Fix several test flakes:
- test_sharding_service_smoke had log failures on "Dropped LSN updates"
- test_emergency_mode had log failures on a deletion queue shutdown
check, where the check was incorrect because it was expecting channel
receiver to stay alive after cancellation token was fired.
- test_secondary_mode_eviction had racing heatmap uploads because the
test was using a live migration hook to set up locations, where that
migration was itself uploading heatmaps and generally making the
situation more complex than it needed to be.
These are the failure modes that I saw when spot checking the last few
failures of each test.
This will mostly/completely address #6511, but I'll leave that ticket
open for a couple days and then check if either of the tests named in
that ticket are flaky.
Related #6511
Before tenant migration it made sense to leak broken tenants in the
metrics until restart. Nowdays it makes less sense because on
cancellations we set the tenant broken. The set metric still allows
filterable alerting.
Fixes: #6507
## Problem
I didn't know about `wait_until` and was relying on `sleep` to wait for
stuff. This caused some tests to be flaky.
https://github.com/neondatabase/neon/issues/6561
## Summary of changes
Switch to `wait_until`, this should make it tests less flaky
## Problem
When we change which physical pageservers a tenant is attached to, we
must update the control plane so that it can update computes. This will
be done via an HTTP hook, as described in
https://www.notion.so/neondatabase/Sharding-Service-Control-Plane-interface-6de56dd310a043bfa5c2f5564fa98365#1fe185a35d6d41f0a54279ac1a41bc94
## Summary of changes
- Optional CLI args `--control-plane-jwt-token` and `-compute-hook-url`
are added. If these are set, then we will use this HTTP endpoint,
instead of trying to use neon_local LocalEnv to update compute
configuration.
- Implement an HTTP-driven version of ComputeHook that calls into the
configured URL
- Notify for all tenants on startup, to ensure that we don't miss
notifications if we crash partway through a change, and carry a
`pending_compute_notification` flag at runtime to allow notifications to
fail without risking never sending the update.
- Add a test for all this
One might wonder: why not do a "forever" retry for compute hook
notifications, rather than carrying a flag on the shard to call
reconcile() again later. The reason is that we will later limit
concurreny of reconciles, when dealing with larger numbers of shards,
and if reconcile is stuck waiting for the control plane to accept a
notification request, it could jam up the whole system and prevent us
making other changes. Anyway: from the perspective of the outside world,
we _do_ retry forever, but we don't retry forever within a given
Reconciler lifetime.
The `pending_compute_notification` logic is predicated on later adding a
background task that just calls `Service::reconcile_all` on a schedule
to make sure that anything+everything that can fail a
Reconciler::reconcile call will eventually be retried.
in `test_statvfs_pressure_{usage,min_avail_bytes}` we now race against
initial logical size calculation on-demand downloading the layers. first
wait out the initial logical sizes, then change the final asserts to be
"eventual", which is not great but it is faster than failing and
retrying.
this issue seems to happen only in debug mode tests.
Fixes: #6510
Adds an endpoint to the pageserver to S3-recover an entire tenant to a
specific given timestamp.
Required input parameters:
* `travel_to`: the target timestamp to recover the S3 state to
* `done_if_after`: a timestamp that marks the beginning of the recovery
process. retries of the query should keep this value constant. it *must*
be after `travel_to`, and also after any changes we want to revert, and
must represent a point in time before the endpoint is being called, all
of these time points in terms of the time source used by S3. these
criteria need to hold even in the face of clock differences, so I
recommend waiting a specific amount of time, then taking
`done_if_after`, then waiting some amount of time again, and only then
issuing the request.
Also important to note: the timestamps in S3 work at second accuracy, so
one needs to add generous waits before and after for the process to work
smoothly (at least 2-3 seconds).
We ignore the added test for the mocked S3 for now due to a limitation
in moto: https://github.com/getmoto/moto/issues/7300 .
Part of https://github.com/neondatabase/cloud/issues/8233
Don't require AWS access keys (AWS_ACCESS_KEY_ID and
AWS_SECRET_ACCESS_KEY) for S3 usage in the pytests, and also allow
AWS_PROFILE to be passed.
One of the two methods is required however.
This allows local development like:
```
aws sso login --profile dev
export ENABLE_REAL_S3_REMOTE_STORAGE=nonempty REMOTE_STORAGE_S3_REGION=eu-central-1 REMOTE_STORAGE_S3_BUCKET=neon-github-ci-tests AWS_PROFILE=dev
cargo build_testing && RUST_BACKTRACE=1 ./scripts/pytest -k debug-pg16 test_runner/regress/test_tenant_delete.py::test_tenant_delete_smoke
```
related earlier PR for the cargo unit tests of the `remote_storage` crate: #6202
---------
Co-authored-by: Alexander Bayandin <alexander@neon.tech>
## Problem
See https://github.com/neondatabase/cloud/issues/8673
## Summary of changes
Download missed SLRU segments from page server
## Checklist before requesting a review
- [ ] I have performed a self-review of my code.
- [ ] If it is a core feature, I have added thorough tests.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [ ] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
## Checklist before merging
- [ ] Do not forget to reformat commit message to not include the above
checklist
---------
Co-authored-by: Konstantin Knizhnik <knizhnik@neon.tech>
Co-authored-by: Heikki Linnakangas <heikki@neon.tech>
Some tests which are unit test alike do not need to run on different pg
versions. Logging test is one of them which I found for unrelated
reasons.
Co-authored-by: Alexander Bayandin <alexander@neon.tech>
Depends on: https://github.com/neondatabase/neon/pull/6468
## Problem
The sharding service will be used as a "virtual pageserver" by the
control plane -- so it needs the set of pageserver APIs that the control
plane uses, and to present them under identical URLs, including prefix
(/v1).
## Summary of changes
- Add missing APIs:
- Tenant deletion
- Timeline deletion
- Node list (used in test now, later in tools)
- `/location_config` API (for migrating tenants into the sharding
service)
- Rework attachment service URLs:
- `/v1` prefix is used for pageserver-compatible APIs
- `/upcall/v1` prefix is used for APIs that are called by the pageserver
(re-attach and validate)
- `/debug/v1` prefix is used for endpoints that are for testing
- `/control/v1` prefix is used for new sharding service APIs that do not
mimic a pageserver API, such as registering and configuring nodes.
- Add test_sharding_service. The sharding service already had some
collateral coverage from its use in general tests, but this is the first
dedicated testing for it.
## Problem
We currently can't create subscriptions in PG14 and PG15 because only
superusers can, and PG16 requires adding roles to
pg_create_subscription.
## Summary of changes
I added changes to PG14 and PG15 that allow neon_superuser to bypass the
superuser requirement. For PG16, I didn't do that but added a migration
that adds neon_superuser to pg_create_subscription. Also added a test to
make sure it works.
## Problem
Spun off from https://github.com/neondatabase/neon/pull/6394 -- this PR
is just the persistence parts and the changes that enable it to work
nicely
## Summary of changes
- Revert #6444 and #6450
- In neon_local, start a vanilla postgres instance for the attachment
service to use.
- Adopt `diesel` crate for database access in attachment service. This
uses raw SQL migrations as the source of truth for the schema, so it's a
soft dependency: we can switch libraries pretty easily.
- Rewrite persistence.rs to use postgres (via diesel) instead of JSON.
- Preserve JSON read+write at startup and shutdown: this enables using
the JSON format in compatibility tests, so that we don't have to commit
to our DB schema yet.
- In neon_local, run database creation + migrations before starting
attachment service
- Run the initial reconciliation in Service::spawn in the background, so
that the pageserver + attachment service don't get stuck waiting for
each other to start, when restarting both together in a test.
## Problem
The support for sharding in the pageserver was written before
https://github.com/neondatabase/neon/pull/6205 landed, so when it landed
we couldn't directly test sharding.
## Summary of changes
- Add `test_sharding_smoke` which tests the basics of creating a
sharding tenant, creating a timeline within it, checking that data
within it is distributed.
- Add modes to pg_regress tests for running with 4 shards as well as
with 1.
Refactor out test_disk_usage_eviction tenant creation and add a custom
case with 4 tenants, 3 made with pgbench scale=1 and 1 made with pgbench
scale=4.
Because the tenants are created in order of scales [1, 1, 1, 4] this is
simple enough to demonstrate the problem with using absolute access
times, because on a disk usage based eviction run we will
disproportionally target the *first* scale=1 tenant(s), and the later
larger tenant does not lose anything.
This test is not enough to show the difference between `relative_equal`
and `relative_spare` (the fudge factor); much larger scale will be
needed for "the large tenant", but that will make debug mode tests
slower.
Cc: #5304
## Problem
For #6423, creating a reproducer turned out to be very easy, as an
extension to test_ondemand_activation.
However, before I had diagnosed the issue, I was starting with a more
brute force approach of running creation API calls in the background
while restarting a pageserver, and that shows up a bunch of other
interesting issues.
In this PR:
- Add the reproducer for #6423 by extending `test_ondemand_activation`
(confirmed that this test fails if I revert the fix from
https://github.com/neondatabase/neon/pull/6430)
- In timeline creation, return 503 responses when we get an error and
the tenant's cancellation token is set: this covers the cases where we
get an anyhow::Error from something during timeline creation as a result
of shutdown.
- While waiting for tenants to become active during creation, don't
.map_err() the result to a 500: instead let the `From` impl map the
result to something appropriate (this includes mapping shutdown to 503)
- During tenant creation, we were calling `Tenant::load_local` because
no Preload object is provided. This is usually harmless because the
tenant dir is empty, but if there are some half-created timelines in
there, bad things can happen. Propagate the SpawnMode into
Tenant::attach, so that it can properly skip _any_ attempt to load
timelines if creating.
- When we call upsert_location, there's a SpawnMode that tells us
whether to load from remote storage or not. But if the operation is a
retry and we already have the tenant, it is not correct to skip loading
from remote storage: there might be a timeline there. This isn't
strictly a correctness issue as long as the caller behaves correctly
(does not assume that any timelines are persistent until the creation is
acked), but it's a more defensive position.
- If we shut down while the task in Tenant::attach is running, it can
end up spawning rogue tasks. Fix this by holding a GateGuard through
here, and in upsert_location shutting down a tenant after calling
tenant_spawn if we can't insert it into tenants_map. This fixes the
expected behavior that after shutdown_all_tenants returns, no tenant
tasks are running.
- Add `test_create_churn_during_restart`, which runs tenant & timeline
creations across pageserver restarts.
- Update a couple of tests that covered cancellation, to reflect the
cleaner errors we now return.
## Problem
The initdb cancellation added in #5921 is not sufficient to reliably
abort the entire initdb process. Initdb also spawns children. The tests
added by #6310 (#6385) and #6436 now do initdb cancellations on a more
regular basis.
In #6385, I attempted to issue `killpg` (after giving it a new process
group ID) to kill not just the initdb but all its spawned subprocesses,
but this didn't work. Initdb doesn't take *that* long in the end either,
so we just wait until it concludes.
## Summary of changes
* revert initdb cancellation support added in #5921
* still return `Err(Cancelled)` upon cancellation, but this is just to
not have to remove the cancellation infrastructure
* fixes to the `test_tenant_delete_races_timeline_creation` test to make
it reliably pass
Fixes#6385
In the most straightforward way; safekeeper performs it in DELETE endpoint
implementation, with no coordination between sks.
delete_force endpoint in the code is renamed to delete as there is only one way
to delete.
## Problem
For PRs with `run-benchmarks` label, we don't upload results to the db,
making it harder to debug such tests. The only way to see some
numbers is by examining GitHub Action output which is really
inconvenient.
This PR adds zenbenchmark metrics to Allure reports.
## Summary of changes
- Create a json file with zenbenchmark results and attach it to allure
report
## Problem
To test sharding, we need something to control it. We could write python
code for doing this from the test runner, but this wouldn't be usable
with neon_local run directly, and when we want to write tests with large
number of shards/tenants, Rust is a better fit efficiently handling all
the required state.
This service enables automated tests to easily get a system with
sharding/HA without the test itself having to set this all up by hand:
existing tests can be run against sharded tenants just by setting a
shard count when creating the tenant.
## Summary of changes
Attachment service was previously a map of TenantId->TenantState, where
the principal state stored for each tenant was the generation and the
last attached pageserver. This enabled it to serve the re-attach and
validate requests that the pageserver requires.
In this PR, the scope of the service is extended substantially to do
overall management of tenants in the pageserver, including
tenant/timeline creation, live migration, evacuation of offline
pageservers etc. This is done using synchronous code to make declarative
changes to the tenant's intended state (`TenantState.policy` and
`TenantState.intent`), which are then translated into calls into the
pageserver by the `Reconciler`.
Top level summary of modules within
`control_plane/attachment_service/src`:
- `tenant_state`: structure that represents one tenant shard.
- `service`: implements the main high level such as tenant/timeline
creation, marking a node offline, etc.
- `scheduler`: for operations that need to pick a pageserver for a
tenant, construct a scheduler and call into it.
- `compute_hook`: receive notifications when a tenant shard is attached
somewhere new. Once we have locations for all the shards in a tenant,
emit an update to postgres configuration via the neon_local `LocalEnv`.
- `http`: HTTP stubs. These mostly map to methods on `Service`, but are
separated for readability and so that it'll be easier to adapt if/when
we switch to another RPC layer.
- `node`: structure that describes a pageserver node. The most important
attribute of a node is its availability: marking a node offline causes
tenant shards to reschedule away from it.
This PR is a precursor to implementing the full sharding service for
prod (#6342). What's the difference between this and a production-ready
controller for pageservers?
- JSON file persistence to be replaced with a database
- Limited observability.
- No concurrency limits. Marking a pageserver offline will try and
migrate every tenant to a new pageserver concurrently, even if there are
thousands.
- Very simple scheduler that only knows to pick the pageserver with
fewest tenants, and place secondary locations on a different pageserver
than attached locations: it does not try to place shards for the same
tenant on different pageservers. This matters little in tests, because
picking the least-used pageserver usually results in round-robin
placement.
- Scheduler state is rebuilt exhaustively for each operation that
requires a scheduler.
- Relies on neon_local mechanisms for updating postgres: in production
this would be something that flows through the real control plane.
---------
Co-authored-by: Arpad Müller <arpad-m@users.noreply.github.com>
Also shuts down `Broker`, which, before this PR, we did start in
`start()` but relied on the fixture to stop. Do it a bit earlier so
that, after `NeonEnv.stop()` returns, there are no child processes using
`repo_dir`.
Also, drive-by-fixes inverted logic around `ps_assert_metric_no_errors`,
missed during https://github.com/neondatabase/neon/pull/6295
---------
Co-authored-by: Alexander Bayandin <alexander@neon.tech>
## Problem
Previously, `GET /v1/tenant/:tenant_id/timeline` and `GET
/v1/tenant/:tenant_id/timeline/:timeline_id`
would bump the priority of the background task which computes the
initial logical size by cancelling
the wait on the synchronisation semaphore. However, the request would
still return an approximate
logical size. It's undesirable to force background work for a status
request.
## Summary of changes
This PR updates the priority used by the timeline status request such
that they don't do priority boosting
by default anymore. An optional query parameter,
`force-await-initial-logical-size`, is added for both
mentioned endpoints. When set to true, it will skip the concurrency
limiting semaphore and wait
for the background task to complete before returning the exact logical
size.
In order to exercise this behaviour in a test I had to add an extra
failpoint. If you think it's too intrusive,
it can be removed.
Also fixeda small bug where the cancellation of a download is reported as an
opaque download failure upstream. This caused `test_location_conf_churn`
to fail at teardown due to a WARN log line.
Closes https://github.com/neondatabase/neon/issues/6168
## Problem
The code for tenant create and tenant attach was just a special case of
what upsert_location does.
## Summary of changes
- Use `upsert_location` for create and attach APIs
- Clean up error handling in upsert_location so that it can generate
appropriate HTTP response codes
- Update tests that asserted the old non-idempotent behavior of attach
- Rework the `test_ignore_while_attaching` test, and fix tenant shutdown
during activation, which this test was supposed to cover, but it was
actually just waiting for activation to complete.
Part of #5771
Extracted from https://github.com/neondatabase/neon/pull/6214
This PR makes the test suite sensitive to the new env var
`NEON_ENV_BUILDER_FROM_REPO_DIR_USE_OVERLAYFS`.
If it is set, `NeonEnvBuilder.from_repo_dir` uses overlayfs
to duplicate the the snapshot repo dir contents.
Since mounting requires root privileges, we use sudo to perform
the mounts. That, and macOS support, is also why copytree remains
the default.
If we ever run on a filesystem with copy reflink support, we should
consider that as an alternative.
This PR can be tried on a Linux machine on the
`test_backward_compatiblity` test, which uses `from_repo_dir`.
## Problem
`black` is slow sometimes, we can replace it with `ruff format` (a new
feature in 0.1.2 [0]), which produces pretty similar to black style [1].
On my local machine (MacBook M1 Pro 16GB):
```
# `black` on main
$ hyperfine "BLACK_CACHE_DIR=/dev/null poetry run black ."
Benchmark 1: BLACK_CACHE_DIR=/dev/null poetry run black .
Time (mean ± σ): 3.131 s ± 0.090 s [User: 5.194 s, System: 0.859 s]
Range (min … max): 3.047 s … 3.354 s 10 runs
```
```
# `ruff format` on the current PR
$ hyperfine "RUFF_NO_CACHE=true poetry run ruff format"
Benchmark 1: RUFF_NO_CACHE=true poetry run ruff format
Time (mean ± σ): 300.7 ms ± 50.2 ms [User: 259.5 ms, System: 76.1 ms]
Range (min … max): 267.5 ms … 420.2 ms 10 runs
```
## Summary of changes
- Replace `black` with `ruff format` everywhere
- [0] https://docs.astral.sh/ruff/formatter/
- [1] https://docs.astral.sh/ruff/formatter/#black-compatibility
Implement API for cloning a single timeline inside a safekeeper. Also
add API for calculating a sha256 hash of WAL, which is used in tests.
`/copy` API works by copying objects inside S3 for all but the last
segments, and the last segments are copied on-disk. A special temporary
directory is created for a timeline, because copy can take a lot of
time, especially for large timelines. After all files segments have been
prepared, this directory is mounted to the main tree and timeline is
loaded to memory.
Some caveats:
- large timelines can take a lot of time to copy, because we need to
copy many S3 segments
- caller should wait for HTTP call to finish indefinetely and don't
close the HTTP connection, because it will stop the process, which is
not continued in the background
- `until_lsn` must be a valid LSN, otherwise bad things can happen
- API will return 200 if specified `timeline_id` already exists, even if
it's not a copy
- each safekeeper will try to copy S3 segments, so it's better to not
call this API in-parallel on different safekeepers
To exercise MAX_SEND_SIZE sending from safekeeper; we've had a bug with WAL
records torn across several XLogData messages. Add failpoint to safekeeper to
slow down sending. Also check for corrupted WAL complains in standby log.
Make the test a bit simpler in passing, e.g. we don't need explicit commits as
autocommit is enabled by default.
https://neondb.slack.com/archives/C05L7D1JAUS/p1703774799114719https://github.com/neondatabase/cloud/issues/9057
This is a precursor to:
- https://github.com/neondatabase/neon/pull/6185
While that PR contains big changes to neon_local and attachment_service,
this PR contains a few unrelated standalone changes generated while
working on that branch:
- Fix restarting a pageserver when it contains multiple shards for the
same tenant
- When using location_config api to attach a tenant, create its
timelines dir
- Update test paths where generations were previously optional to make
them always-on: this avoids tests having to spuriously assert that
attachment_service is not None in order to make the linter happy.
- Add a TenantShardId python implementation for subsequent use in test
helpers that will be made shard-aware
- Teach scrubber to read across shards when checking for layer
existence: this is a refactor to track the list of existent layers at
tenant-level rather than locally to each timeline. This is a precursor
to testing shard splitting.
## Problem
Various places in remote storage were not subject to a timeout (thereby
stuck TCP connections could hold things up), and did not respect a
cancellation token (so things like timeline deletion or tenant detach
would have to wait arbitrarily long).
## Summary of changes
- Add download_cancellable and upload_cancellable helpers, and use them
in all the places we wait for remote storage operations (with the
exception of initdb downloads, where it would not have been safe).
- Add a cancellation token arg to `download_retry`.
- Use cancellation token args in various places that were missing one
per #5066Closes: #5066
Why is this only "basic" handling?
- Doesn't express difference between shutdown and errors in return
types, to avoid refactoring all the places that use an anyhow::Error
(these should all eventually return a more structured error type)
- Implements timeouts on top of remote storage, rather than within it:
this means that operations hitting their timeout will lose their
semaphore permit and thereby go to the back of the queue for their
retry.
- Doing a nicer job is tracked in
https://github.com/neondatabase/neon/issues/6096
Dependency (commits inline):
https://github.com/neondatabase/neon/pull/5842
## Problem
Secondary mode tenants need a manifest of what to download. Ultimately
this will be some kind of heat-scored set of layers, but as a robust
first step we will simply use the set of resident layers: secondary
tenant locations will aim to match the on-disk content of the attached
location.
## Summary of changes
- Add heatmap types representing the remote structure
- Add hooks to Tenant/Timeline for generating these heatmaps
- Create a new `HeatmapUploader` type that is external to `Tenant`, and
responsible for walking the list of attached tenants and scheduling
heatmap uploads.
Notes to reviewers:
- Putting the logic for uploads (and later, secondary mode downloads)
outside of `Tenant` is an opinionated choice, motivated by:
- Enable future smarter scheduling of operations, e.g. uploading the
stalest tenant first, rather than having all tenants compete for a fair
semaphore on a first-come-first-served basis. Similarly for downloads,
we may wish to schedule the tenants with the hottest un-downloaded
layers first.
- Enable accessing upload-related state without synchronization (it
belongs to HeatmapUploader, rather than being some Mutex<>'d part of
Tenant)
- Avoid further expanding the scope of Tenant/Timeline types, which are
already among the largest in the codebase
- You might reasonably wonder how much of the uploader code could be a
generic job manager thing. Probably some of it: but let's defer pulling
that out until we have at least two users (perhaps secondary downloads
will be the second one) to highlight which bits are really generic.
Compromises:
- Later, instead of using digests of heatmaps to decide whether anything
changed, I would prefer to avoid walking the layers in tenants that
don't have changes: tracking that will be a bit invasive, as it needs
input from both remote_timeline_client and Layer.
## Problem
Test deletes tenant and recreates with the same ID. The recreation bumps
generation number. This could lead to stale generation warnings in the
logs.
## Summary of changes
Handle this more gracefully by re-creating in the same generation that
the tenant was previously attached in.
We could also update the tenant delete path to have the attachment
service to drop tenant state on delete, but I like having it there: it
makes debug easier, and the only time it's a problem is when a test is
re-using a tenant ID after deletion.
## Checklist before requesting a review
- [ ] I have performed a self-review of my code.
- [ ] If it is a core feature, I have added thorough tests.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [ ] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
## Checklist before merging
- [ ] Do not forget to reformat commit message to not include the above
checklist
## Problem
We need a reliable way to restore a project state (in this context, I
mean data on pageservers, safekeepers, and remote storage) from a
snapshot. The existing method (that we use in `test_compatibility`)
heavily relies on config files, which makes it harder to add/change
fields in the config.
The proposed solution uses config file only to get `default_tenant_id`
and `branch_name_mappings`.
## Summary of changes
- Add `NeonEnvBuilder#from_repo_dir` method, which allows using the
`neon_env_builder` fixture with data from a snapshot.
- Use `NeonEnvBuilder#from_repo_dir` in compatibility tests
Requires for https://github.com/neondatabase/neon/issues/6033
These tests have been loitering on a branch of mine for a while: they
already provide value even without all the secondary mode bits landed
yet, and the Workload helper is handy for other tests too.
- `Workload` is a re-usable test workload that replaces some of the
arbitrary "write a few rows" SQL that I've found my self repeating, and
adds a systematic way to append data and check that reads properly
reflect the changes. This append+validate stuff is important when doing
migrations, as we want to detect situations where we might be reading
from a pageserver that has not properly seen latest changes.
- test_multi_attach is a validation of how the pageserver handles
attaching the same tenant to multiple pageservers, from a safety point
of view. This is intentionally separate from the larger testing of
migration, to provide an isolated environment for multi-attachment.
- test_location_conf_churn is a pseudo-random walk through the various
states that TenantSlot can be put into, with validation that attached
tenants remain externally readable when they should, and as a side
effect validating that the compute endpoint's online configuration
changes work as expected.
- test_live_migration is the reference implementation of how to drive a
pair of pageservers through a zero-downtime migration of a tenant.
---------
Co-authored-by: Arpad Müller <arpad-m@users.noreply.github.com>
## Problem
A bunch of refactorings extracted from
https://github.com/neondatabase/neon/pull/6087 (not required for it);
the most significant one is using toml instead of formatted strings.
## Summary of changes
- Use toml instead of formatted strings for config
- Skip pageserver log check if `pageserver.log` doesn't exist
- `chmod -x test_runner/regress/test_config.py`
## Problem
This was wasting resources: if we run a test with mock s3 we don't then
need to run it again with local fs. When we're running in CI, we don't
need to run with the mock/local storage as well as real S3. There is
some value in having CI notice/spot issues that might otherwise only
happen when running locally, but that doesn't justify the cost of
running the tests so many more times on every PR.
## Summary of changes
- For tests that used available_remote_storages or
available_s3_storages, update them to either specify no remote storage
(therefore inherit the default, which is currently local fs), or to
specify s3_storage() for the tests that actually want an S3 API.
## Problem
Some existing tests are written in a way that's incompatible with tenant
generations.
## Summary of changes
Update all the tests that need updating: this is things like calling
through the NeonPageserver.tenant_attach helper to get a generation
number, instead of calling directly into the pageserver API. There are
various more subtle cases.
## Problem
Traditionally we would detach/attach directly with curl if we wanted to
"reboot" a single tenant. That's kind of inconvenient these days,
because one needs to know a generation number to issue an attach
request.
Closes: https://github.com/neondatabase/neon/issues/6011
## Summary of changes
- Introduce a new `/reset` API, which remembers the LocationConf from
the current attachment so that callers do not have to work out the
correct configuration/generation to use.
- As an additional support tool, allow an optional `drop_cache` query
parameter, for situations where we are concerned that some on-disk state
might be bad and want to clear that as well as the in-memory state.
One might wonder why I didn't call this "reattach" -- it's because
there's already a PS->CP API of that name and it could get confusing.
