
worse.
[^1]: That type's `flush()` and `commit()` methods are terribly named,
but,
that's for another time
This PR adds a component-level benchmarking utility for pageserver.
Its name is `pagebench`.
The problem solved by `pagebench` is that we want to put Pageserver
under high load.
This isn't easily achieved with `pgbench` because it needs to go through
a compute, which has signficant performance overhead compared to
accessing Pageserver directly.
Further, compute has its own performance optimizations (most
importantly: caches). Instead of designing a compute-facing workload
that defeats those internal optimizations, `pagebench` simply bypasses
them by accessing pageserver directly.
Supported benchmarks:
* getpage@latest_lsn
* basebackup
* triggering logical size calculation
This code has no automated users yet.
A performance regression test for getpage@latest_lsn will be added in a
later PR.
part of https://github.com/neondatabase/neon/issues/5771
This is a precursor to:
- https://github.com/neondatabase/neon/pull/6185
While that PR contains big changes to neon_local and attachment_service,
this PR contains a few unrelated standalone changes generated while
working on that branch:
- Fix restarting a pageserver when it contains multiple shards for the
same tenant
- When using location_config api to attach a tenant, create its
timelines dir
- Update test paths where generations were previously optional to make
them always-on: this avoids tests having to spuriously assert that
attachment_service is not None in order to make the linter happy.
- Add a TenantShardId python implementation for subsequent use in test
helpers that will be made shard-aware
- Teach scrubber to read across shards when checking for layer
existence: this is a refactor to track the list of existent layers at
tenant-level rather than locally to each timeline. This is a precursor
to testing shard splitting.
Part of getpage@lsn benchmark epic:
https://github.com/neondatabase/neon/issues/5771
This allows getting the list of tenants and timelines without triggering
initial logical size calculation by requesting the timeline details API
response, which would skew our results.
Dependency (commits inline):
https://github.com/neondatabase/neon/pull/5842
## Problem
Secondary mode tenants need a manifest of what to download. Ultimately
this will be some kind of heat-scored set of layers, but as a robust
first step we will simply use the set of resident layers: secondary
tenant locations will aim to match the on-disk content of the attached
location.
## Summary of changes
- Add heatmap types representing the remote structure
- Add hooks to Tenant/Timeline for generating these heatmaps
- Create a new `HeatmapUploader` type that is external to `Tenant`, and
responsible for walking the list of attached tenants and scheduling
heatmap uploads.
Notes to reviewers:
- Putting the logic for uploads (and later, secondary mode downloads)
outside of `Tenant` is an opinionated choice, motivated by:
- Enable future smarter scheduling of operations, e.g. uploading the
stalest tenant first, rather than having all tenants compete for a fair
semaphore on a first-come-first-served basis. Similarly for downloads,
we may wish to schedule the tenants with the hottest un-downloaded
layers first.
- Enable accessing upload-related state without synchronization (it
belongs to HeatmapUploader, rather than being some Mutex<>'d part of
Tenant)
- Avoid further expanding the scope of Tenant/Timeline types, which are
already among the largest in the codebase
- You might reasonably wonder how much of the uploader code could be a
generic job manager thing. Probably some of it: but let's defer pulling
that out until we have at least two users (perhaps secondary downloads
will be the second one) to highlight which bits are really generic.
Compromises:
- Later, instead of using digests of heatmaps to decide whether anything
changed, I would prefer to avoid walking the layers in tenants that
don't have changes: tracking that will be a bit invasive, as it needs
input from both remote_timeline_client and Layer.
## Problem
In https://github.com/neondatabase/neon/pull/5957, the most essential
types were updated to use TenantShardId rather than TenantId. That
unblocked other work, but didn't fully enable running multiple shards
from the same tenant on the same pageserver.
## Summary of changes
- Use TenantShardId in page cache key for materialized pages
- Update mgr.rs get_tenant() and list_tenants() functions to use a shard
id, and update all callers.
- Eliminate the exactly_one_or_none helper in mgr.rs and all code that
used it
- Convert timeline HTTP routes to use tenant_shard_id
Note on page cache:
```
struct MaterializedPageHashKey {
/// Why is this TenantShardId rather than TenantId?
///
/// Usually, the materialized value of a page@lsn is identical on any shard in the same tenant. However, this
/// this not the case for certain internally-generated pages (e.g. relation sizes). In future, we may make this
/// key smaller by omitting the shard, if we ensure that reads to such pages always skip the cache, or are
/// special-cased in some other way.
tenant_shard_id: TenantShardId,
timeline_id: TimelineId,
key: Key,
}
```
## Problem
Currently, if one creates many shards they will all ingest all the data:
not much use! We want them to ingest a proportional share of the data
each.
Closes: #6025
## Summary of changes
- WalIngest object gets a copy of the ShardIdentity for the Tenant it
was created by.
- While iterating the `blocks` part of a decoded record, blocks that do
not match the current shard are ignored, apart from on shard zero where
they are used to update relation sizes in `observe_decoded_block` (but
not stored).
- Before committing a `DataDirModificiation` from a WAL record, we check
if it's empty, and drop the record if so. This check is necessary
(rather than just looking at the `blocks` part) because certain record
types may modify blocks in non-obvious ways (e.g.
`ingest_heapam_record`).
- Add WAL ingest metrics to record the total received, total committed,
and total filtered out
- Behaviour for unsharded tenants is unchanged: they will continue to
ingest all blocks, and will take the fast path through `is_key_local`
that doesn't bother calculating any hashes.
After this change, shards store a subset of the tenant's total data, and
accurate relation sizes are only maintained on shard zero.
---------
Co-authored-by: Arpad Müller <arpad-m@users.noreply.github.com>
## Problem
Some existing tests are written in a way that's incompatible with tenant
generations.
## Summary of changes
Update all the tests that need updating: this is things like calling
through the NeonPageserver.tenant_attach helper to get a generation
number, instead of calling directly into the pageserver API. There are
various more subtle cases.
to_string forces allocating a less than pointer sized string (costing on
stack 4 usize), using a Display formattable slug saves that. the
difference seems small, but at the same time, we log these a lot.
## Problem
When a pageserver receives a page service request identified by
TenantId, it must decide which `Tenant` object to route it to.
As in earlier PRs, this stuff is all a no-op for tenants with a single
shard: calls to `is_key_local` always return true without doing any
hashing on a single-shard ShardIdentity.
Closes: https://github.com/neondatabase/neon/issues/6026
## Summary of changes
- Carry immutable `ShardIdentity` objects in Tenant and Timeline. These
provide the information that Tenants/Timelines need to figure out which
shard is responsible for which Key.
- Augment `get_active_tenant_with_timeout` to take a `ShardSelector`
specifying how the shard should be resolved for this tenant. This mode
depends on the kind of request (e.g. basebackups always go to shard
zero).
- In `handle_get_page_at_lsn_request`, handle the case where the
Timeline we looked up at connection time is not the correct shard for
the page being requested. This can happen whenever one node holds
multiple shards for the same tenant. This is currently written as a
"slow path" with the optimistic expectation that usually we'll run with
one shard per pageserver, and the Timeline resolved at connection time
will be the one serving page requests. There is scope for optimization
here later, to avoid doing the full shard lookup for each page.
- Omit consumption metrics from nonzero shards: only the 0th shard is
responsible for tracing accurate relation sizes.
Note to reviewers:
- Testing of these changes is happening separately on the
`jcsp/sharding-pt1` branch, where we have hacked neon_local etc needed
to run a test_pg_regress.
- The main caveat to this implementation is that page service
connections still look up one Timeline when the connection is opened,
before they know which pages are going to be read. If there is one shard
per pageserver then this will always also be the Timeline that serves
page requests. However, if multiple shards are on one pageserver then
get page requests will incur the cost of looking up the correct Timeline
on each getpage request. We may look to improve this in future with a
"sticky" timeline per connection handler so that subsequent requests for
the same Timeline don't have to look up again, and/or by having postgres
pass a shard hint when connecting. This is tracked in the "Loose ends"
section of https://github.com/neondatabase/neon/issues/5507
I would love to not expose the in-accurate value int he mgmt API at all,
and in fact control plane doesn't use it [^1].
But our tests do, and I have no desire to change them at this time.
[^1]: https://github.com/neondatabase/cloud/pull/8317
This PR adds an `existing_initdb_timeline_id` option to timeline
creation APIs, taking an optional timeline ID.
Follow-up of #5390.
If the `existing_initdb_timeline_id` option is specified via the HTTP
API, the pageserver downloads the existing initdb archive from the given
timeline ID and extracts it, instead of running initdb itself.
---------
Co-authored-by: Christian Schwarz <christian@neon.tech>
Remove handcrafted TenantConf deserialization code. Use
`serde_path_to_error` to include the field which failed parsing. Leaves
the duplicated TenantConf in pageserver and models, does not touch
PageserverConf handcrafted deserialization.
Error change:
- before change: "configure option `checkpoint_distance` cannot be
negative"
- after change: "`checkpoint_distance`: invalid value: integer `-1`,
expected u64"
Fixes: #5300
Cc: #3682
---------
Signed-off-by: Rahul Modpur <rmodpur2@gmail.com>
Co-authored-by: Shany Pozin <shany@neon.tech>
Co-authored-by: Joonas Koivunen <joonas@neon.tech>
(includes two preparatory commits from
https://github.com/neondatabase/neon/pull/5960)
## Problem
To accommodate multiple shards in the same tenant on the same
pageserver, we must include the full TenantShardId in local paths. That
means that all code touching local storage needs to see the
TenantShardId.
## Summary of changes
- Replace `tenant_id: TenantId` with `tenant_shard_id: TenantShardId` on
Tenant, Timeline and RemoteTimelineClient.
- Use TenantShardId in helpers for building local paths.
- Update all the relevant call sites.
This doesn't update absolutely everything: things like PageCache,
TaskMgr, WalRedo are still shard-naive. The purpose of this PR is to
update the core types so that others code can be added/updated
incrementally without churning the most central shared types.
## Problem
The TenantShardId in API URLs is sufficient to uniquely identify a
tenant shard, but not for it to function: it also needs to know its full
sharding configuration (stripe size, layout version) in order to map
keys to shards.
## Summary of changes
- Introduce ShardIdentity: this is the superset of ShardIndex (#5924 )
that is required for translating keys to shard numbers.
- Include ShardIdentity as an optional attribute of LocationConf
- Extend the public `LocationConfig` API structure with a flat
representation of shard attributes.
The net result is that at the point we construct a `Tenant`, we have a
`ShardIdentity` (inside LocationConf). This enables the next steps to
actually use the ShardIdentity to split WAL and validate that page
service requires are reaching the correct shard.
## Problem
For sharded tenants, the layer keys must include the shard number and
shard count, to disambiguate keys written by different shards in the
same tenant (shard number), and disambiguate layers written before and
after splits (shard count).
Closes: https://github.com/neondatabase/neon/issues/5924
## Summary of changes
There are no functional changes in this PR: everything behaves the same
for the default ShardIndex::unsharded() value. Actual construct of
sharded tenants will come next.
- Add a ShardIndex type: this is just a wrapper for a ShardCount and
ShardNumber. This is a subset of ShardIdentity: whereas ShardIdentity
contains enough information to filter page keys, ShardIndex contains
just enough information to construct a remote key. ShardIndex has a
compact encoding, the same as the shard part of TenantShardId.
- Store the ShardIndex as part of IndexLayerMetadata, if it is set to a
different value than ShardIndex::unsharded.
- Update RemoteTimelineClient and DeletionQueue to construct paths using
the layer metadata. Deletion code paths that previously just passed a
`Generation` now pass a full `LayerFileMetadata` to capture the shard as
well.
Notes to reviewers:
- In deletion code paths, I could have used a (Generation, ShardIndex)
instead of the full LayerFileMetadata. I opted for the full object
partly for brevity, and partly because in future when we add checksums
the deletion code really will care about the full metadata in order to
validate that it is deleting what was intended.
- While ShardIdentity and TenantShardId could both use a ShardIndex, I
find that they read more cleanly as "flat" structs that spell out the
shard count and number field separately. Serialization code would need
writing out by hand anyway, because TenantShardId's serialized form is
not a serde struct-style serialization.
- ShardIndex doesn't _have_ to exist (we could use ShardIdentity
everywhere), but it is a worthwhile optimization, as we will have many
copies of this as part of layer metadata. In future the size difference
betweedn ShardIndex and ShardIdentity may become larger if we implement
more sophisticated key distribution mechanisms (i.e. new values of
ShardIdentity::layout).
---------
Co-authored-by: Christian Schwarz <christian@neon.tech>
## Problem
When using TenantId as the key, we are unable to handle multiple tenant
shards attached to the same pageserver for the same tenant ID. This is
an expected scenario if we have e.g. 8 shards and 5 pageservers.
## Summary of changes
- TenantsMap is now a BTreeMap instead of a HashMap: this enables
looking up by range. In future, we will need this for page_service, as
incoming requests will just specify the Key, and we'll have to figure
out which shard to route it to.
- A new key type TenantShardId is introduced, to act as the key in
TenantsMap, and as the id type in external APIs. Its human readable
serialization is backward compatible with TenantId, and also
forward-compatible as long as sharding is not actually used (when we
construct a TenantShardId with ShardCount(0), it serializes to an
old-fashioned TenantId).
- Essential tenant APIs are updated to accept TenantShardIds:
tenant/timeline create, tenant delete, and /location_conf. These are the
APIs that will enable driving sharded tenants. Other apis like /attach
/detach /load /ignore will not work with sharding: those will soon be
deprecated and replaced with /location_conf as part of the live
migration work.
Closes: #5787
Improve the serde impl for several types (`Lsn`, `TenantId`,
`TimelineId`) by making them sensitive to
`Serializer::is_human_readadable` (true for json, false for bincode).
Fixes#3511 by:
- Implement the custom serde for `Lsn`
- Implement the custom serde for `Id`
- Add the helper module `serde_as_u64` in `libs/utils/src/lsn.rs`
- Remove the unnecessary attr `#[serde_as(as = "DisplayFromStr")]` in
all possible structs
Additionally some safekeeper types gained serde tests.
---------
Co-authored-by: Joonas Koivunen <joonas@neon.tech>
## Problem
## Summary of changes
## Checklist before requesting a review
- [x] I have performed a self-review of my code.
- [ ] ~~If it is a core feature, I have added thorough tests.~~
- [ ] ~~Do we need to implement analytics? if so did you add the
relevant metrics to the dashboard?~~
- [ ] ~~If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.~~
## Checklist before merging
- [ ] Do not forget to reformat commit message to not include the above
checklist
## Problem
The pageserver had two ways of loading a tenant:
- `spawn_load` would trust on-disk content to reflect all existing
timelines
- `spawn_attach` would list timelines in remote storage.
It was incorrect for `spawn_load` to trust local disk content, because
it doesn't know if the tenant might have been attached and written
somewhere else. To make this correct would requires some generation
number checks, but the payoff is to avoid one S3 op per tenant at
startup, so it's not worth the complexity -- it is much simpler to have
one way to load a tenant.
## Summary of changes
- `Tenant` objects are always created with `Tenant::spawn`: there is no
more distinction between "load" and "attach".
- The ability to run without remote storage (for `neon_local`) is
preserved by adding a branch inside `attach` that uses a fallback
`load_local` if no remote_storage is present.
- Fix attaching a tenant when it has a timeline with no IndexPart: this
can occur if a newly created timeline manages to upload a layer before
it has uploaded an index.
- The attach marker file that used to indicate whether a tenant should
be "loaded" or "attached" is no longer needed, and is removed.
- The GenericRemoteStorage interface gets a `list()` method that maps
more directly to what ListObjects does, returning both keys and common
prefixes. The existing `list_files` and `list_prefixes` methods are just
calls into `list()` now -- these can be removed later if we would like
to shrink the interface a bit.
- The remote deletion marker is moved into `timelines/` and detected as
part of listing timelines rather than as a separate GET request. If any
existing tenants have a marker in the old location (unlikely, only
happens if something crashes mid-delete), then they will rely on the
control plane retrying to complete their deletion.
- Revise S3 calls for timeline listing and tenant load to take a
cancellation token, and retry forever: it never makes sense to make a
Tenant broken because of a transient S3 issue.
## Breaking changes
- The remote deletion marker is moved from `deleted` to
`timelines/deleted` within the tenant prefix. Markers in the old
location will be ignored: it is the control plane's responsibility to
retry deletions until they succeed. Markers in the new location will be
tolerated by the previous release of pageserver via
https://github.com/neondatabase/neon/pull/5632
- The local `attaching` marker file is no longer written. Therefore, if
the pageserver is downgraded after running this code, the old pageserver
will not be able to distinguish between partially attached tenants and
fully attached tenants. This would only impact tenants that were partway
through attaching at the moment of downgrade. In the unlikely even t
that we do experience an incident that prompts us to roll back, then we
may check for attach operations in flight, and manually insert
`attaching` marker files as needed.
---------
Co-authored-by: Christian Schwarz <christian@neon.tech>
## Problem
These changes are part of building seamless tenant migration, as
described in the RFC:
- https://github.com/neondatabase/neon/pull/5029
## Summary of changes
- A new configuration type `LocationConf` supersedes `TenantConfOpt` for
storing a tenant's configuration in the pageserver repo dir. It contains
`TenantConfOpt`, as well as a new `mode` attribute that describes what
kind of location this is (secondary, attached, attachment mode etc). It
is written to a file called `config-v1` instead of `config` -- this
prepares us for neatly making any other profound changes to the format
of the file in future. Forward compat for existing pageserver code is
achieved by writing out both old and new style files. Backward compat is
achieved by checking for the old-style file if the new one isn't found.
- The `TenantMap` type changes, to hold `TenantSlot` instead of just
`Tenant`. The `Tenant` type continues to be used for attached tenants
only. Tenants in other states (such as secondaries) are represented by a
different variant of `TenantSlot`.
- Where `Tenant` & `Timeline` used to hold an Arc<Mutex<TenantConfOpt>>,
they now hold a reference to a AttachedTenantConf, which includes the
extra information from LocationConf. This enables them to know the
current attachment mode.
- The attachment mode is used as an advisory input to decide whether to
do compaction and GC (AttachedStale is meant to avoid doing uploads,
AttachedMulti is meant to avoid doing deletions).
- A new HTTP API is added at `PUT /tenants/<tenant_id>/location_config`
to drive new location configuration. This provides a superset of the
functionality of attach/detach/load/ignore:
- Attaching a tenant is just configuring it in an attached state
- Detaching a tenant is configuring it to a detached state
- Loading a tenant is just the same as attaching it
- Ignoring a tenant is the same as configuring it into Secondary with
warm=false (i.e. retain the files on disk but do nothing else).
Caveats:
- AttachedMulti tenants don't do compaction in this PR, but they do in
the follow on #5397
- Concurrent updates to the `location_config` API are not handled
elegantly in this PR, a better mechanism is added in the follow on
https://github.com/neondatabase/neon/pull/5367
- Secondary mode is just a placeholder in this PR: the code to upload
heatmaps and do downloads on secondary locations will be added in a
later PR (but that shouldn't change any external interfaces)
Closes: https://github.com/neondatabase/neon/issues/5379
---------
Co-authored-by: Christian Schwarz <christian@neon.tech>
## Problem
Pageservers must not delete objects or advertise updates to
remote_consistent_lsn without checking that they hold the latest
generation for the tenant in question (see [the RFC](
https://github.com/neondatabase/neon/blob/main/docs/rfcs/025-generation-numbers.md))
In this PR:
- A new "deletion queue" subsystem is introduced, through which
deletions flow
- `RemoteTimelineClient` is modified to send deletions through the
deletion queue:
- For GC & compaction, deletions flow through the full generation
verifying process
- For timeline deletions, deletions take a fast path that bypasses
generation verification
- The `last_uploaded_consistent_lsn` value in `UploadQueue` is replaced
with a mechanism that maintains a "projected" lsn (equivalent to the
previous property), and a "visible" LSN (which is the one that we may
share with safekeepers).
- Until `control_plane_api` is set, all deletions skip generation
validation
- Tests are introduced for the new functionality in
`test_pageserver_generations.py`
Once this lands, if a pageserver is configured with the
`control_plane_api` configuration added in
https://github.com/neondatabase/neon/pull/5163, it becomes safe to
attach a tenant to multiple pageservers concurrently.
---------
Co-authored-by: Joonas Koivunen <joonas@neon.tech>
Co-authored-by: Christian Schwarz <christian@neon.tech>
Add a `walreceiver_state` field to `TimelineInfo` (response of `GET /v1/tenant/:tenant_id/timeline/:timeline_id`) and while doing that, refactor out a common `Timeline::walreceiver_state(..)`. No OpenAPI changes, because this is an internal debugging addition.
Fixes#3115.
Co-authored-by: Joonas Koivunen <joonas.koivunen@gmail.com>
## Problem
- #5050
Closes: https://github.com/neondatabase/neon/issues/5136
## Summary of changes
- A new configuration property `control_plane_api` controls other
functionality in this PR: if it is unset (default) then everything still
works as it does today.
- If `control_plane_api` is set, then on startup we call out to control
plane `/re-attach` endpoint to discover our attachments and their
generations. If an attachment is missing from the response we implicitly
detach the tenant.
- Calls to pageserver `/attach` API may include a `generation`
parameter. If `control_plane_api` is set, then this parameter is
mandatory.
- RemoteTimelineClient's loading of index_part.json is generation-aware,
and will try to load the index_part with the most recent generation <=
its own generation.
- The `neon_local` testing environment now includes a new binary
`attachment_service` which implements the endpoints that the pageserver
requires to operate. This is on by default if running `cargo neon` by
hand. In `test_runner/` tests, it is off by default: existing tests
continue to run with in the legacy generation-less mode.
Caveats:
- The re-attachment during startup assumes that we are only re-attaching
tenants that have previously been attached, and not totally new tenants
-- this relies on the control plane's attachment logic to keep retrying
so that we should eventually see the attach API call. That's important
because the `/re-attach` API doesn't tell us which timelines we should
attach -- we still use local disk state for that. Ref:
https://github.com/neondatabase/neon/issues/5173
- Testing: generations are only enabled for one integration test right
now (test_pageserver_restart), as a smoke test that all the machinery
basically works. Writing fuller tests that stress tenant migration will
come later, and involve extending our test fixtures to deal with
multiple pageservers.
- I'm not in love with "attachment_service" as a name for the neon_local
component, but it's not very important because we can easily rename
these test bits whenever we want.
- Limited observability when in re-attach on startup: when I add
generation validation for deletions in a later PR, I want to wrap up the
control plane API calls in some small client class that will expose
metrics for things like errors calling the control plane API, which will
act as a strong red signal that something is not right.
Co-authored-by: Christian Schwarz <christian@neon.tech>
Co-authored-by: Joonas Koivunen <joonas@neon.tech>
Adds in a barrier for the duration of the `Tenant::shutdown`.
`pageserver_shutdown` will join this await, `detach`es and `ignore`s
will not.
Fixes#4429.
---------
Co-authored-by: Christian Schwarz <christian@neon.tech>
## Problem
`cargo +nightly doc` is giving a lot of warnings: broken links, naked
URLs, etc.
## Summary of changes
* update the `proc-macro2` dependency so that it can compile on latest
Rust nightly, see https://github.com/dtolnay/proc-macro2/pull/391 and
https://github.com/dtolnay/proc-macro2/issues/398
* allow the `private_intra_doc_links` lint, as linking to something
that's private is always more useful than just mentioning it without a
link: if the link breaks in the future, at least there is a warning due
to that. Also, one might enable
[`--document-private-items`](https://doc.rust-lang.org/cargo/commands/cargo-doc.html#documentation-options)
in the future and make these links work in general.
* fix all the remaining warnings given by `cargo +nightly doc`
* make it possible to run `cargo doc` on stable Rust by updating
`opentelemetry` and associated crates to version 0.19, pulling in a fix
that previously broke `cargo doc` on stable:
https://github.com/open-telemetry/opentelemetry-rust/pull/904
* Add `cargo doc` to CI to ensure that it won't get broken in the
future.
Fixes#2557
## Future work
* Potentially, it might make sense, for development purposes, to publish
the generated rustdocs somewhere, like for example [how the rust
compiler does
it](https://doc.rust-lang.org/nightly/nightly-rustc/rustc_driver/index.html).
I will file an issue for discussion.
Delete data from s3 when timeline deletion is requested
## Summary of changes
UploadQueue is altered to support scheduling of delete operations in
stopped state. This looks weird, and I'm thinking whether there are
better options/refactorings for upload client to make it look better.
Probably can be part of https://github.com/neondatabase/neon/issues/4378
Deletion is implemented directly in existing endpoint because changes are not
that significant. If we want more safety we can separate those or create
feature flag for new behavior.
resolves [#4193](https://github.com/neondatabase/neon/issues/4193)
---------
Co-authored-by: Joonas Koivunen <joonas@neon.tech>
## Problem
Attach failures are not reported in public part of the api (in
`attachment_status` field of TenantInfo).
## Summary of changes
Expose TenantState::Broken as TenantAttachmentStatus::Failed
In the way its written Failed status will be reported even if no
attachment happened. (I e if tenant become broken on startup). This is
in line with other members. I e Active will be resolved to Attached even
if no actual attach took place.
This can be tweaked if needed. At the current stage it would be overengineering without clear motivation
resolves#4344
This parameter can be use to restrict number of image layers generated
because of GC request (wanted image layers).
Been set to zero it completely eliminates creation of such image layers.
So it allows to avoid extra storage consumption after merging #3673
## Problem
PR #3673 forces generation of missed image layers. So i short term is
cause cause increase (in worst case up to two times) size of storage.
It was intended (by me) that GC period is comparable with PiTR interval.
But looks like it is not the case now - GC is performed much more
frequently. It may cause the problem with space exhaustion: GC forces
new image creation while large PiTR still prevent GC from collecting old
layers.
## Summary of changes
Add new pageserver parameter` forced_image_creation_limit` which
restrict number of created image layers which are requested by GC.
## Checklist before requesting a review
- [ ] I have performed a self-review of my code.
- [ ] If it is a core feature, I have added thorough tests.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [ ] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
## Checklist before merging
- [ ] Do not forget to reformat commit message to not include the above
checklist
This is preliminary work for/from #4220 (async
`Layer::get_value_reconstruct_data`).
The motivation is to avoid locking `Tenant::timelines` in places that
can't be `async`, because in #4333 we want to convert Tenant::timelines
from `std::sync::Mutex` to `tokio::sync::Mutex`.
But, the changes here are useful in general because they clean up &
document tenant state transitions.
That also paves the way for #4350, which is an alternative to #4333 that
refactors the pageserver code so that we can keep the
`Tenant::timelines` mutex sync.
This patch consists of the following core insights and changes:
* spawn_load and spawn_attach own the tenant state until they're done
* once load()/attach() calls are done ...
* if they failed, transition them to Broken directly (we know that
there's no background activity because we didn't call activate yet)
* if they succeed, call activate. We can make it infallible. How? Later.
* set_broken() and set_stopping() are changed to wait for spawn_load() /
spawn_attach() to finish.
* This sounds scary because it might hinder detach or shutdown, but
actually, concurrent attach+detach, or attach+shutdown, or
load+shutdown, or attach+shutdown were just racy before this PR.
So, with this change, they're not anymore.
In the future, we can add a `CancellationToken` stored in Tenant to
cancel `load` and `attach` faster, i.e., make `spawn_load` /
`spawn_attach` transition them to Broken state sooner.
See the doc comments on TenantState for the state transitions that are
now possible.
It might seem scary, but actually, this patch reduces the possible state
transitions.
We introduce a new state `TenantState::Activating` to avoid grabbing the
`Tenant::timelines` lock inside the `send_modify` closure.
These were the humble beginnings of this PR (see Motivation section),
and I think it's still the right thing to have this `Activating` state,
even if we decide against async `Tenant::timelines` mutex. The reason is
that `send_modify` locks internally, and by moving locking of
Tenant::timelines out of the closure, the internal locking of
`send_modify` becomes a leaf of the lock graph, and so, we eliminate
deadlock risk.
Co-authored-by: Joonas Koivunen <joonas@neon.tech>
We used to generate the ID, if the caller didn't specify it. That's bad
practice, however, because network is never fully reliable, so it's
possible we create a new tenant but the caller doesn't know about it,
and because it doesn't know the tenant ID, it has no way of retrying or
checking if it succeeded. To discourage that, make it mandatory. The web
control plane has not relied on the auto-generation for a long time.
This PR enforces that the tenant create / update-config APIs reject
requests with unknown fields.
This is a desirable property because some tenant config settings control
the lifetime of user data (e.g., GC horizon or PITR interval).
Suppose we inadvertently rename the `pitr_interval` field in the Rust
code.
Then, right now, a client that still uses the old name will send a
tenant config request to configure a new PITR interval.
Before this PR, we would accept such a request, ignore the old name
field, and use the pageserver.toml default value for what the new PITR
interval is.
With this PR, we will instead reject such a request.
One might argue that the client could simply check whether the config it
sent has been applied, using the `/v1/tenant/.../config` endpoint.
That is correct for tenant create and update-config.
But, attach will soon [^1] grow the ability to have attach-time config
as well.
If we ignore unknown fields and fall back to global defaults in that
case, we risk data loss.
Example:
1. Default PITR in pageservers is 7 days.
2. Create a tenant and set its PITR to 30 days.
3. For 30 days, fill the tenant continuously with data.
4. Detach the tenant.
5. Attach tenant.
Attach must use the 30-day PITR setting in this scenario.
If it were to fall back to the 7-day default value, we would lose 23
days of PITR capability for the tenant.
So, the PR that adds attach-time tenant config will build on the
(clunky) infrastructure added in this PR
[^1]: https://github.com/neondatabase/neon/pull/4255
Implementation Notes
====================
This could have been a simple `#[serde(deny_unknown_fields)]` but sadly,
that is documented- but silent-at-compile-time-incompatible with
`#[serde(flatten)]`. But we are still using this by adding on outer struct and use unit tests to ensure it is correct.
`neon_local tenant config` now uses the `.remove()` pattern + bail if
there are leftover config args. That's in line with what
`neon_local tenant create` does. We should dedupe that logic in a future
PR.
---------
Signed-off-by: Alex Chi <iskyzh@gmail.com>
Co-authored-by: Alex Chi <iskyzh@gmail.com>
This is prep for https://github.com/neondatabase/neon/pull/4255
[1/X] OpenAPI: share a single definition of TenantConfig
DRYs up the pageserver OpenAPI YAML's representation of
tenant config.
All the fields of tenant config are now located in a model schema
called TenantConfig.
The tenant create & config-change endpoints have separate schemas,
TenantCreateInfo and TenantConfigureArg, respectively.
These schemas inherit from TenantConfig, using allOf 1.
The tenant config-GET handler's response was previously named
TenantConfig.
It's now named TenantConfigResponse.
None of these changes affect how the request looks on the wire.
The generated Go code will change for Console because the OpenAPI code
generator maps `allOf` to a Go struct embedding.
Luckily, usage of tenant config in Console is still very lightweigt,
but that will change in the near future.
So, this is a good chance to set things straight.
The console changes are tracked in
https://github.com/neondatabase/cloud/pull/5046
[2/x]: extract the tenant config parts of create & config requests
[3/x]: code movement: move TenantConfigRequestConfig next to
TenantCreateRequestConfig
[4/x] type-alias TenantConfigRequestConfig = TenantCreateRequestConfig;
They are exactly the same.
[5/x] switch to qualified use for tenant create/config request api
models
[6/x] rename models::TenantConfig{RequestConfig,} and remove the alias
[7/x] OpenAPI: sync tenant create & configure body names from Rust code
[8/x]: dedupe the two TryFrom<...> for TenantConfOpt impls
The only difference is that the TenantConfigRequest impl does
```
tenant_conf.max_lsn_wal_lag = request_data.max_lsn_wal_lag;
tenant_conf.trace_read_requests = request_data.trace_read_requests;
```
and the TenantCreateRequest impl does
```
if let Some(max_lsn_wal_lag) = request_data.max_lsn_wal_lag {
tenant_conf.max_lsn_wal_lag = Some(max_lsn_wal_lag);
}
if let Some(trace_read_requests) = request_data.trace_read_requests {
tenant_conf.trace_read_requests = Some(trace_read_requests);
}
```
As far as I can tell, these are identical.
Control Plane currently [^1] polls for `has_in_progress_downloads ==
false` after /attach to determine that an attach operation succeeded.
As pointed out in the OpenAPI spec as of neon#4151, polling for
`has_in_progress_downloads` is incorrect.
This patch changes the situation by
- removing `has_in_progress_downloads`
- adding a new field `attachment_status.`
- changing instructions for `/attach` to poll for `attachment_status ==
attached`.
This makes the instructions in `/attach` actionable for Control Plane.
NB that we don't expose the TenantState in the OpenAPI docs, even though
we expose it in the endpoint. That is with good reason because we don't
want to commit to a fixed set of tenant states forever. Hence, the
separate `attachment_status` field that exposes the bare minimum
required to make /attach + subsequent polling 100% safe wrt split brain.
It would have been nice to report failures explicitly, but the problem
is that we lose that state when we restart. So, we return `attached`
upon attach failure. The tenant is Broken in that case, causing Control
Plane's subsequent health check will fail. Control Plane can roll back
the relocation operation then.
NB: the reliance on the subsequent health check is no change to what we
had before this patch!
NB: we can always add additional TenantAttachmentStatus'es in the future
to communicate failure.
This PR also moves the attach-marker file's creation to the API
handler's synchronous part. That was done to avoid the need to
distinguish
* `Attaching but marker not yet written => AttachmentStatus::Maybe` from
* `Attaching, marker written, but attach failed for other reason =>
AttachmentStatus::Attached`
Coincidentally, this also adds more transactionality to the /attach API
because we only return 202 once we've written the marker file. But, in
the end, it doesn't affect how the control plane interacts with us or
how it needs to do retries. So, we don't mention any of this in the API
docs.
[^1]: The one-click tenant relocation PR cloud#4740, currently WIP, is
the first real user.
Before this patch, if a tenant would override its eviction_policy
setting to use a lower LayerAccessThreshold::threshold than the
`evictions_low_residence_duration_metric_threshold`, the evictions done
for that tenant would count towards the
`evictions_with_low_residence_duration` metric.
That metric is used to identify pre-mature evictions, commonly triggered
by disk-usage-based eviction under disk pressure.
We don't want that to happen for the legitimate evictions of the tenant
that overrides its eviction_policy.
So, this patch
- moves the setting into TenantConf
- adds test coverage
- updates the staging & prod yamls
Forward Compatibility:
Software before this patch will ignore the new tenant conf field and use
the global one instead.
So we can roll back safely.
Backward Compatibility:
Parsing old configs with software as of this patch will fail in
`PageServerConf::parse_and_validate` with error
`unrecognized pageserver option 'evictions_low_residence_duration_metric_threshold'`
if the option is still present in the global section.
We deal with this by updating the configs in Ansible.
fixes https://github.com/neondatabase/neon/issues/3940
Reason and backtrace are added to the Broken state. Backtrace is automatically collected when tenant entered the broken state. The format for API, CLI and metrics is changed and unified to return tenant state name in camel case. Previously snake case was used for metrics and camel case was used for everything else. Now tenant state field in TenantInfo swagger spec is changed to contain state name in "slug" field and other fields (currently only reason and backtrace for Broken variant in "data" field). To allow for this breaking change state was removed from TenantInfo swagger spec because it was not used anywhere.
Please note that the tenant's broken reason is not persisted on disk so the reason is lost when pageserver is restarted.
Requires changes to grafana dashboard that monitors tenant states.
Closes#3001
---------
Co-authored-by: theirix <theirix@gmail.com>
This patch adds a pageserver-global background loop that evicts layers
in response to a shortage of available bytes in the $repo/tenants
directory's filesystem.
The loop runs periodically at a configurable `period`.
Each loop iteration uses `statvfs` to determine filesystem-level space
usage. It compares the returned usage data against two different types
of thresholds. The iteration tries to evict layers until app-internal
accounting says we should be below the thresholds. We cross-check this
internal accounting with the real world by making another `statvfs` at
the end of the iteration. We're good if that second statvfs shows that
we're _actually_ below the configured thresholds. If we're still above
one or more thresholds, we emit a warning log message, leaving it to the
operator to investigate further.
There are two thresholds:
- `max_usage_pct` is the relative available space, expressed in percent
of the total filesystem space. If the actual usage is higher, the
threshold is exceeded.
- `min_avail_bytes` is the absolute available space in bytes. If the
actual usage is lower, the threshold is exceeded.
The iteration evicts layers in LRU fashion with a reservation of up to
`tenant_min_resident_size` bytes of the most recent layers per tenant.
The layers not part of the per-tenant reservation are evicted
least-recently-used first until we're below all thresholds. The
`tenant_min_resident_size` can be overridden per tenant as
`min_resident_size_override` (bytes).
In addition to the loop, there is also an HTTP endpoint to perform one
loop iteration synchronous to the request. The endpoint takes an
absolute number of bytes that the iteration needs to evict before
pressure is relieved. The tests use this endpoint, which is a great
simplification over setting up loopback-mounts in the tests, which would
be required to test the statvfs part of the implementation. We will rely
on manual testing in staging to test the statvfs parts.
The HTTP endpoint is also handy in emergencies where an operator wants
the pageserver to evict a given amount of space _now. Hence, it's
arguments documented in openapi_spec.yml. The response type isn't
documented though because we don't consider it stable. The endpoint
should _not_ be used by Console but it could be used by on-call.
Co-authored-by: Joonas Koivunen <joonas@neon.tech>
Co-authored-by: Dmitry Rodionov <dmitry@neon.tech>
Co-authored-by: Heikki Linnakangas <heikki@neon.tech>
