Control Plane currently [^1] polls for `has_in_progress_downloads ==
false` after /attach to determine that an attach operation succeeded.
As pointed out in the OpenAPI spec as of neon#4151, polling for
`has_in_progress_downloads` is incorrect.
This patch changes the situation by
- removing `has_in_progress_downloads`
- adding a new field `attachment_status.`
- changing instructions for `/attach` to poll for `attachment_status ==
attached`.
This makes the instructions in `/attach` actionable for Control Plane.
NB that we don't expose the TenantState in the OpenAPI docs, even though
we expose it in the endpoint. That is with good reason because we don't
want to commit to a fixed set of tenant states forever. Hence, the
separate `attachment_status` field that exposes the bare minimum
required to make /attach + subsequent polling 100% safe wrt split brain.
It would have been nice to report failures explicitly, but the problem
is that we lose that state when we restart. So, we return `attached`
upon attach failure. The tenant is Broken in that case, causing Control
Plane's subsequent health check will fail. Control Plane can roll back
the relocation operation then.
NB: the reliance on the subsequent health check is no change to what we
had before this patch!
NB: we can always add additional TenantAttachmentStatus'es in the future
to communicate failure.
This PR also moves the attach-marker file's creation to the API
handler's synchronous part. That was done to avoid the need to
distinguish
* `Attaching but marker not yet written => AttachmentStatus::Maybe` from
* `Attaching, marker written, but attach failed for other reason =>
AttachmentStatus::Attached`
Coincidentally, this also adds more transactionality to the /attach API
because we only return 202 once we've written the marker file. But, in
the end, it doesn't affect how the control plane interacts with us or
how it needs to do retries. So, we don't mention any of this in the API
docs.
[^1]: The one-click tenant relocation PR cloud#4740, currently WIP, is
the first real user.
Before this patch, if a tenant would override its eviction_policy
setting to use a lower LayerAccessThreshold::threshold than the
`evictions_low_residence_duration_metric_threshold`, the evictions done
for that tenant would count towards the
`evictions_with_low_residence_duration` metric.
That metric is used to identify pre-mature evictions, commonly triggered
by disk-usage-based eviction under disk pressure.
We don't want that to happen for the legitimate evictions of the tenant
that overrides its eviction_policy.
So, this patch
- moves the setting into TenantConf
- adds test coverage
- updates the staging & prod yamls
Forward Compatibility:
Software before this patch will ignore the new tenant conf field and use
the global one instead.
So we can roll back safely.
Backward Compatibility:
Parsing old configs with software as of this patch will fail in
`PageServerConf::parse_and_validate` with error
`unrecognized pageserver option 'evictions_low_residence_duration_metric_threshold'`
if the option is still present in the global section.
We deal with this by updating the configs in Ansible.
fixes https://github.com/neondatabase/neon/issues/3940
Reason and backtrace are added to the Broken state. Backtrace is automatically collected when tenant entered the broken state. The format for API, CLI and metrics is changed and unified to return tenant state name in camel case. Previously snake case was used for metrics and camel case was used for everything else. Now tenant state field in TenantInfo swagger spec is changed to contain state name in "slug" field and other fields (currently only reason and backtrace for Broken variant in "data" field). To allow for this breaking change state was removed from TenantInfo swagger spec because it was not used anywhere.
Please note that the tenant's broken reason is not persisted on disk so the reason is lost when pageserver is restarted.
Requires changes to grafana dashboard that monitors tenant states.
Closes#3001
---------
Co-authored-by: theirix <theirix@gmail.com>
This patch adds a pageserver-global background loop that evicts layers
in response to a shortage of available bytes in the $repo/tenants
directory's filesystem.
The loop runs periodically at a configurable `period`.
Each loop iteration uses `statvfs` to determine filesystem-level space
usage. It compares the returned usage data against two different types
of thresholds. The iteration tries to evict layers until app-internal
accounting says we should be below the thresholds. We cross-check this
internal accounting with the real world by making another `statvfs` at
the end of the iteration. We're good if that second statvfs shows that
we're _actually_ below the configured thresholds. If we're still above
one or more thresholds, we emit a warning log message, leaving it to the
operator to investigate further.
There are two thresholds:
- `max_usage_pct` is the relative available space, expressed in percent
of the total filesystem space. If the actual usage is higher, the
threshold is exceeded.
- `min_avail_bytes` is the absolute available space in bytes. If the
actual usage is lower, the threshold is exceeded.
The iteration evicts layers in LRU fashion with a reservation of up to
`tenant_min_resident_size` bytes of the most recent layers per tenant.
The layers not part of the per-tenant reservation are evicted
least-recently-used first until we're below all thresholds. The
`tenant_min_resident_size` can be overridden per tenant as
`min_resident_size_override` (bytes).
In addition to the loop, there is also an HTTP endpoint to perform one
loop iteration synchronous to the request. The endpoint takes an
absolute number of bytes that the iteration needs to evict before
pressure is relieved. The tests use this endpoint, which is a great
simplification over setting up loopback-mounts in the tests, which would
be required to test the statvfs part of the implementation. We will rely
on manual testing in staging to test the statvfs parts.
The HTTP endpoint is also handy in emergencies where an operator wants
the pageserver to evict a given amount of space _now. Hence, it's
arguments documented in openapi_spec.yml. The response type isn't
documented though because we don't consider it stable. The endpoint
should _not_ be used by Console but it could be used by on-call.
Co-authored-by: Joonas Koivunen <joonas@neon.tech>
Co-authored-by: Dmitry Rodionov <dmitry@neon.tech>
Co-authored-by: Heikki Linnakangas <heikki@neon.tech>
The PR enforces current newest `index_part.json` format in the type
system (version `1`), not allowing any previous forms of it, that were
used in the past.
Similarly, the code to mitigate the
https://github.com/neondatabase/neon/issues/3024 issue is now also
removed.
Current code does not produce old formats and extra files in the
index_part.json, in the future we will be able to use
https://github.com/neondatabase/aversion or other approach to make
version transitions more explicit.
See https://neondb.slack.com/archives/C033RQ5SPDH/p1679134185248119 for
the justification on the breaking changes.
This patch adds a per-timeline periodic task that executes an eviction
policy. The eviction policy is configurable per tenant.
Two policies exist:
- NoEviction (the default one)
- LayerAccessThreshold
The LayerAccessThreshold policy examines the last access timestamp per
layer in the layer map and evicts the layer if that last access is
further in the past than a configurable threshold value.
This policy kind is evaluated periodically at a configurable period.
It logs a summary statistic at `info!()` or `warn!()` level, depending
on whether any evictions failed.
This feature has no explicit killswitch since it's off by default.
This patch adds basic access statistics for historic layers
and exposes them in the management API's `LayerMapInfo`.
We record the accesses in the `{Delta,Image}Layer::load()` function
because it's the common path of
* page_service (`Timline::get_reconstruct_data()`)
* Compaction (`PersistentLayer::iter()` and `PersistentLayer::key_iter()`)
The stats survive residence status changes, and record these as well.
When scraping the layer map endpoint to record its evolution over time,
one must account for stat resets because they are in-memory only and
will reset on pageserver restart.
Use the launch timestamp header added by (#3527) to identify pageserver restarts.
This is PR https://github.com/neondatabase/neon/pull/3496
The PR adds an endpoint to show tenant's current config: `GET
/v1/tenant/:tenant_id/config`
Tenant's config consists of two parts: tenant overrides (could be
changed via other management API requests) and the default part,
substituting all missing overrides (constant, hardcoded in pageserver).
The API returns the custom overrides and the final tenant config, after
applying all the defaults.
Along the way, it had to fix two things in the config:
* allow to shorten the json version and omit all `null`'s (same as toml
serializer behaves by default), and to understand such shortened format
when deserialized. A unit test is added
* fix a bug, when `PUT /v1/tenant/config` endpoint rewritten the local
file with what had came in the request, but updating (not rewriting the
old values) the in-memory state instead.
That got uncovered during adjusting the e2e test and fixed to do the
replacement everywhere, otherwise there's no way to revert existing
overrides. Fixes#3471 (commit
dc688affe8)
* fixes https://github.com/neondatabase/neon/issues/3472 by reordering
the config saving operations
Closes https://github.com/neondatabase/neon/issues/3439
Adds a set of commands to manipulate the layer map:
* dump the layer map contents
* evict the layer form the layer map (remove the local file, put the
remote layer instead in the layer map)
* download the layer (operation, reversing the eviction)
The commands will change later, when the statistics is added on top, so
the swagger schema is not adjusted.
The commands might have issues with big amount of layers: no pagination
is done for the dump command, eviction and download commands look for
the layer to evict/download by iterating all layers sequentially and
comparing the layer names.
For now, that seems to be tolerable ("big" number of layers is ~2_000)
and further experiments are needed.
---------
Co-authored-by: Christian Schwarz <christian@neon.tech>
## Describe your changes
Added a metric that allow to monitor tenants state
## Issue ticket number and link
https://github.com/neondatabase/neon/issues/3161
## Checklist before requesting a review
- [X] I have performed a self-review of my code.
- [X] I have added an e2e test for it.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [ ] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
The TimelineState::Suspsended was dubious to begin with. I suppose
that the intention was that timelines could transition back and
forth between Active and Suspended states.
But practically, the code before this patch never did that.
The transitions were:
() ==Timeline::new==> Suspended ==*==> {Active,Broken,Stopping}
One exception: Tenant::set_stopping() could transition timelines like
so:
!Broken ==Tenant::set_stopping()==> Suspended
But Tenant itself cannot transition from stopping state to any other
state.
Thus, this patch removes TimelineState::Suspended and introduces a new
state Loading. The aforementioned transitions change as follows:
- () ==Timeline::new==> Suspended ==*==> {Active,Broken,Stopping}
+ () ==Timeline::new==> Loading ==*==> {Active,Broken,Stopping}
- !Broken ==Tenant::set_stopping()==> Suspended
+ !Broken ==Tenant::set_stopping()==> Stopping
Walreceiver's connection manager loop watches TimelineState to decide
whether it should retry connecting, or exit.
This patch changes the loop to exit when it observes the transition
into Stopping state.
Walreceiver isn't supposed to be started until the timeline transitions
into Active state. So, this patch also adds some warn!() messages
in case this happens anyways.
Before this patch, we would start all layer downloads simultaneously.
There is at most one download_all_remote_layers task per timeline.
Hence, the specified limit is per timeline.
There is still no global concurrency limit for layer downloads.
We'll have to revisit that at some point and also prioritize on-demand
initiated downloads over download_all_remote_layers downloads.
But that's for another day.
1.66 release speeds up compile times for over 10% according to tests.
Also its Clippy finds plenty of old nits in our code:
* useless conversion, `foo as u8` where `foo: u8` and similar, removed
`as u8` and similar
* useless references and dereferenced (that were automatically adjusted
by the compiler), removed various `&` and `*`
* bool -> u8 conversion via `if/else`, changed to `u8::from`
* Map `.iter()` calls where only values were used, changed to
`.values()` instead
Standing out lints:
* `Eq` is missing in our protoc generated structs. Silenced, does not
seem crucial for us.
* `fn default` looks like the one from `Default` trait, so I've
implemented that instead and replaced the `dummy_*` method in tests with
`::default()` invocation
* Clippy detected that
```
if retry_attempt < u32::MAX {
retry_attempt += 1;
}
```
is a saturating add and proposed to replace it.
The code in this change was extracted from #2595 (Heikki’s on-demand
download draft PR).
High-Level Changes
- New RemoteLayer Type
- On-Demand Download As An Effect Of Page Reconstruction
- Breaking Semantics For Physical Size Metrics
There are several follow-up work items planned.
Refer to the Epic issue on GitHub: https://github.com/neondatabase/neon/issues/2029
closes https://github.com/neondatabase/neon/pull/3013
Co-authored-by: Kirill Bulatov <kirill@neon.tech>
Co-authored-by: Christian Schwarz <christian@neon.tech>
New RemoteLayer Type
====================
Instead of downloading all layers during tenant attach, we create
RemoteLayer instances for each of them and add them to the layer map.
On-Demand Download As An Effect Of Page Reconstruction
======================================================
At the heart of pageserver is Timeline::get_reconstruct_data(). It
traverses the layer map until it has collected all the data it needs to
produce the page image. Most code in the code base uses it, though many
layers of indirection.
Before this patch, the function would use synchronous filesystem IO to
load data from disk-resident layer files if the data was not cached.
That is not possible with RemoteLayer, because the layer file has not
been downloaded yet. So, we do the download when get_reconstruct_data
gets there, i.e., “on demand”.
The mechanics of how the download is done are rather involved, because
of the infamous async-sync-async sandwich problem that plagues the async
Rust world. We use the new PageReconstructResult type to work around
this. Its introduction is the cause for a good amount of code churn in
this patch. Refer to the block comment on `with_ondemand_download()`
for details.
Breaking Semantics For Physical Size Metrics
============================================
We rename prometheus metric pageserver_{current,resident}_physical_size to
reflect what this metric actually represents with on-demand download.
This intentionally BREAKS existing grafana dashboard and the cost model data
pipeline. Breaking is desirable because the meaning of this metrics has changed
with on-demand download. See
https://docs.google.com/document/d/12AFpvKY-7FZdR5a4CaD6Ir_rI3QokdCLSPJ6upHxJBo/edit#
for how we will handle this breakage.
Likewise, we rename the new billing_metrics’s PhysicalSize => ResidentSize.
This is not yet used anywhere, so, this is not a breaking change.
There is still a field called TimelineInfo::current_physical_size. It
is now the sum of the layer sizes in layer map, regardless of whether
local or remote. To compute that sum, we added a new trait method
PersistentLayer::file_size().
When updating the Python tests, we got rid of
current_physical_size_non_incremental. An earlier commit removed it from
the OpenAPI spec already, so this is not a breaking change.
test_timeline_size.py has grown additional assertions on the
resident_physical_size metric.
It used to be a separate piece of state, but after 9a6c0be823 it's just
an alias for the Tenant being in Attaching state. It was only used in
one assertion in a test, but that check doesn't make sense anymore, so
just remove it.
Fixes https://github.com/neondatabase/neon/issues/2930
I'm not a fan of "Paused", for two reasons:
- Paused implies that the tenant/timeline with no activity on it. That's
not true; the tenant/timeline can still have active tasks working on it.
- Paused implies that it can be resumed later. It can not. A tenant or
timeline in this state cannot be switched back to Active state anymore.
A completely new Tenant or Timeline struct can be constructed for the
same tenant or timeline later, e.g. if you detach and later re-attach
the same tenant, but that's a different thing.
Stopping describes the state better. I also considered "ShuttingDown",
but Stopping is simpler as it's a single word.
The code in this change was extracted from PR #2595, i.e., Heikki’s draft
PR for on-demand download.
High-Level Changes
- storage_sync module rewrite
- Changes to Tenant Loading
- Changes to Timeline States
- Crash-safe & Resumable Tenant Attach
There are several follow-up work items planned.
Refer to the Epic issue on GitHub:
https://github.com/neondatabase/neon/issues/2029
Metadata:
closes https://github.com/neondatabase/neon/pull/2785
unsquashed history of this patch: archive/pr-2785-storage-sync2/pre-squash
Co-authored-by: Dmitry Rodionov <dmitry@neon.tech>
Co-authored-by: Christian Schwarz <christian@neon.tech>
===============================================================================
storage_sync module rewrite
===========================
The storage_sync code is rewritten. New module name is storage_sync2, mostly to
make a more reasonable git diff.
The updated block comment in storage_sync2.rs describes the changes quite well,
so, we will not reproduce that comment here. TL;DR:
- Global sync queue and RemoteIndex are replaced with per-timeline
`RemoteTimelineClient` structure that contains a queue for UploadOperations
to ensure proper ordering and necessary metadata.
- Before deleting local layer files, wait for ongoing UploadOps to finish
(wait_completion()).
- Download operations are not queued and executed immediately.
Changes to Tenant Loading
=========================
Initial sync part was rewritten as well and represents the other major change
that serves as a foundation for on-demand downloads. Routines for attaching and
loading shifted directly to Tenant struct and now are asynchronous and spawned
into the background.
Since this patch doesn’t introduce on-demand download of layers we fully
synchronize with the remote during pageserver startup. See details in
`Timeline::reconcile_with_remote` and `Timeline::download_missing`.
Changes to Tenant States
========================
The “Active” state has lost its “background_jobs_running: bool” member. That
variable indicated whether the GC & Compaction background loops are spawned or
not. With this patch, they are now always spawned. Unit tests (#[test]) use the
TenantConf::{gc_period,compaction_period} to disable their effect (15db566).
This patch introduces a new tenant state, “Attaching”. A tenant that is being
attached starts in this state and transitions to “Active” once it finishes
download.
The `GET /tenant` endpoints returns `TenantInfo::has_in_progress_downloads`. We
derive the value for that field from the tenant state now, to remain
backwards-compatible with cloud.git. We will remove that field when we switch
to on-demand downloads.
Changes to Timeline States
==========================
The TimelineInfo::awaits_download field is now equivalent to the tenant being
in Attaching state. Previously, download progress was tracked per timeline.
With this change, it’s only tracked per tenant. When on-demand downloads
arrive, the field will be completely obsolete. Deprecation is tracked in
isuse #2930.
Crash-safe & Resumable Tenant Attach
====================================
Previously, the attach operation was not persistent. I.e., when tenant attach
was interrupted by a crash, the pageserver would not continue attaching after
pageserver restart. In fact, the half-finished tenant directory on disk would
simply be skipped by tenant_mgr because it lacked the metadata file (it’s
written last). This patch introduces an “attaching” marker file inside that is
present inside the tenant directory while the tenant is attaching. During
pageserver startup, tenant_mgr will resume attach if that file is present. If
not, it assumes that the local tenant state is consistent and tries to load the
tenant. If that fails, the tenant transitions into Broken state.
Similar to https://github.com/neondatabase/neon/pull/2395, introduces a state field in Timeline, that's possible to subscribe to.
Adjusts
* walreceiver to not to have any connections if timeline is not Active
* remote storage sync to not to schedule uploads if timeline is Broken
* not to create timelines if a tenant/timeline is broken
* automatically switches timelines' states based on tenant state
Does not adjust timeline's gc, checkpointing and layer flush behaviour much, since it's not safe to cancel these processes abruptly and there's task_mgr::shutdown_tasks that does similar thing.
* etcd-client is not updated, since we plan to replace it with another client and the new version errors with some missing prost library error
* clap had released another major update that requires changing every CLI declaration again, deserves a separate PR
The 'local' part was always filled in, so that was easy to merge into
into the TimelineInfo itself. 'remote' only contained two fields,
'remote_consistent_lsn' and 'awaits_download'. I made
'remote_consistent_lsn' an optional field, and 'awaits_download' is now
false if the timeline is not present remotely.
However, I kept stub versions of the 'local' and 'remote' structs for
backwards-compatibility, with a few fields that are actively used by
the control plane. They just duplicate the fields from TimelineInfo
now. They can be removed later, once the control plane has been
updated to use the new fields.
It was only None when you queried the status of a timeline with
'timeline_detail' mgmt API call, and it was still being downloaded. You
can check for that status with the 'tenant_status' API call instead,
checking for has_in_progress_downloads field.
Anothere case was if an error happened while trying to get the current
logical size, in a 'timeline_detail' request. It might make sense to
tolerate such errors, and leave the fields we cannot fill in as empty,
None, 0 or similar, but it doesn't make sense to me to leave the whole
'local' struct empty in tht case.
Creates new `pageserver_api` and `safekeeper_api` crates to serve as the
shared dependencies. Should reduce both recompile times and cold compile
times.
Decreases the size of the optimized `neon_local` binary: 380M -> 179M.
No significant changes for anything else (mostly as expected).
