I observe sporadic reconnections with ~10k idle computes. It looks like a
separate issue, probably walreceiver runtime gets blocked somewhere, but in any
case 2-3 seconds is too small.
## Problem
`pytest-timeout` and `pytest-rerunfailures` are incompatible (or rather
not fully compatible). Timeouts aren't set for reruns.
Ref https://github.com/pytest-dev/pytest-rerunfailures/issues/99
## Summary of changes
- Dynamically make timeouts `func_only` for tests that we're going to
retry. It applies timeouts for reruns as well.
## Problem
1. During the rollout we got a panic: "timeline that we were deleting
was concurrently removed from 'timelines' map" that was caused by lock
guard not being propagated to the background part of the deletion.
Existing test didnt catch it because failpoint that was used for
verification was placed earlier prior to background task spawning.
2. When looking at surrounding code one more bug was detected. We
removed timeline from the map before deletion is finished, which breaks
client retry logic, because it will indicate 404 before actual deletion
is completed which can lead to client stopping its retry poll earlier.
## Summary of changes
1. Carry the lock guard over to background deletion. Ensure existing
test case fails without applied patch (second deletion becomes stuck
without it, which eventually leads to a test failure).
2. Move delete_all call earlier so timeline is removed from the map is
the last thing done during deletion.
Additionally I've added timeline_id to the `update_gc_info` span,
because `debug_assert_current_span_has_tenant_and_timeline_id` in
`download_remote_layer` was firing when `update_gc_info` lead to
on-demand downloads via `find_lsn_for_timestamp` (caught by @problame).
This is not directly related to the PR but fixes possible flakiness.
Another smaller set of changes involves deletion wrapper used in python
tests. Now there is a simpler wrapper that waits for deletions to
complete `timeline_delete_wait_completed`. Most of the
test_delete_timeline.py tests make negative tests, i.e., "does
ps_http.timeline_delete() fail in this and that scenario".
These can be left alone. Other places when we actually do the deletions,
we need to use the helper that polls for completion.
Discussion
https://neondb.slack.com/archives/C03F5SM1N02/p1686668007396639resolves#4496
---------
Co-authored-by: Christian Schwarz <christian@neon.tech>
## Problem
Some metrics are better to be observed at page-server level. Otherwise,
as we have a lot of tenants in production, we cannot do a sum b/c
Prometheus has limit on how many time series we can aggregate. This also
helps reduce metrics scraping size.
## Summary of changes
Some integration tests are likely not to pass as it will check the
existence of some metrics. Waiting for CI complete and fix them.
Metrics downgraded: page cache hit (where we are likely to have a
page-server level page cache in the future instead of per-tenant), and
reconstruct time (this would better be tenant-level, as we have one pg
replayer for each tenant, but now we make it page-server level as we do
not need that fine-grained data).
---------
Signed-off-by: Alex Chi <iskyzh@gmail.com>
With this commit client can pass following optional headers:
`Neon-Raw-Text-Output: true`. Return postgres values as text, without parsing them. So numbers, objects, booleans, nulls and arrays will be returned as text. That can be useful in cases when client code wants to implement it's own parsing or reuse parsing libraries from e.g. node-postgres.
`Neon-Array-Mode: true`. Return postgres rows as arrays instead of objects. That is more compact representation and also helps in some edge
cases where it is hard to use rows represented as objects (e.g. when several fields have the same name).
Delete data from s3 when timeline deletion is requested
## Summary of changes
UploadQueue is altered to support scheduling of delete operations in
stopped state. This looks weird, and I'm thinking whether there are
better options/refactorings for upload client to make it look better.
Probably can be part of https://github.com/neondatabase/neon/issues/4378
Deletion is implemented directly in existing endpoint because changes are not
that significant. If we want more safety we can separate those or create
feature flag for new behavior.
resolves [#4193](https://github.com/neondatabase/neon/issues/4193)
---------
Co-authored-by: Joonas Koivunen <joonas@neon.tech>
## Problem
Attach failures are not reported in public part of the api (in
`attachment_status` field of TenantInfo).
## Summary of changes
Expose TenantState::Broken as TenantAttachmentStatus::Failed
In the way its written Failed status will be reported even if no
attachment happened. (I e if tenant become broken on startup). This is
in line with other members. I e Active will be resolved to Attached even
if no actual attach took place.
This can be tweaked if needed. At the current stage it would be overengineering without clear motivation
resolves#4344
Initial logical size calculation could still hinder our fast startup
efforts in #4397. See #4183. In deployment of 2023-06-06
about a 200 initial logical sizes were calculated on hosts which
took the longest to complete initial load (12s).
Implements the three step/tier initialization ordering described in
#4397:
1. load local tenants
2. do initial logical sizes per walreceivers for 10s
3. background tasks
Ordering is controlled by:
- waiting on `utils::completion::Barrier`s on background tasks
- having one attempt for each Timeline to do initial logical size
calculation
- `pageserver/src/bin/pageserver.rs` releasing background jobs after
timeout or completion of initial logical size calculation
The timeout is there just to safeguard in case a legitimate non-broken
timeline initial logical size calculation goes long. The timeout is
configurable, by default 10s, which I think would be fine for production
systems. In the test cases I've been looking at, it seems that these
steps are completed as fast as possible.
Co-authored-by: Christian Schwarz <christian@neon.tech>
This adds test coverage for 'compute_ctl', as it is now used by all
the python tests.
There are a few differences in how 'compute_ctl' is called in the
tests, compared to the real web console:
- In the tests, the postgresql.conf file is included as one large
string in the spec file, and it is written out as it is to the data
directory. I added a new field for that to the spec file. The real
web console, however, sets all the necessary settings in the
'settings' field, and 'compute_ctl' creates the postgresql.conf from
those settings.
- In the tests, the information needed to connect to the storage, i.e.
tenant_id, timeline_id, connection strings to pageserver and
safekeepers, are now passed as new fields in the spec file. The real
web console includes them as the GUCs in the 'settings' field. (Both
of these are different from what the test control plane used to do:
It used to write the GUCs directly in the postgresql.conf file). The
plan is to change the control plane to use the new method, and
remove the old method, but for now, support both.
Some tests that were sensitive to the amount of WAL generated needed
small changes, to accommodate that compute_ctl runs the background
health monitor which makes a few small updates. Also some tests shut
down the pageserver, and now that the background health check can run
some queries while the pageserver is down, that can produce a few
extra errors in the logs, which needed to be allowlisted.
Other changes:
- remove obsolete comments about PostgresNode;
- create standby.signal file for Static compute node;
- log output of `compute_ctl` and `postgres` is merged into
`endpoints/compute.log`.
---------
Co-authored-by: Anastasia Lubennikova <anastasia@neon.tech>
We have 2 ways of tenant shutdown, we should have just one.
Changes are mostly mechanical simple refactorings.
Added `warn!` on the "shutdown all remaining tasks" should trigger test
failures in the between time of not having solved the "tenant/timeline
owns all spawned tasks" issue.
Cc: #4327.
added the `allowed_error` to the `positive_env` so any tests completing
the attach are allowed have this print out. they are allowed to do so,
because the `random_init_delay` can produce close to zero and thus the
first run will be near attach. Though... Unsure if we ever really need
the eviction task to run **before** it can evict something, as in after
20min or 24h.
in the failed test case however period is 20s so interesting that we
didn't run into this sooner.
evidence of flaky:
https://github.com/neondatabase/neon/actions/runs/5175677035/jobs/9323705929?pr=4399#step:4:38536
walreceiver logs are a bit hard to understand because of partial span
usage, extra messages, ignored errors popping up as huge stacktraces.
Fixes#3330 (by spans, also demote info -> debug).
- arrange walreceivers spans into a hiearchy:
- `wal_connection_manager{tenant_id, timeline_id}` ->
`connection{node_id}` -> `poller`
- unifies the error reporting inside `wal_receiver`:
- All ok errors are now `walreceiver connection handling ended: {e:#}`
- All unknown errors are still stacktraceful task_mgr reported errors
with context `walreceiver connection handling failure`
- Remove `connect` special casing, was: `DB connection stream finished`
for ok errors
- Remove `done replicating` special casing, was `Replication stream
finished` for ok errors
- lowered log levels for (non-exhaustive list):
- `WAL receiver manager started, connecting to broker` (at startup)
- `WAL receiver shutdown requested, shutting down` (at shutdown)
- `Connection manager loop ended, shutting down` (at shutdown)
- `sender is dropped while join handle is still alive` (at lucky
shutdown, see #2885)
- `timeline entered terminal state {:?}, stopping wal connection manager
loop` (at shutdown)
- `connected!` (at startup)
- `Walreceiver db connection closed` (at disconnects?, was without span)
- `Connection cancelled` (at shutdown, was without span)
- `observed timeline state change, new state is {new_state:?}` (never
after Timeline::activate was made infallible)
- changed:
- `Timeline dropped state updates sender, stopping wal connection
manager loop`
- was out of date; sender is not dropped but `Broken | Stopping` state
transition
- also made `debug!`
- `Timeline dropped state updates sender before becoming active,
stopping wal connection manager loop`
- was out of date: sender is again not dropped but `Broken | Stopping`
state transition
- also made `debug!`
- log fixes:
- stop double reporting panics via JoinError
We now spawn a new task for every HTTP request, and wait on the
JoinHandle. If Hyper drops the Future, the spawned task will keep
running. This protects the rest of the pageserver code from unexpected
async cancellations.
This creates a CancellationToken for each request and passes it to the
handler function. If the HTTP request is dropped by the client, the
CancellationToken is signaled. None of the handler functions make use
for the CancellationToken currently, but they now they could.
The CancellationToken arguments also work like documentation. When
you're looking at a function signature and you see that it takes a
CancellationToken as argument, it's a nice hint that the function might
run for a long time, and won't be async cancelled. The default
assumption in the pageserver is now that async functions are not
cancellation-safe anyway, unless explictly marked as such, but this is a
nice extra reminder.
Spawning a task for each request is OK from a performance point of view
because spawning is very cheap in Tokio, and none of our HTTP requests
are very performance critical anyway.
Fixes issue #3478
## Problem
This PR includes doc changes to the current metrics as well as adding
new metrics. With the new set of metrics, we can quantitatively analyze
the read amp., write amp. and space amp. in the system, when used
together with https://github.com/neondatabase/neonbench
close https://github.com/neondatabase/neon/issues/4312
ref https://github.com/neondatabase/neon/issues/4347
compaction metrics TBD, a novel idea is to print L0 file number and
number of layers in the system, and we can do this in the future when we
start working on compaction.
## Summary of changes
* Add `READ_NUM_FS_LAYERS` for computing read amp.
* Add `MATERIALIZED_PAGE_CACHE_HIT_UPON_REQUEST`.
* Add `GET_RECONSTRUCT_DATA_TIME`. GET_RECONSTRUCT_DATA_TIME +
RECONSTRUCT_TIME + WAIT_LSN_TIME should be approximately total time of
reads.
* Add `5.0` and `10.0` to `STORAGE_IO_TIME_BUCKETS` given some fsync
runs slow (i.e., > 1s) in some cases.
* Some `WAL_REDO` metrics are only used when Postgres is involved in the
redo process.
---------
Signed-off-by: Alex Chi <iskyzh@gmail.com>
This parameter can be use to restrict number of image layers generated
because of GC request (wanted image layers).
Been set to zero it completely eliminates creation of such image layers.
So it allows to avoid extra storage consumption after merging #3673
## Problem
PR #3673 forces generation of missed image layers. So i short term is
cause cause increase (in worst case up to two times) size of storage.
It was intended (by me) that GC period is comparable with PiTR interval.
But looks like it is not the case now - GC is performed much more
frequently. It may cause the problem with space exhaustion: GC forces
new image creation while large PiTR still prevent GC from collecting old
layers.
## Summary of changes
Add new pageserver parameter` forced_image_creation_limit` which
restrict number of created image layers which are requested by GC.
## Checklist before requesting a review
- [ ] I have performed a self-review of my code.
- [ ] If it is a core feature, I have added thorough tests.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [ ] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
## Checklist before merging
- [ ] Do not forget to reformat commit message to not include the above
checklist
Startup continues to be slow, work towards to alleviate it.
Summary of changes:
- pretty the functional improvements from #4366 into
`utils::completion::{Completion, Barrier}`
- extend "initial load completion" usage up to tenant background tasks
- previously only global background tasks
- spawn_blocking the tenant load directory traversal
- demote some logging
- remove some unwraps
- propagate some spans to `spawn_blocking`
Runtime effects should be major speedup to loading, but after that, the
`BACKGROUND_RUNTIME` will be blocked for a long time (minutes). Possible
follow-ups:
- complete initial tenant sizes before allowing background tasks to
block the `BACKGROUND_RUNTIME`
This is preliminary work for/from #4220 (async
`Layer::get_value_reconstruct_data`).
The motivation is to avoid locking `Tenant::timelines` in places that
can't be `async`, because in #4333 we want to convert Tenant::timelines
from `std::sync::Mutex` to `tokio::sync::Mutex`.
But, the changes here are useful in general because they clean up &
document tenant state transitions.
That also paves the way for #4350, which is an alternative to #4333 that
refactors the pageserver code so that we can keep the
`Tenant::timelines` mutex sync.
This patch consists of the following core insights and changes:
* spawn_load and spawn_attach own the tenant state until they're done
* once load()/attach() calls are done ...
* if they failed, transition them to Broken directly (we know that
there's no background activity because we didn't call activate yet)
* if they succeed, call activate. We can make it infallible. How? Later.
* set_broken() and set_stopping() are changed to wait for spawn_load() /
spawn_attach() to finish.
* This sounds scary because it might hinder detach or shutdown, but
actually, concurrent attach+detach, or attach+shutdown, or
load+shutdown, or attach+shutdown were just racy before this PR.
So, with this change, they're not anymore.
In the future, we can add a `CancellationToken` stored in Tenant to
cancel `load` and `attach` faster, i.e., make `spawn_load` /
`spawn_attach` transition them to Broken state sooner.
See the doc comments on TenantState for the state transitions that are
now possible.
It might seem scary, but actually, this patch reduces the possible state
transitions.
We introduce a new state `TenantState::Activating` to avoid grabbing the
`Tenant::timelines` lock inside the `send_modify` closure.
These were the humble beginnings of this PR (see Motivation section),
and I think it's still the right thing to have this `Activating` state,
even if we decide against async `Tenant::timelines` mutex. The reason is
that `send_modify` locks internally, and by moving locking of
Tenant::timelines out of the closure, the internal locking of
`send_modify` becomes a leaf of the lock graph, and so, we eliminate
deadlock risk.
Co-authored-by: Joonas Koivunen <joonas@neon.tech>
If the timeline is already being deleted, return an error. We used to
notice the duplicate request and error out in
persist_index_part_with_deleted_flag(), but it's better to detect it
earlier. Add an explicit lock for the deletion.
Note: This doesn't do anything about the async cancellation problem
(github issue #3478): if the original HTTP request dropped, because the
client disconnected, the timeline deletion stops half-way through the
operation. That needs to be fixed, too, but that's a separate story.
(This is a simpler replacement for PR #4194. I'm also working on the
cancellation shielding, see PR #4314.)
We used to generate the ID, if the caller didn't specify it. That's bad
practice, however, because network is never fully reliable, so it's
possible we create a new tenant but the caller doesn't know about it,
and because it doesn't know the tenant ID, it has no way of retrying or
checking if it succeeded. To discourage that, make it mandatory. The web
control plane has not relied on the auto-generation for a long time.
## Problem
Test `test_metric_collection` become flaky:
```
AssertionError: assert not ['2023-05-25T14:03:41.644042Z ERROR metrics_collection: failed to send metrics: reqwest::Error { kind: Request, url: Url { scheme: "http", cannot_be_a_base: false, username: "", password: None, host: Some(Domain("localhost")), port: Some(18022), path: "/billing/api/v1/usage_events", query: None, fragment: None }, source: hyper::Error(Connect, ConnectError("tcp connect error", Os { code: 99, kind: AddrNotAvailable, message: "Cannot assign requested address" })) }',
...]
```
I suspect it is caused by having 2 places when we define
`httpserver_listen_address` fixture (which is internally used by
`pytest-httpserver` plugin)
## Summary of changes
- Remove the definition of `httpserver_listen_address` from
`test_runner/regress/test_ddl_forwarding.py` and keep one in
`test_runner/fixtures/neon_fixtures.py`
- Also remote unused `httpserver_listen_address` parameter from
`test_proxy_metric_collection`
## Describe your changes
## Issue ticket number and link
## Checklist before requesting a review
- [x] I have performed a self-review of my code.
- [x] If it is a core feature, I have added thorough tests.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [ ] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
(Instead of going through mgr every iteration.)
The `wait_for_active_tenant` function's `wait` argument could be removed
because it was only used for the loop that waits for the tenant to show
up in the tenants map. Since we're passing the tenant in, we now longer
need to get it from the tenants map.
NB that there's no guarantee that the tenant object is in the tenants
map at the time the background loop function starts running. But the
tenant mgr guarantees that it will be quite soon. See
`tenant_map_insert` way upwards in the call hierarchy for details.
This is prep work to eliminate `subscribe_for_state_updates` (PR #4299 )
Fixes: #3501
## Problem
`pytest` 6 truncates error messages and this is not configured.
It's fixed in `pytest` 7, it prints the whole message (truncating limit
is higher) if `--verbose` is set (it's set on CI).
## Summary of changes
- `pytest` and `pytest` plugins are updated to their latest versions
- linters (`black` and `ruff`) are updated to their latest versions
- `mypy` and types are updated to their latest versions, new warnings
are fixed
- while we're here, allure updated its latest version as well
## Describe your changes
Right now the only criteria for image layer generation is number of
delta layer since last image layer.
If we have "stairs" layout of delta layers (see link below) then it can
happen that there a lot of old delta layers which can not be reclaimed
by GC because are not fully covered with image layers.
This PR constructs list of "wanted" image layers in GC (which image
layers are needed to be able to remove old layers)
and pass this list to compaction task which performs generation of image
layers.
So right now except deltas count criteria we also take in account
"wishes" of GC.
## Issue ticket number and link
See
https://neondb.slack.com/archives/C033RQ5SPDH/p1676914249982519
## Checklist before requesting a review
- [ ] I have performed a self-review of my code.
- [ ] If it is a core feature, I have added thorough tests.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [ ] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
---------
Co-authored-by: Joonas Koivunen <joonas@neon.tech>
Co-authored-by: Heikki Linnakangas <heikki@neon.tech>
This commit introduces an SQL-over-HTTP endpoint in the proxy, with a JSON
response structure resembling that of the node-postgres driver. This method,
using HTTP POST, achieves smaller amortized latencies in edge setups due to
fewer round trips and an enhanced open connection reuse by the v8 engine.
This update involves several intricacies:
1. SQL injection protection: We employed the extended query protocol, modifying
the rust-postgres driver to send queries in one roundtrip using a text
protocol rather than binary, bypassing potential issues like those identified
in https://github.com/sfackler/rust-postgres/issues/1030.
2. Postgres type compatibility: As not all postgres types have binary
representations (e.g., acl's in pg_class), we adjusted rust-postgres to
respond with text protocol, simplifying serialization and fixing queries with
text-only types in response.
3. Data type conversion: Considering JSON supports fewer data types than
Postgres, we perform conversions where possible, passing all other types as
strings. Key conversions include:
- postgres int2, int4, float4, float8 -> json number (NaN and Inf remain
text)
- postgres bool, null, text -> json bool, null, string
- postgres array -> json array
- postgres json and jsonb -> json object
4. Alignment with node-postgres: To facilitate integration with js libraries,
we've matched the response structure of node-postgres, returning command tags
and column oids. Command tag capturing was added to the rust-postgres
functionality as part of this change.
This patch fixes parsing of the `max_lsn_wal_lag` tenant config item.
We were incorrectly expecting a string before, but the type is a
NonZeroU64.
So, when setting it in the config, the (updated) test case would fail
with
```
E psycopg2.errors.InternalError_: Tenant a1fa9cc383e32ddafb73ff920de5f2e6 will not become active. Current state: Broken due to: Failed to parse config from file '.../repo/tenants/a1fa9cc383e32ddafb73ff920de5f2e6/config' as pageserver config: configure option max_lsn_wal_lag is not a string. Backtrace:
```
So, not even the assertions added are necessary.
The test coverage for tenant config is rather thin in general.
For example, the `test_tenant_conf.py` test doesn't cover all the
options.
I'll add a new regression test as part of attach-time-tenant-conf PR
https://github.com/neondatabase/neon/pull/4255
This PR enforces that the tenant create / update-config APIs reject
requests with unknown fields.
This is a desirable property because some tenant config settings control
the lifetime of user data (e.g., GC horizon or PITR interval).
Suppose we inadvertently rename the `pitr_interval` field in the Rust
code.
Then, right now, a client that still uses the old name will send a
tenant config request to configure a new PITR interval.
Before this PR, we would accept such a request, ignore the old name
field, and use the pageserver.toml default value for what the new PITR
interval is.
With this PR, we will instead reject such a request.
One might argue that the client could simply check whether the config it
sent has been applied, using the `/v1/tenant/.../config` endpoint.
That is correct for tenant create and update-config.
But, attach will soon [^1] grow the ability to have attach-time config
as well.
If we ignore unknown fields and fall back to global defaults in that
case, we risk data loss.
Example:
1. Default PITR in pageservers is 7 days.
2. Create a tenant and set its PITR to 30 days.
3. For 30 days, fill the tenant continuously with data.
4. Detach the tenant.
5. Attach tenant.
Attach must use the 30-day PITR setting in this scenario.
If it were to fall back to the 7-day default value, we would lose 23
days of PITR capability for the tenant.
So, the PR that adds attach-time tenant config will build on the
(clunky) infrastructure added in this PR
[^1]: https://github.com/neondatabase/neon/pull/4255
Implementation Notes
====================
This could have been a simple `#[serde(deny_unknown_fields)]` but sadly,
that is documented- but silent-at-compile-time-incompatible with
`#[serde(flatten)]`. But we are still using this by adding on outer struct and use unit tests to ensure it is correct.
`neon_local tenant config` now uses the `.remove()` pattern + bail if
there are leftover config args. That's in line with what
`neon_local tenant create` does. We should dedupe that logic in a future
PR.
---------
Signed-off-by: Alex Chi <iskyzh@gmail.com>
Co-authored-by: Alex Chi <iskyzh@gmail.com>
Disable background tasks to not get compaction downloading all layers
but also stop safekeepers before checkpointing, use a readonly endpoint.
Fixes: #3666
Co-authored-by: Christian Schwarz <christian@neon.tech>
With this patch, the attach handler now follows the same pattern as
tenant create with regards to instantiation of the new tenant:
1. Prepare on-disk state using `create_tenant_files`.
2. Use the same code path as pageserver startup to load it into memory
and start background loops (`schedule_local_tenant_processing`).
It's a bit sad we can't use the
`PageServerConfig::tenant_attaching_mark_file_path` method inside
`create_tenant_files` because it operates in a temporary directory.
However, it's a small price to pay for the gained simplicity.
During implementation, I noticed that we don't handle failures post
`create_tenant_files` well. I left TODO comments in the code linking to
the issue that I created for this [^1].
Also, I'll dedupe the spawn_load and spawn_attach code in a future
commit.
refs https://github.com/neondatabase/neon/issues/1555
part of https://github.com/neondatabase/neon/issues/886 (Tenant
Relocation)
[^1]: https://github.com/neondatabase/neon/issues/4233
This PR is simply the patch from
https://github.com/neondatabase/neon/issues/4008 except we enabled
`force_path_style` for custom endpoints. This is because at some
version, the s3 sdk by default uses the virtual-host style access, which
is not supported by MinIO in the default configuration. By enforcing
path style access for custom endpoints, we can pass all e2e test cases.
SDK 0.55 is not the latest version and we can bump it further later when
all flaky tests in this PR are resolved.
This PR also (hopefully) fixes flaky test
`test_ondemand_download_timetravel`.
close https://github.com/neondatabase/neon/issues/4008
Signed-off-by: Alex Chi <iskyzh@gmail.com>
Await for upload to complete before returning 201 Created on
`branch_timeline` or when `bootstrap_timeline` happens. Should either of
those waits fail, then on the retried request await for uploads again.
This should work as expected assuming control-plane does not start to
use timeline creation as a wait_for_upload mechanism.
Fixes#3865, started from
https://github.com/neondatabase/neon/pull/3857/files#r1144468177
Co-authored-by: Heikki Linnakangas <heikki@neon.tech>
After tenant attach, there is a window where the child timeline is
loaded and accepts GetPage requests, but its parent is not. If a
GetPage request needs to traverse to the parent, it needs to wait for
the parent timeline to become active, or it might miss some records on
the parent timeline.
It's also possible that the parent timeline is active, but it hasn't
yet received all the WAL up to the branch point from the safekeeper.
This happens if a pageserver crashes soon after creating a timeline,
so that the WAL leading to the branch point has not yet been uploaded
to remote storage. After restart, the WAL will be re-streamed and
ingested from the safekeeper, but that takes a while. Because of that,
it's not enough to check that the parent timeline is active, we also
need to wait for the WAL to arrive on the parent timeline, just like
at the beginning of GetPage handling. We probably should change the
behavior at create_timeline so that a timeline can only be created
after all the WAL up to the branch point has been uploaded to remote
storage, but that's not currently the case and out of scope for this
PR (see github issue #4218).
@NanoBjorn encountered this while working on tenant migration. After
migrating a tenant with a parent and child branch, connecting to the
child branch failed with an error like:
```
FATAL: "base/16385" is not a valid data directory
DETAIL: File "base/16385/PG_VERSION" is missing.
```
This commit adds two tests that reproduce the bug, with slightly
different symptoms.
This PR adds tests runs on Postgres 15 and created unified Allure report
with results for all tests.
- Split `.github/actions/allure-report` into
`.github/actions/allure-report-store` and
`.github/actions/allure-report-generate`
- Add debug or release pytest parameter for all tests (depending on
`BUILD_TYPE` env variable)
- Add Postgres version as a pytest parameter for all tests (depending on
`DEFAULT_PG_VERSION` env variable)
- Fix `test_wal_restore` and `restore_from_wal.sh` to support path with
`[`/`]` in it (fixed by applying spellcheck to the script and fixing all
warnings), `restore_from_wal_archive.sh` is deleted as unused.
- All known failures on Postgres 15 marked with xfail
