This PR adds a pageserver mgmt API to scan a layer file for disposable
keys.
It hooks it up to the sharding compaction test, demonstrating that we're
not filtering out all disposable keys.
This is extracted from PGDATA import
(https://github.com/neondatabase/neon/pull/9218)
where I do the filtering of layer files based on `is_key_disposable`.
Before, we didn't copy over the `index-part.json` of offloaded timelines
to the new shard's location, resulting in the new shard not knowing the
timeline even exists.
In #9444, we copy over the manifest, but we also need to do this for
`index-part.json`.
As the operations to do are mostly the same between offloaded and
non-offloaded timelines, we can iterate over all of them in the same
loop, after the introduction of a `TimelineOrOffloadedArcRef` type to
generalize over the two cases. This is analogous to the deletion code
added in #8907.
The added test also ensures that the sharded archival config endpoint
works, something that has not yet been ensured by tests.
Part of #8088
## Problem
We were seeing timeouts on migrations in this test.
The test unfortunately tends to saturate local storage, which is shared
between the pageservers and the control plane database, which makes the
test kind of unrealistic. We will also want to increase the scale of
this test, so it's worth fixing that.
## Summary of changes
- Instead of randomly creating timelines at the same time as the other
background operations, explicitly identify a subset of tenant which will
have timelines, and create them at the start. This avoids pageservers
putting a lot of load on the test node during the main body of the test.
- Adjust the tenants created to create some number of 8 shard tenants
and the rest 1 shard tenants, instead of just creating a lot of 2 shard
tenants.
- Use archival_config to exercise tenant-mutating operations, instead of
using timeline creation for this.
- Adjust reconcile_until_idle calls to avoid waiting 5 seconds between
calls, which causes timelines with large shard count tenants.
- Fix a pageserver bug where calls to archival_config during activation
get 404
## Problem
At MacOS `pg_dynshmem` file is create in PGDATADIR which cause mismatch
in directories comparison
## Summary of changes
Add this files to the ignore list.
## Checklist before requesting a review
- [ ] I have performed a self-review of my code.
- [ ] If it is a core feature, I have added thorough tests.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [ ] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
## Checklist before merging
- [ ] Do not forget to reformat commit message to not include the above
checklist
Co-authored-by: Konstantin Knizhnik <knizhnik@neon.tech>
## Problem
We faced the problem of incompatibility of the different components of
different versions.
This should be detected automatically to prevent production bugs.
## Summary of changes
The test for this situation was implemented
Co-authored-by: Alexander Bayandin <alexander@neon.tech>
## Problem
We need a way to incrementally switch to direct IO. During the rollout
we might want to switch to O_DIRECT on image and delta layer read path
first before others.
## Summary of changes
- Revisited and simplified direct io config in `PageserverConf`.
- We could add a fallback mode for open, but for read there isn't a
reasonable alternative (without creating another buffered virtual file).
- Added a wrapper around `VirtualFile`, current implementation become
`VirtualFileInner`
- Use `open_v2`, `create_v2`, `open_with_options_v2` when we want to use
the IO mode specified in PS config.
- Once we onboard all IO through VirtualFile using this new API, we will
delete the old code path.
- Make io mode live configurable for benchmarking.
- Only guaranteed for files opened after the config change, so do it
before the experiment.
As an example, we are using `open_v2` with
`virtual_file::IoMode::Direct` in
https://github.com/neondatabase/neon/pull/9169
We also remove `io_buffer_alignment` config in
a04cfd754b and use it as a compile time
constant. This way we don't have to carry the alignment around or make
frequent call to retrieve this information from the static variable.
Signed-off-by: Yuchen Liang <yuchen@neon.tech>
The "Starting postgres endpoint <name>" message is not needed, because
the neon_cli.py prints the neon_local command line used to start the
endpoint. That contains the same information. The "Postgres startup took
XX seconds" message is not very useful because no one pays attention to
those in the python test logs when things are going smoothly, and if you
do wonder about the startup speed, the same information and more can be
found in the compute log.
Before:
2024-10-07 22:32:27.794 INFO [neon_fixtures.py:3492] Starting postgres endpoint ep-1
2024-10-07 22:32:27.794 INFO [neon_cli.py:73] Running command "/tmp/neon/bin/neon_local endpoint start --safekeepers 1 ep-1"
2024-10-07 22:32:27.901 INFO [neon_fixtures.py:3690] Postgres startup took 0.11398935317993164 seconds
After:
2024-10-07 22:32:27.794 INFO [neon_cli.py:73] Running command "/tmp/neon/bin/neon_local endpoint start --safekeepers 1 ep-1"
It didn't serve much value, and was only used twice.
Path(__file__).parent is a pretty easy invocation to use.
Signed-off-by: Tristan Partin <tristan@neon.tech>
In the passing, rename it to NeonLocalCli, to reflect that the binary
is called 'neon_local'.
Add wrapper for the 'timeline_import' command, eliminating the last
raw call to the raw_cli() function from tests, except for a few in
test_neon_cli.py which are about testing the 'neon_local' iteself. All
the other calls are now made through the strongly-typed wrapper
functions
Add wrappers for a few commands that didn't have them before. Move the
logic to generate tenant and timeline IDs from NeonCli to the callers,
so that NeonCli is more purely just a type-safe wrapper around
'neon_local'.
When endpoint is stopped in immediate mode and started again there is a
chance of old connection delivering some WAL to safekeepers after second
start checked need for sync-safekeepers and thus grabbed basebackup LSN.
It makes basebackup unusable, so compute panics. Avoid flakiness by
waiting for walreceivers on safekeepers to be gone in such cases. A
better way would be to bump term on safekeepers if sync-safekeepers is
skipped, but it needs more infrastructure.
ref https://github.com/neondatabase/neon/issues/9079
Verbosity in this case is good when reading the code. Short options are
better when operating in an interactive shell.
Signed-off-by: Tristan Partin <tristan@neon.tech>
As @koivunej mentioned in the storage channel, for regress test, we
don't need to create a log file for the scrubber, and we should reduce
noisy logs.
## Summary of changes
* Disable log file creation for storage scrubber
* Only log at info level
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
Even with the 100 ms interval, on my laptop the pageserver always
becomes available on second attempt, so this saves about 900 ms at
every test startup.
misc changes split out from #8855
- **allow cloning the request context in a read-only fashion for
background tasks**
- **propagate endpoint and request context through the jwk cache**
- **only allow password based auth for md5 during testing**
- **remove auth info from conn info**
There's currently no way to just start/stop broker from `neon_local`.
This PR
* adds a sub-command
* uses that sub-command from the test suite instead of the pre-existing
Python `subprocess` based approach.
Found this useful during investigation
https://github.com/neondatabase/cloud/issues/16886.
We added another migration in 5876c441ab,
but didn't bump this value. This had no effect, but best to fix it
anyway.
Signed-off-by: Tristan Partin <tristan@neon.tech>
pg_distrib_dir doesn't include the Postgres version and only depends
on env variables which cannot change during a test run, so it can be
marked as session-scoped. Similarly, the platform cannot change during
a test run.
There was another copy of it in utils.py. The only difference is that
the version in utils.py tolerates files that are concurrently
removed. That seems fine for the few callers in neon_fixtures.py too.
This adds preliminary PG17 support to Neon, based on RC1 / 2024-09-04
07b828e9d4
NOTICE: The data produced by the included version of the PostgreSQL fork
may not be compatible with the future full release of PostgreSQL 17 due to
expected or unexpected future changes in magic numbers and internals.
DO NOT EXPECT DATA IN V17-TENANTS TO BE COMPATIBLE WITH THE 17.0
RELEASE!
Co-authored-by: Anastasia Lubennikova <anastasia@neon.tech>
Co-authored-by: Alexander Bayandin <alexander@neon.tech>
Co-authored-by: Konstantin Knizhnik <knizhnik@neon.tech>
Co-authored-by: Heikki Linnakangas <heikki@neon.tech>
Makes it consistent with the "timeline create" and "timeline import"
commands, which allowed you to pass the timeline id as argument. This
also makes it unnecessary to parse the timeline ID from the output in
the python function that calls it.
The tenant ID was not actually generated here but in NeonEnvBuilder.
And the "neon_local init" command hasn't been able to generate the
initial tenant since 8712e1899e anyway.
I wish it worked, but it's been broken for a long time, so let's admit
defeat and remove it.
The idea of sharing the same pageserver and safekeeper environment
between tests is still sound, and it could save a lot of time in our
CI. We should perhaps put some time into doing that, but we're better
off starting from scratch than trying to make TEST_SHARED_FIXTURES
work in its current form.
For control-plane managed tenants, we have the page in the admin console
that lists all tenants on a specific pageserver. But for
storage-controller managed ones, we don't have that functionality for
now.
## Summary of changes
Adds an API that lists all shards on a given node (intention + observed)
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
## Problem
We want to do AZ aware scheduling, but don't have enough metadata.
## Summary of changes
Introduce a `preferred_az_id` concept for each managed tenant shard.
In a future PR, the scheduler will use this as a soft preference.
The idea is to try and keep the shard attachments within the same AZ.
Under the assumption that the compute was placed in the correct AZ,
this reduces the chances of cross AZ trafic from between compute and PS.
In terms of code changes we:
1. Add a new nullable `preferred_az_id` column to the `tenant_shards`
table. Also include an in-memory counterpart.
2. Populate the preferred az on tenant creation and shard splits.
3. Add an endpoint which allows to bulk-set preferred AZs.
(3) gives us the migration path. I'll write a script which queries the
cplane db in the region and sets the preferred az of all shards with an
active compute to the AZ of said compute. For shards without an active compute,
I'll use the AZ of the currently attached pageserver
since this is what cplane uses now to schedule computes.
## Problem
https://github.com/neondatabase/neon/pull/8852 introduced a new nullable
column for the `nodes` table: `availability_zone_id`
## Summary of changes
* Make neon local and the test suite always provide an az id
* Make the az id field in the ps registration request mandatory
* Migrate the column to non-nullable and adjust in memory state
accordingly
* Remove the code that was used to populate the az id for pre-existing
nodes
This PR simplifies the pageserver configuration parsing as follows:
* introduce the `pageserver_api::config::ConfigToml` type
* implement `Default` for `ConfigToml`
* use serde derive to do the brain-dead leg-work of processing the toml
document
* use `serde(default)` to fill in default values
* in `pageserver` crate:
* use `toml_edit` to deserialize the pageserver.toml string into a
`ConfigToml`
* `PageServerConfig::parse_and_validate` then
* consumes the `ConfigToml`
* destructures it exhaustively into its constituent fields
* constructs the `PageServerConfig`
The rules are:
* in `ConfigToml`, use `deny_unknown_fields` everywhere
* static default values go in `pageserver_api`
* if there cannot be a static default value (e.g. which default IO
engine to use, because it depends on the runtime), make the field in
`ConfigToml` an `Option`
* if runtime-augmentation of a value is needed, do that in
`parse_and_validate`
* a good example is `virtual_file_io_engine` or `l0_flush`, both of
which need to execute code to determine the effective value in
`PageServerConf`
The benefits:
* massive amount of brain-dead repetitive code can be deleted
* "unused variable" compile-time errors when removing a config value,
due to the exhaustive destructuring in `parse_and_validate`
* compile-time errors guide you when adding a new config field
Drawbacks:
* serde derive is sometimes a bit too magical
* `deny_unknown_fields` is easy to miss
Future Work / Benefits:
* make `neon_local` use `pageserver_api` to construct `ConfigToml` and
write it to `pageserver.toml`
* This provides more type safety / coompile-time errors than the current
approach.
### Refs
Fixes#3682
### Future Work
* `remote_storage` deser doesn't reject unknown fields
https://github.com/neondatabase/neon/issues/8915
* clean up `libs/pageserver_api/src/config.rs` further
* break up into multiple files, at least for tenant config
* move `models` as appropriate / refine distinction between config and
API models / be explicit about when it's the same
* use `pub(crate)` visibility on `mod defaults` to detect stale values
We currently do not record safekeepers in the storage controller
database. We want to migrate timelines across safekeepers eventually, so
start recording the safekeepers on deploy.
Cc: #8698
Endpoint implementation sends msg to manager requesting to do the
reset. Manager stops current partial backup upload task if it exists and
performs the reset.
Also slightly tweak eviction condition: all full segments before
flush_lsn must be uploaded (and committed) and there must be only one
segment left on disk (partial). This allows to evict timelines which
started not on the first segment and didn't fill the whole
segment (previous condition wasn't good because last_removed_segno was
0).
ref https://github.com/neondatabase/neon/issues/8759
## Problem
Neon local set-up does not inject an az id in `metadata.json`. See real
change in https://github.com/neondatabase/neon/pull/8852.
## Summary of changes
We piggyback on the existing `availability_zone` pageserver
configuration in order to avoid making neon local even more complex.
