## Problem
When calling `./neon_local timeline` a confusing error message pops up:
`command failed: no tenant subcommand provided`
## Summary of changes
Add `add-help-for-timeline-arg` for timeline commands so when no
argument for the timeline is provided help is printed.
## Problem
During incidents, we may need to quickly access the storage controller's
API without trying API client code or crafting `curl` CLIs on the fly. A
basic CLI client is needed for this.
## Summary of changes
- Update storage controller node listing API to only use public types in
controller_api.rs
- Add a storage controller API for listing tenants
- Add a basic test that the CLI can list and modify nodes and tenants.
This is a mixed bag of changes split out for separate review while
working on other things, and batched together to reduce load on CI
runners. Each commits stands alone for review purposes:
- do_tenant_shard_split was a long function and had a synchronous
validation phase at the start that could readily be pulled out into a
separate function. This also avoids the special casing of
ApiError::BadRequest when deciding whether an abort is needed on errors
- Add a 'describe' API (GET on tenant ID) that will enable storcon-cli
to see what's going on with a tenant
- the 'locate' API wasn't really meant for use in the field. It's for
tests: demote it to the /debug/ prefix
- The `Single` placement policy was a redundant duplicate of Double(0),
and Double was a bad name. Rename it Attached.
(https://github.com/neondatabase/neon/issues/7107)
- Some neon_local commands were added for debug/demos, which are now
replaced by commands in storcon-cli (#7114 ). Even though that's not
merged yet, we don't need the neon_local ones any more.
Closes https://github.com/neondatabase/neon/issues/7107
## Backward compat of Single/Double -> `Attached(n)` change
A database migration is used to convert any existing values.
## Summary
- Currently we can set stripe size at tenant creation, but it doesn't
mean anything until we have multiple shards
- When onboarding an existing tenant, it will always get a default shard
stripe size, so we would like to be able to pick the actual stripe size
at the point we split.
## Why do this inline with a split?
The alternative to this change would be to have a separate endpoint on
the storage controller for setting the stripe size on a tenant, and only
permit writes to that endpoint when the tenant has only a single shard.
That would work, but be a little bit more work for a client, and not
appreciably simpler (instead of having a special argument to the split
functions, we'd have a special separate endpoint, and a requirement that
the controller must sync its config down to the pageserver before
calling the split API). Either approach would work, but this one feels a
bit more robust end-to-end: the split API is the _very last moment_ that
the stripe size is mutable, so if we aim to set it before splitting, it
makes sense to do it as part of the same operation.
## Problem
Currently we manually register nodes with the storage controller, and
use a script during deploy to register with the cloud control plane.
Rather than extend that script further, nodes should just register on
startup.
## Summary of changes
- Extend the re-attach request to include an optional
NodeRegisterRequest
- If the `register` field is set, handle it like a normal node
registration before executing the normal re-attach work.
- Update tests/neon_local that used to rely on doing an explicit
register step that could be enabled/disabled.
---------
Co-authored-by: Christian Schwarz <christian@neon.tech>
Not a user-facing change, but can break any existing `.neon` directories
created by neon_local, as the name of the database used by the storage
controller changes.
This PR changes all the locations apart from the path of
`control_plane/attachment_service` (waiting for an opportune moment to
do that one, because it's the most conflict-ish wrt ongoing PRs like
#6676 )
## Problem
Tenants created via the storage controller have a `PlacementPolicy` that
defines their HA/secondary/detach intent. For backward compat we can
just set it to Single, for onboarding tenants using /location_conf it is
automatically set to Double(1) if there are at least two pageservers,
but for freshly created tenants we didn't have a way to specify it.
This unblocks writing tests that create HA tenants on the storage
controller and do failure injection testing.
## Summary of changes
- Add optional fields to TenantCreateRequest for specifying
PlacementPolicy. This request structure is used both on pageserver API
and storage controller API, but this method is only meaningful for the
storage controller (same as existing `shard_parameters` attribute).
- Use the value from the creation request in tenant creation, if
provided.
## Problem
- The storage controller is the source of truth for a tenant's stripe
size, but doesn't currently have a way to propagate that to compute:
we're just using the default stripe size everywhere.
Closes: https://github.com/neondatabase/neon/issues/6903
## Summary of changes
- Include stripe size in `ComputeHookNotifyRequest`
- Include stripe size in `LocationConfigResponse`
The stripe size is optional: it will only be advertised for
multi-sharded tenants. This enables the controller to defer the choice
of stripe size until we split a tenant for the first time.
## Problem
This is a precursor to adding a convenience CLI for the storage
controller.
## Summary of changes
- move controller api structs into pageserver_api::controller_api to
make them visible to other crates
- rename pageserver_api::control_api to pageserver_api::upcall_api to
match the /upcall/v1/ naming in the storage controller.
Why here rather than a totally separate crate? It's convenient to have
all the pageserver-related stuff in one place, and if we ever wanted to
move it to a different crate it's super easy to do that later.
The sharding service didn't have support for S3 disaster recovery.
This PR adds a new endpoint to the attachment service, which is slightly
different from the endpoint on the pageserver, in that it takes the
shard count history of the tenant as json parameters: we need to do
time travel recovery for both the shard count at the target time and the
shard count at the current moment in time, as well as the past shard
counts that either still reference.
Fixes#6604, part of https://github.com/neondatabase/cloud/issues/8233
---------
Co-authored-by: John Spray <john@neon.tech>
This pull request adds two flags: `--update-catalog true` for `endpoint
create`, and `--create-test-user true` for `endpoint start`. The former
enables catalog updates for neon_superuser permission and many other
things, while the latter adds the user `test` and the database `neondb`
when setting up the database. A combination of these two flags will
create a Postgres similar to the production environment so that it would
be easier for us to test if extensions behave correctly when added to
Neon Postgres.
Example output:
```
❯ cargo neon endpoint start main --create-test-user true
Finished dev [unoptimized + debuginfo] target(s) in 0.22s
Running `target/debug/neon_local endpoint start main --create-test-user true`
Starting existing endpoint main...
Starting postgres node at 'postgresql://cloud_admin@127.0.0.1:55432/postgres'
Also at 'postgresql://user@127.0.0.1:55432/neondb'
```
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
## Problem
The ShardCount type has a magic '0' value that represents a legacy
single-sharded tenant, whose TenantShardId is formatted without a
`-0001` suffix (i.e. formatted as a traditional TenantId).
This was error-prone in code locations that wanted the actual number of
shards: they had to handle the 0 case specially.
## Summary of changes
- Make the internal value of ShardCount private, and expose `count()`
and `literal()` getters so that callers have to explicitly say whether
they want the literal value (e.g. for storing in a TenantShardId), or
the actual number of shards in the tenant.
---------
Co-authored-by: Arpad Müller <arpad-m@users.noreply.github.com>
In neon_local, the default mode is now always 'fast', regardless of
'destroy'. You can override it with the "neon_local endpoint stop
--mode=immediate" flag.
In python tests, we still default to 'immediate' mode when using the
stop_and_destroy() function, and 'fast' with plain stop(). I kept that
to avoid changing behavior in existing tests. I don't think existing
tests depend on it, but I wasn't 100% certain.
## Problem
One doesn't know at tenant creation time how large the tenant will grow.
We need to be able to dynamically adjust the shard count at runtime.
This is implemented as "splitting" of shards into smaller child shards,
which cover a subset of the keyspace that the parent covered.
Refer to RFC: https://github.com/neondatabase/neon/pull/6358
Part of epic: #6278
## Summary of changes
This PR implements the happy path (does not cleanly recover from a crash
mid-split, although won't lose any data), without any optimizations
(e.g. child shards re-download their own copies of layers that the
parent shard already had on local disk)
- Add `/v1/tenant/:tenant_shard_id/shard_split` API to pageserver: this
copies the shard's index to the child shards' paths, instantiates child
`Tenant` object, and tears down parent `Tenant` object.
- Add `splitting` column to `tenant_shards` table. This is written into
an existing migration because we haven't deployed yet, so don't need to
cleanly upgrade.
- Add `/control/v1/tenant/:tenant_id/shard_split` API to
attachment_service,
- Add `test_sharding_split_smoke` test. This covers the happy path:
future PRs will add tests that exercise failure cases.
## Problem
When we change which physical pageservers a tenant is attached to, we
must update the control plane so that it can update computes. This will
be done via an HTTP hook, as described in
https://www.notion.so/neondatabase/Sharding-Service-Control-Plane-interface-6de56dd310a043bfa5c2f5564fa98365#1fe185a35d6d41f0a54279ac1a41bc94
## Summary of changes
- Optional CLI args `--control-plane-jwt-token` and `-compute-hook-url`
are added. If these are set, then we will use this HTTP endpoint,
instead of trying to use neon_local LocalEnv to update compute
configuration.
- Implement an HTTP-driven version of ComputeHook that calls into the
configured URL
- Notify for all tenants on startup, to ensure that we don't miss
notifications if we crash partway through a change, and carry a
`pending_compute_notification` flag at runtime to allow notifications to
fail without risking never sending the update.
- Add a test for all this
One might wonder: why not do a "forever" retry for compute hook
notifications, rather than carrying a flag on the shard to call
reconcile() again later. The reason is that we will later limit
concurreny of reconciles, when dealing with larger numbers of shards,
and if reconcile is stuck waiting for the control plane to accept a
notification request, it could jam up the whole system and prevent us
making other changes. Anyway: from the perspective of the outside world,
we _do_ retry forever, but we don't retry forever within a given
Reconciler lifetime.
The `pending_compute_notification` logic is predicated on later adding a
background task that just calls `Service::reconcile_all` on a schedule
to make sure that anything+everything that can fail a
Reconciler::reconcile call will eventually be retried.
Depends on: https://github.com/neondatabase/neon/pull/6468
## Problem
The sharding service will be used as a "virtual pageserver" by the
control plane -- so it needs the set of pageserver APIs that the control
plane uses, and to present them under identical URLs, including prefix
(/v1).
## Summary of changes
- Add missing APIs:
- Tenant deletion
- Timeline deletion
- Node list (used in test now, later in tools)
- `/location_config` API (for migrating tenants into the sharding
service)
- Rework attachment service URLs:
- `/v1` prefix is used for pageserver-compatible APIs
- `/upcall/v1` prefix is used for APIs that are called by the pageserver
(re-attach and validate)
- `/debug/v1` prefix is used for endpoints that are for testing
- `/control/v1` prefix is used for new sharding service APIs that do not
mimic a pageserver API, such as registering and configuring nodes.
- Add test_sharding_service. The sharding service already had some
collateral coverage from its use in general tests, but this is the first
dedicated testing for it.
## Problem
Spun off from https://github.com/neondatabase/neon/pull/6394 -- this PR
is just the persistence parts and the changes that enable it to work
nicely
## Summary of changes
- Revert #6444 and #6450
- In neon_local, start a vanilla postgres instance for the attachment
service to use.
- Adopt `diesel` crate for database access in attachment service. This
uses raw SQL migrations as the source of truth for the schema, so it's a
soft dependency: we can switch libraries pretty easily.
- Rewrite persistence.rs to use postgres (via diesel) instead of JSON.
- Preserve JSON read+write at startup and shutdown: this enables using
the JSON format in compatibility tests, so that we don't have to commit
to our DB schema yet.
- In neon_local, run database creation + migrations before starting
attachment service
- Run the initial reconciliation in Service::spawn in the background, so
that the pageserver + attachment service don't get stuck waiting for
each other to start, when restarting both together in a test.
## Problem
To test sharding, we need something to control it. We could write python
code for doing this from the test runner, but this wouldn't be usable
with neon_local run directly, and when we want to write tests with large
number of shards/tenants, Rust is a better fit efficiently handling all
the required state.
This service enables automated tests to easily get a system with
sharding/HA without the test itself having to set this all up by hand:
existing tests can be run against sharded tenants just by setting a
shard count when creating the tenant.
## Summary of changes
Attachment service was previously a map of TenantId->TenantState, where
the principal state stored for each tenant was the generation and the
last attached pageserver. This enabled it to serve the re-attach and
validate requests that the pageserver requires.
In this PR, the scope of the service is extended substantially to do
overall management of tenants in the pageserver, including
tenant/timeline creation, live migration, evacuation of offline
pageservers etc. This is done using synchronous code to make declarative
changes to the tenant's intended state (`TenantState.policy` and
`TenantState.intent`), which are then translated into calls into the
pageserver by the `Reconciler`.
Top level summary of modules within
`control_plane/attachment_service/src`:
- `tenant_state`: structure that represents one tenant shard.
- `service`: implements the main high level such as tenant/timeline
creation, marking a node offline, etc.
- `scheduler`: for operations that need to pick a pageserver for a
tenant, construct a scheduler and call into it.
- `compute_hook`: receive notifications when a tenant shard is attached
somewhere new. Once we have locations for all the shards in a tenant,
emit an update to postgres configuration via the neon_local `LocalEnv`.
- `http`: HTTP stubs. These mostly map to methods on `Service`, but are
separated for readability and so that it'll be easier to adapt if/when
we switch to another RPC layer.
- `node`: structure that describes a pageserver node. The most important
attribute of a node is its availability: marking a node offline causes
tenant shards to reschedule away from it.
This PR is a precursor to implementing the full sharding service for
prod (#6342). What's the difference between this and a production-ready
controller for pageservers?
- JSON file persistence to be replaced with a database
- Limited observability.
- No concurrency limits. Marking a pageserver offline will try and
migrate every tenant to a new pageserver concurrently, even if there are
thousands.
- Very simple scheduler that only knows to pick the pageserver with
fewest tenants, and place secondary locations on a different pageserver
than attached locations: it does not try to place shards for the same
tenant on different pageservers. This matters little in tests, because
picking the least-used pageserver usually results in round-robin
placement.
- Scheduler state is rebuilt exhaustively for each operation that
requires a scheduler.
- Relies on neon_local mechanisms for updating postgres: in production
this would be something that flows through the real control plane.
---------
Co-authored-by: Arpad Müller <arpad-m@users.noreply.github.com>
The theme of the changes in this PR is that they're enablers for #6251
which are superficial struct/api changes.
This is a spinoff from #6251:
- Various APIs + clients thereof take TenantShardId rather than TenantId
- The creation API gets a ShardParameters member, which may be used to
configure shard count and stripe size. This enables the attachment
service to present a "virtual pageserver" creation endpoint that creates
multiple shards.
- The attachment service will use tenant size information to drive shard
splitting. Make a version of `TenantHistorySize` that is usable for
decoding these API responses.
- ComputeSpec includes a shard stripe size.
Part of getpage@lsn benchmark epic:
https://github.com/neondatabase/neon/issues/5771
This PR moves the control plane's spread-all-over-the-place client for
the pageserver management API into a separate module within the
pageserver crate.
I need that client to be async in my benchmarking work, so, this PR
switches to the async version of `reqwest`.
That is also the right direction generally IMO.
The switch to async in turn mandated converting most of the
`control_plane/` code to async.
Note that some of the client methods should be taking `TenantShardId`
instead of `TenantId`, but, none of the callers seem to be
sharding-aware.
Leaving that for another time:
https://github.com/neondatabase/neon/issues/6154
## Problem
In https://github.com/neondatabase/neon/pull/5957, the most essential
types were updated to use TenantShardId rather than TenantId. That
unblocked other work, but didn't fully enable running multiple shards
from the same tenant on the same pageserver.
## Summary of changes
- Use TenantShardId in page cache key for materialized pages
- Update mgr.rs get_tenant() and list_tenants() functions to use a shard
id, and update all callers.
- Eliminate the exactly_one_or_none helper in mgr.rs and all code that
used it
- Convert timeline HTTP routes to use tenant_shard_id
Note on page cache:
```
struct MaterializedPageHashKey {
/// Why is this TenantShardId rather than TenantId?
///
/// Usually, the materialized value of a page@lsn is identical on any shard in the same tenant. However, this
/// this not the case for certain internally-generated pages (e.g. relation sizes). In future, we may make this
/// key smaller by omitting the shard, if we ensure that reads to such pages always skip the cache, or are
/// special-cased in some other way.
tenant_shard_id: TenantShardId,
timeline_id: TimelineId,
key: Key,
}
```
## Problem
Some existing tests are written in a way that's incompatible with tenant
generations.
## Summary of changes
Update all the tests that need updating: this is things like calling
through the NeonPageserver.tenant_attach helper to get a generation
number, instead of calling directly into the pageserver API. There are
various more subtle cases.
This PR adds an `existing_initdb_timeline_id` option to timeline
creation APIs, taking an optional timeline ID.
Follow-up of #5390.
If the `existing_initdb_timeline_id` option is specified via the HTTP
API, the pageserver downloads the existing initdb archive from the given
timeline ID and extracts it, instead of running initdb itself.
---------
Co-authored-by: Christian Schwarz <christian@neon.tech>
`neon_local endpoint` subcommand currently allows creating two primary
endpoints for the same branch which leads to shutdown of both endpoints
`neon_local endpoint start` new behavior:
1. Fail if endpoint doesn't exist
2. Fail if two primary conflict detected
Fixes#4959Closes#5426
Signed-off-by: Rahul Modpur <rmodpur2@gmail.com>
Co-authored-by: Joonas Koivunen <joonas@neon.tech>
(includes two preparatory commits from
https://github.com/neondatabase/neon/pull/5960)
## Problem
To accommodate multiple shards in the same tenant on the same
pageserver, we must include the full TenantShardId in local paths. That
means that all code touching local storage needs to see the
TenantShardId.
## Summary of changes
- Replace `tenant_id: TenantId` with `tenant_shard_id: TenantShardId` on
Tenant, Timeline and RemoteTimelineClient.
- Use TenantShardId in helpers for building local paths.
- Update all the relevant call sites.
This doesn't update absolutely everything: things like PageCache,
TaskMgr, WalRedo are still shard-naive. The purpose of this PR is to
update the core types so that others code can be added/updated
incrementally without churning the most central shared types.
instead of direct S3 request.
Pros:
- simplify code a lot (no need to provide AWS credentials and paths);
- reduce latency of downloading extension data as proxy resides near
computes; -reduce AWS costs as proxy has cache and 1000 computes asking
the same extension will not generate 1000 downloads from S3.
- we can use only one S3 bucket to store extensions (and rid of regional
buckets which were introduced to reduce latency);
Changes:
- deprecate remote-ext-config compute_ctl parameter, use
http://pg-ext-s3-gateway if any old format remote-ext-cofig is provided;
- refactor tests to use mock http server;
## Problem
See #2592
## Summary of changes
Compresses the results of initdb into a .tar.zst file and uploads them
to S3, to enable usage in recovery from lsn.
Generations should not be involved I think because we do this only once
at the very beginning of a timeline.
---------
Co-authored-by: Joonas Koivunen <joonas@neon.tech>
(part of the getpage benchmarking epic #5771)
The plan is to make the benchmarking tool log on stderr and emit results
as JSON on stdout. That way, the test suite can simply take captures
stdout and json.loads() it, while interactive users of the benchmarking
tool have a reasonable experience as well.
Existing logging users continue to print to stdout, so, this change
should be a no-op functionally and performance-wise.
## Problem
Currently the only way to exercise tenant migration is via python test
code. We need a convenient way for developers to do it directly in a
neon local environment.
## Summary of changes
- Add a `--num-pageservers` argument to `cargo neon init` so that it's
easy to run with multiple pageservers
- Modify default pageserver overrides in neon_local to set up `LocalFs`
remote storage, as any migration/attach/detach stuff doesn't work in the
legacy local storage mode. This also unblocks removing the pageserver's
support for the legacy local mode.
- Add a new `cargo neon tenant migrate` command that orchestrates tenant
migration, including endpoints.
Minor changes from while I have been working on HA tests:
- Manual pytest executions came with some warnings from `log.warn()`
usage
- When something fails in a generations-enabled test, it it useful to
have a log from the attachment service of what attached when, and with
which generation.
---------
Co-authored-by: Joonas Koivunen <joonas@neon.tech>
## Problem
## Summary of changes
## Checklist before requesting a review
- [x] I have performed a self-review of my code.
- [ ] ~~If it is a core feature, I have added thorough tests.~~
- [ ] ~~Do we need to implement analytics? if so did you add the
relevant metrics to the dashboard?~~
- [ ] ~~If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.~~
## Checklist before merging
- [ ] Do not forget to reformat commit message to not include the above
checklist
## Problem
We currently require full restart of compute if we change the pageserver
url
## Summary of changes
Makes it so that we don't have to do a full restart, but can just send
SIGHUP
Part of #5172. First commits show that we used to allow starting up a
compute or creating a branch off a not yet uploaded timeline. This PR
moves activation of a timeline to happen **after** initial layer file(s)
(if any) and `index_part.json` have been uploaded. Simply moving
activation to be *after* downloads have finished works because we now
spawn a task per http request handler.
Current behaviour of uploading on the timelines on next startup is kept,
to be removed later as part of #5172.
Adds:
- `NeonCli.map_branch` and corresponding `neon_local` implementation:
allow creating computes for timelines managed via pageserver http
client/api
- possibly duplicate tests (I did not want to search for, will cleanup
in a follow-up if these duplicated)
Changes:
- make `wait_until_tenant_state` return immediatedly on `Broken` and not
wait more
## Problem
Fix neon_local pageserver status command
#5430
## Summary of changes
Fix clap config for pageserver status subcommand
## Checklist before requesting a review
- [x] I have performed a self-review of my code.
- [ ] If it is a core feature, I have added thorough tests.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [ ] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
Signed-off-by: Rahul Modpur <rmodpur2@gmail.com>
## Problem
Pageservers must not delete objects or advertise updates to
remote_consistent_lsn without checking that they hold the latest
generation for the tenant in question (see [the RFC](
https://github.com/neondatabase/neon/blob/main/docs/rfcs/025-generation-numbers.md))
In this PR:
- A new "deletion queue" subsystem is introduced, through which
deletions flow
- `RemoteTimelineClient` is modified to send deletions through the
deletion queue:
- For GC & compaction, deletions flow through the full generation
verifying process
- For timeline deletions, deletions take a fast path that bypasses
generation verification
- The `last_uploaded_consistent_lsn` value in `UploadQueue` is replaced
with a mechanism that maintains a "projected" lsn (equivalent to the
previous property), and a "visible" LSN (which is the one that we may
share with safekeepers).
- Until `control_plane_api` is set, all deletions skip generation
validation
- Tests are introduced for the new functionality in
`test_pageserver_generations.py`
Once this lands, if a pageserver is configured with the
`control_plane_api` configuration added in
https://github.com/neondatabase/neon/pull/5163, it becomes safe to
attach a tenant to multiple pageservers concurrently.
---------
Co-authored-by: Joonas Koivunen <joonas@neon.tech>
Co-authored-by: Christian Schwarz <christian@neon.tech>
## Problem
Currently our testing environment only supports running a single
pageserver at a time. This is insufficient for testing failover and
migrations.
- Dependency of writing tests for #5207
## Summary of changes
- `neon_local` and `neon_fixture` now handle multiple pageservers
- This is a breaking change to the `.neon/config` format: any local
environments will need recreating
- Existing tests continue to work unchanged:
- The default number of pageservers is 1
- `NeonEnv.pageserver` is now a helper property that retrieves the first
pageserver if there is only one, else throws.
- Pageserver data directories are now at `.neon/pageserver_{n}` where n
is 1,2,3...
- Compatibility tests get some special casing to migrate neon_local
configs: these are not meant to be backward/forward compatible, but they
were treated that way by the test.
## Problem
- #5050
Closes: https://github.com/neondatabase/neon/issues/5136
## Summary of changes
- A new configuration property `control_plane_api` controls other
functionality in this PR: if it is unset (default) then everything still
works as it does today.
- If `control_plane_api` is set, then on startup we call out to control
plane `/re-attach` endpoint to discover our attachments and their
generations. If an attachment is missing from the response we implicitly
detach the tenant.
- Calls to pageserver `/attach` API may include a `generation`
parameter. If `control_plane_api` is set, then this parameter is
mandatory.
- RemoteTimelineClient's loading of index_part.json is generation-aware,
and will try to load the index_part with the most recent generation <=
its own generation.
- The `neon_local` testing environment now includes a new binary
`attachment_service` which implements the endpoints that the pageserver
requires to operate. This is on by default if running `cargo neon` by
hand. In `test_runner/` tests, it is off by default: existing tests
continue to run with in the legacy generation-less mode.
Caveats:
- The re-attachment during startup assumes that we are only re-attaching
tenants that have previously been attached, and not totally new tenants
-- this relies on the control plane's attachment logic to keep retrying
so that we should eventually see the attach API call. That's important
because the `/re-attach` API doesn't tell us which timelines we should
attach -- we still use local disk state for that. Ref:
https://github.com/neondatabase/neon/issues/5173
- Testing: generations are only enabled for one integration test right
now (test_pageserver_restart), as a smoke test that all the machinery
basically works. Writing fuller tests that stress tenant migration will
come later, and involve extending our test fixtures to deal with
multiple pageservers.
- I'm not in love with "attachment_service" as a name for the neon_local
component, but it's not very important because we can easily rename
these test bits whenever we want.
- Limited observability when in re-attach on startup: when I add
generation validation for deletions in a later PR, I want to wrap up the
control plane API calls in some small client class that will expose
metrics for things like errors calling the control plane API, which will
act as a strong red signal that something is not right.
Co-authored-by: Christian Schwarz <christian@neon.tech>
Co-authored-by: Joonas Koivunen <joonas@neon.tech>
To this end add
1) -e option to 'neon_local safekeeper start' command appending extra options
to safekeeper invocation;
2) Allow multiple occurrences of the same option in safekeepers, the last
value is taken.
3) Allow to specify empty string for *-auth-public-key-path opts, it
disables auth for the service.
Add infrastructure to dynamically load postgres extensions and shared libraries from remote extension storage.
Before postgres start downloads list of available remote extensions and libraries, and also downloads 'shared_preload_libraries'. After postgres is running, 'compute_ctl' listens for HTTP requests to load files.
Postgres has new GUC 'extension_server_port' to specify port on which 'compute_ctl' listens for requests.
When PostgreSQL requests a file, 'compute_ctl' downloads it.
See more details about feature design and remote extension storage layout in docs/rfcs/024-extension-loading.md
---------
Co-authored-by: Anastasia Lubennikova <anastasia@neon.tech>
Co-authored-by: Alek Westover <alek.westover@gmail.com>
When we use local SSD for bench and create `.neon` directory before we
do `cargo neon init`, the initialization process will error due to
directory already exists. This PR adds a flag `--force` that removes
everything inside the directory if `.neon` already exists.
---------
Signed-off-by: Alex Chi Z. <chi@neon.tech>
This adds test coverage for 'compute_ctl', as it is now used by all
the python tests.
There are a few differences in how 'compute_ctl' is called in the
tests, compared to the real web console:
- In the tests, the postgresql.conf file is included as one large
string in the spec file, and it is written out as it is to the data
directory. I added a new field for that to the spec file. The real
web console, however, sets all the necessary settings in the
'settings' field, and 'compute_ctl' creates the postgresql.conf from
those settings.
- In the tests, the information needed to connect to the storage, i.e.
tenant_id, timeline_id, connection strings to pageserver and
safekeepers, are now passed as new fields in the spec file. The real
web console includes them as the GUCs in the 'settings' field. (Both
of these are different from what the test control plane used to do:
It used to write the GUCs directly in the postgresql.conf file). The
plan is to change the control plane to use the new method, and
remove the old method, but for now, support both.
Some tests that were sensitive to the amount of WAL generated needed
small changes, to accommodate that compute_ctl runs the background
health monitor which makes a few small updates. Also some tests shut
down the pageserver, and now that the background health check can run
some queries while the pageserver is down, that can produce a few
extra errors in the logs, which needed to be allowlisted.
Other changes:
- remove obsolete comments about PostgresNode;
- create standby.signal file for Static compute node;
- log output of `compute_ctl` and `postgres` is merged into
`endpoints/compute.log`.
---------
Co-authored-by: Anastasia Lubennikova <anastasia@neon.tech>
It's more convenient than parsing the postgresql.conf file.
Extracted from PR #3886. I started working on another patch (to make it
safe to run two "neon_local endpoint create" commands concurrently), and
realized that this change will make that simpler too.
Notes:
- This still needs UI support from the Console
- I've not tuned any GUCs for PostgreSQL to make this work better
- Safekeeper has gotten a tweak in which WAL is sent and how: It now
sends zero-ed WAL data from the start of the timeline's first segment up to
the first byte of the timeline to be compatible with normal PostgreSQL
WAL streaming.
- This includes the commits of #3714
Fixes one part of https://github.com/neondatabase/neon/issues/769
Co-authored-by: Anastasia Lubennikova <anastasia@neon.tech>
We use the term "endpoint" in for compute Postgres nodes in the web UI
and user-facing documentation now. Adjust the nomenclature in the code.
This changes the name of the "neon_local pg" command to "neon_local
endpoint". Also adjust names of classes, variables etc. in the python
tests accordingly.
This also changes the directory structure so that endpoints are now
stored in:
.neon/endpoints/<endpoint id>
instead of:
.neon/pgdatadirs/tenants/<tenant_id>/<endpoint (node) name>
The tenant ID is no longer part of the path. That means that you
cannot have two endpoints with the same name/ID in two different
tenants anymore. That's consistent with how we treat endpoints in the
real control plane and proxy: the endpoint ID must be globally unique.
