This makes it possible for the compiler to validate that a match block
matched all PostgreSQL versions we support.
## Problem
We did not have a complete picture about which places we had to test
against PG versions, and what format these versions were: The full PG
version ID format (Major/minor/bugfix `MMmmbb`) as transfered in
protocol messages, or only the Major release version (`MM`). This meant
type confusion was rampant.
With this change, it becomes easier to develop new version-dependent
features, by making type and niche confusion impossible.
## Summary of changes
Every use of `pg_version` is now typed as either `PgVersionId` (u32,
valued in decimal `MMmmbb`) or PgMajorVersion (an enum, with a value for
every major version we support, serialized and stored like a u32 with
the value of that major version)
---------
Co-authored-by: Arpad Müller <arpad-m@users.noreply.github.com>
The 1.88.0 stable release is near (this Thursday). We'd like to fix most
warnings beforehand so that the compiler upgrade doesn't require
approval from too many teams.
This is therefore a preparation PR (like similar PRs before it).
There is a lot of changes for this release, mostly because the
`uninlined_format_args` lint has been added to the `style` lint group.
One can read more about the lint
[here](https://rust-lang.github.io/rust-clippy/master/#/uninlined_format_args).
The PR is the result of `cargo +beta clippy --fix` and `cargo fmt`. One
remaining warning is left for the proxy team.
---------
Co-authored-by: Conrad Ludgate <conrad@neon.tech>
## Problem
Pageservers now expose a gRPC API on a separate address and port. This
must be registered with the storage controller such that it can be
plumbed through to the compute via cplane.
Touches #11926.
## Summary of changes
This patch registers the gRPC address and port with the storage
controller:
* Add gRPC address to `nodes` database table and `NodePersistence`, with
a Diesel migration.
* Add gRPC address in `NodeMetadata`, `NodeRegisterRequest`,
`NodeDescribeResponse`, and `TenantLocateResponseShard`.
* Add gRPC address flags to `storcon_cli node-register`.
These changes are backwards-compatible, since all structs will ignore
unknown fields during deserialization.
neon_local's timeline import subcommand creates timelines manually, but
doesn't create them on the safekeepers. If a test then tries to open an
endpoint to read from the timeline, it will error in the new world with
`--timelines-onto-safekeepers`.
Therefore, if that flag is enabled, create the timelines on the
safekeepers.
Note that this import functionality is different from the fast import
feature (https://github.com/neondatabase/neon/issues/10188, #11801).
Part of #11670
As well as part of #11712
## Problem
We support two ingest protocols on the pageserver: vanilla and
interpreted.
Interpreted has been the only protocol in use for a long time.
## Summary of changes
* Remove the ingest handling of the vanilla protocol
* Remove tenant and pageserver configuration for it
* Update all tests that tweaked the ingest protocol
## Compatibility
Backward compatibility:
* The new pageserver version can read the existing pageserver
configuration and it will ignore the unknown field.
* When the tenant config is read from the storcon db or from the
pageserver disk, the extra field will be ignored.
Forward compatiblity:
* Both the pageserver config and the tenant config map missing fields to
their default value.
I'm not aware of any tenant level override that was made for this knob.
## Problem
We want to expose the page service over gRPC, for use with the
communicator.
Requires #11995.
Touches #11728.
## Summary of changes
This patch wires up a gRPC server in the Pageserver, using Tonic. It
does not yet implement the actual page service.
* Adds `listen_grpc_addr` and `grpc_auth_type` config options (disabled
by default).
* Enables gRPC by default with `neon_local`.
* Stub implementation of `page_api.PageService`, returning unimplemented
errors.
* gRPC reflection service for use with e.g. `grpcurl`.
Subsequent PRs will implement the actual page service, including
authentication and observability.
Notably, TLS support is not yet implemented. Certificate reloading
requires us to reimplement the entire Tonic gRPC server.
## Problem
Basebackup cache is on the hot path of compute startup and is generated
on every request (may be slow).
- Issue: https://github.com/neondatabase/cloud/issues/29353
## Summary of changes
- Add `BasebackupCache` which stores basebackups on local disk.
- Basebackup prepare requests are triggered by
`XLOG_CHECKPOINT_SHUTDOWN` records in the log.
- Limit the size of the cache by number of entries.
- Add `basebackup_cache_enabled` feature flag to TenantConfig.
- Write tests for the cache
## Not implemented yet
- Limit the size of the cache by total size in bytes
---------
Co-authored-by: Aleksandr Sarantsev <aleksandr@neon.tech>
## Problem
See
Discussion:
https://neondb.slack.com/archives/C033RQ5SPDH/p1746645666075799
Issue: https://github.com/neondatabase/cloud/issues/28609
Relation size cache is not correctly updated at PS in case of replicas.
## Summary of changes
1. Have two caches for relation size in timeline:
`rel_size_primary_cache` and `rel_size_replica_cache`.
2. `rel_size_primary_cache` is actually what we have now. The only
difference is that it is not updated in `get_rel_size`, only by WAL
ingestion
3. `rel_size_replica_cache` has limited size (LruCache) and it's key is
`(Lsn,RelTag)` . It is updated in `get_rel_size`. Only strict LSN
matches are accepted as cache hit.
---------
Co-authored-by: Konstantin Knizhnik <knizhnik@neon.tech>
## Problem
Broker supports only HTTP, no HTTPS
- Closes: https://github.com/neondatabase/cloud/issues/27492
## Summary of changes
- Add `listen_https_addr`, `ssl_key_file`, `ssl_cert_file`,
`ssl_cert_reload_period` arguments to storage broker
- Make `listen_addr` argument optional
- Listen https in storage broker
- Support https for storage broker request in neon_local
- Add `use_https_storage_broker_api` option to NeonEnvBuilder
## Problem
Splits of large tenants (several TB) can cause a huge amount of shard
ancestor compaction work, which can overload Pageservers.
Touches https://github.com/neondatabase/cloud/issues/22532.
## Summary of changes
Add a setting `compaction_shard_ancestor` (default `true`) to disable
shard ancestor compaction on a per-tenant basis.
## Problem
Part of #9114
There was a debug-mode verification mode that verifies at every
retain_lsn. However, the code was tangled within the actual history
generation itself and it's hard to reason about correctness. This patch
adds a separate post-verification of the gc-compaction result that redos
logs at every retain_lsn and every record above the GC horizon. This
ensures that all key history we produce with gc-compaction is readable,
and if there're read errors after gc-compaction, it can only be
read-path errors instead of gc-compaction bugs.
## Summary of changes
* Add gc_compaction_verification flag, default to true.
* Implement a post-verification process.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
## Problem
https://github.com/neondatabase/neon/pull/11140 introduces performance
tracing with OTEL
and a pageserver config which configures the sampling ratio of get page
requests.
Enabling a non-zero sampling ratio on a per region basis is too
aggressive and comes with perf
impact that isn't very well understood yet.
## Summary of changes
Add a `sampling_ratio` tenant level config which overrides the
pageserver level config.
Note that we do not cache the config and load it on every get page
request such that changes propagate
timely.
Note that I've had to remove the `SHARD_SELECTION` span to get this to
work. The tracing library doesn't
expose a neat way to drop a span if one realises it's not needed at
runtime.
Closes https://github.com/neondatabase/neon/issues/11392
## Problem
Previously, L0 flushes would wait for uploads, as a simple form of
backpressure. However, this prevented flush pipelining and upload
parallelism. It has since been disabled by default and replaced by L0
compaction backpressure.
Touches https://github.com/neondatabase/cloud/issues/24664.
## Summary of changes
This patch removes L0 flush upload waits, along with the
`l0_flush_wait_upload`. This can't be merged until the setting has been
removed across the fleet.
## Problem
- We need to support multiple SSL CA certificates for graceful root CA
certificate rotation.
- Closes: https://github.com/neondatabase/cloud/issues/25971
## Summary of changes
- Parses `ssl_ca_file` as a pem bundle, which may contain multiple
certificates. Single pem cert is a valid pem bundle, so the change is
backward compatible.
## Problem
- Part of https://github.com/neondatabase/neon/issues/11113
- Building a new `reqwest::Client` for every request is expensive
because it parses CA certs under the hood. It's noticeable in storcon's
flamegraph.
## Summary of changes
- Reuse one `reqwest::Client` for all API calls to avoid parsing CA
certificates every time.
## Problem
Pageservers use unencrypted HTTP requests for storage controller API.
- Closes: https://github.com/neondatabase/cloud/issues/25524
## Summary of changes
- Replace hyper0::server::Server with http_utils::server::Server in
storage controller.
- Add HTTPS handler for storage controller API.
- Support `ssl_ca_file` in pageserver.
Migrates the remaining crates to edition 2024. We like to stay on the
latest edition if possible. There is no functional changes, however some
code changes had to be done to accommodate the edition's breaking
changes.
Like the previous migration PRs, this is comprised of three commits:
* the first does the edition update and makes `cargo check`/`cargo
clippy` pass. we had to update bindgen to make its output [satisfy the
requirements of edition
2024](https://doc.rust-lang.org/edition-guide/rust-2024/unsafe-extern.html)
* the second commit does a `cargo fmt` for the new style edition.
* the third commit reorders imports as a one-off change. As before, it
is entirely optional.
Part of #10918
## Problem
The storage controller treats durations in the tenant config as strings.
These are loaded from the db.
The pageserver maps these durations to a seconds only format and we
always get a mismatch compared
to what's in the db.
## Summary of changes
Treat durations as durations inside the storage controller and not as
strings.
Nothing changes in the cross service API's themselves or the way things
are stored in the db.
I also added some logging which I would have made the investigation a
10min job:
1. Reason for why the reconciliation was spawned
2. Location config diff between the observed and wanted states
## Problem
L0 compaction frequently gets starved out by other background tasks and
image/GC compaction. L0 compaction must be responsive to keep read
amplification under control.
Touches #10694.
Resolves#10689.
## Summary of changes
Use a separate semaphore for the L0-only compaction pass.
* Add a `CONCURRENT_L0_COMPACTION_TASKS` semaphore and
`BackgroundLoopKind::L0Compaction`.
* Add a setting `compaction_l0_semaphore` (default off via
`compaction_l0_first`).
* Use the L0 semaphore when doing an `OnlyL0Compaction` pass.
* Use the background semaphore when doing a regular compaction pass
(which includes an initial L0 pass).
* While waiting for the background semaphore, yield for L0 compaction if
triggered.
* Add `CompactFlags::NoYield` to disable L0 yielding, and set it for the
HTTP API route.
* Remove the old `use_compaction_semaphore` setting and
compaction-scoped semaphore.
* Remove the warning when waiting for a semaphore; it's noisy and we
have metrics.
## Problem
Image compaction can starve out L0 compaction if a tenant has several
timelines with L0 debt.
Touches #10694.
Requires #10740.
## Summary of changes
* Add an initial L0 compaction pass, in order of L0 count.
* Add a tenant option `compaction_l0_first` to control the L0 pass
(disabled by default).
* Add `CompactFlags::OnlyL0Compaction` to run an L0-only compaction
pass.
* Clean up the compaction iteration logic.
A later PR will use separate semaphores for the L0 and image compaction
passes to avoid cross-tenant L0 starvation. That PR will also make image
compaction yield if _any_ of the tenant's timelines have pending L0
compaction to further avoid starvation.
## Problem
Image layer generation could block L0 compactions for a long time.
## Summary of changes
* Refactored the return value of `create_image_layers_for_*` functions
to make it self-explainable.
* Preempt image layer generation in `Try` mode if L0 piles up.
Note that we might potentially run into a state that only the beginning
part of the keyspace gets image coverage. In that case, we either need
to implement something to prioritize some keyspaces with image coverage,
or tune the image_creation_threshold to ensure that the frequency of
image creation could keep up with L0 compaction.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
Co-authored-by: Erik Grinaker <erik@neon.tech>
## Problem
Follow-up of the incident, we should not use the same bound on
lower/upper limit of compaction files. This patch adds an upper bound
limit, which is set to 50 for now.
## Summary of changes
Add `compaction_upper_limit`.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
Co-authored-by: Christian Schwarz <christian@neon.tech>
## Problem
We need a setting to disable the flush upload wait, to test L0 flush
backpressure in staging.
## Summary of changes
Add `l0_flush_wait_upload` setting.
## Problem
There is no direct backpressure for compaction and L0 read
amplification. This allows a large buildup of compaction debt and read
amplification.
Resolves#5415.
Requires #10402.
## Summary of changes
Delay layer flushes based on the number of level 0 delta layers:
* `l0_flush_delay_threshold`: delay flushes such that they take 2x as
long (default `2 * compaction_threshold`).
* `l0_flush_stall_threshold`: stall flushes until level 0 delta layers
drop below threshold (default `4 * compaction_threshold`).
If either threshold is reached, ephemeral layer rolls also synchronously
wait for layer flushes to propagate this backpressure up into WAL
ingestion. This will bound the number of frozen layers to 1 once
backpressure kicks in, since all other frozen layers must flush before
the rolled layer.
## Analysis
This will significantly change the compute backpressure characteristics.
Recall the three compute backpressure knobs:
* `max_replication_write_lag`: 500 MB (based on Pageserver
`last_received_lsn`).
* `max_replication_flush_lag`: 10 GB (based on Pageserver
`disk_consistent_lsn`).
* `max_replication_apply_lag`: disabled (based on Pageserver
`remote_consistent_lsn`).
Previously, the Pageserver would keep ingesting WAL and build up
ephemeral layers and L0 layers until the compute hit
`max_replication_flush_lag` at 10 GB and began backpressuring. Now, once
we delay/stall WAL ingestion, the compute will begin backpressuring
after `max_replication_write_lag`, i.e. 500 MB. This is probably a good
thing (we're not building up a ton of compaction debt), but we should
consider tuning these settings.
`max_replication_flush_lag` probably doesn't serve a purpose anymore,
and we should consider removing it.
Furthermore, the removal of the upload barrier in #10402 will mean that
we no longer backpressure flushes based on S3 uploads, since
`max_replication_apply_lag` is disabled. We should consider enabling
this as well.
### When and what do we compact?
Default compaction settings:
* `compaction_threshold`: 10 L0 delta layers.
* `compaction_period`: 20 seconds (between each compaction loop check).
* `checkpoint_distance`: 256 MB (size of L0 delta layers).
* `l0_flush_delay_threshold`: 20 L0 delta layers.
* `l0_flush_stall_threshold`: 40 L0 delta layers.
Compaction characteristics:
* Minimum compaction volume: 10 layers * 256 MB = 2.5 GB.
* Additional compaction volume (assuming 128 MB/s WAL): 128 MB/s * 20
seconds = 2.5 GB (10 L0 layers).
* Required compaction bandwidth: 5.0 GB / 20 seconds = 256 MB/s.
### When do we hit `max_replication_write_lag`?
Depending on how fast compaction and flushes happens, the compute will
backpressure somewhere between `l0_flush_delay_threshold` or
`l0_flush_stall_threshold` + `max_replication_write_lag`.
* Minimum compute backpressure lag: 20 layers * 256 MB + 500 MB = 5.6 GB
* Maximum compute backpressure lag: 40 layers * 256 MB + 500 MB = 10.0
GB
This seems like a reasonable range to me.
## Problem
part of https://github.com/neondatabase/neon/issues/9114
The automatic trigger is already implemented at
https://github.com/neondatabase/neon/pull/10221 but I need to write some
tests and finish my experiments in staging before I can merge it with
confidence. Given that I have some other patches that will modify the
config items, I'd like to get the config items merged first to reduce
conflicts.
## Summary of changes
* add `l2_lsn` to index_part.json -- below that LSN, data have been
processed by gc-compaction
* add a set of gc-compaction auto trigger control items into the config
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
## Problem
`neon_local` has always been unsafe to run concurrently with itself: it
uses simple text files for persistent state, and concurrent runs will
step on each other.
In some test environments we intentionally handle this with mutexes in
python land, but it's fragile to try and always remember to do that.
## Summary of changes
- Add a `flock` based mutex around the `main` function of neon_local,
using the repo directory as the file to lock
- Clean up an Option<> around control_plane_api, this is a drive-by
change because it was one of the fields that had a weird effect when
previous concurrent stuff stamped on it.
## Problem
Cplane and storage controller tenant config changes are not additive.
Any change overrides all existing tenant configs. This would be fine if
both did client side patching, but that's not the case.
Once this merges, we must update cplane to use the PATCH endpoint.
## Summary of changes
### High Level
Allow for patching of tenant configuration with a `PATCH
/v1/tenant/config` endpoint.
It takes the same data as it's PUT counterpart. For example the payload
below will update `gc_period` and unset `compaction_period`. All other
fields are left in their original state.
```
{
"tenant_id": "1234",
"gc_period": "10s",
"compaction_period": null
}
```
### Low Level
* PS and storcon gain `PATCH /v1/tenant/config` endpoints. PS endpoint
is only used for cplane managed instances.
* `storcon_cli` is updated to have separate commands for
`set-tenant-config` and `patch-tenant-config`
Related https://github.com/neondatabase/cloud/issues/21043
## Problem
In test environments, the `syncfs` that the pageserver does on startup
can take a long time, as other tests running concurrently might have
many gigabytes of dirty pages.
## Summary of changes
- Add a `no_sync` option to the pageserver's config.
- Skip syncfs on startup if this is set
- A subsequent PR (https://github.com/neondatabase/neon/pull/9678) will
enable this by default in tests. We need to wait until after the next
release to avoid breaking compat tests, which would fail if we set
no_sync & use an old pageserver binary.
Q: Why is this a different mechanism than safekeeper, which as a
--no-sync CLI?
A: Because the way we manage pageservers in neon_local depends on the
pageserver.toml containing the full configuration, whereas safekeepers
have a config file which is neon-local-specific and can drive a CLI
flag.
Q: Why is the option no_sync rather than sync?
A: For boolean configs with a dangerous value, it's preferable to make
"false" the safe option, so that any downstream future config tooling
that might have a "booleans are false by default" behavior (e.g. golang
structs) is safe by default.
Q: Why only skip the syncfs, and not all fsyncs?
A: Skipping all fsyncs would require more code changes, and the most
acute problem isn't fsyncs themselves (these just slow down a running
test), it's the syncfs (which makes a pageserver startup slow as a
result of _other_ tests)
Since 5f83c9290b482dc90006c400dfc68e85a17af785/#1504 we've had
duplication in construction of models::TenantConfig, where both
constructs contained the same code. This PR removes one of the two
locations to avoid the duplication.
## Problem
Part of https://github.com/neondatabase/neon/issues/8623
## Summary of changes
Removed all aux-v1 config processing code. Note that we persisted it
into the index part file, so we cannot really remove the field from
index part. I also kept the config item within the tenant config, but we
will not read it any more.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
# Problem
Timeline creation can either be bootstrap or branch.
The distinction is made based on whether the `ancestor_*` fields are
present or not.
In the PGDATA import code
(https://github.com/neondatabase/neon/pull/9218), I add a third variant
to timeline creation.
# Solution
The above pushed me to refactor the code in Pageserver to distinguish
the different creation requests through enum variants.
There is no externally observable effect from this change.
On the implementation level, a notable change is that the acquisition of
the `TimelineCreationGuard` happens later than before. This is necessary
so that we have everything in place to construct the
`CreateTimelineIdempotency`. Notably, this moves the acquisition of the
creation guard _after_ the acquisition of the `gc_cs` lock in the case
of branching. This might appear as if we're at risk of holding `gc_cs`
longer than before this PR, but, even before this PR, we were holding
`gc_cs` until after the `wait_completion()` that makes the timeline
creation durable in S3 returns. I don't see any deadlock risk with
reversing the lock acquisition order.
As a drive-by change, I found that the `create_timeline()` function in
`neon_local` is unused, so I removed it.
# Refs
* platform context: https://github.com/neondatabase/neon/pull/9218
* product context: https://github.com/neondatabase/cloud/issues/17507
* next PR stacked atop this one:
https://github.com/neondatabase/neon/pull/9501
## Problem
Neon local set-up does not inject an az id in `metadata.json`. See real
change in https://github.com/neondatabase/neon/pull/8852.
## Summary of changes
We piggyback on the existing `availability_zone` pageserver
configuration in order to avoid making neon local even more complex.
## Problem
There are something wrong in the comment of
`control_plane/src/broker.rs` and `control_plane/src/pageserver.rs`
## Summary of changes
Fixed the comment about component name and their data path in
`control_plane/src/broker.rs` and `control_plane/src/pageserver.rs`.
`trace_read_requests` is a per `Tenant`-object option.
But the `handle_pagerequests` loop doesn't know which
`Tenant` object (i.e., which shard) the request is for.
The remaining use of the `Tenant` object is to check `tenant.cancel`.
That check is incorrect [if the pageserver hosts multiple
shards](https://github.com/neondatabase/neon/issues/7427#issuecomment-2220577518).
I'll fix that in a future PR where I completely eliminate the holding
of `Tenant/Timeline` objects across requests.
See [my code RFC](https://github.com/neondatabase/neon/pull/8286) for
the
high level idea.
Note that we can always bring the tracing functionality if we need it.
But since it's actually about logging the `page_service` wire bytes,
it should be a `page_service`-level config option, not per-Tenant.
And for enabling tracing on a single connection, we can implement
a `set pageserver_trace_connection;` option.
I want to fix bugs in `page_service`
([issue](https://github.com/neondatabase/neon/issues/7427)) and the
`import basebackup` / `import wal` stand in the way / make the
refactoring more complicated.
We don't use these methods anyway in practice, but, there have been some
objections to removing the functionality completely.
So, this PR preserves the existing functionality but moves it into the
HTTP management API.
Note that I don't try to fix existing bugs in the code, specifically not
fixing
* it only ever worked correctly for unsharded tenants
* it doesn't clean up on error
All errors are mapped to `ApiError::InternalServerError`.
## Problem
For some time, we have created tenants with calls to location_conf. The
legacy "POST /v1/tenant" path was only used in some tests.
## Summary of changes
- Remove the API
- Relocate TenantCreateRequest to the controller API file (this used to
be used in both pageserver and controller APIs)
- Rewrite tenant_create test helper to use location_config API, as
control plane and storage controller do
- Update docker-compose test script to create tenants with
location_config API (this small commit is also present in
https://github.com/neondatabase/neon/pull/7947)
## Problem
see https://github.com/neondatabase/neon/issues/8070
## Summary of changes
the neon_local subcommands to
- start neon
- start pageserver
- start safekeeper
- start storage controller
get a new option -t=xx or --start-timeout=xx which allows to specify a
longer timeout in seconds we wait for the process start.
This is useful in test cases where the pageserver has to read a lot of
layer data, like in pagebench test cases.
In addition we exploit the new timeout option in the python test
infrastructure (python fixtures) and modify the flaky testcase to
increase the timeout from 10 seconds to 1 minute.
Example from the test execution
```bash
RUST_BACKTRACE=1 NEON_ENV_BUILDER_USE_OVERLAYFS_FOR_SNAPSHOTS=1 DEFAULT_PG_VERSION=15 BUILD_TYPE=release ./scripts/pytest test_runner/performance/pageserver/pagebench/test_pageserver_max_throughput_getpage_at_latest_lsn.py
...
2024-06-19 09:29:34.590 INFO [neon_fixtures.py:1513] Running command "/instance_store/neon/target/release/neon_local storage_controller start --start-timeout=60s"
2024-06-19 09:29:36.365 INFO [broker.py:34] starting storage_broker to listen incoming connections at "127.0.0.1:15001"
2024-06-19 09:29:36.365 INFO [neon_fixtures.py:1513] Running command "/instance_store/neon/target/release/neon_local pageserver start --id=1 --start-timeout=60s"
2024-06-19 09:29:36.366 INFO [neon_fixtures.py:1513] Running command "/instance_store/neon/target/release/neon_local safekeeper start 1 --start-timeout=60s"
```
Part of #7497, extracts from #7996, closes#8063.
## Problem
With the LSN lease API introduced in
https://github.com/neondatabase/neon/issues/7808, we want to implement
the real lease logic so that GC will
keep all the layers needed to reconstruct all pages at all the leased
LSNs with valid leases at a given time.
Signed-off-by: Yuchen Liang <yuchen@neon.tech>
Before this PR, `neon_local` would store a copy of a subset of the
initial `pageserver.toml` in its `.neon/config`, e.g, `listen_pg_addr`.
That copy is represented as `struct PageServerConf`.
This copy was used to inform e.g., `neon_local endpoint` and other
commands that depend on Pageserver about which port to connect to.
The problem with that scheme is that the duplicated information in
`.neon/config` can get stale if `pageserver.toml` is changed.
This PR fixes that by eliminating populating `struct PageServerConf`
from the `pageserver.toml`s.
The `[[pageservers]]` TOML table in the `.neon/config` is obsolete.
As of this PR, `neon_local` will fail to start and print an error
informing about this change.
Code-level changes:
- Remove the `--pg-version` flag, it was only used for some checks
during `neon_local init`
- Remove the warn-but-continue behavior for when auth key creation fails
but auth keys are not required. It's just complexity that is unjustified
for a tool like `neon_local`.
- Introduce a type-system-level distinction between the runtime state
and the two (!) toml formats that are almost the same but not quite.
- runtime state: `struct PageServerConf`, now without `serde` derives
- toml format 1: the state in `.neon/config` => `struct OnDiskState`
- toml format 2: the `neon_local init --config TMPFILE` that, unlike
`struct OnDiskState`, allows specifying `pageservers`
- Remove `[[pageservers]]` from the `struct OnDiskState` and load the
data from the individual `pageserver.toml`s instead.
This does to `neon_local` what
https://github.com/neondatabase/aws/pull/1322 does to our production
deployment.
After both are merged, there are no users of `pageserver --init` /
`pageserver --config-override` left, and we can remove those flags
eventually.
This pull request adds the new basebackup read path + aux file write
path. In the regression test, all logical replication tests are run with
matrix aux_file_v2=false/true.
Also fixed the vectored get code path to correctly return missing key
error when being called from the unified sequential get code path.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
Preceding PR https://github.com/neondatabase/neon/pull/7613 reduced the
usage of `--pageserver-config-override`.
This PR builds on top of that work and fully removes the `neon_local
--pageserver-config-override`.
Tests that need a non-default `pageserver.toml` control it using two
options:
1. Specify `NeonEnvBuilder.pageserver_config_override` before
`NeonEnvBuilder.init_start()`. This uses a new `neon_local init
--pageserver-config` flag.
2. After `init_start()`: `env.pageserver.stop()` +
`NeonPageserver.edit_config_toml()` + `env.pageserver.start()`
A few test cases were using
`env.pageserver.start(overrides=("--pageserver-config-override...",))`.
I changed them to use one of the options above.
Future Work
-----------
The `neon_local init --pageserver-config` flag still uses `pageserver
--config-override` under the hood. In the future, neon_local should just
write the `pageserver.toml` directly.
The `NeonEnvBuilder.pageserver_config_override` field should be renamed
to `pageserver_initial_config`. Let's save this churn for a separate
refactor commit.
