## Problem
- When a client requests a key that isn't found in any shard on the node
(edge case that only happens if a compute's config is out of date), we
should prompt them to reconnect (as this includes a backoff), since they
will not be able to complete the request until they eventually get a
correct pageserver connection string.
- QueryError::Other is used excessively: this contains a type-ambiguous
anyhow::Error and is logged very verbosely (including backtrace).
## Summary of changes
- Introduce PageStreamError to replace use of anyhow::Error in request
handlers for getpage, etc.
- Introduce Reconnect and NotFound variants to QueryError
- Map the "shard routing error" case to PageStreamError::Reconnect ->
QueryError::Reconnect
- Update type conversions for LSN timeouts and tenant/timeline not found
errors to use PageStreamError::NotFound->QueryError::NotFound
- add pgbouncer_settings section to compute spec;
- add pgbouncer-connstr option to compute_ctl.
- add pgbouncer-ini-path option to compute_ctl. Default: /etc/pgbouncer/pgbouncer.ini
Apply pgbouncer config on compute start and respec to override default spec.
Save pgbouncer config updates to pgbouncer.ini to preserve them across pgbouncer restarts.
Remove confirm_wal_streamed; we already apply both write and flush positions of
the slot to commit_lsn which is fine because 1) we need to wake up waiters 2)
committed WAL can be fetched from safekeepers by neon_walreader now.
wp -> sk communication now uses neon_walreader which will fetch missing WAL on
demand from safekeepers, so doesn't need this anymore. Also, cap WAL download by
max_slot_wal_keep_size to be able to start compute if lag is too high.
Store the content of the `last-modified` and `etag` HTTP headers in
`Download`.
This serves both as the first step towards #6199 and as a preparation
for tests in #6155 .
This PR adds a component-level benchmarking utility for pageserver.
Its name is `pagebench`.
The problem solved by `pagebench` is that we want to put Pageserver
under high load.
This isn't easily achieved with `pgbench` because it needs to go through
a compute, which has signficant performance overhead compared to
accessing Pageserver directly.
Further, compute has its own performance optimizations (most
importantly: caches). Instead of designing a compute-facing workload
that defeats those internal optimizations, `pagebench` simply bypasses
them by accessing pageserver directly.
Supported benchmarks:
* getpage@latest_lsn
* basebackup
* triggering logical size calculation
This code has no automated users yet.
A performance regression test for getpage@latest_lsn will be added in a
later PR.
part of https://github.com/neondatabase/neon/issues/5771
Allows usage via `aws sso login --profile=<p>; AWS_PROFILE=<p>`. Now
there is no need to manually configure things any more via
`SSO_ACCOUNT_ID` and others. Now one can run the tests locally (given
Neon employee access to aws):
```
aws sso login --profile dev
export ENABLE_REAL_S3_REMOTE_STORAGE=nonempty REMOTE_STORAGE_S3_REGION=eu-central-1 REMOTE_STORAGE_S3_BUCKET=neon-github-public-dev AWS_PROFILE=dev
cargo test -p remote_storage -j 1 s3 -- --nocapture
```
Also makes the scrubber use the same region for auth that it does its
operations in (not touching the hard coded role name and start_url
values here, they are not ideal though).
## Problem
Currently a chart of S3 error rate is misleading: it can show errors any
time we are attaching a tenant (probing for index_part generation,
checking for remote delete marker).
Considering 404 successful isn't perfectly elegant, but it enables the
error rate to be used a a more meaningful alert signal: it would
indicate if we were having auth issues, sending bad requests, getting
throttled ,etc.
## Summary of changes
Track 404 requests in the AttemptOutcome::Ok bucket instead of the
AttemptOutcome::Err bucket.
This is a precursor to:
- https://github.com/neondatabase/neon/pull/6185
While that PR contains big changes to neon_local and attachment_service,
this PR contains a few unrelated standalone changes generated while
working on that branch:
- Fix restarting a pageserver when it contains multiple shards for the
same tenant
- When using location_config api to attach a tenant, create its
timelines dir
- Update test paths where generations were previously optional to make
them always-on: this avoids tests having to spuriously assert that
attachment_service is not None in order to make the linter happy.
- Add a TenantShardId python implementation for subsequent use in test
helpers that will be made shard-aware
- Teach scrubber to read across shards when checking for layer
existence: this is a refactor to track the list of existent layers at
tenant-level rather than locally to each timeline. This is a precursor
to testing shard splitting.
Part of getpage@lsn benchmark epic:
https://github.com/neondatabase/neon/issues/5771
This allows getting the list of tenants and timelines without triggering
initial logical size calculation by requesting the timeline details API
response, which would skew our results.
The PR does two things:
* move the util functions present in the remote_storage Azure and S3
test files into a shared one, deduplicating them.
* add a `s3_upload_download_works` test as a copy of the Azure test
The goal is mainly to fight duplication and make the code a little bit
more generic (like removing mentions of s3 and azure from function
names).
This is a first step towards #6146.
- No need to include c.h, port.h or pg_config.h, they are included in
postgres.h
- No need to include postgres.h in header files. Instead, the
assumption in PostgreSQL is that all .c files include postgres.h.
- Reorder includes to alphabetical order, and system headers before
pgsql headers
- Remove bunch of other unnecessary includes that got copy-pasted from
one source file to another
## Problem
Various places in remote storage were not subject to a timeout (thereby
stuck TCP connections could hold things up), and did not respect a
cancellation token (so things like timeline deletion or tenant detach
would have to wait arbitrarily long).
## Summary of changes
- Add download_cancellable and upload_cancellable helpers, and use them
in all the places we wait for remote storage operations (with the
exception of initdb downloads, where it would not have been safe).
- Add a cancellation token arg to `download_retry`.
- Use cancellation token args in various places that were missing one
per #5066Closes: #5066
Why is this only "basic" handling?
- Doesn't express difference between shutdown and errors in return
types, to avoid refactoring all the places that use an anyhow::Error
(these should all eventually return a more structured error type)
- Implements timeouts on top of remote storage, rather than within it:
this means that operations hitting their timeout will lose their
semaphore permit and thereby go to the back of the queue for their
retry.
- Doing a nicer job is tracked in
https://github.com/neondatabase/neon/issues/6096
Part of getpage@lsn benchmark epic:
https://github.com/neondatabase/neon/issues/5771
This PR moves the control plane's spread-all-over-the-place client for
the pageserver management API into a separate module within the
pageserver crate.
I need that client to be async in my benchmarking work, so, this PR
switches to the async version of `reqwest`.
That is also the right direction generally IMO.
The switch to async in turn mandated converting most of the
`control_plane/` code to async.
Note that some of the client methods should be taking `TenantShardId`
instead of `TenantId`, but, none of the callers seem to be
sharding-aware.
Leaving that for another time:
https://github.com/neondatabase/neon/issues/6154
Before any json parsing from the http api only returned errors were per
field errors. Now they are done using `serde_path_to_error`, which at
least helped greatly with the `disk_usage_eviction_run` used for
testing. I don't think this can conflict with anything added in #5310.
## Problem
The websockets gauge for active db connections seems to be growing more
than the gauge for client connections over websockets, which does not
make sense.
## Summary of changes
refactor how our counter-pair gauges are represented. not sure if this
will improve the problem, but it should be harder to mess-up the
counters. The API is much nicer though now and doesn't require
scopeguard::defer hacks
Dependency (commits inline):
https://github.com/neondatabase/neon/pull/5842
## Problem
Secondary mode tenants need a manifest of what to download. Ultimately
this will be some kind of heat-scored set of layers, but as a robust
first step we will simply use the set of resident layers: secondary
tenant locations will aim to match the on-disk content of the attached
location.
## Summary of changes
- Add heatmap types representing the remote structure
- Add hooks to Tenant/Timeline for generating these heatmaps
- Create a new `HeatmapUploader` type that is external to `Tenant`, and
responsible for walking the list of attached tenants and scheduling
heatmap uploads.
Notes to reviewers:
- Putting the logic for uploads (and later, secondary mode downloads)
outside of `Tenant` is an opinionated choice, motivated by:
- Enable future smarter scheduling of operations, e.g. uploading the
stalest tenant first, rather than having all tenants compete for a fair
semaphore on a first-come-first-served basis. Similarly for downloads,
we may wish to schedule the tenants with the hottest un-downloaded
layers first.
- Enable accessing upload-related state without synchronization (it
belongs to HeatmapUploader, rather than being some Mutex<>'d part of
Tenant)
- Avoid further expanding the scope of Tenant/Timeline types, which are
already among the largest in the codebase
- You might reasonably wonder how much of the uploader code could be a
generic job manager thing. Probably some of it: but let's defer pulling
that out until we have at least two users (perhaps secondary downloads
will be the second one) to highlight which bits are really generic.
Compromises:
- Later, instead of using digests of heatmaps to decide whether anything
changed, I would prefer to avoid walking the layers in tenants that
don't have changes: tracking that will be a bit invasive, as it needs
input from both remote_timeline_client and Layer.
## Problem
- `shutdown_tasks` would log when a particular task was taking a long
time to shut down, but not when it eventually completed. That left one
uncertain as to whether the slow task was the source of a hang, or just
a precursor.
## Summary of changes
- Add a log line after a slow task shutdown
- Add an equivalent in Gate's `warn_if_stuck`, in case we ever need it.
This isn't related to the original issue but was noticed when checking
through these logging paths.
## Problem
In https://github.com/neondatabase/neon/pull/5957, the most essential
types were updated to use TenantShardId rather than TenantId. That
unblocked other work, but didn't fully enable running multiple shards
from the same tenant on the same pageserver.
## Summary of changes
- Use TenantShardId in page cache key for materialized pages
- Update mgr.rs get_tenant() and list_tenants() functions to use a shard
id, and update all callers.
- Eliminate the exactly_one_or_none helper in mgr.rs and all code that
used it
- Convert timeline HTTP routes to use tenant_shard_id
Note on page cache:
```
struct MaterializedPageHashKey {
/// Why is this TenantShardId rather than TenantId?
///
/// Usually, the materialized value of a page@lsn is identical on any shard in the same tenant. However, this
/// this not the case for certain internally-generated pages (e.g. relation sizes). In future, we may make this
/// key smaller by omitting the shard, if we ensure that reads to such pages always skip the cache, or are
/// special-cased in some other way.
tenant_shard_id: TenantShardId,
timeline_id: TimelineId,
key: Key,
}
```
## Problem
## Summary of changes
## Checklist before requesting a review
- [ ] I have performed a self-review of my code.
- [ ] If it is a core feature, I have added thorough tests.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [ ] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
## Checklist before merging
- [ ] Do not forget to reformat commit message to not include the above
checklist
## Problem
The cancellation code was confusing and error prone (as seen before in
our memory leaks).
## Summary of changes
* Use the new `TaskTracker` primitve instead of JoinSet to gracefully
wait for tasks to shutdown.
* Updated libs/utils/completion to use `TaskTracker`
* Remove `tokio::select` in favour of `futures::future::select` in a
specialised `run_until_cancelled()` helper function
## Problem
Currently, if one creates many shards they will all ingest all the data:
not much use! We want them to ingest a proportional share of the data
each.
Closes: #6025
## Summary of changes
- WalIngest object gets a copy of the ShardIdentity for the Tenant it
was created by.
- While iterating the `blocks` part of a decoded record, blocks that do
not match the current shard are ignored, apart from on shard zero where
they are used to update relation sizes in `observe_decoded_block` (but
not stored).
- Before committing a `DataDirModificiation` from a WAL record, we check
if it's empty, and drop the record if so. This check is necessary
(rather than just looking at the `blocks` part) because certain record
types may modify blocks in non-obvious ways (e.g.
`ingest_heapam_record`).
- Add WAL ingest metrics to record the total received, total committed,
and total filtered out
- Behaviour for unsharded tenants is unchanged: they will continue to
ingest all blocks, and will take the fast path through `is_key_local`
that doesn't bother calculating any hashes.
After this change, shards store a subset of the tenant's total data, and
accurate relation sizes are only maintained on shard zero.
---------
Co-authored-by: Arpad Müller <arpad-m@users.noreply.github.com>
Currently using 8kB buffers, raise that to 32kB to hopefully 1/4 of
`spawn_blocking` usage. Also a drive-by fixing of last `tokio::io::copy`
to `tokio::io::copy_buf`.
There is double buffering in remote_storage and in pageserver for 8KiB
in using `tokio::io::copy` to read `BufReader<ReaderStream<_>>`.
Switches downloads and uploads to use `Stream<Item =
std::io::Result<Bytes>>`. Caller and only caller now handles setting up
buffering. For reading, `Stream<Item = ...>` is also a `AsyncBufRead`,
so when writing to a file, we now have `tokio::io::copy_buf` reading
full buffers and writing them to `tokio::io::BufWriter` which handles
the buffering before dispatching over to `tokio::fs::File`.
Additionally implements streaming uploads for azure. With azure
downloads are a bit nicer than before, but not much; instead of one huge
vec they just hold on to N allocations we got over the wire.
This PR will also make it trivial to switch reading and writing to
io-uring based methods.
Cc: #5563.
## Problem
Some existing tests are written in a way that's incompatible with tenant
generations.
## Summary of changes
Update all the tests that need updating: this is things like calling
through the NeonPageserver.tenant_attach helper to get a generation
number, instead of calling directly into the pageserver API. There are
various more subtle cases.
The gc_timeline() function is async, but it calls the synchronous wait()
function. In the worst case, that could lead to a deadlock by using up
all tokio executor threads.
In the passing, fix a few typos in comments.
Fixes issue #6045.
---------
Co-authored-by: Joonas Koivunen <joonas@neon.tech>
to_string forces allocating a less than pointer sized string (costing on
stack 4 usize), using a Display formattable slug saves that. the
difference seems small, but at the same time, we log these a lot.
## Problem
When a pageserver receives a page service request identified by
TenantId, it must decide which `Tenant` object to route it to.
As in earlier PRs, this stuff is all a no-op for tenants with a single
shard: calls to `is_key_local` always return true without doing any
hashing on a single-shard ShardIdentity.
Closes: https://github.com/neondatabase/neon/issues/6026
## Summary of changes
- Carry immutable `ShardIdentity` objects in Tenant and Timeline. These
provide the information that Tenants/Timelines need to figure out which
shard is responsible for which Key.
- Augment `get_active_tenant_with_timeout` to take a `ShardSelector`
specifying how the shard should be resolved for this tenant. This mode
depends on the kind of request (e.g. basebackups always go to shard
zero).
- In `handle_get_page_at_lsn_request`, handle the case where the
Timeline we looked up at connection time is not the correct shard for
the page being requested. This can happen whenever one node holds
multiple shards for the same tenant. This is currently written as a
"slow path" with the optimistic expectation that usually we'll run with
one shard per pageserver, and the Timeline resolved at connection time
will be the one serving page requests. There is scope for optimization
here later, to avoid doing the full shard lookup for each page.
- Omit consumption metrics from nonzero shards: only the 0th shard is
responsible for tracing accurate relation sizes.
Note to reviewers:
- Testing of these changes is happening separately on the
`jcsp/sharding-pt1` branch, where we have hacked neon_local etc needed
to run a test_pg_regress.
- The main caveat to this implementation is that page service
connections still look up one Timeline when the connection is opened,
before they know which pages are going to be read. If there is one shard
per pageserver then this will always also be the Timeline that serves
page requests. However, if multiple shards are on one pageserver then
get page requests will incur the cost of looking up the correct Timeline
on each getpage request. We may look to improve this in future with a
"sticky" timeline per connection handler so that subsequent requests for
the same Timeline don't have to look up again, and/or by having postgres
pass a shard hint when connecting. This is tracked in the "Loose ends"
section of https://github.com/neondatabase/neon/issues/5507
## Problem
Panic when less than 8 bytes is presented in a startup packet.
## Summary of changes
We need there to be a 4 byte message code, so the expected min length is
8.
## Problem
In the past we've rolled out all new `compute_ctl` functionality right
to all users, which could be risky. I want to have a more fine-grained
control over what we enable, in which env and to which users.
## Summary of changes
Add an option to pass a list of feature flags to `compute_ctl`. If not
passed, it defaults to an empty list. Any unknown flags are ignored.
This allows us to release new experimental features safer, as we can
then flip the flag for one specific user, only Neon employees, free /
pro / etc. users and so on. Or control it per environment.
In the current implementation feature flags are passed via compute spec,
so they do not allow controlling behavior of `empty` computes. For them,
we can either stick with the previous approach, i.e. add separate cli
args or introduce a more generic `--features` cli argument.
## Problem
On pageservers upgraded to enable generations, these INFO level logs
were rather frequent. If a tenant timeline hasn't written new layers
since the upgrade, it will emit the "No index_part.json*" log every time
it starts.
## Summary of changes
- Downgrade two log lines from info to debug
- Add a tiny unit test that I wrote for sanity-checking that there
wasn't something wrong with our Generation-comparing logic when loading
index parts.
I would love to not expose the in-accurate value int he mgmt API at all,
and in fact control plane doesn't use it [^1].
But our tests do, and I have no desire to change them at this time.
[^1]: https://github.com/neondatabase/cloud/pull/8317
This PR adds an `existing_initdb_timeline_id` option to timeline
creation APIs, taking an optional timeline ID.
Follow-up of #5390.
If the `existing_initdb_timeline_id` option is specified via the HTTP
API, the pageserver downloads the existing initdb archive from the given
timeline ID and extracts it, instead of running initdb itself.
---------
Co-authored-by: Christian Schwarz <christian@neon.tech>
Remove handcrafted TenantConf deserialization code. Use
`serde_path_to_error` to include the field which failed parsing. Leaves
the duplicated TenantConf in pageserver and models, does not touch
PageserverConf handcrafted deserialization.
Error change:
- before change: "configure option `checkpoint_distance` cannot be
negative"
- after change: "`checkpoint_distance`: invalid value: integer `-1`,
expected u64"
Fixes: #5300
Cc: #3682
---------
Signed-off-by: Rahul Modpur <rmodpur2@gmail.com>
Co-authored-by: Shany Pozin <shany@neon.tech>
Co-authored-by: Joonas Koivunen <joonas@neon.tech>
(includes two preparatory commits from
https://github.com/neondatabase/neon/pull/5960)
## Problem
To accommodate multiple shards in the same tenant on the same
pageserver, we must include the full TenantShardId in local paths. That
means that all code touching local storage needs to see the
TenantShardId.
## Summary of changes
- Replace `tenant_id: TenantId` with `tenant_shard_id: TenantShardId` on
Tenant, Timeline and RemoteTimelineClient.
- Use TenantShardId in helpers for building local paths.
- Update all the relevant call sites.
This doesn't update absolutely everything: things like PageCache,
TaskMgr, WalRedo are still shard-naive. The purpose of this PR is to
update the core types so that others code can be added/updated
incrementally without churning the most central shared types.
## Problem
The TenantShardId in API URLs is sufficient to uniquely identify a
tenant shard, but not for it to function: it also needs to know its full
sharding configuration (stripe size, layout version) in order to map
keys to shards.
## Summary of changes
- Introduce ShardIdentity: this is the superset of ShardIndex (#5924 )
that is required for translating keys to shard numbers.
- Include ShardIdentity as an optional attribute of LocationConf
- Extend the public `LocationConfig` API structure with a flat
representation of shard attributes.
The net result is that at the point we construct a `Tenant`, we have a
`ShardIdentity` (inside LocationConf). This enables the next steps to
actually use the ShardIdentity to split WAL and validate that page
service requires are reaching the correct shard.
## Problem
For sharded tenants, the layer keys must include the shard number and
shard count, to disambiguate keys written by different shards in the
same tenant (shard number), and disambiguate layers written before and
after splits (shard count).
Closes: https://github.com/neondatabase/neon/issues/5924
## Summary of changes
There are no functional changes in this PR: everything behaves the same
for the default ShardIndex::unsharded() value. Actual construct of
sharded tenants will come next.
- Add a ShardIndex type: this is just a wrapper for a ShardCount and
ShardNumber. This is a subset of ShardIdentity: whereas ShardIdentity
contains enough information to filter page keys, ShardIndex contains
just enough information to construct a remote key. ShardIndex has a
compact encoding, the same as the shard part of TenantShardId.
- Store the ShardIndex as part of IndexLayerMetadata, if it is set to a
different value than ShardIndex::unsharded.
- Update RemoteTimelineClient and DeletionQueue to construct paths using
the layer metadata. Deletion code paths that previously just passed a
`Generation` now pass a full `LayerFileMetadata` to capture the shard as
well.
Notes to reviewers:
- In deletion code paths, I could have used a (Generation, ShardIndex)
instead of the full LayerFileMetadata. I opted for the full object
partly for brevity, and partly because in future when we add checksums
the deletion code really will care about the full metadata in order to
validate that it is deleting what was intended.
- While ShardIdentity and TenantShardId could both use a ShardIndex, I
find that they read more cleanly as "flat" structs that spell out the
shard count and number field separately. Serialization code would need
writing out by hand anyway, because TenantShardId's serialized form is
not a serde struct-style serialization.
- ShardIndex doesn't _have_ to exist (we could use ShardIdentity
everywhere), but it is a worthwhile optimization, as we will have many
copies of this as part of layer metadata. In future the size difference
betweedn ShardIndex and ShardIdentity may become larger if we implement
more sophisticated key distribution mechanisms (i.e. new values of
ShardIdentity::layout).
---------
Co-authored-by: Christian Schwarz <christian@neon.tech>
## Problem
See #2592
## Summary of changes
Compresses the results of initdb into a .tar.zst file and uploads them
to S3, to enable usage in recovery from lsn.
Generations should not be involved I think because we do this only once
at the very beginning of a timeline.
---------
Co-authored-by: Joonas Koivunen <joonas@neon.tech>
