## Problem
new clippy warnings on nightly.
## Summary of changes
broken up each commit by warning type.
1. Remove some unnecessary refs.
2. In edition 2024, inference will default to `!` and not `()`.
3. Clippy complains about doc comment indentation
4. Fix `Trait + ?Sized` where `Trait: Sized`.
5. diesel_derives triggering `non_local_defintions`
Set core rmilit to ulimited in compute_ctl, so that all child processes
inherit it. We could also set rlimit in relevant startup script, but
that way we would depend on external setup and might inadvertently
disable it again (core dumping worked in pods, but not in VMs with
inittab-based startup).
## Problem
We currently use 'immediate' mode in the most commonly used shutdown
path, when the control plane calls a `compute_ctl` API to terminate
Postgres inside compute without waiting for the actual pod / VM
termination. Yet, 'immediate' shutdown doesn't create a shutdown
checkpoint and ROs have bad times figuring out the list of running xacts
during next start.
## Summary of changes
Use 'fast' mode, which creates a shutdown checkpoint that is important
for ROs to get a list of running xacts faster instead of going through
the CLOG. On the control plane side, we poll this `compute_ctl`
termination API for 10s, it should be enough as we don't really write
any data at checkpoint time. If it times out, we anyway switch to the
slow k8s-based termination.
See https://www.postgresql.org/docs/current/server-shutdown.html for the
list of modes and signals.
The default VM shutdown hook already uses `fast` mode, see [1]
[1]
c9fd8d7693/vm-image-spec.yaml (L30-L31)
Related to #6211
## Summary of changes
- Stop logging HealthCheck message passing at INFO level (moved to
DEBUG)
- Stop logging /status accesses at INFO (moved to DEBUG)
- Stop logging most occurances of
`missing config file "compute_ctl_temp_override.conf"`
- Log memory usage only when the data has changed significantly, or if
we've not recently logged the data, rather than always every 2 seconds.
Fix#7278
## Summary of changes
* Explicitly create the extension download directory and assign correct
permissoins.
* Fix the problem that the extension download failure will cause all
future downloads to fail.
Signed-off-by: Alex Chi Z <chi@neon.tech>
## Problem
It seems that even though we have a retry on basebackup, it still
sometimes fails to fetch it with the failpoint enabled, resulting in a
test error.
## Summary of changes
If we fail to get the basebackup, disable the failpoint and try again.
## Problem
Fix https://github.com/neondatabase/neon/issues/7003. Fix
https://github.com/neondatabase/neon/issues/6982. Currently, neon
extension is only upgraded when new compute spec gets applied, for
example, when creating a new role or creating a new database. This also
resolves `neon.lfc_stat` not found warnings in prod.
## Summary of changes
This pull request adds the logic to spawn a background thread to upgrade
the neon extension version if the compute is a primary. If for whatever
reason the upgrade fails, it reports an error to the console and does
not impact compute node state.
This change can be further applied to 3rd-party extension upgrades. We
can silently upgrade the version of 3rd party extensions in the
background in the future.
Questions:
* Does alter extension takes some kind of lock that will block user
requests?
* Does `ALTER EXTENSION` writes to the database if nothing needs to be
upgraded? (may impact storage size).
Otherwise it's safe to land this pull request.
Signed-off-by: Alex Chi Z <chi@neon.tech>
## Problem
Fix https://github.com/neondatabase/neon/issues/6498
## Summary of changes
Only re-authenticate with zenith_admin if authentication fails.
Otherwise, directly return the error message.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
Nightly has added a bunch of compiler and linter warnings. There is also
two dependencies that fail compilation on latest nightly due to using
the old `stdsimd` feature name. This PR fixes them.
this is to speed up suspends, see
https://github.com/neondatabase/cloud/issues/10284
## Problem
## Summary of changes
## Checklist before requesting a review
- [ ] I have performed a self-review of my code.
- [ ] If it is a core feature, I have added thorough tests.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [ ] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
## Checklist before merging
- [ ] Do not forget to reformat commit message to not include the above
checklist
if anon is in shared_preload_libraries.
Users cannot install it themselves, because superuser is required.
GRANT all priveleged needed to use it to db_owner
We use the neon fork of the extension, because small change to sql file
is needed to allow db_owner to use it.
This feature is behind a feature flag AnonExtension,
so it is not enabled by default.
create_neon_superuser runs the first queries in the database after cold
start. Traces suggest that those first queries can make up a significant
fraction of the cold start time. Make it more visible by adding an
explict tracing span to it; currently you just have to deduce it by
looking at the time spent in the parent 'apply_config' span subtracted
by all the other child spans.
## Problem
Currently we have no retry mechanism for fetching basebackup. If there's
an unstable connection, starting compute will just fail.
## Summary of changes
Adds an exponential backoff with 7 retries to get the basebackup.
- Start pgbouncer in VM from postgres user, to allow connection to
pgbouncer admin console.
- Remove unused compute_ctl options --pgbouncer-connstr
and --pgbouncer-ini-path.
- Fix and cleanup code of connection to pgbouncer, add retries
because pgbouncer may not be instantly ready when compute_ctl starts.
## Problem
Currently, activity monitor in `compute_ctl` has 500 ms polling
interval. It also looks on the list of current client backends looking
for an active one or one with the most recent state change. This means
we can miss short-living connections.
Yet, during testing this PR I realized that it's usually not a problem
with pooled connection, as pgbouncer maintains connections to Postgres
even though client connection are short-living. We can still miss direct
connections.
## Summary of changes
This commit introduces another way to detect user activity on the
compute. It polls a sum of `active_time` and sum of `sessions` from all
non-system databases in the `pg_stat_database` [1]. If user runs some
queries or just open a direct connection, it will rise; if user will
drop db, it can go down, but it's still a change and will be detected as
activity.
New statistic-based logic seems to be working fine. Yet, after having it
running for a couple of hours I've seen several odd cases with
connections via pgbouncer:
1. Sometimes, if you run just `psql pooler_connstr -c 'select 1;'`
`active_time` could be not updated immediately, and it may take a couple
of dozens of seconds. This doesn't seem critical, though.
2. Same query with pooler, `active_time` can be bumped a bit, then
pgbouncer keeps open connection to Postgres for ~10 minutes, then it
disconnects, and `active_time` *could be* bumped a bit again. 'Could be'
because I've seen it once, but it didn't reproduce for a second try.
I think this can create false-positives (hopefully rare), when we will
not suspend some computes because of lagged statistics update OR because
some non-user processes will try to connect to user databases.
Currently, we don't touch them outside of startup and
`postgres_exporter` is configured to do not discover other databases,
but this can change in the future.
New behavior is covered by feature flag `activity_monitor_experimental`,
which should be provided by control plane via neondatabase/cloud#9171
[1] https://www.postgresql.org/docs/current/monitoring-stats.html#MONITORING-PG-STAT-DATABASE-VIEW
Related to neondatabase/cloud#7966, neondatabase/cloud#7198
Postgres can write multiline logs, and they are difficult to handle
after they are mixed with other logs. This PR combines multiline logs
from postgres into a single line, where previous line breaks are
replaced with unicode zero-width spaces. Then postgres logs are written
to stderr with `PG:` prefix.
It makes it easy to distinguish postgres logs from all other compute
logs with a simple grep, e.g. `|= "PG:"`
Otherwise they are left orphaned when compute_ctl is terminated with a
signal. It was invisible most of the time because normally neon_local or k8s
kills postgres directly and then compute_ctl finishes gracefully. However, in
some tests compute_ctl gets stuck waiting for sync-safekeepers which
intentionally never ends because safekeepers are offline, and we want to stop
compute_ctl without leaving orphanes behind.
This is a quite rough approach which doesn't wait for children termination. A
better way would be to convert compute_ctl to async which would make waiting
easy.
- add pgbouncer_settings section to compute spec;
- add pgbouncer-connstr option to compute_ctl.
- add pgbouncer-ini-path option to compute_ctl. Default: /etc/pgbouncer/pgbouncer.ini
Apply pgbouncer config on compute start and respec to override default spec.
Save pgbouncer config updates to pgbouncer.ini to preserve them across pgbouncer restarts.
## Problem
## Summary of changes
## Checklist before requesting a review
- [ ] I have performed a self-review of my code.
- [ ] If it is a core feature, I have added thorough tests.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [ ] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
## Checklist before merging
- [ ] Do not forget to reformat commit message to not include the above
checklist
## Problem
In the past we've rolled out all new `compute_ctl` functionality right
to all users, which could be risky. I want to have a more fine-grained
control over what we enable, in which env and to which users.
## Summary of changes
Add an option to pass a list of feature flags to `compute_ctl`. If not
passed, it defaults to an empty list. Any unknown flags are ignored.
This allows us to release new experimental features safer, as we can
then flip the flag for one specific user, only Neon employees, free /
pro / etc. users and so on. Or control it per environment.
In the current implementation feature flags are passed via compute spec,
so they do not allow controlling behavior of `empty` computes. For them,
we can either stick with the previous approach, i.e. add separate cli
args or introduce a more generic `--features` cli argument.
Temporarily reset neon.max_cluster_size to avoid
the possibility of hitting the limit, while we are applying config:
creating new extensions, roles, etc...
instead of direct S3 request.
Pros:
- simplify code a lot (no need to provide AWS credentials and paths);
- reduce latency of downloading extension data as proxy resides near
computes; -reduce AWS costs as proxy has cache and 1000 computes asking
the same extension will not generate 1000 downloads from S3.
- we can use only one S3 bucket to store extensions (and rid of regional
buckets which were introduced to reduce latency);
Changes:
- deprecate remote-ext-config compute_ctl parameter, use
http://pg-ext-s3-gateway if any old format remote-ext-cofig is provided;
- refactor tests to use mock http server;
- Run CREATE EXTENSION neon for template1, so that it was created in all databases.
- Run ALTER EXTENSION neon in all databases, to always have the newest version of the extension in computes.
- Add test_neon_extension test
## Problem
See https://github.com/neondatabase/company_projects/issues/111
## Summary of changes
Save logical replication files in WAL at compute and include them in
basebackup at pate server.
## Checklist before requesting a review
- [ ] I have performed a self-review of my code.
- [ ] If it is a core feature, I have added thorough tests.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [ ] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
## Checklist before merging
- [ ] Do not forget to reformat commit message to not include the above
checklist
---------
Co-authored-by: Konstantin Knizhnik <knizhnik@neon.tech>
Co-authored-by: Arseny Sher <sher-ars@yandex.ru>
## Problem
In 89275f6c1e we fixed an issue, when we were dropping db in Postgres
even though cplane request failed. Yet, it introduced a new problem that
we now de-register db in cplane even if we didn't actually drop it in
Postgres.
## Summary of changes
Here we revert extension change, so we now again may leave db in invalid
state after failed drop. Instead, `compute_ctl` is now responsible for
cleaning up invalid databases during full configuration. Thus, there are
two ways of recovering from failed DROP DATABASE:
1. User can just repeat DROP DATABASE, same as in Vanilla Postgres.
2. If they didn't, then on next full configuration (dbs / roles changes
in the API; password reset; or data availability check) invalid db
will be cleaned up in the Postgres and re-created by `compute_ctl`. So
again it follows pretty much the same semantics as Vanilla Postgres --
you need to drop it again after failed drop.
That way, we have a recovery trajectory for both problems.
See this commit for info about `invalid` db state:
a4b4cc1d60
According to it:
> An invalid database cannot be connected to anymore, but can still be
dropped.
While on it, this commit also fixes another issue, when `compute_ctl`
was trying to connect to databases with `ALLOW CONNECTIONS false`. Now
it will just skip them.
Fixes#5435
Fixes#4689 by replacing all of `std::Path` , `std::PathBuf` with
`camino::Utf8Path`, `camino::Utf8PathBuf` in
- pageserver
- safekeeper
- control_plane
- libs/remote_storage
Co-authored-by: Joonas Koivunen <joonas@neon.tech>
I've moved it to the API handler in the 589cf1ed2 to do not delay
compute start. Yet, we now skip full configuration and catalog updates
in the most hot path -- waking up suspended compute, and only do it at:
- first start
- start with applying new configuration
- start for availability check
so it doesn't really matter anymore.
The problem with creating the table and test record in the API handler
is that someone can fill up timeline till the logical limit. Then it's
suspended and availability check is scheduled, so it fails.
If table + test row are created at the very beginning, we reserve a 8 KB
page for future checks, which theoretically will last almost forever.
For example, my ~1y old branch still has 8 KB sized test table:
```sql
cloud_admin@postgres=# select pg_relation_size('health_check');
pg_relation_size
------------------
8192
(1 row)
```
---------
Co-authored-by: Anastasia Lubennikova <anastasia@neon.tech>
Starts `postgres` in cgroup directly from `compute_ctl` instead of from
`vm-builder`. This is required because the `vm-monitor` cannot be in the
cgroup it is managing. Otherwise, it itself would be frozen when
freezing the cgroup.
Requires https://github.com/neondatabase/cloud/pull/6331, which adds the
`AUTOSCALING` environment variable letting `compute_ctl` know to start
`postgres` in the cgroup.
Requires https://github.com/neondatabase/autoscaling/pull/468, which
prevents `vm-builder` from starting the monitor and putting postgres in
a cgroup. This will require a `VM_BUILDER_VERSION` bump.
Don't download ext_index.json from s3, but instead receive it as a part of spec from control plane.
This eliminates s3 access for most compute starts,
and also allows us to update extensions spec on the fly
Don't panic if library or extension is not found in remote extension storage
or download has failed. Instead, log the error and proceed - if file is not
present locally as well, postgres will fail with postgres error. If it is a
shared_preload_library, it won't start, because of bad config. Otherwise, it
will just fail to run the SQL function/ command that needs the library.
Also, don't try to download extensions if remote storage is not configured.
Add infrastructure to dynamically load postgres extensions and shared libraries from remote extension storage.
Before postgres start downloads list of available remote extensions and libraries, and also downloads 'shared_preload_libraries'. After postgres is running, 'compute_ctl' listens for HTTP requests to load files.
Postgres has new GUC 'extension_server_port' to specify port on which 'compute_ctl' listens for requests.
When PostgreSQL requests a file, 'compute_ctl' downloads it.
See more details about feature design and remote extension storage layout in docs/rfcs/024-extension-loading.md
---------
Co-authored-by: Anastasia Lubennikova <anastasia@neon.tech>
Co-authored-by: Alek Westover <alek.westover@gmail.com>
