Adds a `Deserialize` impl to `RemoteStorageConfig`. We thus achieve the
same as #7743 but with less repetitive code, by deriving `Deserialize`
impls on `S3Config`, `AzureConfig`, and `RemoteStorageConfig`. The
disadvantage is less useful error messages.
The git history of this PR contains a state where we go via an
intermediate representation, leveraging the `serde_json` crate,
without it ever being actual json though.
Also, the PR adds deserialization tests.
Alternative to #7743 .
## Problem
Some tasks are using around upwards of 10KB of memory at all times,
sometimes having buffers that swing them up to 30MB.
## Summary of changes
Split some of the async tasks in selective places and box them as
appropriate to try and reduce the constant memory usage. Especially in
the locations where the large future is only a small part of the total
runtime of the task.
Also, reduces the size of the CopyBuffer buffer size from 8KB to 1KB.
In my local testing and in staging this had a minor improvement. sadly
not the improvement I was hoping for :/ Might have more impact in
production
## Problem
rust 1.79 new enabled by default lints
## Summary of changes
* update to rust 1.79
* `s/default_features/default-features/`
* fix proxy dead code.
* fix pageserver dead code.
Closes#7406.
## Problem
When a `get_lsn_by_timestamp` request is cancelled, an anyhow error is
exposed to handle that case, which verbosely logs the error. However, we
don't benefit from having the full backtrace provided by anyhow in this
case.
## Summary of changes
This PR introduces a new `ApiError` type to handle errors caused by
cancelled request more robustly.
- A new enum variant `ApiError::Cancelled`
- Currently the cancelled request is mapped to status code 500.
- Need to handle this error in proxy's `http_util` as well.
- Added a failpoint test to simulate cancelled `get_lsn_by_timestamp`
request.
Signed-off-by: Yuchen Liang <yuchen@neon.tech>
## Problem
There was a bug in dynamic rate limiter, which exhausted CPU in proxy
and proxy wasn't able to accept any connections.
## Summary of changes
1. `if self.available > 1` -> `if self.available >= 1`
2. remove `timeout_at` to use just timeout
3. remove potential infinite loops which can exhaust CPUs.
## Problem
proxy params being a `HashMap<String,String>` when it contains just
```
application_name: psql
database: neondb
user: neondb_owner
```
is quite wasteful allocation wise.
## Summary of changes
Keep the params in the wire protocol form, eg:
```
application_name\0psql\0database\0neondb\0user\0neondb_owner\0
```
Using a linear search for the map is fast enough at small sizes, which
is the normal case.
## Problem
We were rate limiting wake_compute in the wrong place
## Summary of changes
Move wake_compute rate limit to after the permit is acquired. Also makes
a slight refactor on normalize, as it caught my eye
## Problem
Computes that are healthy can manage many connection attempts at a time.
Unhealthy computes cannot. We initially handled this with a fixed
concurrency limit, but it seems this inhibits pgbench.
## Summary of changes
Support AIMD for connect_to_compute lock to allow varying the
concurrency limit based on compute health
Get rid of postgres-native-tls and openssl in favour of rustls in our
dependency tree.
Do further steps to completely remove native-tls and openssl.
Among other advantages, this allows us to do static musl builds more
easily: #7889
## Problem
Seems the websocket buffering was broken for large query responses only
## Summary of changes
Move buffering until after the underlying stream is ready.
Tested locally confirms this fixes the bug.
Also fixes the pg-sni-router missing metrics bug
## Problem
Despite making password hashing async, it can still take time away from
the network code.
## Summary of changes
Introduce a custom threadpool, inspired by rayon. Features:
### Fairness
Each task is tagged with it's endpoint ID. The more times we have seen
the endpoint, the more likely we are to skip the task if it comes up in
the queue. This is using a min-count-sketch estimator for the number of
times we have seen the endpoint, resetting it every 1000+ steps.
Since tasks are immediately rescheduled if they do not complete, the
worker could get stuck in a "always work available loop". To combat
this, we check the global queue every 61 steps to ensure all tasks
quickly get a worker assigned to them.
### Balanced
Using crossbeam_deque, like rayon does, we have workstealing out of the
box. I've tested it a fair amount and it seems to balance the workload
accordingly
## Summary of changes
Updates the parquet lib. one change left that we need is in an open PR
against upstream, hopefully we can remove the git dependency by 52.0.0
https://github.com/apache/arrow-rs/pull/5773
I'm not sure why the parquet files got a little bit bigger. I tested
them and they still open fine. 🤷
side effect of the update, chrono updated and added yet another
deprecation warning (hence why the safekeepers change)
## Problem
I wanted to do a deep dive of the tungstenite codebase.
tokio-tungstenite is incredibly convoluted... In my searching I found
[fastwebsockets by deno](https://github.com/denoland/fastwebsockets),
but it wasn't quite sufficient.
This also removes the default 16MB/64MB frame/message size limitation.
framed-websockets solves this by inserting continuation frames for
partially received messages, so the whole message does not need to be
entirely read into memory.
## Summary of changes
I took the fastwebsockets code as a starting off point and rewrote it to
be simpler, server-only, and be poll-based to support our Read/Write
wrappers.
I have replaced our tungstenite code with my framed-websockets fork.
<https://github.com/neondatabase/framed-websockets>
## Problem
There is no global per-ep rate limiter in proxy.
## Summary of changes
* Return global per-ep rate limiter back.
* Rename weak compute rate limiter (the cli flags were not used
anywhere, so it's safe to rename).
## Problem
If a permit cannot be acquired to connect to compute, the cache is
invalidated. This had the observed affect of sending more traffic to
ProxyWakeCompute on cplane.
## Summary of changes
Make sure that permit acquire failures are marked as "should not
invalidate cache".
## Problem
Some HTTP client connections can stay open for quite a long time.
## Summary of changes
When there are too many HTTP client connections, pick a random
connection and gracefully cancel it.
## Problem
Usually, the connection itself is quite fast (bellow 10ms for p999:
https://neonprod.grafana.net/goto/aOyn8vYIg?orgId=1).
It doesn't make a lot of sense to wait for a lot of time for the lock,
if it takes a lot of time to acquire it, probably, something goes wrong.
We also spawn a lot of retries, but they are not super helpful (0 means
that it was connected successfully, 1, most probably, that it was
re-request of the compute node address
https://neonprod.grafana.net/goto/J_8VQvLIR?orgId=1). Let's try to keep
a small number of retries.
## Problem
Too many connect_compute attempts can overwhelm postgres, getting the
connections stuck.
## Summary of changes
Limit number of connection attempts that can happen at a given time.
## Problem
It's not possible to get the duration of the session from proxy events.
## Summary of changes
* Added a separate events folder in s3, to record disconnect events.
* Disconnect events are exactly the same as normal events, but also have
`disconnect_timestamp` field not empty.
* @oruen suggested to fill it with the same information as the original
events to avoid potentially heavy joins.
## Problem
Start switching from the global redis to the regional one
## Summary of changes
* Publish cancellations to the regional redis
* Listen notifications from both: global and regional
## Problem
The `WithClientIp` AsyncRead/Write abstraction never filled me with much
joy. I would just rather read the protocol header once and then get the
remaining buf and reader.
## Summary of changes
* Replace `WithClientIp::wait_for_addr` with `read_proxy_protocol`.
* Replace `WithClientIp` with `ChainRW`.
* Optimise `ChainRW` to make the standard path more optimal.
Currently we move data to the intended storage class via lifecycle
rules, but those are a daily batch job so data first spends up to a day
in standard storage.
Therefore, make it possible to specify the storage class used for
uploads to S3 so that the data doesn't have to be migrated
automatically.
The advantage of this is that it gives cleaner billing reports.
Part of https://github.com/neondatabase/cloud/issues/11348
## Problem
Currently we cannot configure retries, also, we don't really have
visibility of what's going on there.
## Summary of changes
* Added cli params
* Improved logging
* Decrease the number of retries: it feels like most of retries doesn't
help. Once there would be better errors handling, we can increase it
back.
## Problem
Sometimes rejected metric might record invalid events.
## Summary of changes
* Only record it `rejected` was explicitly set.
* Change order in logs.
* Report metrics if not under high-load.
## Problem
There is an unused dead code.
## Summary of changes
Let's remove it. In case we would need it in the future, we can always
return it back.
Also removed cli arguments. They shouldn't be used by anyone but us.
## Problem
Many users have access to ipv6 subnets (eg a /64). That gives them 2^64
addresses to play with
## Summary of changes
Truncate the address to /64 to reduce the attack surface.
Todo:
~~Will NAT64 be an issue here? AFAIU they put the IPv4 address at the
end of the IPv6 address. By truncating we will lose all that detail.~~
It's the same problem as a host sharing IPv6 addresses between clients.
I don't think it's up to us to solve. If a customer is getting DDoSed,
then they likely need to arrange a dedicated IP with us.
## Problem
possible for the database connections to not close in time.
## Summary of changes
force the closing of connections if the client has hung up
## Problem
Actually read redis events.
## Summary of changes
This is revert of https://github.com/neondatabase/neon/pull/7350 +
fixes.
* Fixed events parsing
* Added timeout after connection failure
* Separated regional and global redis clients.
## Problem
My benchmarks show that prometheus is not very good.
https://github.com/conradludgate/measured
We're already using it in storage_controller and it seems to be working
well.
## Summary of changes
Replace prometheus with my new measured crate in proxy only.
Apologies for the large diff. I tried to keep it as minimal as I could.
The label types add a bit of boiler plate (but reduce the chance we
mistype the labels), and some of our custom metrics like CounterPair and
HLL needed to be rewritten.
## Problem
hyper1 offers control over the HTTP connection that hyper0_14 does not.
We're blocked on switching all services to hyper1 because of how we use
tonic, but no reason we can't switch proxy over.
## Summary of changes
1. hyper0.14 -> hyper1
1. self managed server
2. Remove the `WithConnectionGuard` wrapper from `protocol2`
2. Remove TLS listener as it's no longer necessary
3. include first session ID in connection startup logs
## Problem
Proxy doesn't know about existing endpoints.
## Summary of changes
* Added caching of all available endpoints.
* On the high load, use it before going to cplane.
* Report metrics for the outcome.
* For rate limiter and credentials caching don't distinguish between
`-pooled` and not
TODOs:
* Make metrics more meaningful
* Consider integrating it with the endpoint rate limiter
* Test it together with cplane in preview
## Problem
Would be nice to have a bit more info on cold start metrics.
## Summary of changes
* Change connect compute latency to include `cold_start_info`.
* Update `ColdStartInfo` to include HttpPoolHit and WarmCached.
* Several changes to make more use of interned strings
