Make it remember when timeline starts in general and on this safekeeper in
particular (the point might be later on new safekeeper replacing failed one).
Bumps control file and walproposer protocol versions.
While protocol is bumped, also add safekeeper node id to
AcceptorProposerGreeting.
ref #1561
A new `get_lsn_by_timestamp` command is added to the libpq page service
API.
An extra timestamp field is now stored in an extra field after each
Clog page. It is the timestamp of the latest commit, among all the
transactions on the Clog page. To find the overall latest commit, we
need to scan all Clog pages, but this isn't a very frequent operation
so that's not too bad.
To find the LSN that corresponds to a timestamp, we perform a binary
search. The binary search starts with min = last LSN when GC ran, and
max = latest LSN on the timeline. On each iteration of the search we
check if there are any commits with a higher-than-requested timestamp
at that LSN.
Implements github issue 1361.
* Traverse frozen layer in get_reconstruct_data in reverse order
* Fix comments on frozen layers.
Note explicitly the order that the layers are in the queue.
* Add fail point to reproduce failpoint iteration error
Co-authored-by: Heikki Linnakangas <heikki@neon.tech>
Now proxy binary accepts `--auth-backend` CLI option, which determines
auth scheme and cluster routing method. Following backends are currently
implemented:
* legacy
old method, when username ends with `@zenith` it uses md5 auth dbname as
the cluster name; otherwise, it sends a login link and waits for the console
to call back
* console
new SCRAM-based console API; uses SNI info to select the destination
cluster
* postgres
uses postgres to select auth secrets of existing roles. Useful for local
testing
* link
sends login link for all usernames
wal_keep_size is already set to 0 in our cloud setup, but we don't use this value in tests. This commit fixes wal_keep_size in control_plane and adds tests for WAL recycling and lagging safekeepers.
Remove when it is consumed by all of 1) pageserver (remote_consistent_lsn) 2)
safekeeper peers 3) s3 WAL offloading.
In test s3 offloading for now is mocked by directly bumping s3_wal_lsn.
ref #1403
Add tenant config API and 'zenith tenant config' CLI command.
Add 'show' query to pageserver protocol for tenantspecific config parameters
Refactoring: move tenant_config code to a separate module.
Save tenant conf file to tenant's directory, when tenant is created to recover it on pageserver restart.
Ignore error during tenant config loading, while it is not supported by console
Define PiTR interval for GC.
refer #1320
This depends on a hacked version of the 'pprof-rs' crate. Because of
that, it's under an optional 'profiling' feature. It is disabled by
default, but enabled for release builds in CircleCI config. It doesn't
currently work on macOS.
The flamegraph is written to 'flamegraph.svg' in the pageserver
workdir when the 'pageserver' process exits.
Add a performance test that runs the perf_pgbench test, with profiling
enabled.
- Remove batch_others/test_pgbench.py. It was a quick check that pgbench
works, without actually recording any performance numbers, but that
doesn't seem very interesting anymore. Remove it to avoid confusing it
with the actual pgbench benchmarks
- Run pgbench with "-n" and "-S" options, for two different workloads:
simple-updates, and SELECT-only. Previously, we would only run it with
the "default" TPCB-like workload. That's more or less the same as the
simple-update (-n) workload, but I think the simple-upload workload
is more relevant for testing storage performance. The SELECT-only
workload is a new thing to measure.
- Merge test_perf_pgbench.py and test_perf_pgbench_remote.py. I added
a new "remote" implementation of the PgCompare class, which allows
running the same tests against an already-running Postgres instance.
- Make the PgBenchRunResult.parse_from_output function more
flexible. pgbench can print different lines depending on the
command-line options, but the parsing function expected a particular
set of lines.
The PgProtocol.connect() function took extra options for username,
database, etc. Remove those options, and have a generic way for each
subclass of PgProtocol to provide some default options, with the
capability override them in the connect() call.
It was the only test that used the 'schema' argument to the connect()
function. I'm about to refactor the option handling and will remove
the special 'schema' argument altogether, so rewrite the test to not
use it.
* Add test for restore from WAL
* Fix python formatting
* Choose unused port in wal restore test
* Move recovery tests to zenith_utils/scripts
* Set LD_LIBRARY_PATH in wal recovery scripts
* Fix python test formatting
* Fix mypy warning
* Bump postgres version
* Bump postgres version
* Add a test case for reading historic page versions
Test read_page_at_lsn returns correct results when compared to page inspect.
Validate possiblity of reading pages from dropped relation.
Ensure funcitons read latest version when null lsn supplied.
Check that functions do not poison buffer cache with stale page versions.
Safekeers now publish to and pull from etcd per-timeline data. Immediate goal is
WAL truncation, for which every safekeeper must know remote_consistent_lsn; the
next would be callmemaybe replacement.
Adds corresponding '--broker' argument to safekeeper and ability to run etcd in
tests.
Adds test checking remote_consistent_lsn is indeed communicated.
This is a backwards-incompatible change. The new pageserver cannot
read repositories created with an old pageserver binary, or vice
versa.
Simplify Repository to a value-store
------------------------------------
Move the responsibility of tracking relation metadata, like which
relations exist and what are their sizes, from Repository to a new
module, pgdatadir_mapping.rs. The interface to Repository is now a
simple key-value PUT/GET operations.
It's still not any old key-value store though. A Repository is still
responsible from handling branching, and every GET operation comes
with an LSN.
Mapping from Postgres data directory to keys/values
---------------------------------------------------
All the data is now stored in the key-value store. The
'pgdatadir_mapping.rs' module handles mapping from PostgreSQL objects
like relation pages and SLRUs, to key-value pairs.
The key to the Repository key-value store is a Key struct, which
consists of a few integer fields. It's wide enough to store a full
RelFileNode, fork and block number, and to distinguish those from
metadata keys.
'pgdatadir_mapping.rs' is also responsible for maintaining a
"partitioning" of the keyspace. Partitioning means splitting the
keyspace so that each partition holds a roughly equal number of keys.
The partitioning is used when new image layer files are created, so
that each image layer file is roughly the same size.
The partitioning is also responsible for reclaiming space used by
deleted keys. The Repository implementation doesn't have any explicit
support for deleting keys. Instead, the deleted keys are simply
omitted from the partitioning, and when a new image layer is created,
the omitted keys are not copied over to the new image layer. We might
want to implement tombstone keys in the future, to reclaim space
faster, but this will work for now.
Changes to low-level layer file code
------------------------------------
The concept of a "segment" is gone. Each layer file can now store an
arbitrary range of Keys.
Checkpointing, compaction
-------------------------
The background tasks are somewhat different now. Whenever
checkpoint_distance is reached, the WAL receiver thread "freezes" the
current in-memory layer, and creates a new one. This is a quick
operation and doesn't perform any I/O yet. It then launches a
background "layer flushing thread" to write the frozen layer to disk,
as a new L0 delta layer. This mechanism takes care of durability. It
replaces the checkpointing thread.
Compaction is a new background operation that takes a bunch of L0
delta layers, and reshuffles the data in them. It runs in a separate
compaction thread.
Deployment
----------
This also contains changes to the ansible scripts that enable having
multiple different pageservers running at the same time in the staging
environment. We will use that to keep an old version of the pageserver
running, for clusters created with the old version, at the same time
with a new pageserver with the new binary.
Author: Heikki Linnakangas
Author: Konstantin Knizhnik <knizhnik@zenith.tech>
Author: Andrey Taranik <andrey@zenith.tech>
Reviewed-by: Matthias Van De Meent <matthias@zenith.tech>
Reviewed-by: Bojan Serafimov <bojan@zenith.tech>
Reviewed-by: Konstantin Knizhnik <knizhnik@zenith.tech>
Reviewed-by: Anton Shyrabokau <antons@zenith.tech>
Reviewed-by: Dhammika Pathirana <dham@zenith.tech>
Reviewed-by: Kirill Bulatov <kirill@zenith.tech>
Reviewed-by: Anastasia Lubennikova <anastasia@zenith.tech>
Reviewed-by: Alexey Kondratov <alexey@zenith.tech>
More rows, and test with serial and parallel plans. But fewer iterations,
so that the tests run in < 1 minutes, and we don't need to mark them as
"slow".
