## Problem
We recently added a "visibility" state to layers, but nothing
initializes it.
Part of:
- #8398
## Summary of changes
- Add a dependency on `range-set-blaze`, which is used as a fast
incrementally updated alternative to KeySpace. We could also use this to
replace the internals of KeySpaceRandomAccum if we wanted to. Writing a
type that does this kind of "BtreeMap & merge overlapping entries" thing
isn't super complicated, but no reason to write this ourselves when
there's a third party impl available.
- Add a function to layermap to calculate visibilities for each layer
- Add a function to Timeline to call into layermap and then apply these
visibilities to the Layer objects.
- Invoke the calculation during startup, after image layer creations,
and when removing branches. Branch removal and image layer creation are
the two ways that a layer can go from Visible to Covered.
- Add unit test & benchmark for the visibility calculation
- Expose `pageserver_visible_physical_size` metric, which should always
be <= `pageserver_remote_physical_size`.
- This metric will feed into the /v1/utilization endpoint later: the
visible size indicates how much space we would like to use on this
pageserver for this tenant.
- When `pageserver_visible_physical_size` is greater than
`pageserver_resident_physical_size`, this is a sign that the tenant has
long-idle branches, which result in layers that are visible in
principle, but not used in practice.
This does not keep visibility hints up to date in all cases:
particularly, when creating a child timeline, any previously covered
layers will not get marked Visible until they are accessed.
Updates after image layer creation could be implemented as more of a
special case, but this would require more new code: the existing depth
calculation code doesn't maintain+yield the list of deltas that would be
covered by an image layer.
## Performance
This operation is done rarely (at startup and at timeline deletion), so
needs to be efficient but not ultra-fast.
There is a new `visibility` bench that measures runtime for a synthetic
100k layers case (`sequential`) and a real layer map (`real_map`) with
~26k layers.
The benchmark shows runtimes of single digit milliseconds (on a ryzen
7950). This confirms that the runtime shouldn't be a problem at startup
(as we already incur S3-level latencies there), but that it's slow
enough that we definitely shouldn't call it more often than necessary,
and it may be worthwhile to optimize further later (things like: when
removing a branch, only bother scanning layers below the branchpoint)
```
visibility/sequential time: [4.5087 ms 4.5894 ms 4.6775 ms]
change: [+2.0826% +3.9097% +5.8995%] (p = 0.00 < 0.05)
Performance has regressed.
Found 24 outliers among 100 measurements (24.00%)
2 (2.00%) high mild
22 (22.00%) high severe
min: 0/1696070, max: 93/1C0887F0
visibility/real_map time: [7.0796 ms 7.0832 ms 7.0871 ms]
change: [+0.3900% +0.4505% +0.5164%] (p = 0.00 < 0.05)
Change within noise threshold.
Found 4 outliers among 100 measurements (4.00%)
3 (3.00%) high mild
1 (1.00%) high severe
min: 0/1696070, max: 93/1C0887F0
visibility/real_map_many_branches
time: [4.5285 ms 4.5355 ms 4.5434 ms]
change: [-1.0012% -0.8004% -0.5969%] (p = 0.00 < 0.05)
Change within noise threshold.
```
## Problem
We lack insight into:
- How much of a tenant's physical size is image vs. delta layers
- Average sizes of image vs. delta layers
- Total layer counts per timeline, indicating size of index_part object
As well as general observability love, this is motivated by
https://github.com/neondatabase/neon/issues/6738, where we need to
define some sensible thresholds for storage amplification, and using
total physical size may not work well (if someone does a lot of DROPs
then it's legitimate for the physical-synthetic ratio to be huge), but
the ratio between image layer size and delta layer size may be a better
indicator of whether we're generating unreasonable quantities of image
layers.
## Summary of changes
- Add pageserver_layer_bytes and pageserver_layer_count metrics,
labelled by timeline and `kind` (delta or image)
- Add & subtract these with LayerInner's lifetime.
I'm intentionally avoiding using a generic metric RAII guard object, to
avoid bloating LayerInner: it already has all the information it needs
to update metric on new+drop.
## Problem
The metrics we have today aren't convenient for planning around the
impact of timeline archival on costs.
Closes: https://github.com/neondatabase/neon/issues/8108
## Summary of changes
- Add metric `pageserver_archive_size`, which indicates the logical
bytes of data which we would expect to write into an archived branch.
- Add metric `pageserver_pitr_history_size`, which indicates the
distance between last_record_lsn and the PITR cutoff.
These metrics are somewhat temporary: when we implement #8088 and
associated consumption metric changes, these will reach a final form.
For now, an "archived" branch is just any branch outside of its parent's
PITR window: later, archival will become an explicit state (which will
_usually_ correspond to falling outside the parent's PITR window).
The overall volume of timeline metrics is something to watch, but we are
removing many more in https://github.com/neondatabase/neon/pull/8245
than this PR is adding.
Part of #7497, closes#8120.
## Summary of changes
This PR adds a metric to track the number of valid leases after `GCInfo`
gets refreshed each time.
Besides this metric, we should also track disk space and synthetic size
(after #8071 is closed) to make sure leases are used properly.
Signed-off-by: Yuchen Liang <yuchen@neon.tech>
part of Epic https://github.com/neondatabase/neon/issues/7386
# Motivation
The materialized page cache adds complexity to the code base, which
increases the maintenance burden and risk for subtle and hard to
reproduce bugs such as #8050.
Further, the best hit rate that we currently achieve in production is ca
1% of materialized page cache lookups for
`task_kind=PageRequestHandler`. Other task kinds have hit rates <0.2%.
Last, caching page images in Pageserver rewards under-sized caches in
Computes because reading from Pageserver's materialized page cache over
the network is often sufficiently fast (low hundreds of microseconds).
Such Computes should upscale their local caches to fit their working
set, rather than repeatedly requesting the same page from Pageserver.
Some more discussion and context in internal thread
https://neondb.slack.com/archives/C033RQ5SPDH/p1718714037708459
# Changes
This PR removes the materialized page cache code & metrics.
The infrastructure for different key kinds in `PageCache` is left in
place, even though the "Immutable" key kind is the only remaining one.
This can be further simplified in a future commit.
Some tests started failing because their total runtime was dependent on
high materialized page cache hit rates. This test makes them
fixed-runtime or raises pytest timeouts:
* test_local_file_cache_unlink
* test_physical_replication
* test_pg_regress
# Performance
I focussed on ensuring that this PR will not result in a performance
regression in prod.
* **getpage** requests: our production metrics have shown the
materialized page cache to be irrelevant (low hit rate). Also,
Pageserver is the wrong place to cache page images, it should happen in
compute.
* **ingest** (`task_kind=WalReceiverConnectionHandler`): prod metrics
show 0 percent hit rate, so, removing will not be a regression.
* **get_lsn_by_timestamp**: important API for branch creation, used by
control pane. The clog pages that this code uses are not
materialize-page-cached because they're not 8k. No risk of introducing a
regression here.
We will watch the various nightly benchmarks closely for more results
before shipping to prod.
ref https://github.com/neondatabase/neon/issues/7443
## Summary of changes
This pull request adds a size estimator for aux files. Each timeline
stores a cached `isize` for the estimated total size of aux files. It
gets reset on basebackup, and gets updated for each aux file
modification. TODO: print a warning when it exceeds the size.
The size metrics is not accurate. Race between `on_basebackup` and other
functions could create a negative basebackup size, but the chance is
rare. Anyways, this does not impose any extra I/Os to the storage as
everything is computed in-memory.
The aux files are only stored on shard 0. As basebackups are only
generated on shard 0, only shard 0 will report this metrics.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
## Problem
We recently went through an incident where compaction was inhibited by a
bug. We didn't observe this until quite late because we did not have alerting
on deep reads.
## Summary of changes
+ Tweak an existing metric that tracks the depth of a read on the
non-vectored read path:
* Give it a better name
* Track all layers
* Larger buckets
+ Add a similar metric for the vectored read path
+ Add a compaction smoke test which uses these metrics. This test would
have caught
the compaction issue mentioned earlier.
Related https://github.com/neondatabase/neon/issues/7428
refs #6737
# Problem
Before this PR, on-demand downloads weren't measured per tenant_id.
This makes root-cause analysis of latency spikes harder, requiring us to
resort to log scraping for
```
{neon_service="pageserver"} |= `downloading on-demand` |= `$tenant_id`
```
which can be expensive when zooming out in Grafana.
Context: https://neondb.slack.com/archives/C033RQ5SPDH/p1707809037868189
# Solution / Changes
- Remove the calls_started histogram
- I did the dilegence, there are only 2 dashboards using this histogram,
and in fact only one uses it as a histogram, the other just as a
a counter.
- [Link
1](8115b54d9f/neonprod/dashboards/hkXNF7oVz/dashboard-Z31XmM24k.yaml (L1454)):
`Pageserver Thrashing` dashboard, linked from playbook, will fix.
- [Link
2](8115b54d9f/neonprod/dashboards/CEllzAO4z/dashboard-sJqfNFL4k.yaml (L599)):
one of my personal dashboards, unused for a long time, already broken in
other ways, no need to fix.
- replace `pageserver_remote_timeline_client_calls_unfinished` gauge
with a counter pair
- Required `Clone`-able `IntCounterPair`, made the necessary changes in
the `libs/metrics` crate
- fix tests to deal with the fallout
A subsequent PR will remove a timeline-scoped metric to compensate.
Note that we don't need additional global counters for the per-timeline
counters affected by this PR; we can use the `remote_storage` histogram
for those, which, conveniently, also include the secondary-mode
downloads, which aren't covered by the remote timeline client metrics
(should they?).
## Problem
When investigating test failures
(https://github.com/neondatabase/neon/issues/6813) I noticed we were
doing a bunch of Reconciler runs right after splitting a tenant.
It's because the splitting test does a pageserver restart, and there was
a bug in /re-attach handling, where we would update the generation
correctly in the database and intent state, but not observed state,
thereby triggering a reconciliation on the next call to maybe_reconcile.
This didn't break anything profound (underlying rules about generations
were respected), but caused the storage controller to do an un-needed
extra round of bumping the generation and reconciling.
## Summary of changes
- Start adding metrics to the storage controller
- Assert on the number of reconciles done in test_sharding_split_smoke
- Fix /re-attach to update `observed` such that we don't spuriously
re-reconcile tenants.
There is O(n^2) issues due to how we store these directories (#6626), so
it's good to keep an eye on them and ensure the numbers stay low.
The new per-timeline metric `pageserver_directory_entries_count`
isn't perfect, namely we don't calculate it every time we attach
the timeline, but only if there is an actual change.
Also, it is a collective metric over multiple scalars. Lastly,
we only emit the metric if it is above a certain threshold.
However, the metric still give a feel for the general size of the timeline.
We care less for small values as the metric is mainly there to
detect and track tenants with large directory counts.
We also expose the directory counts in `TimelineInfo` so that one can
get the detailed size distribution directly via the pageserver's API.
Related: #6642 , https://github.com/neondatabase/cloud/issues/10273
Before tenant migration it made sense to leak broken tenants in the
metrics until restart. Nowdays it makes less sense because on
cancellations we set the tenant broken. The set metric still allows
filterable alerting.
Fixes: #6507
## Problem
To test sharding, we need something to control it. We could write python
code for doing this from the test runner, but this wouldn't be usable
with neon_local run directly, and when we want to write tests with large
number of shards/tenants, Rust is a better fit efficiently handling all
the required state.
This service enables automated tests to easily get a system with
sharding/HA without the test itself having to set this all up by hand:
existing tests can be run against sharded tenants just by setting a
shard count when creating the tenant.
## Summary of changes
Attachment service was previously a map of TenantId->TenantState, where
the principal state stored for each tenant was the generation and the
last attached pageserver. This enabled it to serve the re-attach and
validate requests that the pageserver requires.
In this PR, the scope of the service is extended substantially to do
overall management of tenants in the pageserver, including
tenant/timeline creation, live migration, evacuation of offline
pageservers etc. This is done using synchronous code to make declarative
changes to the tenant's intended state (`TenantState.policy` and
`TenantState.intent`), which are then translated into calls into the
pageserver by the `Reconciler`.
Top level summary of modules within
`control_plane/attachment_service/src`:
- `tenant_state`: structure that represents one tenant shard.
- `service`: implements the main high level such as tenant/timeline
creation, marking a node offline, etc.
- `scheduler`: for operations that need to pick a pageserver for a
tenant, construct a scheduler and call into it.
- `compute_hook`: receive notifications when a tenant shard is attached
somewhere new. Once we have locations for all the shards in a tenant,
emit an update to postgres configuration via the neon_local `LocalEnv`.
- `http`: HTTP stubs. These mostly map to methods on `Service`, but are
separated for readability and so that it'll be easier to adapt if/when
we switch to another RPC layer.
- `node`: structure that describes a pageserver node. The most important
attribute of a node is its availability: marking a node offline causes
tenant shards to reschedule away from it.
This PR is a precursor to implementing the full sharding service for
prod (#6342). What's the difference between this and a production-ready
controller for pageservers?
- JSON file persistence to be replaced with a database
- Limited observability.
- No concurrency limits. Marking a pageserver offline will try and
migrate every tenant to a new pageserver concurrently, even if there are
thousands.
- Very simple scheduler that only knows to pick the pageserver with
fewest tenants, and place secondary locations on a different pageserver
than attached locations: it does not try to place shards for the same
tenant on different pageservers. This matters little in tests, because
picking the least-used pageserver usually results in round-robin
placement.
- Scheduler state is rebuilt exhaustively for each operation that
requires a scheduler.
- Relies on neon_local mechanisms for updating postgres: in production
this would be something that flows through the real control plane.
---------
Co-authored-by: Arpad Müller <arpad-m@users.noreply.github.com>
When doing global queries in VictoriaMetrics, the per-timeline
histograms make us run into cardinality limits.
We don't want to give them up just yet because we don't
have an alternative for drilling down on timeline-specific
performance issues.
So, add a pre-aggregated histogram and add observations to it
whenever we add observations to the per-timeline histogram.
While we're at it, switch to using a strummed enum for the operation
type names.
We currently have a timeseries for each of the tenants in different
states. We only want this for Broken. Other states could be counters.
Fix this by making the `pageserver_tenant_states_count` a counter
without a `tenant_id` and
add a `pageserver_broken_tenants_count` which has a `tenant_id` label,
each broken tenant being 1.
The histogram distinguishes by ok/err.
I took the liberty to create a small abstraction for such use cases.
It helps keep the label values inside `metrics.rs`, right next
to the place where the metric and its labels are declared.
## Problem
Some metrics are better to be observed at page-server level. Otherwise,
as we have a lot of tenants in production, we cannot do a sum b/c
Prometheus has limit on how many time series we can aggregate. This also
helps reduce metrics scraping size.
## Summary of changes
Some integration tests are likely not to pass as it will check the
existence of some metrics. Waiting for CI complete and fix them.
Metrics downgraded: page cache hit (where we are likely to have a
page-server level page cache in the future instead of per-tenant), and
reconstruct time (this would better be tenant-level, as we have one pg
replayer for each tenant, but now we make it page-server level as we do
not need that fine-grained data).
---------
Signed-off-by: Alex Chi <iskyzh@gmail.com>
## Problem
This PR includes doc changes to the current metrics as well as adding
new metrics. With the new set of metrics, we can quantitatively analyze
the read amp., write amp. and space amp. in the system, when used
together with https://github.com/neondatabase/neonbench
close https://github.com/neondatabase/neon/issues/4312
ref https://github.com/neondatabase/neon/issues/4347
compaction metrics TBD, a novel idea is to print L0 file number and
number of layers in the system, and we can do this in the future when we
start working on compaction.
## Summary of changes
* Add `READ_NUM_FS_LAYERS` for computing read amp.
* Add `MATERIALIZED_PAGE_CACHE_HIT_UPON_REQUEST`.
* Add `GET_RECONSTRUCT_DATA_TIME`. GET_RECONSTRUCT_DATA_TIME +
RECONSTRUCT_TIME + WAIT_LSN_TIME should be approximately total time of
reads.
* Add `5.0` and `10.0` to `STORAGE_IO_TIME_BUCKETS` given some fsync
runs slow (i.e., > 1s) in some cases.
* Some `WAL_REDO` metrics are only used when Postgres is involved in the
redo process.
---------
Signed-off-by: Alex Chi <iskyzh@gmail.com>
For the "worst-case /storage usage panel", we need to compute
```
remote size + local-only size
```
We currently don't have a metric for local-only layers.
The number of in-flight layers in the upload queue is just that, so, let
Prometheus scrape it.
The metric is two counters (started and finished).
The delta is the amount of in-flight uploads in the queue.
The metrics are incremented in the respective `call_unfinished_metric_*`
functions.
These track ongoing operations by file_kind and op_kind.
We only need this metric for layer uploads, so, there's the new
RemoteTimelineClientMetricsCallTrackSize type that forces all call sites
to decide whether they want the size tracked or not.
If we find that other file_kinds or op_kinds are interesting (metadata
uploads, layer downloads, layer deletes) are interesting, we can just
enable them, and they'll be just another label combination within the
metrics that this PR adds.
fixes https://github.com/neondatabase/neon/issues/3922
This patch extends the libmetrics logging setup functionality with a
`tracing` layer that increments a Prometheus counter each time we log a
log message. We have the counter per tracing event level. This allows
for monitoring WARN and ERR log volume without parsing the log. Also, it
would allow cross-checking whether logs got dropped on the way into
Loki.
It would be nicer if we could hook deeper into the tracing logging
layer, to avoid evaluating the filter twice.
But I don't know how to do it.
This patch adds two metrics that will enable us to detect *thrashing* of
layers, i.e., repetitions of `eviction, on-demand-download, eviction,
... ` for a given layer.
The first metric counts all layer evictions per timeline. It requires no
further explanation. The second metric counts the layer evictions where
the layer was resident for less than a given threshold.
We can alert on increments to the second metric. The first metric will
serve as a baseline, and further, it's generally interesting, outside of
thrashing.
The second metric's threshold is configurable in PageServerConf and
defaults to 24h. The threshold value is reproduced as a label in the
metric because the counter's value is semantically tied to that
threshold. Since changes to the config and hence the label value are
infrequent, this will have low storage overhead in the metrics storage.
The data source to determine the time that the layer was resident is the
file's `mtime`. Using `mtime` is more of a crutch. It would be better if
Pageserver did its own persistent bookkeeping of residence change events
instead of relying on the filesystem. We had some discussion about this:
https://github.com/neondatabase/neon/pull/3809#issuecomment-1470448900
My position is that `mtime` is good enough for now. It can theoretically
jump forward if someone copies files without resetting `mtime`. But that
shouldn't happen in practice. Note that moving files back and forth
doesn't change `mtime`, nor does `chown` or `chmod`. Lastly, `rsync -a`,
which is typically used for filesystem-level backup / restore, correctly
syncs `mtime`.
I've added a label that identifies the data source to keep options open
for a future, better data source than `mtime`. Since this value will
stay the same for the time being, it's not a problem for metrics
storage.
refs https://github.com/neondatabase/neon/issues/3728
- use parse_metrics() in all places where we parse Prometheus metrics
- query_all: make `filter` argument optional
- encourage using properly parsed, typed metrics by changing get_metrics()
to return already-parsed metrics. The new get_metric_str() method,
like in the Safekeeper type, returns the raw text response.
This patch adds a LaunchTimestamp type to the `metrics` crate,
along with a `libmetric_` Prometheus metric.
The initial user is pageserver.
In addition to exposing the Prometheus metric, it also reproduces
the launch timestamp as a header in the API responses.
The motivation for this is that we plan to scrape the pageserver's
/v1/tenant/:tenant_id/timeline/:timeline_id/layer
HTTP endpoint over time. It will soon expose access metrics (#3496)
which reset upon process restart. We will use the pageserver's launch
ID to identify a restart between two scrape points.
However, there are other potential uses. For example, we could use
the Prometheus metric to annotate Grafana plots whenever the launch
timestamp changes.
Related to: https://github.com/neondatabase/neon/issues/2848
`pageserver_storage_operations_seconds` is the most expensive metric we
have, as there are a lot of tenants/timelines and the histogram had 42
buckets. These are quite sparse too, so instead of having a histogram
per timeline, create a new histogram
`pageserver_storage_operations_seconds_global` without tenant and
timeline dimensions and replace `pageserver_storage_operations_seconds`
with sum and counter.
Co-authored-by: Joonas Koivunen <joonas@neon.tech>
## Describe your changes
Added a metric that allow to monitor tenants state
## Issue ticket number and link
https://github.com/neondatabase/neon/issues/3161
## Checklist before requesting a review
- [X] I have performed a self-review of my code.
- [X] I have added an e2e test for it.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [ ] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
- Clean up redundant metric removal in TimelineMetrics::drop.
RemoteTimelineClientMetrics is responsible for cleaning up
REMOTE_OPERATION_TIME andREMOTE_UPLOAD_QUEUE_UNFINISHED_TASKS.
- Rename `pageserver_remote_upload_queue_unfinished_tasks` to
`pageserver_remote_timeline_client_calls_unfinished`. The new name
reflects that the metric is with respect to the entire call to remote
timeline client. This includes wait time in the upload queue and hence
it's a longer span than what `pageserver_remote_OPERATION_seconds`
measures.
- Add the `pageserver_remote_timeline_client_calls_started` histogram.
See the metric description for why we need it.
- Add helper functions `call_begin` etc to `RemoteTimelineClientMetrics`
to centralize the logic for updating the metrics above (they relate to
each other, see comments in code).
- Use these constructs to track ongoing downloads in
`pageserver_remote_timeline_client_calls_unfinished`
refs https://github.com/neondatabase/neon/issues/2029
fixes https://github.com/neondatabase/neon/issues/3249
closes https://github.com/neondatabase/neon/pull/3250
The code in this change was extracted from #2595 (Heikki’s on-demand
download draft PR).
High-Level Changes
- New RemoteLayer Type
- On-Demand Download As An Effect Of Page Reconstruction
- Breaking Semantics For Physical Size Metrics
There are several follow-up work items planned.
Refer to the Epic issue on GitHub: https://github.com/neondatabase/neon/issues/2029
closes https://github.com/neondatabase/neon/pull/3013
Co-authored-by: Kirill Bulatov <kirill@neon.tech>
Co-authored-by: Christian Schwarz <christian@neon.tech>
New RemoteLayer Type
====================
Instead of downloading all layers during tenant attach, we create
RemoteLayer instances for each of them and add them to the layer map.
On-Demand Download As An Effect Of Page Reconstruction
======================================================
At the heart of pageserver is Timeline::get_reconstruct_data(). It
traverses the layer map until it has collected all the data it needs to
produce the page image. Most code in the code base uses it, though many
layers of indirection.
Before this patch, the function would use synchronous filesystem IO to
load data from disk-resident layer files if the data was not cached.
That is not possible with RemoteLayer, because the layer file has not
been downloaded yet. So, we do the download when get_reconstruct_data
gets there, i.e., “on demand”.
The mechanics of how the download is done are rather involved, because
of the infamous async-sync-async sandwich problem that plagues the async
Rust world. We use the new PageReconstructResult type to work around
this. Its introduction is the cause for a good amount of code churn in
this patch. Refer to the block comment on `with_ondemand_download()`
for details.
Breaking Semantics For Physical Size Metrics
============================================
We rename prometheus metric pageserver_{current,resident}_physical_size to
reflect what this metric actually represents with on-demand download.
This intentionally BREAKS existing grafana dashboard and the cost model data
pipeline. Breaking is desirable because the meaning of this metrics has changed
with on-demand download. See
https://docs.google.com/document/d/12AFpvKY-7FZdR5a4CaD6Ir_rI3QokdCLSPJ6upHxJBo/edit#
for how we will handle this breakage.
Likewise, we rename the new billing_metrics’s PhysicalSize => ResidentSize.
This is not yet used anywhere, so, this is not a breaking change.
There is still a field called TimelineInfo::current_physical_size. It
is now the sum of the layer sizes in layer map, regardless of whether
local or remote. To compute that sum, we added a new trait method
PersistentLayer::file_size().
When updating the Python tests, we got rid of
current_physical_size_non_incremental. An earlier commit removed it from
the OpenAPI spec already, so this is not a breaking change.
test_timeline_size.py has grown additional assertions on the
resident_physical_size metric.
We do the accounting exclusively after updating remote IndexPart successfully.
This is cleaner & more robust than doing it upon completion of
individual layer file uploads / deletions since we can uset .set()
insteaf of add()/sub().
NB: Originally, this work was intended to be part of #3013 but it
turns out that it's completely orthogonal.
So, spin it out into this PR for easier review.
Since this change is additive, it won't break anything.
* Add test for pageserver metric cleanup once a tenant is detached.
* Remove tenant specific timeline metrics on detach.
* Use definitions from timeline_metrics in page service.
* Move metrics to own file from layered_repository/timeline.rs
* TIMELINE_METRICS: define smgr metrics
* REMOVE SMGR cleanup from timeline_metrics. Doesn't seem to work as
expected.
* Vritual file centralized metrics, except for evicted file as there's no
tenat id or timeline id.
* Use STORAGE_TIME from timeline_metrics in layered_repository.
* Remove timelineless gc metrics for tenant on detach.
* Rename timeline metrics -> metrics as it's more generic.
* Don't create a TimelineMetrics instance for VirtualFile
* Move the rest of the metric definitions to metrics.rs too.
* UUID -> ZTenantId
* Use consistent style for dict.
* Use Repository's Drop trait for dropping STORAGE_TIME metrics.
* No need for Arc, TimelineMetrics is used in just one place. Due to that,
we can fall back using ZTenantId and ZTimelineId too to avoid additional
string allocation.
- Enabled process exporter for storage services
- Changed zenith_proxy prefix to just proxy
- Removed old `monitoring` directory
- Removed common prefix for metrics, now our common metrics have `libmetrics_` prefix, for example `libmetrics_serve_metrics_count`
- Added `test_metrics_normal_work`
