With a new beta build of the rust compiler, it's good to check out the
new lints. Either to find false positives, or find flaws in our code.
Additionally, it helps reduce the effort required to update to 1.85 in 6
weeks.
## Problem
Currently, the heap profiling frequency is every 1 MB allocated. Taking
a profile stack trace takes about 1 µs, and allocating 1 MB takes about
15 µs, so the overhead is about 6.7% which is a bit high. This is a
fixed cost regardless of whether heap profiles are actually accessed.
## Summary of changes
Increase the heap profiling sample frequency from 1 MB to 2 MB, which
reduces the overhead to about 3.3%. This seems acceptable, considering
performance-sensitive code will avoid allocations as far as possible
anyway.
When we moved throttling up from Timeline::get into page_service,
we stopped being sensitive to `Timeline::cancel`, even though we're
holding a Handle and thus a guard on the `Timeline::gate` open.
This PR rectifies the situation.
Refs
- Found while investigating #10309 (hung detach because gate kept open),
but not expected to be the root cause of that issue because the
affected tenants are not being throttled according to their metrics.
## Problem
Auto-offloading as requested by the compaction task is racy with
unarchival, in that the compaction task might attempt to offload an
unarchived timeline. By that point it will already have set the timeline
to the `Stopping` state however, which makes it unusable for any
purpose. For example:
1. compaction task decides to offload timeline
2. timeline gets unarchived
3. `offload_timeline` gets called by compaction task
* sets timeline's state to `Stopping`
* realizes that the timeline can't be unarchived, errors out
6. endpoint can't be started as the timeline is `Stopping` and thus
'can't be found'.
A future iteration of the compaction task can't "heal" this state either
as the timeline will still not be archived, same goes for other
automatic stuff. The only way to heal this is a tenant detach+attach, or
alternatively a pageserver restart.
Furthermore, the compaction task is especially amenable for such races
as it first stores `can_offload` into a variable, figures out whether
compaction is needed (which takes some time), and only then does it
attempt an offload operation: the time difference between "check" and
"use" is non-trivially small.
To make it even worse, we start the compaction task right after attach
of a tenant, and it is a common pattern by pageserver users to attach a
tenant to then immediately unarchive a timeline, so that an endpoint can
be started.
## Solutions not adopted
The simplest solution is to move the `can_offload` check to right before
attempting of the offload. But this is not a good solution, as no lock
is held between that check and timeline shutdown. So races would still
be possible, just become less likely.
I explored using the timeline state for this, as in adding an additional
enum variant. But `Timeline::set_state` is racy (#10297).
## Adopted solution
We use the lock on the timeline's upload queue as an arbiter: either
unarchival gets to it first and sours the state for auto-offloading, or
auto-offloading shuts it down, which stops any parallel unarchival in
its tracks. The key part is not releasing the upload queue's lock
between the check whether the timeline is archived or not, and shutting
it down (the actual implementation only sets `shutting_down` but it has
the same effect on `initialized_mut()` as a full shutdown). The rest of
the patch is stuff that follows from this.
We also move the part where we set the state to `Stopping` to after that
arbiter has decided the fate of the timeline. For deletions, we do keep
it inside `DeleteTimelineFlow::prepare` however, so that it is called
with all of the the timelines locks held that the function allocates
(timelines lock most importantly). This is only a precautionary measure
however, as I didn't want to analyze deletion related code for possible
races.
## Future changes
It might make sense to move `can_offload` to right before the offload
attempt. Maybe some other properties might have changed as well.
Although this will not be perfect either as no lock is held. I want to
keep it out of this change to emphasize that this move wasn't the main
reason we are race free now.
Fixes#10220
## Problem
If for some reasons we already garbage-collected the data under an LSN
but the caller uses a past LSN for the find_time_cutoff function, now we
will report a missing key error and GC will never proceed.
Note that missing key error can also happen if the key is really missing
(i.e., during the past offload incidents)
## Summary of changes
Make sure GC proceeds by bumping the LSN. When time_cutoff=None, we will
not increase the time_cutoff (it will be set to latest_gc_cutoff). If we
really need to bump the GC LSN for maintenance purpose, we need a
separate API to do that.
Signed-off-by: Alex Chi Z <chi@neon.tech>
## Problem
We have several serious data corruption incidents caused by mismatch of
get-age requests:
https://neondb.slack.com/archives/C07FJS4QF7V/p1723032720164359
We hope that the problem is fixed now. But it is better to prevent such
kind of problems in future.
Part of https://github.com/neondatabase/cloud/issues/16472
## Summary of changes
This PR introduce new V3 version of compute<->pageserver protocol,
adding tag to getpage response.
So now compute is able to check if it really gets response to the
requested page.
## Checklist before requesting a review
- [ ] I have performed a self-review of my code.
- [ ] If it is a core feature, I have added thorough tests.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [ ] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
## Checklist before merging
- [ ] Do not forget to reformat commit message to not include the above
checklist
---------
Co-authored-by: Konstantin Knizhnik <knizhnik@neon.tech>
Co-authored-by: Heikki Linnakangas <heikki@neon.tech>
## Problem
The filtered record metric doesn't make sense for interpreted ingest.
## Summary of changes
While of dubious utility in the first place, this patch replaces them
with records received and records observed metrics for interpreted
ingest:
* received records cause the pageserver to do _something_: write a key,
value pair to storage, update some metadata or flush pending
modifications
* observed records are a shard 0 concept and contain only key metadata
used in tracking relation sizes (received records include observed
records)
## Problem
close https://github.com/neondatabase/neon/issues/10192
## Summary of changes
* `find_gc_time_cutoff` takes `now` parameter so that all branches
compute the cutoff based on the same start time, avoiding races.
* gc-compaction uses a single `get_gc_compaction_watermark` function to
get the safe LSN to compact.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
Co-authored-by: Arpad Müller <arpad-m@users.noreply.github.com>
## Problem
It's not legal to modify layers that are referenced by the current layer
index. Assert this in the upload queue, as preparation for upload queue
reordering.
Touches #10096.
## Summary of changes
Add a debug assertion that the upload queue does not modify layers
referenced by the current index.
I could be convinced that this should be a plain assertion, but will be
conservative for now.
## Problem
Since enabling continuous profiling in staging, we've seen frequent seg
faults. This is suspected to be because jemalloc and pprof-rs take a
stack trace at the same time, and the handlers aren't signal safe.
jemalloc does this probabilistically on every allocation, regardless of
whether someone is taking a heap profile, which means that any CPU
profile has a chance to cause a seg fault.
Touches #10225.
## Summary of changes
For now, just disable heap profiles -- CPU profiles are more important,
and we need to be able to take them without risking a crash.
There is a race condition between `Tenant::shutdown`'s `defuse_for_drop`
loop and `offload_timeline`, where timeline offloading can insert into a
tenant that is in the process of shutting down, in fact so far
progressed that the `defuse_for_drop` has already been called.
This prevents warn log lines of the form:
```
offloaded timeline <hash> was dropped without having cleaned it up at the ancestor
```
The solution piggybacks on the `offloaded_timelines` lock: both the
defuse loop and the offloaded timeline insertion need to acquire the
lock, and we know that the defuse loop only runs after the tenant has
set its `TenantState` to `Stopping`.
So if we hold the `offloaded_timelines` lock, and know that the
`TenantState` is not `Stopping`, then we know that the defuse loop has
not ran yet, and holding the lock ensures that it doesn't start running
while we are inserting the offloaded timeline.
Fixes#10070
## Problem
In https://github.com/neondatabase/neon/pull/9897 we temporarily
disabled the layer valid check because the current one only considers
the end result of all compaction algorithms, but partial gc-compaction
would temporarily produce an "invalid" layer map.
part of https://github.com/neondatabase/neon/issues/9114
## Summary of changes
Allow LSN splits to overlap in the slow path check. Currently, the valid
check is only used in storage scrubber (background job) and during
gc-compaction (without taking layer lock). Therefore, it's fine for such
checks to be a little bit inefficient but more accurate.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
Co-authored-by: Arpad Müller <arpad-m@users.noreply.github.com>
## Problem
We cannot get the size of the compaction queue and access the info.
Part of #9114
## Summary of changes
* Add an API endpoint to get the compaction queue.
* gc_compaction test case now waits until the compaction finishes.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
## Problem
part of https://github.com/neondatabase/neon/issues/9114
In https://github.com/neondatabase/neon/pull/10127 we fixed the race,
but we didn't add the errors to the allowlist.
## Summary of changes
* Allow repartition errors in the gc-compaction smoke test.
I think it might be worth to refactor the code to allow multiple threads
getting a copy of repartition status (i.e., using Rcu) in the future.
Signed-off-by: Alex Chi Z <chi@neon.tech>
## Problem
Changes in #9786 were functionally complete but missed some edges that
made testing less robust than it should have been:
- `is_key_disposable` didn't consider SLRU dir keys disposable
- Timeline `init_empty` was always creating SLRU dir keys on all shards
The result was that when we had a bug
(https://github.com/neondatabase/neon/pull/10080), it wasn't apparent in
tests, because one would only encounter the issue if running on a
long-lived timeline with enough compaction to drop the initially created
empty SLRU dir keys, _and_ some CLog truncation going on.
Closes: https://github.com/neondatabase/cloud/issues/21516
## Summary of changes
- Update is_key_global and init_empty to handle SLRU dir keys properly
-- the only functional impact is that we avoid writing some spurious
keys in shards >0, but this makes testing much more robust.
- Make `test_clog_truncate` explicitly use a sharded tenant
The net result is that if one reverts #10080, then tests fail (i.e. this
PR is a reproducer for the issue)
## Problem
In #8550, we made the flush loop wait for uploads after every layer.
This was to avoid unbounded buildup of uploads, and to reduce compaction
debt. However, the approach has several problems:
* It prevents upload parallelism.
* It prevents flush and upload pipelining.
* It slows down ingestion even when there is no need to backpressure.
* It does not directly backpressure WAL ingestion (only via
`disk_consistent_lsn`), and will build up in-memory layers.
* It does not directly backpressure based on compaction debt and read
amplification.
An alternative solution to these problems is proposed in #8390.
In the meanwhile, we revert the change to reduce the impact on ingest
throughput. This does reintroduce some risk of unbounded
upload/compaction buildup. Until
https://github.com/neondatabase/neon/issues/8390, this can be addressed
in other ways:
* Use `max_replication_apply_lag` (aka `remote_consistent_lsn`), which
will more directly limit upload debt.
* Shard the tenant, which will spread the flush/upload work across more
Pageservers and move the bottleneck to Safekeeper.
Touches #10095.
## Summary of changes
Remove waiting on the upload queue in the flush loop.
## Problem
close https://github.com/neondatabase/neon/issues/10124
gc-compaction split_gc_jobs is holding the repartition lock for too long
time.
## Summary of changes
* Ensure split_gc_compaction_jobs drops the repartition lock once it
finishes cloning the structures.
* Update comments.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
## Problem
Cplane and storage controller tenant config changes are not additive.
Any change overrides all existing tenant configs. This would be fine if
both did client side patching, but that's not the case.
Once this merges, we must update cplane to use the PATCH endpoint.
## Summary of changes
### High Level
Allow for patching of tenant configuration with a `PATCH
/v1/tenant/config` endpoint.
It takes the same data as it's PUT counterpart. For example the payload
below will update `gc_period` and unset `compaction_period`. All other
fields are left in their original state.
```
{
"tenant_id": "1234",
"gc_period": "10s",
"compaction_period": null
}
```
### Low Level
* PS and storcon gain `PATCH /v1/tenant/config` endpoints. PS endpoint
is only used for cplane managed instances.
* `storcon_cli` is updated to have separate commands for
`set-tenant-config` and `patch-tenant-config`
Related https://github.com/neondatabase/cloud/issues/21043
## Problem
We get slru truncation commands on non-zero shards.
Compaction will drop the slru dir keys and ingest will fail when
receiving such records.
https://github.com/neondatabase/neon/pull/10080 fixed it for clog, but
not for multixact.
## Summary of changes
Only truncate multixact slrus on shard zero. I audited the rest of the
ingest code and it looks
fine from this pov.
## Problem
With pipelining enabled, the time a request spends in the batcher stage
counts towards the smgr op latency.
If pipelining is disabled, that time is not accounted for.
In practice, this results in a jump in smgr getpage latencies in various
dashboards and degrades the internal SLO.
## Solution
In a similar vein to #10042 and with a similar rationale, this PR stops
counting the time spent in batcher stage towards smgr op latency.
The smgr op latency metric is reduced to the actual execution time.
Time spent in batcher stage is tracked in a separate histogram.
I expect to remove that histogram after batching rollout is complete,
but it will be helpful in the meantime to reason about the rollout.
## Problem
In #9786 we stop storing SLRUs on non-zero shards.
However, there was one code path during ingest that still tries to
enumerate SLRU relations on all shards. This fails if it sees a tenant
who has never seen any write to an SLRU, or who has done such thorough
compaction+GC that it has dropped its SLRU directory key.
## Summary of changes
- Avoid trying to list SLRU relations on nonzero shards
## Problem
close https://github.com/neondatabase/cloud/issues/19671
```
Timeline -----------------------------
^ last GC happened LSN
^ original retention period setting = 24hr
> refresh-gc-info updates the gc_info
^ planned cutoff (gc_info)
^ customer set retention to 48hr, and it's still within the last GC LSN
^1 ^2 we have two choices: (1) update the planned cutoff to
move backwards, or (2) keep the current one
```
In this patch, we decided to keep the current cutoff instead of moving
back the gc_info to avoid races. In the future, we could allow the
planned gc cutoff to go back once cplane sends a retention_history
tenant config update, but this requires a careful revisit of the code.
## Summary of changes
Ensure that GC cutoffs never go back if retention settings get changed.
Signed-off-by: Alex Chi Z <chi@neon.tech>
Azure has a different per-request limit of 256 items for bulk deletion
compared to the number of 1000 on AWS. Therefore, we need to support
multiple values. Due to `GenericRemoteStorage`, we can't add an
associated constant, but it has to be a function.
The PR replaces the `MAX_KEYS_PER_DELETE` constant with a function of
the same name, implemented on both the `RemoteStorage` trait as well as
on `GenericRemoteStorage`.
The value serves as hint of how many objects to pass to the
`delete_objects` function.
Reading:
* https://learn.microsoft.com/en-us/rest/api/storageservices/blob-batch
* https://docs.aws.amazon.com/AmazonS3/latest/API/API_DeleteObjects.html
Part of #7931
## Problem
close https://github.com/neondatabase/neon/issues/10049, close
https://github.com/neondatabase/neon/issues/10030, close
https://github.com/neondatabase/neon/issues/8861
part of https://github.com/neondatabase/neon/issues/9114
The legacy gc process calls `get_latest_gc_cutoff`, which uses a Rcu
different than the gc_info struct. In the gc_compaction_smoke test case,
the "latest" cutoff could be lower than the gc_info struct, causing
gc-compaction to collect data that could be accessed by
`latest_gc_cutoff`. Technically speaking, there's nothing wrong with
gc-compaction using gc_info without considering latest_gc_cutoff,
because gc_info is the source of truth. But anyways, let's fix it.
## Summary of changes
* gc-compaction uses `latest_gc_cutoff` instead of gc_info to determine
the gc horizon.
* if a gc-compaction is scheduled via tenant compaction iteration, it
will take the gc_block lock to avoid racing with functionalities like
detach ancestor (if it's triggered via manual compaction API without
scheduling, then it won't take the lock)
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
Co-authored-by: Arpad Müller <arpad-m@users.noreply.github.com>
## Problem
In #9962 I changed the smgr metrics to include time spent on flush.
It isn't under our (=storage team's) control how long that flush takes
because the client can stop reading requests.
## Summary of changes
Stop the timer as soon as we've buffered up the response in the
`pgb_writer`.
Track flush time in a separate metric.
---------
Co-authored-by: Yuchen Liang <70461588+yliang412@users.noreply.github.com>
## Problem
part of https://github.com/neondatabase/neon/issues/9114, stacked PR
over #9809
The compaction scheduler now schedules partial compaction jobs.
## Summary of changes
* Add the compaction job splitter based on size.
* Schedule subcompactions using the compaction scheduler.
* Test subcompaction scheduler in the smoke regress test.
* Temporarily disable layer map checks
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
## Problem
With the current metrics we can't identify which shards are ingesting
data at any given time.
## Summary of changes
Add a metric for the number of wal records received for processing by
each shard. This is per (tenant, timeline, shard).
We've seen cases where stray keys end up on the wrong shard. This
shouldn't happen. Add debug assertions to prevent this. In release
builds, we should be lenient in order to handle changing key ownership
policies.
Touches #9914.
## Problem
There's no metrics for disk consistent LSN and remote LSN. This stuff is
useful when looking at ingest performance.
## Summary of changes
Two per timeline metrics are added: `pageserver_disk_consistent_lsn` and
`pageserver_projected_remote_consistent_lsn`. I went for the projected
remote lsn instead of the visible one
because that more closely matches remote storage write tput. Ideally we
would have both, but these metrics are expensive.
## Problem
I'm writing an ingest benchmark in #9812. To time S3 uploads, I need to
schedule a flush of the Pageserver's in-memory layer, but don't actually
want to wait around for it to complete (which will take a minute).
## Summary of changes
Add a parameter `wait_until_flush` (default `true`) for
`timeline/checkpoint` to control whether to wait for the flush to
complete.
## Problem
FSM pages are managed like regular relation pages, and owned by a single
shard. However, when truncating the FSM relation the last FSM page was
zeroed out on all shards. This is unnecessary and potentially confusing.
The superfluous keys will be removed during compactions, as they do not
belong on these shards.
Resolves#10027.
## Summary of changes
Only zero out the truncated FSM page on the owning shard.
## Problem
part of https://github.com/neondatabase/neon/issues/9114
gc-compaction can take a long time. This patch adds support for
scheduling a gc-compaction job. The compaction loop will first handle
L0->L1 compaction, and then gc compaction. The scheduled jobs are stored
in a non-persistent queue within the tenant structure.
This will be the building block for the partial compaction trigger -- if
the system determines that we need to do a gc compaction, it will
partition the keyspace and schedule several jobs. Each of these jobs
will run for a short amount of time (i.e, 1 min). L0 compaction will be
prioritized over gc compaction.
## Summary of changes
* Add compaction scheduler in tenant.
* Run scheduled compaction in integration tests.
* Change the manual compaction API to allow schedule a compaction
instead of immediately doing it.
* Add LSN upper bound as gc-compaction parameter. If we schedule partial
compactions, gc_cutoff might move across different runs. Therefore, we
need to pass a pre-determined gc_cutoff beforehand. (TODO: support LSN
lower bound so that we can compact arbitrary "rectangle" in the layer
map)
* Refactor the gc_compaction internal interface.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
Co-authored-by: Christian Schwarz <christian@neon.tech>
Closes#9387.
## Problem
`BufferedWriter` cannot proceed while the owned buffer is flushing to
disk. We want to implement double buffering so that the flush can happen
in the background. See #9387.
## Summary of changes
- Maintain two owned buffers in `BufferedWriter`.
- The writer is in charge of copying the data into owned, aligned
buffer, once full, submit it to the flush task.
- The flush background task is in charge of flushing the owned buffer to
disk, and returned the buffer to the writer for reuse.
- The writer and the flush background task communicate through a
bi-directional channel.
For in-memory layer, we also need to be able to read from the buffered
writer in `get_values_reconstruct_data`. To handle this case, we did the
following
- Use replace `VirtualFile::write_all` with `VirtualFile::write_all_at`,
and use `Arc` to share it between writer and background task.
- leverage `IoBufferMut::freeze` to get a cheaply clonable `IoBuffer`,
one clone will be submitted to the channel, the other clone will be
saved within the writer to serve reads. When we want to reuse the
buffer, we can invoke `IoBuffer::into_mut`, which gives us back the
mutable aligned buffer.
- InMemoryLayer reads is now aware of the maybe_flushed part of the
buffer.
**Caveat**
- We removed the owned version of write, because this interface does not
work well with buffer alignment. The result is that without direct IO
enabled,
[`download_object`](a439d57050/pageserver/src/tenant/remote_timeline_client/download.rs (L243))
does one more memcpy than before this PR due to the switch to use
`_borrowed` version of the write.
- "Bypass aligned part of write" could be implemented later to avoid
large amount of memcpy.
**Testing**
- use an oneshot channel based control mechanism to make flush behavior
deterministic in test.
- test reading from `EphemeralFile` when the last submitted buffer is
not flushed, in-progress, and done flushing to disk.
## Performance
We see performance improvement for small values, and regression on big
values, likely due to being CPU bound + disk write latency.
[Results](https://www.notion.so/neondatabase/Benchmarking-New-BufferedWriter-11-20-2024-143f189e0047805ba99acda89f984d51?pvs=4)
## Checklist before requesting a review
- [ ] I have performed a self-review of my code.
- [ ] If it is a core feature, I have added thorough tests.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [ ] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
## Checklist before merging
- [ ] Do not forget to reformat commit message to not include the above
checklist
---------
Signed-off-by: Yuchen Liang <yuchen@neon.tech>
Co-authored-by: Christian Schwarz <christian@neon.tech>
## Problem
Reqwest errors don't include details about the inner source error. This
means that we get opaque errors like:
```
receive body: error sending request for url (http://localhost:9898/v1/location_config)
```
Instead of the more helpful:
```
receive body: error sending request for url (http://localhost:9898/v1/location_config): operation timed out
```
Touches #9801.
## Summary of changes
Include the source error for `reqwest::Error` wherever it's displayed.
## Problem
During deploys, we see a lot of 500 errors due to heapmap uploads for
inactive tenants. These should be 503s instead.
Resolves#9574.
## Summary of changes
Make the secondary tenant scheduler use `ApiError` rather than
`anyhow::Error`, to propagate the tenant error and convert it to an
appropriate status code.
Support tenant manifests in the storage scrubber:
* list the manifests, order them by generation
* delete all manifests except for the two most recent generations
* for the latest manifest: try parsing it.
I've tested this patch by running the against a staging bucket and it
successfully deleted stuff (and avoided deleting the latest two
generations).
In follow-up work, we might want to also check some invariants of the
manifest, as mentioned in #8088.
Part of #9386
Part of #8088
---------
Co-authored-by: Christian Schwarz <christian@neon.tech>
## Problem
The Pageserver signal handler would only respond to a single signal and
initiate shutdown. Subsequent signals were ignored. This meant that a
`SIGQUIT` sent after a `SIGTERM` had no effect (e.g. in the case of a
slow or stalled shutdown). The `test_runner` uses this to force shutdown
if graceful shutdown is slow.
Touches #9740.
## Summary of changes
Keep responding to signals after the initial shutdown signal has been
received.
Arguably, the `test_runner` should also use `SIGKILL` rather than
`SIGQUIT` in this case, but it seems reasonable to respond to `SIGQUIT`
regardless.
## Problem
We saw a peculiar case where a pageserver apparently got a 0-tenant
response to `/re-attach` but we couldn't see the request landing on a
storage controller. It was hard to confirm retrospectively that the
pageserver was configured properly at the moment it sent the request.
## Summary of changes
- Log the URL to which we are sending the request
- Log the NodeId and metadata that we sent
## Problem
In the batching PR
- https://github.com/neondatabase/neon/pull/9870
I stopped deducting the time-spent-in-throttle fro latency metrics,
i.e.,
- smgr latency metrics (`SmgrOpTimer`)
- basebackup latency (+scan latency, which I think is part of
basebackup).
The reason for stopping the deduction was that with the introduction of
batching, the trick with tracking time-spent-in-throttle inside
RequestContext and swap-replacing it from the `impl Drop for
SmgrOpTimer` no longer worked with >1 requests in a batch.
However, deducting time-spent-in-throttle is desirable because our
internal latency SLO definition does not account for throttling.
## Summary of changes
- Redefine throttling to be a page_service pagestream request throttle
instead of a throttle for repository `Key` reads through `Timeline::get`
/ `Timeline::get_vectored`.
- This means reads done by `basebackup` are no longer subject to any
throttle.
- The throttle applies after batching, before handling of the request.
- Drive-by fix: make throttle sensitive to cancellation.
- Rename metric label `kind` from `timeline_get` to `pagestream` to
reflect the new scope of throttling.
To avoid config format breakage, we leave the config field named
`timeline_get_throttle` and ignore the `task_kinds` field.
This will be cleaned up in a future PR.
## Trade-Offs
Ideally, we would apply the throttle before reading a request off the
connection, so that we queue the minimal amount of work inside the
process.
However, that's not possible because we need to do shard routing.
The redefinition of the throttle to limit pagestream request rate
instead of repository `Key` rate comes with several downsides:
- We're no longer able to use the throttle mechanism for other other
tasks, e.g. image layer creation.
However, in practice, we never used that capability anyways.
- We no longer throttle basebackup.
