## Problem
Storage controller didn't previously consider AZ locality between
compute and pageservers
when scheduling nodes. Control plane has this feature, and, since we are
migrating tenants
away from it, we need feature parity to avoid perf degradations.
## Summary of changes
The change itself is fairly simple:
1. Thread az info into the scheduler
2. Add an extra member to the scheduling scores
Step (2) deserves some more discussion. Let's break it down by the shard
type being scheduled:
**Attached Shards**
We wish for attached shards of a tenant to end up in the preferred AZ of
the tenant since that
is where the compute is like to be.
The AZ member for `NodeAttachmentSchedulingScore` has been placed
below the affinity score (so it's got the second biggest weight for
picking the node). The rationale for going
below the affinity score is to avoid having all shards of a single
tenant placed on the same node in 2 node
regions, since that would mean that one tenant can drive the general
workload of an entire pageserver.
I'm not 100% sure this is the right decision, so open to discussing
hoisting the AZ up to first place.
**Secondary Shards**
We wish for secondary shards of a tenant to be scheduled in a different
AZ from the preferred one
for HA purposes.
The AZ member for `NodeSecondarySchedulingScore` has been placed first,
so nodes in different AZs
from the preferred one will always be considered first. On small
clusters, this can mean that all the secondaries
of a tenant are scheduled to the same pageserver, but secondaries don't
use up as many resources as the
attached location, so IMO the argument made for attached shards doesn't
hold.
Related: https://github.com/neondatabase/neon/issues/8848
For control-plane managed tenants, we have the page in the admin console
that lists all tenants on a specific pageserver. But for
storage-controller managed ones, we don't have that functionality for
now.
## Summary of changes
Adds an API that lists all shards on a given node (intention + observed)
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
Addresses the 1.82 beta clippy lint `too_long_first_doc_paragraph` by
adding newlines to the first sentence if it is short enough, and making
a short first sentence if there is the need.
## Problem
We want to do AZ aware scheduling, but don't have enough metadata.
## Summary of changes
Introduce a `preferred_az_id` concept for each managed tenant shard.
In a future PR, the scheduler will use this as a soft preference.
The idea is to try and keep the shard attachments within the same AZ.
Under the assumption that the compute was placed in the correct AZ,
this reduces the chances of cross AZ trafic from between compute and PS.
In terms of code changes we:
1. Add a new nullable `preferred_az_id` column to the `tenant_shards`
table. Also include an in-memory counterpart.
2. Populate the preferred az on tenant creation and shard splits.
3. Add an endpoint which allows to bulk-set preferred AZs.
(3) gives us the migration path. I'll write a script which queries the
cplane db in the region and sets the preferred az of all shards with an
active compute to the AZ of said compute. For shards without an active compute,
I'll use the AZ of the currently attached pageserver
since this is what cplane uses now to schedule computes.
## Problem
https://github.com/neondatabase/neon/pull/8852 introduced a new nullable
column for the `nodes` table: `availability_zone_id`
## Summary of changes
* Make neon local and the test suite always provide an az id
* Make the az id field in the ps registration request mandatory
* Migrate the column to non-nullable and adjust in memory state
accordingly
* Remove the code that was used to populate the az id for pre-existing
nodes
## Problem
In order to build AZ aware scheduling, the storage controller needs to
know what AZ pageservers are in.
Related https://github.com/neondatabase/neon/issues/8848
## Summary of changes
This patch set adds a new nullable column to the `nodes` table:
`availability_zone_id`. The node registration
request is extended to include the AZ id (pageservers already have this
in their `metadata.json` file).
If the node is already registered, then we update the persistent and
in-memory state with the provided AZ.
Otherwise, we add the node with the AZ to begin with.
A couple assumptions are made here:
1. Pageserver AZ ids are stable
2. AZ ids do not change over time
Once all pageservers have a configured AZ, we can remove the optionals
in the code and make the database column not nullable.
## Problem
Previously, the controller only used the shard counts for scheduling.
This works well when hosting only many-sharded tenants, but works much
less well when hosting single-sharded tenants that have a greater
deviation in size-per-shard.
Closes: https://github.com/neondatabase/neon/issues/7798
## Summary of changes
- Instead of UtilizationScore, carry the full PageserverUtilization
through into the Scheduler.
- Use the PageserverUtilization::score() instead of shard count when
ordering nodes in scheduling.
Q: Why did test_sharding_split_smoke need updating in this PR?
A: There's an interesting side effect during shard splits: because we do
not decrement the shard count in the utilization when we de-schedule the
shards from before the split, the controller will now prefer to pick
_different_ nodes for shards compared with which ones held secondaries
before the split. We could use our knowledge of splitting to fix up the
utilizations more actively in this situation, but I'm leaning toward
leaving the code simpler, as in practical systems the impact of one
shard on the utilization of a node should be fairly low (single digit
%).
Per #8674, disallow node configuration while drain/fill are ongoing.
Implement it by adding a only-http wrapper
`Service::external_node_configure` which checks for operation existing
before configuring.
Additionally:
- allow cancelling drain/fill after a pageserver has restarted and
transitioned to WarmingUp
Fixes: #8674
Part of #8128, followup to #8480. closes#8421.
Enable scrubber to optionally post metadata scan health results to
storage controller.
Signed-off-by: Yuchen Liang <yuchen@neon.tech>
Part of #8128, followed by #8502.
## Problem
Currently we lack mechanism to alert unhealthy `scan_metadata` status if
we start running this scrubber command as part of a cronjob. With the
storage controller client introduced to storage scrubber in #8196, it is
viable to set up alert by storing health status in the storage
controller database.
We intentionally do not store the full output to the database as the
json blobs potentially makes the table really huge. Instead, only a
health status and a timestamp recording the last time metadata health
status is posted on a tenant shard.
Signed-off-by: Yuchen Liang <yuchen@neon.tech>
## Problem
Re-attach blocks the pageserver http server from starting up. Hence, it
can't reply to heartbeats
until that's done. This makes the storage controller mark the node
off-line (not good). We worked
around this by setting the interval after which nodes are marked offline
to 5 minutes. This isn't a
long term solution.
## Summary of changes
* Introduce a new `NodeAvailability` state: `WarmingUp`. This state
models the following time interval:
* From receiving the re-attach request until the pageserver replies to
the first heartbeat post re-attach
* The heartbeat delta generator becomes aware of this state and uses a
separate longer interval
* Flag `max-warming-up-interval` now models the longer timeout and
`max-offline-interval` the shorter one to
match the names of the states
Closes https://github.com/neondatabase/neon/issues/7552
## Problem
After a shard split, the pageserver leaves the ancestor shard's content
in place. It may be referenced by child shards, but eventually child
shards will de-reference most ancestor layers as they write their own
data and do GC. We would like to eventually clean up those ancestor
layers to reclaim space.
## Summary of changes
- Extend the physical GC command with `--mode=full`, which includes
cleaning up unreferenced ancestor shard layers
- Add test `test_scrubber_physical_gc_ancestors`
- Remove colored log output: in testing this is irritating ANSI code
spam in logs, and in interactive use doesn't add much.
- Refactor storage controller API client code out of storcon_client into
a `storage_controller/client` crate
- During physical GC of ancestors, call into the storage controller to
check that the latest shards seen in S3 reflect the latest state of the
tenant, and there is no shard split in progress.
## Problem
For some time, we have created tenants with calls to location_conf. The
legacy "POST /v1/tenant" path was only used in some tests.
## Summary of changes
- Remove the API
- Relocate TenantCreateRequest to the controller API file (this used to
be used in both pageserver and controller APIs)
- Rewrite tenant_create test helper to use location_config API, as
control plane and storage controller do
- Update docker-compose test script to create tenants with
location_config API (this small commit is also present in
https://github.com/neondatabase/neon/pull/7947)
## Problem
Pageserver restarts cause read availablity downtime for tenants. See
`Motivation` section in the
[RFC](https://github.com/neondatabase/neon/pull/7704).
## Summary of changes
* Introduce a new `NodeSchedulingPolicy`: `PauseForRestart`
* Implement the first take of drain and fill algorithms
* Add a node status endpoint which can be polled to figure out when an
operation is done
The implementation follows the RFC, so it might be useful to peek at it
as you're reviewing.
Since the PR is rather chunky, I've made sure all commits build (with
warnings), so you can
review by commit if you prefer that.
RFC: https://github.com/neondatabase/neon/pull/7704
Related https://github.com/neondatabase/neon/issues/7387
The binary etc were renamed some time ago, but the path in the source
tree remained "attachment_service" to avoid disruption to ongoing PRs.
There aren't any big PRs out right now, so it's a good time to cut over.
- Rename `attachment_service` to `storage_controller`
- Move it to the top level for symmetry with `storage_broker` & to avoid
mixing the non-prod neon_local stuff (`control_plane/`) with the storage
controller which is a production component.
## Problem
During incidents, we may need to quickly access the storage controller's
API without trying API client code or crafting `curl` CLIs on the fly. A
basic CLI client is needed for this.
## Summary of changes
- Update storage controller node listing API to only use public types in
controller_api.rs
- Add a storage controller API for listing tenants
- Add a basic test that the CLI can list and modify nodes and tenants.
## Problem
In the event of bugs with scheduling or reconciliation, we need to be
able to switch this off at a per-tenant granularity.
This is intended to mitigate risk of issues with
https://github.com/neondatabase/neon/pull/7181, which makes scheduling
more involved.
Closes: #7103
## Summary of changes
- Introduce a scheduling policy per tenant, with API to set it
- Refactor persistent.rs helpers for updating tenants to be more general
- Add tests
This is a mixed bag of changes split out for separate review while
working on other things, and batched together to reduce load on CI
runners. Each commits stands alone for review purposes:
- do_tenant_shard_split was a long function and had a synchronous
validation phase at the start that could readily be pulled out into a
separate function. This also avoids the special casing of
ApiError::BadRequest when deciding whether an abort is needed on errors
- Add a 'describe' API (GET on tenant ID) that will enable storcon-cli
to see what's going on with a tenant
- the 'locate' API wasn't really meant for use in the field. It's for
tests: demote it to the /debug/ prefix
- The `Single` placement policy was a redundant duplicate of Double(0),
and Double was a bad name. Rename it Attached.
(https://github.com/neondatabase/neon/issues/7107)
- Some neon_local commands were added for debug/demos, which are now
replaced by commands in storcon-cli (#7114 ). Even though that's not
merged yet, we don't need the neon_local ones any more.
Closes https://github.com/neondatabase/neon/issues/7107
## Backward compat of Single/Double -> `Attached(n)` change
A database migration is used to convert any existing values.
## Problem
If a pageserver was offline when the storage controller started, there
was no mechanism to update the
storage controller state when the pageserver becomes active.
## Summary of changes
* Add a heartbeater module. The heartbeater must be driven by an
external loop.
* Integrate the heartbeater into the service.
- Extend the types used by the service and scheduler to keep track of a
nodes' utilisation score.
- Add a background loop to drive the heartbeater and update the state
based on the deltas it generated
- Do an initial round of heartbeats at start-up
Not a user-facing change, but can break any existing `.neon` directories
created by neon_local, as the name of the database used by the storage
controller changes.
This PR changes all the locations apart from the path of
`control_plane/attachment_service` (waiting for an opportune moment to
do that one, because it's the most conflict-ish wrt ongoing PRs like
#6676 )
## Problem
Tenants created via the storage controller have a `PlacementPolicy` that
defines their HA/secondary/detach intent. For backward compat we can
just set it to Single, for onboarding tenants using /location_conf it is
automatically set to Double(1) if there are at least two pageservers,
but for freshly created tenants we didn't have a way to specify it.
This unblocks writing tests that create HA tenants on the storage
controller and do failure injection testing.
## Summary of changes
- Add optional fields to TenantCreateRequest for specifying
PlacementPolicy. This request structure is used both on pageserver API
and storage controller API, but this method is only meaningful for the
storage controller (same as existing `shard_parameters` attribute).
- Use the value from the creation request in tenant creation, if
provided.
## Problem
This is a precursor to adding a convenience CLI for the storage
controller.
## Summary of changes
- move controller api structs into pageserver_api::controller_api to
make them visible to other crates
- rename pageserver_api::control_api to pageserver_api::upcall_api to
match the /upcall/v1/ naming in the storage controller.
Why here rather than a totally separate crate? It's convenient to have
all the pageserver-related stuff in one place, and if we ever wanted to
move it to a different crate it's super easy to do that later.
