## Problem
This test was destabilized by
https://github.com/neondatabase/neon/pull/8431. The threshold is
arbitrary & failures are still quite close to it. At a high level the
test is asserting "eviction was approximately fair to these tenants",
which appears to still be the case when the abs diff between ratios is
slightly higher at ~0.6-0.7.
## Summary of changes
- Change threshold from 0.06 to 0.065. Based on the last ~10 failures
that should be sufficient.
## Problem
Currently, tests may have a scrub during teardown if they ask for it,
but most tests don't request it. To detect "unknown unknowns", let's run
it at the end of every test where possible. This is similar to asserting
that there are no errors in the log at the end of tests.
## Summary of changes
- Remove explicit `enable_scrub_on_exit`
- Always scrub if remote storage is an S3Storage.
## Problem
Re-attach blocks the pageserver http server from starting up. Hence, it
can't reply to heartbeats
until that's done. This makes the storage controller mark the node
off-line (not good). We worked
around this by setting the interval after which nodes are marked offline
to 5 minutes. This isn't a
long term solution.
## Summary of changes
* Introduce a new `NodeAvailability` state: `WarmingUp`. This state
models the following time interval:
* From receiving the re-attach request until the pageserver replies to
the first heartbeat post re-attach
* The heartbeat delta generator becomes aware of this state and uses a
separate longer interval
* Flag `max-warming-up-interval` now models the longer timeout and
`max-offline-interval` the shorter one to
match the names of the states
Closes https://github.com/neondatabase/neon/issues/7552
## Problem
In `test_basebackup_with_high_slru_count`, the pageserver is sometimes
mysteriously hanging on startup, having been started+stopped earlier in
the test setup while populating template tenant data.
- #7586
We can't see why this is hanging in this particular test. The test does
some weird stuff though, like attaching a load of broken tenants and
then doing a SIGQUIT kill of a pageserver.
## Summary of changes
- Attach tenants normally instead of doing a failpoint dance to attach
them as broken
- Shut the pageserver down gracefully during init instead of using
immediate mode
- Remove the "sequential" variant of the unstable test, as this is going
away soon anyway
- Log before trying to acquire lock file, so that if it hangs we have a
clearer sense of if that's really where it's hanging. It seems like it
is, but that code does a non-blocking flock so it's surprising.
## Problem
LayerAccessStats contains a lot of detail that we don't use: short
histories of most recent accesses, specifics on what kind of task
accessed a layer, etc. This is all stored inside a Mutex, which is
locked every time something accesses a layer.
## Summary of changes
- Store timestamps at a very low resolution (to the nearest second),
sufficient for use on the timescales of eviction.
- Pack access time and last residence change time into a single u64
- Use the high bits of the u64 for other flags, including the new layer
visibility concept.
- Simplify the external-facing model for access stats to just include
what we now track.
Note that the `HistoryBufferWithDropCounter` is removed here because it
is no longer used. I do not dislike this type, we just happen not to use
it for anything else at present.
Co-authored-by: Christian Schwarz <christian@neon.tech>
## Problem
`test_change_pageserver` stops pageservers in a way that can overlap
with the controller's heartbeats: the controller can get a heartbeat
success and then immediately find the node unavailable. This particular
situation triggers a log that isn't in our current allow-list of
messages for nodes offline
Example:
https://neon-github-public-dev.s3.amazonaws.com/reports/pr-8339/10048487700/index.html#testresult/19678f27810231df/retries
## Summary of changes
- Add the message to the allow list
## Problem
Postgres is using `access()` function in `GetNewRelFileNumber` to check
if assigned relfilenumber is not used for any other relation. This check
will not work in Neon, because we do not have all files in local
storage.
## Summary of changes
Use smgrexists() instead which will check at page server if such
relfilenode is used.
## Checklist before requesting a review
- [ ] I have performed a self-review of my code.
- [ ] If it is a core feature, I have added thorough tests.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [ ] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
## Checklist before merging
- [ ] Do not forget to reformat commit message to not include the above
checklist
---------
Co-authored-by: Konstantin Knizhnik <knizhnik@neon.tech>
## Problem
This test sometimes found that ancestors were getting cleaned up before
it had done any compaction.
Compaction was happening implicitly via Workload.
Example:
https://neon-github-public-dev.s3.amazonaws.com/reports/pr-8298/10032173390/index.html#testresult/fb04786402f80822/retries
## Summary of changes
- Set upload=False when writing data after shard split, to avoid doing a
checkpoint
- Add a checkpoint_period & explicit wait for uploads so that we ensure
data lands in S3 without doing a checkpoint
Part of #8128.
## Problem
Scrubber uses `scan_metadata` command to flag metadata inconsistencies.
To trust it at scale, we need to make sure the errors we emit is a
reflection of real scenario. One check performed in the scrubber is to
see whether layers listed in the latest `index_part.json` is present in
object listing. Currently, the scrubber does not robustly handle the
case where objects are uploaded/deleted during the scan.
## Summary of changes
**Condition for success:** An object in the index is (1) in the object
listing we acquire from S3 or (2) found in a HeadObject request (new
object).
- Add in the `HeadObject` requests for the layers missing from the
object listing.
- Keep the order of first getting the object listing and then
downloading the layers.
- Update check to only consider shards with highest shard count.
- Skip analyzing a timeline if `deleted_at` tombstone is marked in
`index_part.json`.
- Add new test to see if scrubber actually detect the metadata
inconsistency.
_Misc_
- A timeline with no ancestor should always have some layers.
- Removed experimental histograms
_Caveat_
- Ancestor layer is not cleaned until #8308 is implemented. If ancestor
layers reference non-existing layers in the index, the scrubber will
emit false positives.
Signed-off-by: Yuchen Liang <yuchen@neon.tech>
## Problem
This test predates the storage controller. It stops pageservers and
reconfigures computes, but that races with the storage controller's node
failure detection, which can result in restarting nodes not getting the
attachments they expect, and the test failing
## Summary of changes
- Configure the storage controller to use a compute notify hook that
does nothing, so that it cannot interfere with the test's configuration
of computes.
- Instead of using the attach hook, just notify the storage controller
that nodes are offline, and reconcile tenants so that they will
automatically be attached to the other node.
## Problem
Deployed pageserver configurations are all like this:
```
disk_usage_based_eviction:
max_usage_pct: 85
min_avail_bytes: 0
period: "10s"
eviction_order:
type: "RelativeAccessed"
args:
highest_layer_count_loses_first: true
```
But we're maintaining this optional absolute order eviction, with test
cases etc.
## Summary of changes
- Remove absolute order eviction. Make the default eviction policy the
same as how we really deploy pageservers.
## Problem
After a shard split, the pageserver leaves the ancestor shard's content
in place. It may be referenced by child shards, but eventually child
shards will de-reference most ancestor layers as they write their own
data and do GC. We would like to eventually clean up those ancestor
layers to reclaim space.
## Summary of changes
- Extend the physical GC command with `--mode=full`, which includes
cleaning up unreferenced ancestor shard layers
- Add test `test_scrubber_physical_gc_ancestors`
- Remove colored log output: in testing this is irritating ANSI code
spam in logs, and in interactive use doesn't add much.
- Refactor storage controller API client code out of storcon_client into
a `storage_controller/client` crate
- During physical GC of ancestors, call into the storage controller to
check that the latest shards seen in S3 reflect the latest state of the
tenant, and there is no shard split in progress.
We're removing the usage of this long-meaningless config field in
https://github.com/neondatabase/aws/pull/1599
Once that PR has been deployed to staging and prod, we can merge this
PR.
Successor of #8288 , just enable zstd in tests. Also adds a test that
creates easily compressable data.
Part of #5431
---------
Co-authored-by: John Spray <john@neon.tech>
Co-authored-by: Joonas Koivunen <joonas@neon.tech>
## Problem
Ahead of enabling eviction in the field, where it will become the
normal/default mode, let's enable it by default throughout our tests in
case any issues become visible there.
## Summary of changes
- Make default `extra_opts` for safekeepers enable offload & deletion
- Set low timeouts in `extra_opts` so that tests running for tens of
seconds have a chance to hit some of these background operations.
## Problem
These tests time out ~1 in 50 runs when in debug mode.
There is no indication of a real issue: they're just wrappers that have
large numbers of individual tests contained within on pytest case.
## Summary of changes
- Bump pg_regress timeout from 600 to 900s
- Bump test_isolation timeout from 300s (default) to 600s
In future it would be nice to break out these tests to run individual
cases (or batches thereof) as separate tests, rather than this monolith.
## Problem
This test would occasionally fail its metric check. This could happen in
the rare case that the nodes had all been restarted before their most
recent eviction.
The metric check was added in
https://github.com/neondatabase/neon/pull/8348
## Summary of changes
- Check metrics before each restart, accumulate into a bool that we
assert on at the end of the test
When `NeonEnv.from_repo_dir` was introduced, storage controller stored
its
state exclusively `attachments.json`.
Since then, it has moved to using Postgres, which stores its state in
`storage_controller_db`.
But `NeonEnv.from_repo_dir` wasn't adjusted to do this.
This PR rectifies the situation.
Context for this is failures in
`test_pageserver_characterize_throughput_with_n_tenants`
CF:
https://neondb.slack.com/archives/C033RQ5SPDH/p1721035799502239?thread_ts=1720901332.293769&cid=C033RQ5SPDH
Notably, `from_repo_dir` is also used by the backwards- and
forwards-compatibility.
Thus, the changes in this PR affect those tests as well.
However, it turns out that the compatibility snapshot already contains
the `storage_controller_db`.
Thus, it should just work and in fact we can remove hacks like
`fixup_storage_controller`.
Follow-ups created as part of this work:
* https://github.com/neondatabase/neon/issues/8399
* https://github.com/neondatabase/neon/issues/8400
## Problem
We lack insight into:
- How much of a tenant's physical size is image vs. delta layers
- Average sizes of image vs. delta layers
- Total layer counts per timeline, indicating size of index_part object
As well as general observability love, this is motivated by
https://github.com/neondatabase/neon/issues/6738, where we need to
define some sensible thresholds for storage amplification, and using
total physical size may not work well (if someone does a lot of DROPs
then it's legitimate for the physical-synthetic ratio to be huge), but
the ratio between image layer size and delta layer size may be a better
indicator of whether we're generating unreasonable quantities of image
layers.
## Summary of changes
- Add pageserver_layer_bytes and pageserver_layer_count metrics,
labelled by timeline and `kind` (delta or image)
- Add & subtract these with LayerInner's lifetime.
I'm intentionally avoiding using a generic metric RAII guard object, to
avoid bloating LayerInner: it already has all the information it needs
to update metric on new+drop.
This test reproduces the case of a writer creating a deep stack of L0
layers. It uses realistic layer sizes and writes several gigabytes of
data, therefore runs as a performance test although it is validating
memory footprint rather than performance per se.
It acts a regression test for two recent fixes:
- https://github.com/neondatabase/neon/pull/8401
- https://github.com/neondatabase/neon/pull/8391
In future it will demonstrate the larger improvement of using a k-merge
iterator for L0 compaction (#8184)
This test can be extended to enforce limits on the memory consumption of
other housekeeping steps, by restarting the pageserver and then running
other things to do the same "how much did RSS increase" measurement.
## Problem
The `evictions_with_low_residence_duration` is used as an indicator of
cache thrashing. However, there are situations where it is quite
legitimate to only have a short residence during compaction, where a
delta is downloaded, used to generate an image layer, and then
discarded. This can lead to false positive alerts.
## Summary of changes
- Only track low residence duration for layers that have been accessed
at least once (compaction doesn't count as an access). This will give us
a metric that indicates thrashing on layers that the _user_ is using,
rather than those we're downloading for housekeeping purposes.
Once we add "layer visibility" as an explicit property of layers, this
can also be used as a cleaner condition (residence of non-visible layers
should never be alertable)
As described in #8385, the likely source for flakiness in
test_tenant_creation_fails is the following sequence of events:
1. test instructs the storage controller to create the tenant
2. storage controller adds the tenant and persists it to the database.
issues a creation request
3. the pageserver restarts with the failpoint disabled
4. storage controller's background reconciliation still wants to create
the tenant
5. pageserver gets new request to create the tenant from background
reconciliation
This commit just avoids the storage controller entirely. It has its own
set of issues, as the re-attach request will obviously not include the
tenant, but it's still useful to test for non-existence of the tenant.
The generation is also not optional any more during tenant attachment.
If you omit it, the pageserver yields an error. We change the signature
of `tenant_attach` to reflect that.
Alternative to #8385Fixes#8266
Right now timeline detach ancestor reports an error (409, "no ancestor")
on a new attempt after successful completion. This makes it troublesome
for storage controller retries. Fix it to respond with `200 OK` as if
the operation had just completed quickly.
Additionally, the returned timeline identifiers in the 200 OK response
are now ordered so that responses between different nodes for error
comparison are done by the storage controller added in #8353.
Design-wise, this PR introduces a new strategy for accessing the latest
uploaded IndexPart:
`RemoteTimelineClient::initialized_upload_queue(&self) ->
Result<UploadQueueAccessor<'_>, NotInitialized>`. It should be a more
scalable way to query the latest uploaded `IndexPart` than to add a
query method for each question directly on `RemoteTimelineClient`.
GC blocking will need to be introduced to make the operation fully
idempotent. However, it is idempotent for the cases demonstrated by
tests.
Cc: #6994
## Problem
Pageserver GC uses a size-based condition (GC "horizon" in addition to
time-based "PITR").
Eventually we plan to retire the size-based condition:
https://github.com/neondatabase/neon/issues/6374
Currently, we always apply the more conservative of the two, meaning
that tenants always retain at least 64MB of history (default horizon),
even after a very long time has passed. This is particularly acute in
cases where someone has dropped tables/databases, and then leaves a
database idle: the horizon can prevent GCing very large quantities of
historical data (we already account for this in synthetic size by
ignoring gc horizon).
We're not entirely removing GC horizon right now because we don't want
to 100% rely on standby_horizon for robustness of physical replication,
but we can tweak our logic to avoid retaining that 64MB LSN length
indefinitely.
## Summary of changes
- Rework `Timeline::find_gc_cutoffs`, with new logic:
- If there is no PITR set, then use `DEFAULT_PITR_INTERVAL` (1 week) to
calculate a time threshold. Retain either the horizon or up to that
thresholds, whichever requires less data.
- When there is a PITR set, and we have unambiguously resolved the
timestamp to an LSN, then ignore the GC horizon entirely. For typical
PITRs (1 day, 1 week), this will still easily retain enough data to
avoid stressing read only replicas.
The key property we end up with, whether a PITR is set or not, is that
after enough time has passed, our GC cutoff on an idle timeline will
catch up with the last_record_lsn.
Using `DEFAULT_PITR_INTERVAL` is a bit of an arbitrary hack, but this
feels like it isn't really worth the noise of exposing in TenantConfig.
We could just make it a different named constant though. The end-end
state will be that there is no gc_horizon at all, and that tenants with
pitr_interval=0 would truly retain no history, so this constant would go
away.
Currently storage controller does not support forwarding timeline detach
ancestor requests to pageservers. Add support for forwarding `PUT
.../:tenant_id/timelines/:timeline_id/detach_ancestor`. Implement the
support mostly as is, because the timeline detach ancestor will be made
(mostly) idempotent in future PR.
Cc: #6994
## Problem
Right now if there are too many running xacts to be restored from CLOG
at replica startup,
then replica is not trying to restore them and wait for non-overflown
running-xacs WAL record from primary.
But if primary is not active, then replica will not start at all.
Too many running xacts can be caused by transactions with large number
of subtractions.
But right now it can be also cause by two reasons:
- Lack of shutdown checkpoint which updates `oldestRunningXid` (because
of immediate shutdown)
- nextXid alignment on 1024 boundary (which cause loosing ~1k XIDs on
each restart)
Both problems are somehow addressed now.
But we have existed customers with "sparse" CLOG and lack of
checkpoints.
To be able to start RO replicas for such customers I suggest to add GUC
which allows replica to start even in case of subxacts overflow.
## Summary of changes
Add `neon.running_xacts_overflow_policy` with the following values:
- ignore: restore from CLOG last N XIDs and accept connections
- skip: do not restore any XIDs from CXLOGbut still accept connections
- wait: wait non-overflown running xacts record from primary node
## Checklist before requesting a review
- [ ] I have performed a self-review of my code.
- [ ] If it is a core feature, I have added thorough tests.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [ ] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
## Checklist before merging
- [ ] Do not forget to reformat commit message to not include the above
checklist
---------
Co-authored-by: Konstantin Knizhnik <knizhnik@neon.tech>
## Problem
This test would sometimes violate the min resident size during disk
eviction and fail due to the generate warning log.
Disk usage candidate collection only takes into account active tenants.
However, the statvfs call takes into account the entire tenants
directory, which includes tenants which haven't become active yet.
After re-starting the pageserver, disk usage eviction may kick in
*before* both tenants have become active. Hence, the logic will try to satisfy
thedisk usage requirements by evicting everything belonging to the active
tenant, and hence violating the tenant minimum resident size.
## Summary of changes
Allow the warning
## Problem
We already back off on compaction retries, but the impact of a failing
compaction can be so great that backing off up to 300s isn't enough. The
impact is consuming a lot of I/O+CPU in the case of image layer
generation for large tenants, and potentially also leaking disk space.
Compaction failures are extremely rare and almost always indicate a bug,
frequently a bug that will not let compaction to proceed until it is
fixed.
Related: https://github.com/neondatabase/neon/issues/6738
## Summary of changes
- Introduce a CircuitBreaker type
- Add a circuit breaker for compaction, with a policy that after 5
failures, compaction will not be attempted again for 24 hours.
- Add metrics that we can alert on: any >0 value for
`pageserver_circuit_breaker_broken_total` should generate an alert.
- Add a test that checks this works as intended.
Couple notes to reviewers:
- Circuit breakers are intrinsically a defense-in-depth measure: this is
not the solution to any underlying issues, it is just a general
mitigation for "unknown unknowns" that might be encountered in future.
- This PR isn't primarily about writing a perfect CircuitBreaker type:
the one in this PR is meant to be just enough to mitigate issues in
compaction, and make it easy to monitor/alert on these failures. We can
refine this type in future as/when we want to use it elsewhere.
## Problem
I need `neon_superuser` to be allowed to create snapshots for
replication tests
## Summary of changes
Adds a migration that grants these functions to neon_superuser
## Problem
In anticipation of later adding a really nice drain+delete API, I
initially only added an intentionally basic `/drop` API that is just
about usable for deleting nodes in a pinch, but requires some ugly
storage controller restarts to persuade it to restart secondaries.
## Summary of changes
I started making a few tiny fixes, and ended up writing the delete
API...
- Quality of life nit: ordering of node + tenant listings in storcon_cli
- Papercut: Fix the attach_hook using the wrong operation type for
reporting slow locks
- Make Service::spawn tolerate `generation_pageserver` columns that
point to nonexistent node IDs. I started out thinking of this as a
general resilience thing, but when implementing the delete API I
realized it was actually a legitimate end state after the delete API is
called (as that API doesn't wait for all reconciles to succeed).
- Add a `DELETE` API for nodes, which does not gracefully drain, but
does reschedule everything. This becomes safe to use when the system is
in any state, but will incur availability gaps for any tenants that
weren't already live-migrated away. If tenants have already been
drained, this becomes a totally clean + safe way to decom a node.
- Add a test and a storcon_cli wrapper for it
This is meant to be a robust initial API that lets us remove nodes
without doing ugly things like restarting the storage controller -- it's
not quite a totally graceful node-draining routine yet. There's more
work in https://github.com/neondatabase/neon/issues/8333 to get to our
end-end state.
## Problem
Follow up to https://github.com/neondatabase/neon/pull/8335, to improve
observability of how many evict/restores we are doing.
## Summary of changes
- Add `safekeeper_eviction_events_started_total` and
`safekeeper_eviction_events_completed_total`, with a "kind" label of
evict or restore. This gives us rates, and also ability to calculate how
many are in progress.
- Generalize SafekeeperMetrics test type to use the same helpers as
pageserver, and enable querying any metric.
- Read the new metrics at the end of the eviction test.
`trace_read_requests` is a per `Tenant`-object option.
But the `handle_pagerequests` loop doesn't know which
`Tenant` object (i.e., which shard) the request is for.
The remaining use of the `Tenant` object is to check `tenant.cancel`.
That check is incorrect [if the pageserver hosts multiple
shards](https://github.com/neondatabase/neon/issues/7427#issuecomment-2220577518).
I'll fix that in a future PR where I completely eliminate the holding
of `Tenant/Timeline` objects across requests.
See [my code RFC](https://github.com/neondatabase/neon/pull/8286) for
the
high level idea.
Note that we can always bring the tracing functionality if we need it.
But since it's actually about logging the `page_service` wire bytes,
it should be a `page_service`-level config option, not per-Tenant.
And for enabling tracing on a single connection, we can implement
a `set pageserver_trace_connection;` option.
## Problem
- The condition for eviction is not time-based: it is possible for a
timeline to be restored in response to a client, that client times out,
and then as soon as the timeline is restored it is immediately evicted
again.
- There is no delay on eviction at startup of the safekeeper, so when it
starts up and sees many idle timelines, it does many evictions which
will likely be immediately restored when someone uses the timeline.
## Summary of changes
- Add `eviction_min_resident` parameter, and use it in
`ready_for_eviction` to avoid evictions if the timeline has been
resident for less than this period.
- This also implicitly delays evictions at startup for
`eviction_min_resident`
- Set this to a very low number for the existing eviction test, which
expects immediate eviction.
The default period is 15 minutes. The general reasoning for that is that
in the worst case where we thrash ~10k timelines on one safekeeper,
downloading 16MB for each one, we should set a period that would not
overwhelm the node's bandwidth.
## Problem
This test incorrectly assumed that a post-split compaction would only
drop content. This was easily destabilized by any changes to image
generation rules.
## Summary of changes
- Before split, do a full image layer generation pass, to guarantee that
post-split compaction should only drop data, never create it.
- Fix the force_image_layer_creation mode of compaction that we use from
tests like this: previously it would try and generate image layers even
if one already existed with the same layer key, which caused compaction
to fail.
