## Problem
In https://github.com/neondatabase/neon/pull/7531, we would like to be
able to rewrite layers safely. One option is to make `Layer` able to
rewrite files in place safely (e.g. by blocking evictions/deletions for
an old Layer while a new one is created), but that's relatively fragile.
It's more robust in general if we simply never overwrite the same local
file: we can do that by putting the generation number in the filename.
## Summary of changes
- Add `local_layer_path` (counterpart to `remote_layer_path`) and
convert all locations that manually constructed a local layer path by
joining LayerFileName to timeline path
- In the layer upload path, construct remote paths with
`remote_layer_path` rather than trying to build them out of a local
path.
- During startup, carry the full path to layer files through
`init::reconcile`, and pass it into `Layer::for_resident`
- Add a test to make sure we handle upgrades properly.
- Comment out the generation part of `local_layer_path`, since we need
to maintain forward compatibility for one release. A tiny followup PR
will enable it afterwards.
We could make this a bit simpler if we bulk renamed existing layers on
startup instead of carrying literal paths through init, but that is
operationally risky on existing servers with millions of layer files. We
can always do a renaming change in future if it becomes annoying, but
for the moment it's kind of nice to have a structure that enables us to
change local path names again in future quite easily.
We should rename `LayerFileName` to `LayerName` or somesuch, to make it
more obvious that it's not a literal filename: this was already a bit
confusing where that type is used in remote paths. That will be a
followup, to avoid polluting this PR's diff.
## Problem
Some tenants were observed to stop doing downloads after some time
## Summary of changes
- Fix a rogue `<` that was incorrectly scheduling work when `now` was
_before_ the scheduling target, rather than after. This usually resulted
in too-frequent execution, but could also result in never executing, if
the current time has advanced ahead of `next_download` at the time we
call `schedule()`.
- Fix in-memory list of timelines not being amended after timeline
deletion: the resulted in repeated harmless logs about the timeline
being removed, and redundant calls to remove_dir_all for the timeline
path.
- Add a log at startup to make it easier to see a particular tenant
starting in secondary mode (this is for parity with the logging that
exists when spawning an attached tenant). Previously searching on tenant
ID didn't provide a clear signal as to how the tenant was started during
pageserver start.
- Add a test that exercises secondary downloads using the background
scheduling, whereas existing tests were using the API hook to invoke
download directly.
The latest failures of test_secondary_downloads are spooky: layers are
missing on disk according to the test, but present according to the
pageserver logs:
- Make the pageserver assert that layers are really present on disk and
log the full path (debug mode only)
- Make the test dump a full listing on failure of the assert that failed
the last two times
Related: #6966
## Problem
This is a refactor.
This PR was a precursor to a much smaller change
e5bd602dc1,
where as I was writing it I found that we were not far from getting rid
of the last non-deprecated code paths that use `mgr::` scoped functions
to get at the TenantManager state.
We're almost done cleaning this up as per
https://github.com/neondatabase/neon/issues/5796. The only significant
remaining mgr:: item is `get_active_tenant_with_timeout`, which is
page_service's path for fetching tenants.
## Summary of changes
- Remove the bool argument to get_attached_tenant_shard: this was almost
always false from API use cases, and in cases when it was true, it was
readily replacable with an explicit check of the returned tenant's
status.
- Rather than letting the timeline eviction task query any tenant it
likes via `mgr::`, pass an `Arc<Tenant>` into the task. This is still an
ugly circular reference, but should eventually go away: either when we
switch to exclusively using disk usage eviction, or when we change
metadata storage to avoid the need to imitate layer accesses.
- Convert all the mgr::get_tenant call sites to use
TenantManager::get_attached_tenant_shard
- Move list_tenants into TenantManager.
## Problem
- https://github.com/neondatabase/neon/issues/6966
This test occasionally failed with some layers unexpectedly not present
on the secondary pageserver. The issue in that failure is the attached
pageserver uploading heatmaps that refer to not-yet-uploaded layers.
## Summary of changes
After uploading heatmap, drain upload queue on attached pageserver, to
guarantee that all the layers referenced in the haetmap are uploaded.
- Enable debug logs for this test
- Add some debug logging detail in downloader.rs
- Add an info-level message in scheduler.rs that makes it obvious if a
command is waiting for an existing task rather than spawning a new one.
This is a mixed bag of changes split out for separate review while
working on other things, and batched together to reduce load on CI
runners. Each commits stands alone for review purposes:
- do_tenant_shard_split was a long function and had a synchronous
validation phase at the start that could readily be pulled out into a
separate function. This also avoids the special casing of
ApiError::BadRequest when deciding whether an abort is needed on errors
- Add a 'describe' API (GET on tenant ID) that will enable storcon-cli
to see what's going on with a tenant
- the 'locate' API wasn't really meant for use in the field. It's for
tests: demote it to the /debug/ prefix
- The `Single` placement policy was a redundant duplicate of Double(0),
and Double was a bad name. Rename it Attached.
(https://github.com/neondatabase/neon/issues/7107)
- Some neon_local commands were added for debug/demos, which are now
replaced by commands in storcon-cli (#7114 ). Even though that's not
merged yet, we don't need the neon_local ones any more.
Closes https://github.com/neondatabase/neon/issues/7107
## Backward compat of Single/Double -> `Attached(n)` change
A database migration is used to convert any existing values.
## Problem
The existing secondary download API relied on the caller to wait as long
as it took to complete -- for large shards that could be a long time, so
typical clients that might have a baked-in ~30s timeout would have a
problem.
## Summary of changes
- Take a `wait_ms` query parameter to instruct the pageserver how long
to wait: if the download isn't complete in this duration, then 201 is
returned instead of 200.
- For both 200 and 201 responses, include response body describing
download progress, in terms of layers and bytes. This is sufficient for
the caller to track how much data is being transferred and log/present
that status.
- In storage controller live migrations, use this API to apply a much
longer outer timeout, with smaller individual per-request timeouts, and
log the progress of the downloads.
- Add a test that injects layer download delays to exercise the new
behavior
Not a user-facing change, but can break any existing `.neon` directories
created by neon_local, as the name of the database used by the storage
controller changes.
This PR changes all the locations apart from the path of
`control_plane/attachment_service` (waiting for an opportune moment to
do that one, because it's the most conflict-ish wrt ongoing PRs like
#6676 )
## Problem
- #6966
- Existing logs aren't pointing to a cause: it looks like heatmap upload
and download are happening, but for some reason the evicted layer isn't
removed on the secondary location.
## Summary of changes
- Assert evicted layer is gone from heatmap before checking its gone
from local disk: this will give clarity on whether the issue is with the
uploads or downloads.
- On assertion failures, log the contents of heatmap.
## Problem
Secondary mode locations keep a local copy of the heatmap, which needs
cleaning up during deletion.
Closes: https://github.com/neondatabase/neon/issues/6802
## Summary of changes
- Extend test_live_migration to reproduce the issue
- Remove heatmap-v1.json during tenant deletion
In #6079 it was found that there is no test that executes the scrubber.
We now add such a test, which does the following things:
* create a tenant, write some data
* run the scrubber
* remove the tenant
* run the scrubber again
Each time, the scrubber runs the scan-metadata command. Before #6079 we
would have errored, now we don't.
Fixes#6080
## Problem
For #6423, creating a reproducer turned out to be very easy, as an
extension to test_ondemand_activation.
However, before I had diagnosed the issue, I was starting with a more
brute force approach of running creation API calls in the background
while restarting a pageserver, and that shows up a bunch of other
interesting issues.
In this PR:
- Add the reproducer for #6423 by extending `test_ondemand_activation`
(confirmed that this test fails if I revert the fix from
https://github.com/neondatabase/neon/pull/6430)
- In timeline creation, return 503 responses when we get an error and
the tenant's cancellation token is set: this covers the cases where we
get an anyhow::Error from something during timeline creation as a result
of shutdown.
- While waiting for tenants to become active during creation, don't
.map_err() the result to a 500: instead let the `From` impl map the
result to something appropriate (this includes mapping shutdown to 503)
- During tenant creation, we were calling `Tenant::load_local` because
no Preload object is provided. This is usually harmless because the
tenant dir is empty, but if there are some half-created timelines in
there, bad things can happen. Propagate the SpawnMode into
Tenant::attach, so that it can properly skip _any_ attempt to load
timelines if creating.
- When we call upsert_location, there's a SpawnMode that tells us
whether to load from remote storage or not. But if the operation is a
retry and we already have the tenant, it is not correct to skip loading
from remote storage: there might be a timeline there. This isn't
strictly a correctness issue as long as the caller behaves correctly
(does not assume that any timelines are persistent until the creation is
acked), but it's a more defensive position.
- If we shut down while the task in Tenant::attach is running, it can
end up spawning rogue tasks. Fix this by holding a GateGuard through
here, and in upsert_location shutting down a tenant after calling
tenant_spawn if we can't insert it into tenants_map. This fixes the
expected behavior that after shutdown_all_tenants returns, no tenant
tasks are running.
- Add `test_create_churn_during_restart`, which runs tenant & timeline
creations across pageserver restarts.
- Update a couple of tests that covered cancellation, to reflect the
cleaner errors we now return.
In the most straightforward way; safekeeper performs it in DELETE endpoint
implementation, with no coordination between sks.
delete_force endpoint in the code is renamed to delete as there is only one way
to delete.
This is a precursor to:
- https://github.com/neondatabase/neon/pull/6185
While that PR contains big changes to neon_local and attachment_service,
this PR contains a few unrelated standalone changes generated while
working on that branch:
- Fix restarting a pageserver when it contains multiple shards for the
same tenant
- When using location_config api to attach a tenant, create its
timelines dir
- Update test paths where generations were previously optional to make
them always-on: this avoids tests having to spuriously assert that
attachment_service is not None in order to make the linter happy.
- Add a TenantShardId python implementation for subsequent use in test
helpers that will be made shard-aware
- Teach scrubber to read across shards when checking for layer
existence: this is a refactor to track the list of existent layers at
tenant-level rather than locally to each timeline. This is a precursor
to testing shard splitting.
Dependency (commits inline):
https://github.com/neondatabase/neon/pull/5842
## Problem
Secondary mode tenants need a manifest of what to download. Ultimately
this will be some kind of heat-scored set of layers, but as a robust
first step we will simply use the set of resident layers: secondary
tenant locations will aim to match the on-disk content of the attached
location.
## Summary of changes
- Add heatmap types representing the remote structure
- Add hooks to Tenant/Timeline for generating these heatmaps
- Create a new `HeatmapUploader` type that is external to `Tenant`, and
responsible for walking the list of attached tenants and scheduling
heatmap uploads.
Notes to reviewers:
- Putting the logic for uploads (and later, secondary mode downloads)
outside of `Tenant` is an opinionated choice, motivated by:
- Enable future smarter scheduling of operations, e.g. uploading the
stalest tenant first, rather than having all tenants compete for a fair
semaphore on a first-come-first-served basis. Similarly for downloads,
we may wish to schedule the tenants with the hottest un-downloaded
layers first.
- Enable accessing upload-related state without synchronization (it
belongs to HeatmapUploader, rather than being some Mutex<>'d part of
Tenant)
- Avoid further expanding the scope of Tenant/Timeline types, which are
already among the largest in the codebase
- You might reasonably wonder how much of the uploader code could be a
generic job manager thing. Probably some of it: but let's defer pulling
that out until we have at least two users (perhaps secondary downloads
will be the second one) to highlight which bits are really generic.
Compromises:
- Later, instead of using digests of heatmaps to decide whether anything
changed, I would prefer to avoid walking the layers in tenants that
don't have changes: tracking that will be a bit invasive, as it needs
input from both remote_timeline_client and Layer.
These tests have been loitering on a branch of mine for a while: they
already provide value even without all the secondary mode bits landed
yet, and the Workload helper is handy for other tests too.
- `Workload` is a re-usable test workload that replaces some of the
arbitrary "write a few rows" SQL that I've found my self repeating, and
adds a systematic way to append data and check that reads properly
reflect the changes. This append+validate stuff is important when doing
migrations, as we want to detect situations where we might be reading
from a pageserver that has not properly seen latest changes.
- test_multi_attach is a validation of how the pageserver handles
attaching the same tenant to multiple pageservers, from a safety point
of view. This is intentionally separate from the larger testing of
migration, to provide an isolated environment for multi-attachment.
- test_location_conf_churn is a pseudo-random walk through the various
states that TenantSlot can be put into, with validation that attached
tenants remain externally readable when they should, and as a side
effect validating that the compute endpoint's online configuration
changes work as expected.
- test_live_migration is the reference implementation of how to drive a
pair of pageservers through a zero-downtime migration of a tenant.
---------
Co-authored-by: Arpad Müller <arpad-m@users.noreply.github.com>
