Previously, we protected from multiple ProposerElected messages from the same
walproposer with the following condition:
msg.term == self.get_last_log_term() && self.flush_lsn() >
msg.start_streaming_at
It is not exhaustive, i.e. we could still proceed to truncating WAL even though
safekeeper inserted something since the divergence point has been
calculated. While it was most likely safe because walproposer can't use
safekeeper position to commit WAL until last_log_term reaches the current
walproposer term, let's be more careful and properly calculate the divergence
point like walproposer does.
## Problem
The control file contains the id of the safekeeper that uploaded it.
Previously, when sending a snapshot of the control file to another sk,
it would eventually be gc-ed by the receiving sk. This is incorrect
because the original sk might still need it later.
## Summary of Changes
When sending a snapshot and the control file contains an uploaded
segment:
* Create a copy of the segment in s3 with the destination sk in the
object name
* Tweak the streamed control file to point to the object create in the
previous step
Note that the snapshot endpoint now has to know the id of the requestor,
so the api has been extended to include the node if of the destination
sk.
Closes https://github.com/neondatabase/neon/issues/8542
## Problem
There is an unused safekeeper option `partial_backup_enabled`.
`partial_backup_enabled` was implemented in #6530, but this option was
always turned into enabled in #8022.
If you intended to keep this option for a specific reason, I will close
this PR.
## Summary of changes
I removed an unused safekeeper option `partial_backup_enabled`.
This commit tries to fix regular load spikes on staging, caused by too
many eviction and partial upload operations running at the same time.
Usually it was hapenning after restart, for partial backup the load was
delayed.
- Add a semaphore for evictions (2 permits by default)
- Rename `resident_since` to `evict_not_before` and smooth out the curve
by using random duration
- Use random duration in partial uploads as well
related to https://github.com/neondatabase/neon/issues/6338
some discussion in
https://neondb.slack.com/archives/C033RQ5SPDH/p1720601531744029
## Problem
The scrubber would like to check the highest mtime in a tenant's objects
as a safety check during purges. It recently switched to use
GenericRemoteStorage, so we need to expose that in the listing methods.
## Summary of changes
- In Listing.keys, return a ListingObject{} including a last_modified
field, instead of a RemotePath
---------
Co-authored-by: Arpad Müller <arpad-m@users.noreply.github.com>
PR #8299 has switched the storage scrubber to use
`DefaultCredentialsChain`. Now we do this for `remote_storage`, as it
allows us to use `remote_storage` from inside kubernetes. Most of the
diff is due to `GenericRemoteStorage::from_config` becoming `async fn`.
## Problem
After a shard split, the pageserver leaves the ancestor shard's content
in place. It may be referenced by child shards, but eventually child
shards will de-reference most ancestor layers as they write their own
data and do GC. We would like to eventually clean up those ancestor
layers to reclaim space.
## Summary of changes
- Extend the physical GC command with `--mode=full`, which includes
cleaning up unreferenced ancestor shard layers
- Add test `test_scrubber_physical_gc_ancestors`
- Remove colored log output: in testing this is irritating ANSI code
spam in logs, and in interactive use doesn't add much.
- Refactor storage controller API client code out of storcon_client into
a `storage_controller/client` crate
- During physical GC of ancestors, call into the storage controller to
check that the latest shards seen in S3 reflect the latest state of the
tenant, and there is no shard split in progress.
The error means that manager exited earlier than `ResidenceGuard` and
it's not unexpected with current deletion implementation. This commit
changes log level to reduse noise.
We have an issue that some partial uploaded segments can be actually
missing in remote storage. I found this issue when was looking at the
logs in staging, and it can be triggered by failed uploads:
1. Code tries to upload `SEG_TERM_LSN_LSN_sk5.partial`, but receives
error from S3
2. The failed attempt is saved to `segments` vec
3. After some time, the code tries to upload
`SEG_TERM_LSN_LSN_sk5.partial` again
4. This time the upload is successful and code calls `gc()` to delete
previous uploads
5. Since new object and old object share the same name, uploaded data
gets deleted from remote storage
This commit fixes the issue by patching `gc()` not to delete objects
with the same name as currently uploaded.
---------
Co-authored-by: Arpad Müller <arpad-m@users.noreply.github.com>
## Problem
new clippy warnings on nightly.
## Summary of changes
broken up each commit by warning type.
1. Remove some unnecessary refs.
2. In edition 2024, inference will default to `!` and not `()`.
3. Clippy complains about doc comment indentation
4. Fix `Trait + ?Sized` where `Trait: Sized`.
5. diesel_derives triggering `non_local_defintions`
## Problem
Follow up to https://github.com/neondatabase/neon/pull/8335, to improve
observability of how many evict/restores we are doing.
## Summary of changes
- Add `safekeeper_eviction_events_started_total` and
`safekeeper_eviction_events_completed_total`, with a "kind" label of
evict or restore. This gives us rates, and also ability to calculate how
many are in progress.
- Generalize SafekeeperMetrics test type to use the same helpers as
pageserver, and enable querying any metric.
- Read the new metrics at the end of the eviction test.
## Problem
- The condition for eviction is not time-based: it is possible for a
timeline to be restored in response to a client, that client times out,
and then as soon as the timeline is restored it is immediately evicted
again.
- There is no delay on eviction at startup of the safekeeper, so when it
starts up and sees many idle timelines, it does many evictions which
will likely be immediately restored when someone uses the timeline.
## Summary of changes
- Add `eviction_min_resident` parameter, and use it in
`ready_for_eviction` to avoid evictions if the timeline has been
resident for less than this period.
- This also implicitly delays evictions at startup for
`eviction_min_resident`
- Set this to a very low number for the existing eviction test, which
expects immediate eviction.
The default period is 15 minutes. The general reasoning for that is that
in the worst case where we thrash ~10k timelines on one safekeeper,
downloading 16MB for each one, we should set a period that would not
overwhelm the node's bandwidth.
## Problem
Safekeepers left running for a long time use a lot of memory (up to the
point of OOMing, on small nodes) for deleted timelines, because the
`Timeline` struct is kept alive as a guard against recreating deleted
timelines.
Closes: https://github.com/neondatabase/neon/issues/6810
## Summary of changes
- Create separate tombstones that just record a ttid and when the
timeline was deleted.
- Add a periodic housekeeping task that cleans up tombstones older than
a hardcoded TTL (24h)
I think this also makes https://github.com/neondatabase/neon/pull/6766
un-needed, as the tombstone is also checked during deletion.
I considered making the overall timeline map use an enum type containing
active or deleted, but having a separate map of tombstones avoids
bloating that map, so that calls like `get()` can still go straight to a
timeline without having to walk a hashmap that also contains tombstones.
Before this PR, `RemoteStorageConfig::from_toml` would support
deserializing an
empty `{}` TOML inline table to a `None`, otherwise try `Some()`.
We can instead let
* in proxy: let clap derive handle the Option
* in PS & SK: assume that if the field is specified, it must be a valid
RemtoeStorageConfig
(This PR started with a much simpler goal of factoring out the
`deserialize_item` function because I need that in another PR).
After https://github.com/neondatabase/neon/pull/8022 was deployed to
staging, I noticed many cases of timeouts. After inspecting the logs, I
realized that some operations are taking ~20 seconds and they're doing
while holding shared state lock. Usually it happens right after
redeploy, because compute reconnections put high load on disks. This
commit tries to improve observability around slow operations.
Non-observability changes:
- `TimelineState::finish_change` now skips update if nothing has changed
- `wal_residence_guard()` timeout is set to 30s
Fixes https://github.com/neondatabase/neon/issues/6337
Add safekeeper support to switch between `Present` and
`Offloaded(flush_lsn)` states. The offloading is disabled by default,
but can be controlled using new cmdline arguments:
```
--enable-offload
Enable automatic switching to offloaded state
--delete-offloaded-wal
Delete local WAL files after offloading. When disabled, they will be left on disk
--control-file-save-interval <CONTROL_FILE_SAVE_INTERVAL>
Pending updates to control file will be automatically saved after this interval [default: 300s]
```
Manager watches state updates and detects when there are no actvity on
the timeline and actual partial backup upload in remote storage. When
all conditions are met, the state can be switched to offloaded.
In `timeline.rs` there is `StateSK` enum to support switching between
states. When offloaded, code can access only control file structure and
cannot use `SafeKeeper` to accept new WAL.
`FullAccessTimeline` is now renamed to `WalResidentTimeline`. This
struct contains guard to notify manager about active tasks requiring
on-disk WAL access. All guards are issued by the manager, all requests
are sent via channel using `ManagerCtl`. When manager receives request
to issue a guard, it unevicts timeline if it's currently evicted.
Fixed a bug in partial WAL backup, it used `term` instead of
`last_log_term` previously.
After this commit is merged, next step is to roll this change out, as in
issue #6338.
Previously in safekeeper code, new segment file was opened without
truncate option. I don't think there is a reason to do it, this commit
replaces it with `File::create` to make it simpler and remove
`clippy::suspicious_open_options` linter warning.
This is a preparation for #8022, to make the PR both backwards and
foward compatible.
This commit adds `eviction_state` field to control file. Adds support
for reading it, but writes control file in old format where possible, to
keep the disk format forward compatible.
Note: in `patch_control_file`, new field gets serialized to json like
this:
- `"eviction_state": "Present"`
- `"eviction_state": {"Offloaded": "0/8F"}`
- Make safekeeper read SAFEKEEPER_AUTH_TOKEN env variable with JWT
token to connect to other safekeepers.
- Set it in neon_local when auth is enabled.
- Create simple rust http client supporting it, and use it in pull_timeline
implementation.
- Enable auth in all pull_timeline tests.
- Make sk http_client() by default generate safekeeper wide token, it makes
easier enabling auth in all tests by default.
- Add /snapshot http endpoing streaming tar archive timeline contents up to
flush_lsn.
- Add check that term doesn't change, corresponding test passes now.
- Also prepares infra to hold off WAL removal during the basebackup.
- Sprinkle fsyncs to persist the pull_timeline result.
ref https://github.com/neondatabase/neon/issues/6340
We had a random sleep in the beginning of partial backup task, which was
needed for the first partial backup deploy. It helped with gradual
upload of segments without causing network overload. Now partial backup
is deployed everywhere, so we don't need this random sleep anymore.
We also had an issue related to this, in which manager task was not shut
down for a long time. The cause of the issue is this random sleep that
didn't take timeline cancellation into account, meanwhile manager task
waited for partial backup to complete.
Fixes https://github.com/neondatabase/neon/issues/7967
The general partial backup idea is that each safekeeper keeps only one
partial segment in remote storage at a time. Sometimes this is not true,
for example if we uploaded object to S3 but got an error when tried to
remove the previous upload. In this case we still keep a list of all
potentially uploaded objects in safekeeper state.
This commit prints a warning to logs if there is too many objects in
safekeeper state. This is not expected and we should try to fix this
state, we can do this by running gc.
I haven't seen this being an issue anywhere, but printing a warning is
something that I wanted to do and forgot in initial PR.
This is a preparation for
https://github.com/neondatabase/neon/issues/6337.
The idea is to add FullAccessTimeline, which will act as a guard for
tasks requiring access to WAL files. Eviction will be blocked on these
tasks and WAL won't be deleted from disk until there is at least one
active FullAccessTimeline.
To get FullAccessTimeline, tasks call `tli.full_access_guard().await?`.
After eviction is implemented, this function will be responsible for
downloading missing WAL file and waiting until the download finishes.
This commit also contains other small refactorings:
- Separate `get_tenant_dir` and `get_timeline_dir` functions for
building a local path. This is useful for looking at usages and finding
tasks requiring access to local filesystem.
- `timeline_manager` is now responsible for spawning all background
tasks
- WAL removal task is now spawned instantly after horizon is updated
epoch is a historical and potentially confusing name. It semantically means
lastLogTerm from the raft paper, so let's use it.
This commit changes only internal namings, not public interface (http).
Do pull_timeline while WAL is being removed. To this end
- extract pausable_failpoint to utils, sprinkle pull_timeline with it
- add 'checkpoint' sk http endpoint to force WAL removal.
After fixing checking for pull file status code test fails so far which is
expected.
I looked at the metrics from
https://github.com/neondatabase/neon/pull/7768 on staging and it seems
that manager does too many iterations. This is probably caused by
background job `remove_wal.rs` which iterates over all timelines and
tries to remove WAL and persist control file. This causes shared state
updates and wakes up the manager. The fix is to skip notifying about the
updates if nothing was updated.
## Problem
Safekeeper Timeline uses a channel for cancellation, but we have a
dedicated type for that.
## Summary of changes
- Use CancellationToken in Timeline
In safekeepers we have several background tasks. Previously `WAL backup`
task was spawned by another task called `wal_backup_launcher`. That task
received notifications via `wal_backup_launcher_rx` and decided to spawn
or kill existing backup task associated with the timeline. This was
inconvenient because each code segment that touched shared state was
responsible for pushing notification into `wal_backup_launcher_tx`
channel. This was error prone because it's easy to miss and could lead
to deadlock in some cases, if notification pushing was done in the wrong
order.
We also had a similar issue with `is_active` timeline flag. That flag
was calculated based on the state and code modifying the state had to
call function to update the flag. We had a few bugs related to that,
when we forgot to update `is_active` flag in some places where it could
change.
To fix these issues, this PR adds a new `timeline_manager` background
task associated with each timeline. This task is responsible for
managing all background tasks, including `is_active` flag which is used
for pushing broker messages. It is subscribed for updates in timeline
state in a loop and decides to spawn/kill background tasks when needed.
There is a new structure called `TimelinesSet`. It stores a set of
`Arc<Timeline>` and allows to copy the set to iterate without holding
the mutex. This is what replaced `is_active` flag for the broker. Now
broker push task holds a reference to the `TimelinesSet` with active
timelines and use it instead of iterating over all timelines and
filtering by `is_active` flag.
Also added some metrics for manager iterations and active backup tasks.
Ideally manager should be doing not too many iterations and we should
not have a lot of backup tasks spawned at the same time.
Fixes#7751
---------
Co-authored-by: Arseny Sher <sher-ars@yandex.ru>
To avoid pageserver gc'ing data needed by standby, propagate standby apply LSN
through standby -> safekeeper -> broker -> pageserver flow and hold off GC for
it. Iteration of GC resets the value to remove the horizon when standby goes
away -- pushes are assumed to happen at least once between gc iterations. As a
safety guard max allowed lag compared to normal GC horizon is hardcoded as 10GB.
Add test for the feature.
Co-authored-by: Konstantin Knizhnik <knizhnik@neon.tech>
## Summary of changes
Updates the parquet lib. one change left that we need is in an open PR
against upstream, hopefully we can remove the git dependency by 52.0.0
https://github.com/apache/arrow-rs/pull/5773
I'm not sure why the parquet files got a little bit bigger. I tested
them and they still open fine. 🤷
side effect of the update, chrono updated and added yet another
deprecation warning (hence why the safekeepers change)
We didn't check permission in `"/v1/failpoints"` endpoint, it means that
everyone with per-tenant token could modify the failpoints. This commit
fixes that.
## Problem
There's allegedly a bug where if we connect a subscriber before WAL is
downloaded from the safekeeper, it creates an error.
## Summary of changes
Adds support for pausing safekeepers from sending WAL to computes, and
then creates a compute and attaches a subscriber while it's in this
paused state. Fails to reproduce the issue, but probably a good test to
have
---------
Co-authored-by: Arseny Sher <sher-ars@yandex.ru>
Previously its segment header and page header of first record weren't
initialized because compute streams data only since first record LSN. Also, fix
a bug in the existing code for initialization: xlp_rem_len must not include page
header.
These changes make first segment pg_waldump'able.
We had an incident where pageserver requests timed out because
pageserver couldn't fetch WAL from safekeepers. This incident was caused
by a bug in safekeeper logic for timeline activation, which prevented
pageserver from finding safekeepers.
This bug was since fixed, but there is still a chance of a similar bug
in the future due to overall complexity.
We add a new broker message to "signal interest" for timeline. This
signal will be sent by pageservers `wait_lsn`, and safekeepers will
receive this signal to start broadcasting broker messages. Then every
broker subscriber will be able to find the safekeepers and connect to
them (to start fetching WAL).
This feature is not limited to pageservers and any service that wants to
download WAL from safekeepers will be able to use this discovery
request.
This commit changes pageserver's connection_manager (walreceiver) to
send a SafekeeperDiscoveryRequest when there is no information about
safekeepers present in memory. Current implementation will send these
requests only if there is an active wait_lsn() call and no more often
than once per 10 seconds.
Add `test_broker_discovery` to test this: safekeepers started with
`--disable-periodic-broker-push` will not push info to broker so that
pageserver must use a discovery to start fetching WAL.
Add task_stats in safekeepers broker module to log a warning if there is
no message received from the broker for the last 10 seconds.
Closes#5471
---------
Co-authored-by: Christian Schwarz <christian@neon.tech>
## Problem
Split off from https://github.com/neondatabase/neon/pull/7399, which is
the first piece of code that does a WithDelimiter object listing using a
prefix that isn't a full directory name.
## Summary of changes
- Revise list function to not append a `/` to the prefix -- prefixes
don't have to end with a slash.
- Fix local_fs implementation of list to not assume that WithDelimiter
case will always use a directory as a prerfix.
- Remove `list_files`, `list_prefixes` wrappers, as they add little
value and obscure the underlying list function -- we need callers to
understand the semantics of what they're really calling (listobjectsv2)
Found these logs on staging safekeepers:
```
INFO Partial backup{ttid=X/Y}: failed to upload 000000010000000000000000_173_0000000000000000_0000000000000000_sk56.partial: Failed to open file "/storage/safekeeper/data/X/Y/000000010000000000000000.partial" for wal backup: No such file or directory (os error 2)
INFO Partial backup{ttid=X/Y}:upload{name=000000010000000000000000_173_0000000000000000_0000000000000000_sk56.partial}: starting upload PartialRemoteSegment { status: InProgress, name: "000000010000000000000000_173_0000000000000000_0000000000000000_sk56.partial", commit_lsn: 0/0, flush_lsn: 0/0, term: 173 }
```
This is because partial backup tries to upload zero segment when there
is no data in timeline. This PR fixes this bug introduced in #6530.
Add support for backing up partial segments to remote storage. Disabled
by default, can be enabled with `--partial-backup-enabled`.
Safekeeper timeline has a background task which is subscribed to
`commit_lsn` and `flush_lsn` updates. After the partial segment was
updated (`flush_lsn` was changed), the segment will be uploaded to S3 in
about 15 minutes.
The filename format for partial segments is
`Segment_Term_Flush_Commit_skNN.partial`, where:
- `Segment` – the segment name, like `000000010000000000000001`
- `Term` – current term
- `Flush` – flush_lsn in hex format `{:016X}`, e.g. `00000000346BC568`
- `Commit` – commit_lsn in the same hex format
- `NN` – safekeeper_id, like `1`
The full object name example:
`000000010000000000000002_2_0000000002534868_0000000002534410_sk1.partial`
Each safekeeper will keep info about remote partial segments in its
control file. Code updates state in the control file before doing any S3
operations. This way control file stores information about all
potentially existing remote partial segments and can clean them up after
uploading a newer version.
Closes#6336
