Commit cfa45ff5ee (PR #8860) updated the vendor/postgres submodules, but
didn't use the same commit SHAs that were pushed as the corresponding
REL_*_STABLE_neon branches in the postgres repository. The contents were
the same, but the REL_*_STABLE_neon branches pointed to squashed
versions of the commits, whereas the SHAs used in the submodules
referred to the pre-squash revisions.
Note: The vendor/postgres-v14 submodule still doesn't match with the tip
of REL_14_STABLE_neon branch, because there has been one more commit on
that branch since then. That's another confusion which we should fix,
but let's do that separately. This commit doesn't change the code that
gets built in any way, only changes the submodule references to point to
the correct SHAs in the REL_*_STABLE_neon branch histories, rather than
some detached commits.
We currently do not record safekeepers in the storage controller
database. We want to migrate timelines across safekeepers eventually, so
start recording the safekeepers on deploy.
Cc: #8698
## Problem
Each test might wait for up to 5s in order to HB the pageserver.
## Summary of changes
Make the heartbeat interval configurable and use a really tight one for
neon local => startup quicker
ref https://github.com/neondatabase/neon/issues/8872
## Summary of changes
We saw stuck storage scrubber in staging caused by infinite retries. I
believe here we should use `min` instead of `max` to avoid getting
minutes or hours of retry backoff.
Signed-off-by: Alex Chi Z <chi@neon.tech>
Set the field to optional, otherwise there will be decode errors when
newer version of the storage controller receives the JSON from older
version of the pageservers.
Signed-off-by: Alex Chi Z <chi@neon.tech>
## Problem
Currently, DatadirModification keeps a key-indexed map of all pending
writes, even though we (almost) never need to read back dirty pages for
anything other than metadata pages (e.g. relation sizes).
Related: https://github.com/neondatabase/neon/issues/6345
## Summary of changes
- commit() modifications before ingesting database creation wal records,
so that they are guaranteed to be able to get() everything they need
directly from the underlying Timeline.
- Split dirty pages in DatadirModification into pending_metadata_pages
and pending_data_pages. The data ones don't need to be in a
key-addressable format, so they just go in a Vec instead.
- Special case handling of zero-page writes in DatadirModification,
putting them in a map which is flushed on the end of a WAL record. This
handles the case where during ingest, we might first write a zero page,
and then ingest a postgres write to that page. We used to do this via
the key-indexed map of writes, but in this PR we change the data page
write path to not bother indexing these by key.
My least favorite thing about this PR is that I needed to change the
DatadirModification interface to add the on_record_end call. This is not
very invasive because there's really only one place we use it, but it
changes the object's behaviour from being clearly an aggregation of many
records to having some per-record state. I could avoid this by
implicitly doing the work when someone calls set_lsn or commit -- I'm
open to opinions on whether that's cleaner or dirtier.
## Performance
There may be some efficiency improvement here, but the primary
motivation is to enable an earlier stage of ingest to operate without
access to a Timeline. The `pending_data_pages` part is the "fast path"
bulk write data that can in principle be generated without a Timeline,
in parallel with other ingest batches, and ultimately on the safekeeper.
`test_bulk_insert` on AX102 shows approximately the same results as in
the previous PR #8591:
```
------------------------------ Benchmark results -------------------------------
test_bulk_insert[neon-release-pg16].insert: 23.577 s
test_bulk_insert[neon-release-pg16].pageserver_writes: 5,428 MB
test_bulk_insert[neon-release-pg16].peak_mem: 637 MB
test_bulk_insert[neon-release-pg16].size: 0 MB
test_bulk_insert[neon-release-pg16].data_uploaded: 1,922 MB
test_bulk_insert[neon-release-pg16].num_files_uploaded: 8
test_bulk_insert[neon-release-pg16].wal_written: 1,382 MB
test_bulk_insert[neon-release-pg16].wal_recovery: 18.264 s
test_bulk_insert[neon-release-pg16].compaction: 0.052 s
```
wal_storage.rs already checks this, but since this is a quite legit scenario
check it at safekeeper.rs (consensus level) as well.
ref https://github.com/neondatabase/neon/issues/8212
This is a take 2; previous PR #8640 had been reverted because interplay
with another change broke test_last_log_term_switch.
Endpoint implementation sends msg to manager requesting to do the
reset. Manager stops current partial backup upload task if it exists and
performs the reset.
Also slightly tweak eviction condition: all full segments before
flush_lsn must be uploaded (and committed) and there must be only one
segment left on disk (partial). This allows to evict timelines which
started not on the first segment and didn't fill the whole
segment (previous condition wasn't good because last_removed_segno was
0).
ref https://github.com/neondatabase/neon/issues/8759
## Problem
Neon local set-up does not inject an az id in `metadata.json`. See real
change in https://github.com/neondatabase/neon/pull/8852.
## Summary of changes
We piggyback on the existing `availability_zone` pageserver
configuration in order to avoid making neon local even more complex.
## Problem
Metrics event idempotency keys differ across S3 and Vector. The events
should be identical.
Resolves#8605.
## Summary of changes
Pre-generate the idempotency keys and pass the same set into both
metrics sinks.
Co-authored-by: John Spray <john@neon.tech>
Implement the timeline specific `archival_config` endpoint also in the
storage controller.
It's mostly a copy-paste of the detach handler: the task is the same: do
the same operation on all shards.
Part of #8088.
## Problem
This is a followup to #8783
- The old blocking ensure_attached function had been retained to handle
the case where a shard had a None generation_pageserver, but this wasn't
really necessary.
- There was a subtle `.1` in the code where a struct would have been
clearer
Closes#8819
## Summary of changes
- Add ShardGenerationState to represent the results of peek_generation
- Instead of calling ensure_attached when a tenant has a non-attached
shard, check the shard's policy and return 409 if it isn't Attached,
else return 503 if the shard's policy is attached but it hasn't been
reconciled yet (i.e. has a None generation_pageserver)
The test is very rudimentary, it only checks that before and after
tenant deletion, we can run `scan_metadata` for the safekeeper node
kind. Also, we don't actually expect any uploaded data, for that we
don't have enough WAL (needs to create at least one S3-uploaded file,
the scrubber doesn't recognize partial files yet).
The `scan_metadata` scrubber subcommand is extended to support either
specifying a database connection string, which was previously the only
way, and required a database to be present, or specifying the timeline
information manually via json. This is ideal for testing scenarios
because in those, the number of timelines is usually limited,
but it is involved to spin up a database just to write the timeline
information.
The pull request https://github.com/neondatabase/neon/pull/8679
explicitly mentioned that it will evict layers earlier than before.
Given that the eviction metrics is solely based on eviction threshold
(which is 86400s now), we should consider the early eviction and do not
fire alert if it's a covered layer.
## Summary of changes
Record eviction timer only when the layer is visible + accessed.
Signed-off-by: Alex Chi Z <chi@neon.tech>
## Summary of changes
- Setting default io_buffer_alignment to 512 bytes.
- Fix places that assumed `DEFAULT_IO_BUFFER_ALIGNMENT=0`
- Adapt unit tests to handle merge with `chunk size <= 4096`.
## Testing and Performance
We have done sufficient performance de-risking.
Enabling it by default completes our correctness de-risking before the
next release.
Context: https://neondb.slack.com/archives/C07BZ38E6SD/p1725026845455259
Signed-off-by: Yuchen Liang <yuchen@neon.tech>
Co-authored-by: Christian Schwarz <christian@neon.tech>
When implementing bottom-most gc-compaction, we analyzed the structure
of layer maps that the current compaction algorithm could produce, and
decided to only support structures without delta layer overlaps and LSN
intersections with the exception of single key layers.
## Summary of changes
This patch adds the layer map valid check in the storage scrubber.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
## Problem
`promote-compatibility-data` job got broken and slightly outdated after
- https://github.com/neondatabase/neon/pull/8552 -- we don't upload
artifacts for ARM64
- https://github.com/neondatabase/neon/pull/8561 -- we don't prepare
`debug` artifacts in the release branch anymore
## Summary of changes
- Promote artifacts from release PRs to the latest version (but do it
from `release` branch)
- Upload artifacts for both X64 and ARM64
## Problem
Live migration retries when it fails to notify the compute of the new
location. It should sleep between attempts.
Closes: https://github.com/neondatabase/neon/issues/8820
## Summary of changes
- Do an `exponential_backoff` in the retry loop for compute
notifications
`safekeeper::random_test test_random_schedules` debug test takes over 2
minutes to run on our arm runners. Running it 6 times with pageserver
settings seems redundant.
In #8863 I replaced the threadpool with tokio tasks, but there was a
behaviour I missed regarding cancellation. Adding the JoinHandle wrapper
that triggers abort on drop should fix this.
Another change, any panics that occur in password hashing will be
propagated through the resume_unwind functionality.
Removes additional async_trait usages from safekeeper and neon_local.
Also removes now redundant dependencies of the `async_trait` crate.
cc earlier work: #6305, #6464, #7303, #7342, #7212, #8296
It's better to reject invalid keys on the write path than storing it and
panic-ing the pageserver.
https://github.com/neondatabase/neon/issues/8636
## Summary of changes
If a key cannot be represented using i128, we don't allow writing that
key into the pageserver.
There are two versions of the check valid function: the normal one that
simply rejects i128 keys, and the stronger one that rejects all keys
that we don't support.
The current behavior when a key gets rejected is that safekeeper will
keep retrying streaming that key to the pageserver. And once such key
gets written, no new computes can be started. Therefore, there could be
a large amount of pageserver warnings if a key cannot be ingested. To
validate this behavior by yourself, the reviewer can (1) use the
stronger version of the valid check (2) run the following SQL.
```
set neon.regress_test_mode = true;
CREATE TABLESPACE regress_tblspace LOCATION '/Users/skyzh/Work/neon-test/tablespace';
CREATE SCHEMA testschema;
CREATE TABLE testschema.foo (i int) TABLESPACE regress_tblspace;
insert into testschema.foo values (1), (2), (3);
```
For now, I'd like to merge the patch with only rejecting non-i128 keys.
It's still unknown whether the stronger version covers all the cases
that basebackup doesn't support. Furthermore, the behavior of rejecting
a key will produce large amounts of warnings due to safekeeper retry.
Therefore, I'd like to reject the minimum set of keys that we don't
support (i128 ones) for now. (well, erroring out is better than panic on
`to_compact_key`)
The next step is to fix the safekeeper behavior (i.e., on such key
rejections, stop streaming WAL), so that we can properly stop writing.
An alternative solution is to simply drop these keys on the write path.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
