This makes it possible for the compiler to validate that a match block
matched all PostgreSQL versions we support.
## Problem
We did not have a complete picture about which places we had to test
against PG versions, and what format these versions were: The full PG
version ID format (Major/minor/bugfix `MMmmbb`) as transfered in
protocol messages, or only the Major release version (`MM`). This meant
type confusion was rampant.
With this change, it becomes easier to develop new version-dependent
features, by making type and niche confusion impossible.
## Summary of changes
Every use of `pg_version` is now typed as either `PgVersionId` (u32,
valued in decimal `MMmmbb`) or PgMajorVersion (an enum, with a value for
every major version we support, serialized and stored like a u32 with
the value of that major version)
---------
Co-authored-by: Arpad Müller <arpad-m@users.noreply.github.com>
The 1.88.0 stable release is near (this Thursday). We'd like to fix most
warnings beforehand so that the compiler upgrade doesn't require
approval from too many teams.
This is therefore a preparation PR (like similar PRs before it).
There is a lot of changes for this release, mostly because the
`uninlined_format_args` lint has been added to the `style` lint group.
One can read more about the lint
[here](https://rust-lang.github.io/rust-clippy/master/#/uninlined_format_args).
The PR is the result of `cargo +beta clippy --fix` and `cargo fmt`. One
remaining warning is left for the proxy team.
---------
Co-authored-by: Conrad Ludgate <conrad@neon.tech>
Migrates the remaining crates to edition 2024. We like to stay on the
latest edition if possible. There is no functional changes, however some
code changes had to be done to accommodate the edition's breaking
changes.
Like the previous migration PRs, this is comprised of three commits:
* the first does the edition update and makes `cargo check`/`cargo
clippy` pass. we had to update bindgen to make its output [satisfy the
requirements of edition
2024](https://doc.rust-lang.org/edition-guide/rust-2024/unsafe-extern.html)
* the second commit does a `cargo fmt` for the new style edition.
* the third commit reorders imports as a one-off change. As before, it
is entirely optional.
Part of #10918
Verbosity in this case is good when reading the code. Short options are
better when operating in an interactive shell.
Signed-off-by: Tristan Partin <tristan@neon.tech>
This adds preliminary PG17 support to Neon, based on RC1 / 2024-09-04
07b828e9d4
NOTICE: The data produced by the included version of the PostgreSQL fork
may not be compatible with the future full release of PostgreSQL 17 due to
expected or unexpected future changes in magic numbers and internals.
DO NOT EXPECT DATA IN V17-TENANTS TO BE COMPATIBLE WITH THE 17.0
RELEASE!
Co-authored-by: Anastasia Lubennikova <anastasia@neon.tech>
Co-authored-by: Alexander Bayandin <alexander@neon.tech>
Co-authored-by: Konstantin Knizhnik <knizhnik@neon.tech>
Co-authored-by: Heikki Linnakangas <heikki@neon.tech>
This removes workspace hack from all libs, not from any binaries. This
does not change the behaviour of the hack.
Running
```
cargo clean
cargo build --release --bin proxy
```
Before this change took 5m16s. After this change took 3m3s. This is
because this allows the build to be parallelisable much more.
Whenever we see an XLOG_MULTIXACT_CREATE_ID WAL record, we need to
update the nextMulti and NextMultiOffset fields in the pageserver's
copy of the CheckPoint struct, to cover the new multi-XID. In
PostgreSQL, this is done by updating an in-memory struct during WAL
replay, but because in Neon you can start a compute node at any LSN,
we need to have an up-to-date value pre-calculated in the pageserver
at all times. We do the same for nextXid.
However, we had a bug in WAL ingestion code that does that: the
multi-XIDs will wrap around at 2^32, just like XIDs, so we need to do
the comparisons in a wraparound-aware fashion.
Fix that, and add tests.
Fixes issue #6520
Co-authored-by: Konstantin Knizhnik <knizhnik@neon.tech>
The comment says that this checks if there's enough space on the page
for logical message *and* an XLOG_SWITCH. So the sizes of the logical
message and the XLOG_SWITCH record should be added together, not
subtracted.
I saw a panic in the test that led me to investigate and notice this
(https://neon-github-public-dev.s3.amazonaws.com/reports/pr-7803/9142396223/index.html):
RuntimeError: Run ['/tmp/neon/bin/wal_craft', 'in-existing', 'last_wal_record_xlog_switch_ends_on_page_boundary', "host=localhost port=16165 user=cloud_admin dbname=postgres options='-cstatement_timeout=120s '"] failed:
stdout:
stderr:
thread 'main' panicked at libs/postgres_ffi/wal_craft/src/lib.rs:370:27:
attempt to subtract with overflow
stack backtrace:
0: rust_begin_unwind
at /rustc/9b00956e56009bab2aa15d7bff10916599e3d6d6/library/std/src/panicking.rs:645:5
1: core::panicking::panic_fmt
at /rustc/9b00956e56009bab2aa15d7bff10916599e3d6d6/library/core/src/panicking.rs:72:14
2: core::panicking::panic
at /rustc/9b00956e56009bab2aa15d7bff10916599e3d6d6/library/core/src/panicking.rs:145:5
3: <wal_craft::LastWalRecordXlogSwitchEndsOnPageBoundary as wal_craft::Crafter>::craft::<postgres::client::Client>
at libs/postgres_ffi/wal_craft/src/lib.rs:370:27
4: wal_craft::main::{closure#0}
at libs/postgres_ffi/wal_craft/src/bin/wal_craft.rs:21:17
5: wal_craft::main
at libs/postgres_ffi/wal_craft/src/bin/wal_craft.rs:66:47
6: <fn() -> core::result::Result<(), anyhow::Error> as core::ops::function::FnOnce<()>>::call_once
at /rustc/9b00956e56009bab2aa15d7bff10916599e3d6d6/library/core/src/ops/function.rs:250:5
note: Some details are omitted, run with `RUST_BACKTRACE=full` for a verbose backtrace.
There were two issues with the test at page boundaries:
1. If the first logical message with 10 bytes payload crossed a page
boundary, the calculated 'base_size' was too large because it included
the page header.
2. If it was inserted near the end of a page so that there was not
enough room for another one, we did "remaining_lsn += XLOG_BLCKSZ" but
that didn't take into account the page headers either.
As a result, the test would fail if the WAL insert position at the
beginning of the test was too close to the end of a WAL page. Fix the
calculations by repeating the 10-byte logical message if the starting
position is not suitable.
I bumped into this with PR #7377; it changed the arguments of a few SQL
functions in neon_test_utils extension, which changed the WAL positions
slightly, and caused a test failure.
This is similar to https://github.com/neondatabase/neon/pull/7436, but
for different test.
As noted in the comment, the craft_internal() function fails if the
inserted WAL happens to land at page boundary. I bumped into that with
PR #7377; it changed the arguments of a few SQL functions in
neon_test_utils extension, which changed the WAL positions slightly, and
caused a test failure.
Postgres can always write some more WAL, so previous checks that WAL doesn't
change after something had been crafted were wrong; remove them. Add comments
here and there.
should fix https://github.com/neondatabase/neon/issues/4691
## Problem
Neon doesn't compile on nightly and had numerous clippy complaints.
## Summary of changes
1. Fixed troublesome dependency
2. Fixed or ignored the lints where appropriate
Fixes#4689 by replacing all of `std::Path` , `std::PathBuf` with
`camino::Utf8Path`, `camino::Utf8PathBuf` in
- pageserver
- safekeeper
- control_plane
- libs/remote_storage
Co-authored-by: Joonas Koivunen <joonas@neon.tech>
This adds PostgreSQL 16 as a vendored postgresql version, and adapts the
code to support this version.
The important changes to PostgreSQL 16 compared to the PostgreSQL 15
changeset include the addition of a neon_rmgr instead of altering Postgres's
original WAL format.
Co-authored-by: Alexander Bayandin <alexander@neon.tech>
Co-authored-by: Heikki Linnakangas <heikki@neon.tech>
## Problem
close https://github.com/neondatabase/neon/issues/4266
## Summary of changes
With this PR, rust-analyzer should be able to give lints and auto
complete in `mod tests`, and this makes writing tests easier.
Previously, rust-analyzer cannot do auto completion.
---------
Signed-off-by: Alex Chi <iskyzh@gmail.com>
wal_craft had accumulated some trouble by using `use anyhow::*;`. Fixes
that, removes redundant conversions (never need to convert a Path to
OsStr), especially at the `Process` args.
Originally in #4100 but we merged a later PR instead for the fixes. I
dropped the `postmaster.pid` polling in favor of just having a longer
connect timeout.
1.66 release speeds up compile times for over 10% according to tests.
Also its Clippy finds plenty of old nits in our code:
* useless conversion, `foo as u8` where `foo: u8` and similar, removed
`as u8` and similar
* useless references and dereferenced (that were automatically adjusted
by the compiler), removed various `&` and `*`
* bool -> u8 conversion via `if/else`, changed to `u8::from`
* Map `.iter()` calls where only values were used, changed to
`.values()` instead
Standing out lints:
* `Eq` is missing in our protoc generated structs. Silenced, does not
seem crucial for us.
* `fn default` looks like the one from `Default` trait, so I've
implemented that instead and replaced the `dummy_*` method in tests with
`::default()` invocation
* Clippy detected that
```
if retry_attempt < u32::MAX {
retry_attempt += 1;
}
```
is a saturating add and proposed to replace it.
This fixes all kinds of problems related to missing params,
like broken timestamps (due to `integer_datetimes`).
This solution is not ideal, but it will help. Meanwhile,
I'm going to dedicate some time to improving connection machinery.
Note that this **does not** fix problems with passing certain parameters
in a reverse direction, i.e. **from client to compute**. This is a
separate matter and will be dealt with in an upcoming PR.
Another preparatory commit for pg15 support:
* generate bindings for both pg14 and pg15;
* update Makefile and CI scripts: now neon build depends on both PostgreSQL versions;
* some code refactoring to decrease version-specific dependencies.
* Add submodule postgres-15
* Support pg_15 in pgxn/neon
* Renamed zenith -> neon in Makefile
* fix name of codestyle check
* Refactor build system to prepare for building multiple Postgres versions.
Rename "vendor/postgres" to "vendor/postgres-v14"
Change Postgres build and install directory paths to be version-specific:
- tmp_install/build -> pg_install/build/14
- tmp_install/* -> pg_install/14/*
And Makefile targets:
- "make postgres" -> "make postgres-v14"
- "make postgres-headers" -> "make postgres-v14-headers"
- etc.
Add Makefile aliases:
- "make postgres" to build "postgres-v14" and in future, "postgres-v15"
- similarly for "make postgres-headers"
Fix POSTGRES_DISTRIB_DIR path in pytest scripts
* Make postgres version a variable in codestyle workflow
* Support vendor/postgres-v15 in codestyle check workflow
* Support postgres-v15 building in Makefile
* fix pg version in Dockerfile.compute-node
* fix kaniko path
* Build neon extensions in version-specific directories
* fix obsolete mentions of vendor/postgres
* use vendor/postgres-v14 in Dockerfile.compute-node.legacy
* Use PG_VERSION_NUM to gate dependencies in inmem_smgr.c
* Use versioned ECR repositories and image names for compute-node.
The image name format is compute-node-vXX, where XX is postgres major version number.
For now only v14 is supported.
Old format unversioned name (compute-node) is left, because cloud repo depends on it.
* update vendor/postgres submodule url (zenith->neondatabase rename)
* Fix postgres path in python tests after rebase
* fix path in regress test
* Use separate dockerfiles to build compute-node:
Dockerfile.compute-node-v15 should be identical to Dockerfile.compute-node-v14 except for the version number.
This is a hack, because Kaniko doesn't support build ARGs properly
* bump vendor/postgres-v14 and vendor/postgres-v15
* Don't use Kaniko cache for v14 and v15 compute-node images
* Build compute-node images for different versions in different jobs
Co-authored-by: Heikki Linnakangas <heikki@neon.tech>
Re-export only things that are used by other modules.
In the future, I'm imagining that we run bindgen twice, for Postgres
v14 and v15. The two sets of bindings would go into separate
'bindings_v14' and 'bindings_v15' modules.
Rearrange postgres_ffi modules.
Move function, to avoid Postgres version dependency in timelines.rs
Move function to generate a logical-message WAL record to postgres_ffi.
* Deduce `last_segment` automatically
* Get rid of local `wal_dir`/`wal_seg_size` variables
* Prepare to test parsing of WAL from multiple specific points, not just the start;
extract `check_end_of_wal` function to check both partial and non-partial WAL segments.
