## Problem
I noticed when onboarding lots of tenants that the AZ scheduling
violation stat was climbing, before falling later as optimisations
happened. This was happening because we first add the tenant with
PlacementPolicy::Secondary, and then later go to
PlacementPolicy::Attached, and the scheduler's behavior led to a bad AZ
choice:
1. Create a secondary location in the non-preferred AZ
2. Upgrade to Attached where we promote that non-preferred-AZ location
to attached and then create another secondary
3. Optimiser later realises we're in the wrong AZ and moves us
## Summary of changes
- Extend some logging to give more information about AZs
- When scheduling secondary location in PlacementPolicy::Secondary,
select it as if we were attached: in this mode, our business goal is to
have a warm pageserver location that we can make available as attached
quickly if needed, therefore we want it to be in the preferred AZ.
- Make optimize_secondary logic the same, so that it will consider a
secondary location in the preferred AZ to be optimal when in
PlacementPolicy::Secondary
- When transitioning to from PlacementPolicy::Attached(N) to
PlacementPolicy::Secondary, instead of arbitrarily picking a location to
keep, prefer to keep the location in the preferred AZ
## Problem
Tests for logical replication (on Staging) have been failing for some
time because logical replication is not enabled for them. This issue
occurred after switching to an org API key with a different default
setting, where logical replication was not enabled by default.
## Summary of changes
- Add `enable_logical_replication` input to
`actions/neon-project-create`
- Enable logical replication in `test-logical-replication` job
Fixes flaky test_lr_with_slow_safekeeper test #10242
Fix query to `pg_catalog.pg_stat_subscription` catalog to handle table
synchronization and parallel LR correctly.
## Problem
This test would sometimes emit unexpected logs from the storage
controller's requests to do migrations, which overlap with the test's
restarts of pageservers, where those migrations are happening some time
after a shard split as the controller moves load around.
Example:
https://neon-github-public-dev.s3.amazonaws.com/reports/pr-10602/13067323736/index.html#testresult/f66f1329557a1fc5/retries
## Summary of changes
- Do a reconcile_until_idle after shard split, so that the rest of the
test doesn't run concurrently with migrations
## Problem
This test may not fully detect data corruption during splits, since we
don't force-compact the entire keyspace.
## Summary of changes
Force-compact all data in `test_sharding_autosplit`.
## Problem
test_scrubber_tenant_snapshot restarts pageservers, but log validation
fails tests on any non white listed storcon warnings, making the test
flaky.
## Summary of changes
Allow warns like
2025-01-29T12:37:42.622179Z WARN reconciler{seq=1
tenant_id=2011077aea9b4e8a60e8e8a19407634c shard_id=0004}: Call to node
2 (localhost:15352) management API failed, will retry (attempt 1):
receive body: error sending request for url
(http://localhost:15352/v1/tenant/2011077aea9b4e8a60e8e8a19407634c-0004/location_config):
client error (Connect)
ref https://github.com/neondatabase/neon/issues/10462
The test runs this query:
select count(*), sum(data::bigint)::bigint from t
to validate the test results between each part of the test. It performs
a simple sequential scan and aggregation, but was taking an order of
magnitude longer on v17 than on previous Postgres versions, which
sometimes caused the test to time out. There were two reasons for that:
1. On v17, the planner estimates the table to have only only one row. In
reality it has 305790 rows, and older versions estimated it at 611580,
which is not too bad given that the table has not been analyzed so the
planner bases that estimate just on the number of pages and the widths
of the datatypes. The new estimate of 1 row is much worse, and it leads
the planner to disregard parallel plans, whereas on older versions you
got a Parallel Seq Scan.
I tracked this down to upstream commit 29cf61ade3, "Consider fillfactor
when estimating relation size". With that commit,
table_block_relation_estimate_size() function calculates that each page
accommodates less than 1 row when the fillfactor is taken into account,
which rounds down to 0. In reality, the executor will always place at
least one row on a page regardless of fillfactor, but the new estimation
formula doesn't take that into account.
I reported this to pgsql-hackers
(https://www.postgresql.org/message-id/2bf9d973-7789-4937-a7ca-0af9fb49c71e%40iki.fi),
we don't need to do anything more about it in neon. It's OK to not use
parallel scans here; once issue 2. below is addressed, the queries are
fast enough without parallelism..
2. On v17, prefetching was not happening for the sequential scan. That's
because starting with v17, buffers are reserved in the shared buffer
cache before prefetching is initiated, and we use a tiny
shared_buffers=1MB setting in the tests. The prefetching is effectively
disabled with such a small shared_buffers setting, to protect the system
from completely starving out of buffers.
To address that, simply bump up shared_buffers in the test.
This patch addresses the second issue, which is enough to fix the
problem.
## Problem
The test asserts that it completes at least 10 full timeline lifecycles,
but the noisy CI environment sometimes doesn't meet that goal.
Related: https://github.com/neondatabase/neon/issues/10389
## Summary of changes
- Sleep for longer between pageserver restarts, so that the timeline
workers have more chance to make progress
- Sleep for shorter between retries from timeline worker, so that they
have better chance to get in while a pageserver is up between restarts
- Relax the success condition to complete at least 5 iterations instead
of 10
It took me ages to figure out why it was failing on my laptop. What I
saw was that when the test makes the 'import_pgdata' in the pageserver,
the pageserver actually performs a regular 'bootstrap' timeline creation
by running initdb, with no importing. It boiled down to the json request
that the test uses:
```
{
"new_timeline_id": str(timeline_id),
"import_pgdata": {
"idempotency_key": str(idempotency),
"location": {"LocalFs": {"path": str(importbucket.absolute())}},
},
},
```
and how serde deserializes into rust structs. The 'LocalFs' enum variant
in `models.rs` is gated on the 'testing' cargo feature. On a non-testing
build, that got deserialized into the default Bootstrap enum variant, as
a valid TimelineCreateRequestModeImportPgdata variant could not be
formed.
PS. IMHO we should get rid of the testing feature, compile in all the
functionality, and have a runtime flag to disable anything dangeorous.
With that, you would've gotten a nice "feature only enabled in testing
mode" error in this case, or the test would've simply worked. But that's
another story.
## Problem
We don't have per-timeline observability for read amplification.
Touches https://github.com/neondatabase/cloud/issues/23283.
## Summary of changes
Add a per-timeline `pageserver_layers_per_read` histogram.
NB: per-timeline histograms are expensive, but probably worth it in this
case.
## Problem
The current global `pageserver_layers_visited_per_vectored_read_global`
metric does not appear to accurately measure read amplification. It
divides the layer count by the number of reads in a batch, but this
means that e.g. 10 reads with 100 L0 layers will only measure a read amp
of 10 per read, while the actual read amp was 100.
While the cost of layer visits are amortized across the batch, and some
layers may not intersect with a given key, each visited layer
contributes directly to the observed latency for every read in the
batch, which is what we care about.
Touches https://github.com/neondatabase/cloud/issues/23283.
Extracted from #10566.
## Summary of changes
* Count the number of layers visited towards each read in the batch,
instead of the average across the batch.
* Rename `pageserver_layers_visited_per_vectored_read_global` to
`pageserver_layers_per_read_global`.
* Reduce the read amp log warning threshold down from 512 to 100.
## Problem
1. d04d924 added separate metrics for total requests and failures
separately, but it doesn't make much sense. We could just have a unified
counter with `http_status`.
2. `test_compute_migrations_retry` had a race, i.e., it was waiting for
the last successful migration, not an actual failure. This was revealed
after adding an assert on failure metric in d04d924.
## Summary of changes
1. Switch to unified counters for `compute_ctl` requests.
2. Add a waiting loop into `test_compute_migrations_retry` to eliminate
the race.
Part of neondatabase/cloud#17590
## Problem
Follow-up of the incident, we should not use the same bound on
lower/upper limit of compaction files. This patch adds an upper bound
limit, which is set to 50 for now.
## Summary of changes
Add `compaction_upper_limit`.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
Co-authored-by: Christian Schwarz <christian@neon.tech>
## Problem
There are several parts of `compute_ctl` with a very low visibility of
errors:
1. DB migrations that run async in the background after compute start.
2. Requests made to control plane (currently only `GetSpec`).
3. Requests made to the remote extensions server.
## Summary of changes
Add new counters to quickly evaluate the amount of errors among the
fleet.
Part of neondatabase/cloud#17590
## Problem
We need a setting to disable the flush upload wait, to test L0 flush
backpressure in staging.
## Summary of changes
Add `l0_flush_wait_upload` setting.
This reverts commit 9e55d79803.
We'll still need this until we can tune L0 flush backpressure and
compaction. I'll add a setting to disable this separately.
Note: this has to merge after the release is cut on `2025-01-17` for
compat tests to start passing.
## Problem
SK wal reader fan-out is not enabled in tests by default.
## Summary of changes
Enable it.
## Problem
There is no direct backpressure for compaction and L0 read
amplification. This allows a large buildup of compaction debt and read
amplification.
Resolves#5415.
Requires #10402.
## Summary of changes
Delay layer flushes based on the number of level 0 delta layers:
* `l0_flush_delay_threshold`: delay flushes such that they take 2x as
long (default `2 * compaction_threshold`).
* `l0_flush_stall_threshold`: stall flushes until level 0 delta layers
drop below threshold (default `4 * compaction_threshold`).
If either threshold is reached, ephemeral layer rolls also synchronously
wait for layer flushes to propagate this backpressure up into WAL
ingestion. This will bound the number of frozen layers to 1 once
backpressure kicks in, since all other frozen layers must flush before
the rolled layer.
## Analysis
This will significantly change the compute backpressure characteristics.
Recall the three compute backpressure knobs:
* `max_replication_write_lag`: 500 MB (based on Pageserver
`last_received_lsn`).
* `max_replication_flush_lag`: 10 GB (based on Pageserver
`disk_consistent_lsn`).
* `max_replication_apply_lag`: disabled (based on Pageserver
`remote_consistent_lsn`).
Previously, the Pageserver would keep ingesting WAL and build up
ephemeral layers and L0 layers until the compute hit
`max_replication_flush_lag` at 10 GB and began backpressuring. Now, once
we delay/stall WAL ingestion, the compute will begin backpressuring
after `max_replication_write_lag`, i.e. 500 MB. This is probably a good
thing (we're not building up a ton of compaction debt), but we should
consider tuning these settings.
`max_replication_flush_lag` probably doesn't serve a purpose anymore,
and we should consider removing it.
Furthermore, the removal of the upload barrier in #10402 will mean that
we no longer backpressure flushes based on S3 uploads, since
`max_replication_apply_lag` is disabled. We should consider enabling
this as well.
### When and what do we compact?
Default compaction settings:
* `compaction_threshold`: 10 L0 delta layers.
* `compaction_period`: 20 seconds (between each compaction loop check).
* `checkpoint_distance`: 256 MB (size of L0 delta layers).
* `l0_flush_delay_threshold`: 20 L0 delta layers.
* `l0_flush_stall_threshold`: 40 L0 delta layers.
Compaction characteristics:
* Minimum compaction volume: 10 layers * 256 MB = 2.5 GB.
* Additional compaction volume (assuming 128 MB/s WAL): 128 MB/s * 20
seconds = 2.5 GB (10 L0 layers).
* Required compaction bandwidth: 5.0 GB / 20 seconds = 256 MB/s.
### When do we hit `max_replication_write_lag`?
Depending on how fast compaction and flushes happens, the compute will
backpressure somewhere between `l0_flush_delay_threshold` or
`l0_flush_stall_threshold` + `max_replication_write_lag`.
* Minimum compute backpressure lag: 20 layers * 256 MB + 500 MB = 5.6 GB
* Maximum compute backpressure lag: 40 layers * 256 MB + 500 MB = 10.0
GB
This seems like a reasonable range to me.
This reapplies #10135. Just removing this flush backpressure without
further mitigations caused read amp increases during bulk ingestion
(predictably), so it was reverted. We will replace it by
compaction-based backpressure.
## Problem
In #8550, we made the flush loop wait for uploads after every layer.
This was to avoid unbounded buildup of uploads, and to reduce compaction
debt. However, the approach has several problems:
* It prevents upload parallelism.
* It prevents flush and upload pipelining.
* It slows down ingestion even when there is no need to backpressure.
* It does not directly backpressure based on compaction debt and read
amplification.
We will instead implement compaction-based backpressure in a PR
immediately following this removal (#5415).
Touches #5415.
Touches #10095.
## Summary of changes
Remove waiting on the upload queue in the flush loop.
## Problem
If gc-compaction decides to rewrite an image layer, it will now cause
index_part to lose reference to that layer. In details,
* Assume there's only one image layer of key 0000...AAAA at LSN 0x100
and generation 0xA in the system.
* gc-compaction kicks in at gc-horizon 0x100, and then produce
0000...AAAA at LSN 0x100 and generation 0xB.
* It submits a compaction result update into the index part that unlinks
0000-AAAA-100-A and adds 0000-AAAA-100-B
On the remote storage / local disk side, this is fine -- it unlinks
things correctly and uploads the new file. However, the
`index_part.json` itself doesn't record generations. The buggy procedure
is as follows:
1. upload the new file
2. update the index part to remove the old file and add the new file
3. remove the new file
Therefore, the correct update result process for gc-compaction should be
as follows:
* When modifying the layer map, delete the old one and upload the new
one.
* When updating the index, uploading the new one in the index without
deleting the old one.
## Summary of changes
* Modify `finish_gc_compaction` to correctly order insertions and
deletions.
* Update the way gc-compaction uploads the layer files.
* Add new tests.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
Sometimes, especially when the host running the tests is overloaded, we
can run into reconcile timeouts in
`test_timeline_ancestor_detach_idempotent_success`, making the test
flaky. By increasing the timeouts from 30 seconds to 120 seconds, we can
address the flakiness.
Fixes#10464
## Problem
Currently, the report does not contain the LFC state of the failed
tests.
## Summary of changes
Added the LFC state to the link to the allure report.
---------
Co-authored-by: Alexander Bayandin <alexander@neon.tech>
Drop logical replication subscribers
before compute starts on a non-main branch.
Add new compute_ctl spec flag: drop_subscriptions_before_start
If it is set, drop all the subscriptions from the compute node
before it starts.
To avoid race on compute start, use new GUC
neon.disable_logical_replication_subscribers
to temporarily disable logical replication workers until we drop the
subscriptions.
Ensure that we drop subscriptions exactly once when endpoint starts on a
new branch.
It is essential, because otherwise, we may drop not only inherited, but
newly created subscriptions.
We cannot rely only on spec.drop_subscriptions_before_start flag,
because if for some reason compute restarts inside VM,
it will start again with the same spec and flag value.
To handle this, we save the fact of the operation in the database
in the neon.drop_subscriptions_done table.
If the table does not exist, we assume that the operation was never
performed, so we must do it.
If table exists, we check if the operation was performed on the current
timeline.
fixes: https://github.com/neondatabase/neon/issues/8790
## Problem
Not really a bug fix, but hopefully can reproduce
https://github.com/neondatabase/neon/issues/10482 more.
If the layer map does not contain layers that end at exactly the end
range of the compaction job, the current split algorithm will produce
the last job that ends at the maximum layer key. This patch extends it
all the way to the compaction job end key.
For example, the user requests a compaction of 0000...FFFF. However, we
only have a layer 0000..3000 in the layer map, and the split job will
have a range of 0000..3000 instead of 0000..FFFF.
This is not a correctness issue but it would be better to fix it so that
we can get consistent job splits.
## Summary of changes
Compaction job split will always cover the full specified key range.
Signed-off-by: Alex Chi Z <chi@neon.tech>
## Problem
PR #10457 was supposed to fix the flakiness of
`test_scrubber_physical_gc_ancestors`, but instead it made it even more
flaky. However, the original error causes disappeared, now to be
replaced by key not found errors.
See this for a longer explanation:
https://github.com/neondatabase/neon/issues/10391#issuecomment-2608018967
## Solution
This does one churn rows after all compactions, and before we do any
timeline gc's. That way, we remain more accessible at older lsn's.
## Refs
- Epic: https://github.com/neondatabase/neon/issues/9378
Co-authored-by: Vlad Lazar <vlad@neon.tech>
Co-authored-by: Christian Schwarz <christian@neon.tech>
## Problem
The read path does its IOs sequentially.
This means that if N values need to be read to reconstruct a page,
we will do N IOs and getpage latency is `O(N*IoLatency)`.
## Solution
With this PR we gain the ability to issue IO concurrently within one
layer visit **and** to move on to the next layer without waiting for IOs
from the previous visit to complete.
This is an evolved version of the work done at the Lisbon hackathon,
cf https://github.com/neondatabase/neon/pull/9002.
## Design
### `will_init` now sourced from disk btree index keys
On the algorithmic level, the only change is that the
`get_values_reconstruct_data`
now sources `will_init` from the disk btree index key (which is
PS-page_cache'd), instead
of from the `Value`, which is only available after the IO completes.
### Concurrent IOs, Submission & Completion
To separate IO submission from waiting for its completion, while
simultaneously
feature-gating the change, we introduce the notion of an `IoConcurrency`
struct
through which IO futures are "spawned".
An IO is an opaque future, and waiting for completions is handled
through
`tokio::sync::oneshot` channels.
The oneshot Receiver's take the place of the `img` and `records` fields
inside `VectoredValueReconstructState`.
When we're done visiting all the layers and submitting all the IOs along
the way
we concurrently `collect_pending_ios` for each value, which means
for each value there is a future that awaits all the oneshot receivers
and then calls into walredo to reconstruct the page image.
Walredo is now invoked concurrently for each value instead of
sequentially.
Walredo itself remains unchanged.
The spawned IO futures are driven to completion by a sidecar tokio task
that
is separate from the task that performs all the layer visiting and
spawning of IOs.
That tasks receives the IO futures via an unbounded mpsc channel and
drives them to completion inside a `FuturedUnordered`.
(The behavior from before this PR is available through
`IoConcurrency::Sequential`,
which awaits the IO futures in place, without "spawning" or "submitting"
them
anywhere.)
#### Alternatives Explored
A few words on the rationale behind having a sidecar *task* and what
alternatives were considered.
One option is to queue up all IO futures in a FuturesUnordered that is
polled
the first time when we `collect_pending_ios`.
Firstly, the IO futures are opaque, compiler-generated futures that need
to be polled at least once to submit their IO. "At least once" because
tokio-epoll-uring may not be able to submit the IO to the kernel on
first
poll right away.
Second, there are deadlocks if we don't drive the IO futures to
completion
independently of the spawning task.
The reason is that both the IO futures and the spawning task may hold
some
_and_ try to acquire _more_ shared limited resources.
For example, both spawning task and IO future may try to acquire
* a VirtualFile file descriptor cache slot async mutex (observed during
impl)
* a tokio-epoll-uring submission slot (observed during impl)
* a PageCache slot (currently this is not the case but we may move more
code into the IO futures in the future)
Another option is to spawn a short-lived `tokio::task` for each IO
future.
We implemented and benchmarked it during development, but found little
throughput improvement and moderate mean & tail latency degradation.
Concerns about pressure on the tokio scheduler made us discard this
variant.
The sidecar task could be obsoleted if the IOs were not arbitrary code
but a well-defined struct.
However,
1. the opaque futures approach taken in this PR allows leaving the
existing
code unchanged, which
2. allows us to implement the `IoConcurrency::Sequential` mode for
feature-gating
the change.
Once the new mode sidecar task implementation is rolled out everywhere,
and `::Sequential` removed, we can think about a descriptive submission
& completion interface.
The problems around deadlocks pointed out earlier will need to be solved
then.
For example, we could eliminate VirtualFile file descriptor cache and
tokio-epoll-uring slots.
The latter has been drafted in
https://github.com/neondatabase/tokio-epoll-uring/pull/63.
See the lengthy doc comment on `spawn_io()` for more details.
### Error handling
There are two error classes during reconstruct data retrieval:
* traversal errors: index lookup, move to next layer, and the like
* value read IO errors
A traversal error fails the entire get_vectored request, as before this
PR.
A value read error only fails that value.
In any case, we preserve the existing behavior that once
`get_vectored` returns, all IOs are done. Panics and failing
to poll `get_vectored` to completion will leave the IOs dangling,
which is safe but shouldn't happen, and so, a rate-limited
log statement will be emitted at warning level.
There is a doc comment on `collect_pending_ios` giving more code-level
details and rationale.
### Feature Gating
The new behavior is opt-in via pageserver config.
The `Sequential` mode is the default.
The only significant change in `Sequential` mode compared to before
this PR is the buffering of results in the `oneshot`s.
## Code-Level Changes
Prep work:
* Make `GateGuard` clonable.
Core Feature:
* Traversal code: track `will_init` in `BlobMeta` and source it from
the Delta/Image/InMemory layer index, instead of determining `will_init`
after we've read the value. This avoids having to read the value to
determine whether traversal can stop.
* Introduce `IoConcurrency` & its sidecar task.
* `IoConcurrency` is the clonable handle.
* It connects to the sidecar task via an `mpsc`.
* Plumb through `IoConcurrency` from high level code to the
individual layer implementations' `get_values_reconstruct_data`.
We piggy-back on the `ValuesReconstructState` for this.
* The sidecar task should be long-lived, so, `IoConcurrency` needs
to be rooted up "high" in the call stack.
* Roots as of this PR:
* `page_service`: outside of pagestream loop
* `create_image_layers`: when it is called
* `basebackup`(only auxfiles + replorigin + SLRU segments)
* Code with no roots that uses `IoConcurrency::sequential`
* any `Timeline::get` call
* `collect_keyspace` is a good example
* follow-up: https://github.com/neondatabase/neon/issues/10460
* `TimelineAdaptor` code used by the compaction simulator, unused in
practive
* `ingest_xlog_dbase_create`
* Transform Delta/Image/InMemoryLayer to
* do their values IO in a distinct `async {}` block
* extend the residence of the Delta/Image layer until the IO is done
* buffer their results in a `oneshot` channel instead of straight
in `ValuesReconstructState`
* the `oneshot` channel is wrapped in `OnDiskValueIo` /
`OnDiskValueIoWaiter`
types that aid in expressiveness and are used to keep track of
in-flight IOs so we can print warnings if we leave them dangling.
* Change `ValuesReconstructState` to hold the receiving end of the
`oneshot` channel aka `OnDiskValueIoWaiter`.
* Change `get_vectored_impl` to `collect_pending_ios` and issue walredo
concurrently, in a `FuturesUnordered`.
Testing / Benchmarking:
* Support queue-depth in pagebench for manual benchmarkinng.
* Add test suite support for setting concurrency mode ps config
field via a) an env var and b) via NeonEnvBuilder.
* Hacky helper to have sidecar-based IoConcurrency in tests.
This will be cleaned up later.
More benchmarking will happen post-merge in nightly benchmarks, plus in
staging/pre-prod.
Some intermediate helpers for manual benchmarking have been preserved in
https://github.com/neondatabase/neon/pull/10466 and will be landed in
later PRs.
(L0 layer stack generator!)
Drive-By:
* test suite actually didn't enable batching by default because
`config.compatibility_neon_binpath` is always Truthy in our CI
environment
=> https://neondb.slack.com/archives/C059ZC138NR/p1737490501941309
* initial logical size calculation wasn't always polled to completion,
which was
surfaced through the added WARN logs emitted when dropping a
`ValuesReconstructState` that still has inflight IOs.
* remove the timing histograms
`pageserver_getpage_get_reconstruct_data_seconds`
and `pageserver_getpage_reconstruct_seconds` because with planning,
value read
IO, and walredo happening concurrently, one can no longer attribute
latency
to any one of them; we'll revisit this when Vlad's work on
tracing/sampling
through RequestContext lands.
* remove code related to `get_cached_lsn()`.
The logic around this has been dead at runtime for a long time,
ever since the removal of the materialized page cache in #8105.
## Testing
Unit tests use the sidecar task by default and run both modes in CI.
Python regression tests and benchmarks also use the sidecar task by
default.
We'll test more in staging and possibly preprod.
# Future Work
Please refer to the parent epic for the full plan.
The next step will be to fold the plumbing of IoConcurrency
into RequestContext so that the function signatures get cleaned up.
Once `Sequential` isn't used anymore, we can take the next
big leap which is replacing the opaque IOs with structs
that have well-defined semantics.
---------
Co-authored-by: Christian Schwarz <christian@neon.tech>
## Problem
PR #9993 was supposed to enable `page_service_pipelining` by default for
all `NeonEnv`s, but this was ineffective in our CI environment.
Thus, CI Python-based tests and benchmarks, unless explicitly
configuring pipelining, were still using serial protocol handling.
## Analysis
The root cause was that in our CI environment,
`config.compatibility_neon_binpath` is always Truthy.
It's not in local environments, which is why this slipped through in
local testing.
Lesson: always add a log line ot pageserver startup and spot-check tests
to ensure the intended default is picked up.
## Summary of changes
Fix it. Since enough time has passed, the compatiblity snapshot contains
a recent enough software version so we don't need to worry about
`compatibility_neon_binpath` anymore.
## Future Work
The question how to add a new default except for compatibliity tests,
which is what the broken code was supposed to do, is still unsolved.
Slack discussion:
https://neondb.slack.com/archives/C059ZC138NR/p1737490501941309
## Problem
part of https://github.com/neondatabase/neon/issues/9114
The automatic trigger is already implemented at
https://github.com/neondatabase/neon/pull/10221 but I need to write some
tests and finish my experiments in staging before I can merge it with
confidence. Given that I have some other patches that will modify the
config items, I'd like to get the config items merged first to reduce
conflicts.
## Summary of changes
* add `l2_lsn` to index_part.json -- below that LSN, data have been
processed by gc-compaction
* add a set of gc-compaction auto trigger control items into the config
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
We did not have any tests on fast_import binary yet.
In this PR I have introduced:
- `FastImport` class and tools for testing in python
- basic test that runs fast import against vanilla postgres and checks
that data is there
Should be merged after https://github.com/neondatabase/neon/pull/10251
We currently have some flakiness in
`test_scrubber_physical_gc_ancestors`, see #10391.
The first flakiness kind is about the reconciler not actually becoming
idle within the timeout of 30 seconds. We see continuous forward
progress so this is likely not a hang. We also see this happen in
parallel to a test failure, so is likely due to runners being
overloaded. Therefore, we increase the timeout.
The second flakiness kind is an assertion failure. This one is a little
bit more tricky, but we saw in the successful run that there was some
advance of the lsn between the compaction ran (which created layer
files) and the gc run. Apparently gc rejects reductions to the single
image layer setting if the cutoff lsn is the same as the lsn of the
image layer: it will claim that that layer is newer than the space
cutoff and therefore skip it, while thinking the old layer (that we want
to delete) is the latest one (so it's not deleted).
We address the second flakiness kind by inserting a tiny amount of WAL
between the compaction and gc. This should hopefully fix things.
Related issue: #10391
(not closing it with the merger of the PR as we'll need to validate that
these changes had the intended effect).
Thanks to Chi for going over this together with me in a call.
Otherwise we might hit ERRORs in otherwise safe situations (such as user
queries), which isn't a great user experience.
## Problem
https://github.com/neondatabase/neon/pull/10376
## Summary of changes
Instead of accepting internal errors as acceptable, we ensure we don't
exceed our allocated usage.
# Refs
- fixes https://github.com/neondatabase/neon/issues/10309
- fixup of batching design, first introduced in
https://github.com/neondatabase/neon/pull/9851
- refinement of https://github.com/neondatabase/neon/pull/8339
# Problem
`Tenant::shutdown` was occasionally taking many minutes (sometimes up to
20) in staging and prod if the
`page_service_pipelining.mode="concurrent-futures"` is enabled.
# Symptoms
The issue happens during shard migration between pageservers.
There is page_service unavailability and hence effectively downtime for
customers in the following case:
1. The source (state `AttachedStale`) gets stuck in `Tenant::shutdown`,
waiting for the gate to close.
2. Cplane/Storcon decides to transition the target `AttachedMulti` to
`AttachedSingle`.
3. That transition comes with a bump of the generation number, causing
the `PUT .../location_config` endpoint to do a full `Tenant::shutdown` /
`Tenant::attach` cycle for the target location.
4. That `Tenant::shutdown` on the target gets stuck, waiting for the
gate to close.
5. Eventually the gate closes (`close completed`), correlating with a
`page_service` connection handler logging that it's exiting because of a
network error (`Connection reset by peer` or `Broken pipe`).
While in (4):
- `Tenant::shutdown` is stuck waiting for all `Timeline::shutdown` calls
to complete.
So, really, this is a `Timeline::shutdown` bug.
- retries from Cplane/Storcon to complete above state transitions, fail
with errors related to the tenant mgr slot being in state
`TenantSlot::InProgress`, the tenant state being
`TenantState::Stopping`, and the timelines being in
`TimelineState::Stopping`, and the `Timeline::cancel` being cancelled.
- Existing (and/or new?) page_service connections log errors `error
reading relation or page version: Not found: Timed out waiting 30s for
tenant active state. Latest state: None`
# Root-Cause
After a lengthy investigation ([internal
write-up](https://www.notion.so/neondatabase/2025-01-09-batching-deadlock-Slow-Log-Analysis-in-Staging-176f189e00478050bc21c1a072157ca4?pvs=4))
I arrived at the following root cause.
The `spsc_fold` channel (`batch_tx`/`batch_rx`) that connects the
Batcher and Executor stages of the pipelined mode was storing a `Handle`
and thus `GateGuard` of the Timeline that was not shutting down.
The design assumption with pipelining was that this would always be a
short transient state.
However, that was incorrect: the Executor was stuck on writing/flushing
an earlier response into the connection to the client, i.e., socket
write being slow because of TCP backpressure.
The probable scenario of how we end up in that case:
1. Compute backend process sends a continuous stream of getpage prefetch
requests into the connection, but never reads the responses (why this
happens: see Appendix section).
2. Batch N is processed by Batcher and Executor, up to the point where
Executor starts flushing the response.
3. Batch N+1 is procssed by Batcher and queued in the `spsc_fold`.
4. Executor is still waiting for batch N flush to finish.
5. Batcher eventually hits the `TimeoutReader` error (10min).
From here on it waits on the
`spsc_fold.send(Err(QueryError(TimeoutReader_error)))`
which will never finish because the batch already inside the `spsc_fold`
is not
being read by the Executor, because the Executor is still stuck in the
flush.
(This state is not observable at our default `info` log level)
6. Eventually, Compute backend process is killed (`close()` on the
socket) or Compute as a whole gets killed (probably no clean TCP
shutdown happening in that case).
7. Eventually, Pageserver TCP stack learns about (6) through RST packets
and the Executor's flush() call fails with an error.
8. The Executor exits, dropping `cancel_batcher` and its end of the
spsc_fold.
This wakes Batcher, causing the `spsc_fold.send` to fail.
Batcher exits.
The pipeline shuts down as intended.
We return from `process_query` and log the `Connection reset by peer` or
`Broken pipe` error.
The following diagram visualizes the wait-for graph at (5)
```mermaid
flowchart TD
Batcher --spsc_fold.send(TimeoutReader_error)--> Executor
Executor --flush batch N responses--> socket.write_end
socket.write_end --wait for TCP window to move forward--> Compute
```
# Analysis
By holding the GateGuard inside the `spsc_fold` open, the pipelining
implementation
violated the principle established in
(https://github.com/neondatabase/neon/pull/8339).
That is, that `Handle`s must only be held across an await point if that
await point
is sensitive to the `<Handle as Deref<Target=Timeline>>::cancel` token.
In this case, we were holding the Handle inside the `spsc_fold` while
awaiting the
`pgb_writer.flush()` future.
One may jump to the conclusion that we should simply peek into the
spsc_fold to get
that Timeline cancel token and be sensitive to it during flush, then.
But that violates another principle of the design from
https://github.com/neondatabase/neon/pull/8339.
That is, that the page_service connection lifecycle and the Timeline
lifecycles must be completely decoupled.
Tt must be possible to shut down one shard without shutting down the
page_service connection, because on that single connection we might be
serving other shards attached to this pageserver.
(The current compute client opens separate connections per shard, but,
there are plans to change that.)
# Solution
This PR adds a `handle::WeakHandle` struct that does _not_ hold the
timeline gate open.
It must be `upgrade()`d to get a `handle::Handle`.
That `handle::Handle` _does_ hold the timeline gate open.
The batch queued inside the `spsc_fold` only holds a `WeakHandle`.
We only upgrade it while calling into the various `handle_` methods,
i.e., while interacting with the `Timeline` via `<Handle as
Deref<Target=Timeline>>`.
All that code has always been required to be (and is!) sensitive to
`Timeline::cancel`, and therefore we're guaranteed to bail from it
quickly when `Timeline::shutdown` starts.
We will drop the `Handle` immediately, before we start
`pgb_writer.flush()`ing the responses.
Thereby letting go of our hold on the `GateGuard`, allowing the timeline
shutdown to complete while the page_service handler remains intact.
# Code Changes
* Reproducer & Regression Test
* Developed and proven to reproduce the issue in
https://github.com/neondatabase/neon/pull/10399
* Add a `Test` message to the pagestream protocol (`cfg(feature =
"testing")`).
* Drive-by minimal improvement to the parsing code, we now have a
`PagestreamFeMessageTag`.
* Refactor `pageserver/client` to allow sending and receiving
`page_service` requests independently.
* Add a Rust helper binary to produce situation (4) from above
* Rationale: (4) and (5) are the same bug class, we're holding a gate
open while `flush()`ing.
* Add a Python regression test that uses the helper binary to
demonstrate the problem.
* Fix
* Introduce and use `WeakHandle` as explained earlier.
* Replace the `shut_down` atomic with two enum states for `HandleInner`,
wrapped in a `Mutex`.
* To make `WeakHandle::upgrade()` and `Handle::downgrade()`
cache-efficient:
* Wrap the `Types::Timeline` in an `Arc`
* Wrap the `GateGuard` in an `Arc`
* The separate `Arc`s enable uncontended cloning of the timeline
reference in `upgrade()` and `downgrade()`.
If instead we were `Arc<Timeline>::clone`, different connection handlers
would be hitting the same cache line on every upgrade()/downgrade(),
causing contention.
* Please read the udpated module-level comment in `mod handle`
module-level comment for details.
# Testing & Performance
The reproducer test that failed before the changes now passes, and
obviously other tests are passing as well.
We'll do more testing in staging, where the issue happens every ~4h if
chaos migrations are enabled in storcon.
Existing perf testing will be sufficient, no perf degradation is
expected.
It's a few more alloctations due to the added Arc's, but, they're low
frequency.
# Appendix: Why Compute Sometimes Doesn't Read Responses
Remember, the whole problem surfaced because flush() was slow because
Compute was not reading responses. Why is that?
In short, the way the compute works, it only advances the page_service
protocol processing when it has an interest in data, i.e., when the
pagestore smgr is called to return pages.
Thus, if compute issues a bunch of requests as part of prefetch but then
it turns out it can service the query without reading those pages, it
may very well happen that these messages stay in the TCP until the next
smgr read happens, either in that session, or possibly in another
session.
If there’s too many unread responses in the TCP, the pageserver kernel
is going to backpressure into userspace, resulting in our stuck flush().
All of this stems from the way vanilla Postgres does prefetching and
"async IO":
it issues `fadvise()` to make the kernel do the IO in the background,
buffering results in the kernel page cache.
It then consumes the results through synchronous `read()` system calls,
which hopefully will be fast because of the `fadvise()`.
If it turns out that some / all of the prefetch results are not needed,
Postgres will not be issuing those `read()` system calls.
The kernel will eventually react to that by reusing page cache pages
that hold completed prefetched data.
Uncompleted prefetch requests may or may not be processed -- it's up to
the kernel.
In Neon, the smgr + Pageserver together take on the role of the kernel
in above paragraphs.
In the current implementation, all prefetches are sent as GetPage
requests to Pageserver.
The responses are only processed in the places where vanilla Postgres
would do the synchronous `read()` system call.
If we never get to that, the responses are queued inside the TCP
connection, which, once buffers run full, will backpressure into
Pageserver's sending code, i.e., the `pgb_writer.flush()` that was the
root cause of the problems we're fixing in this PR.
## Problem
`test_storage_controller_node_deletion` sometimes failed because shards
were moving around during timeline creation, and neon_local isn't
tolerant of that. The movements were unexpected because the shards had
only just been created.
This was a regression from #9916Closes: #10383
## Summary of changes
- Make this test use multiple AZs -- this makes the storage controller's
scheduling reliably stable
Why this works: in #9916 , I made a simplifying assumption that we would
have multiple AZs to get nice stable scheduling -- it's much easier,
because each tenant has a well defined primary+secondary location when
they have an AZ preference and nodes have different AZs. Everything
still works if you don't have multiple AZs, but you just have this quirk
that sometimes the optimizer can disagree with initial scheduling, so
once in a while a shard moves after being created -- annoying for tests,
harmless IRL.
## Problem
All pageserver have the same application name which makes it hard to
distinguish them.
## Summary of changes
Include the node id in the application name sent to the safekeeper. This
should gives us
more visibility in logs. There's a few metrics that will increase in
cardinality by `pageserver_count`,
but that's fine.
Rename the safekeeper scheduling policy "disabled" to "pause".
A rename was requested in
https://github.com/neondatabase/neon/pull/10400#discussion_r1916259124,
as the "disabled" policy is meant to be analogous to the "pause" policy
for pageservers.
Also simplify the `SkSchedulingPolicyArg::from_str` function, relying on
the `from_str` implementation of `SkSchedulingPolicy`. Latter is used
for the database format as well, so it is quite stable. If we ever want
to change the UI, we'll need to duplicate the function again but this is
cheap.
## Problem
Threads spawned in `test_tenant_delete_races_timeline_creation` are not
joined before the test ends, and can generate
`PytestUnhandledThreadExceptionWarning` in other tests.
https://neon-github-public-dev.s3.amazonaws.com/reports/pr-10419/12805365523/index.html#/testresult/53a72568acd04dbd
## Summary of changes
- Wrap threads in ThreadPoolExecutor which will join them before the
test ends
- Remove a spurious deletion call -- the background thread doing
deletion ought to succeed.
This should fix the largest source of flakyness of
test_nbtree_pagesplit_cycleid.
## Problem
https://github.com/neondatabase/neon/issues/10390
## Summary of changes
By using a guaranteed-flushed LSN, we ensure that PS won't have to wait
forever.
(If it does wait forever, we know the issue can't be with Compute's WAL)
## Problem
part of https://github.com/neondatabase/neon/issues/9114
part of investigation of
https://github.com/neondatabase/neon/issues/10049
## Summary of changes
* If `cfg!(test) or cfg!(feature = testing)`, then we will always try
generating an image to ensure the history is replayable, but not put the
image layer into the final layer results, therefore discovering wrong
key history before we hit a read error.
* I suspect it's easier to trigger some races if gc-compaction is
continuously run on a timeline, so I increased the frequency to twice
per 10 churns.
* Also, create branches in gc-compaction smoke tests to get more test
coverage.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
Co-authored-by: Arpad Müller <arpad@neon.tech>
Implementing the last missing endpoint of #9981, this adds support to
set the scheduling policy of an individual safekeeper, as specified in
the RFC. However, unlike in the RFC we call the endpoint
`scheduling_policy` not `status`
Closes#9981.
As for why not use the upsert endpoint for this: we want to have the
safekeeper upsert endpoint be used for testing and for deploying new
safekeepers, but not for changes of the scheduling policy. We don't want
to change any of the other fields when marking a safekeeper as
decommissioned for example, so we'd have to first fetch them only to
then specify them again. Of course one can also design an endpoint where
one can omit any field and it doesn't get modified, but it's still not
great for observability to put everything into one big "change something
about this safekeeper" endpoint.
## Problem
https://github.com/neondatabase/neon/issues/9965
## Summary of changes
Add to safekeeper http endpoint to switch membership configuration. Also
add it to python client for tests, and add simple test itself.
## Problem
https://github.com/neondatabase/neon/issues/9965
## Summary of changes
Add safekeeper membership configuration struct itself and storing it in
the control file. In passing also add creation timestamp to the control
file (there were cases where I wanted it in the past).
Remove obsolete unused PersistedPeerInfo struct from control file (still
keep it control_file_upgrade.rs to have it in old upgrade code).
Remove the binary representation of cfile in the roundtrip test.
Updating it is annoying, and we still test the actual roundtrip.
Also add configuration to timeline creation http request, currently used
only in one python test. In passing, slightly change LSNs meaning in the
request: normally start_lsn is passed (the same as ancestor_start_lsn in
similar pageserver call), but we allow specifying higher commit_lsn for
manual intervention if needed. Also when given LSN initialize
term_history with it.
## Problem
For large deployments, the `control/v1/tenant` listing API can time out
transmitting a monolithic serialized response.
## Summary of changes
- Add `limit` and `start_after` parameters to listing API
- Update storcon_cli to use these parameters and limit requests to 1000
items at a time
