Follow-up of #9234 to give hyper 1.0 the version-free name, and the
legacy version of hyper the one with the version number inside. As we
move away from hyper 0.14, we can remove the `hyper0` name piece by
piece.
Part of #9255
Part of #7497, closes#8817.
## Problem
See #8817.
## Summary of changes
**compute_ctl**
- Renew lsn lease as soon as `/configure` updates pageserver_connstr,
use `state_changed` Condvar for synchronization.
**pageserver**
As mentioned in
https://github.com/neondatabase/neon/issues/8817#issuecomment-2315768076,
we still want some permanent error reported if a lease cannot be
granted. By considering attachment mode and the added
`lsn_lease_deadline` when processing lease requests, we can also bound
the case of bad requests to a very short period after migration/restart.
- Refactor https://github.com/neondatabase/neon/pull/9024 and move
`lsn_lease_deadline` to `AttachedTenantConf` so timeline can easily
access it.
- Have separate HTTP `init_lsn_lease` and libpq `renew_lsn_lease` API.
- Always do LSN verification for the initial HTTP lease request.
- LSN verification for the renewal is **still done** when tenants are
not in `AttachedSingle` and we have pass the `lsn_lease_deadline`, which
give plenty of time for compute to renew the lease.
**neon_local**
- add and call `timeline_init_lsn_lease` mgmt_api at static endpoint
start. The initial lsn lease http request is sent when we run `cargo
neon endpoint start <static endpoint>`.
## Testing
- Extend `test_readonly_node_gc` to do pageserver restarts and
migration.
## Future Work
- The control plane should make the initial lease request through HTTP
when creating a static endpoint. This is currently only done in
`neon_local`.
Signed-off-by: Yuchen Liang <yuchen@neon.tech>
Removes additional async_trait usages from safekeeper and neon_local.
Also removes now redundant dependencies of the `async_trait` crate.
cc earlier work: #6305, #6464, #7303, #7342, #7212, #8296
When `NeonEnv.from_repo_dir` was introduced, storage controller stored
its
state exclusively `attachments.json`.
Since then, it has moved to using Postgres, which stores its state in
`storage_controller_db`.
But `NeonEnv.from_repo_dir` wasn't adjusted to do this.
This PR rectifies the situation.
Context for this is failures in
`test_pageserver_characterize_throughput_with_n_tenants`
CF:
https://neondb.slack.com/archives/C033RQ5SPDH/p1721035799502239?thread_ts=1720901332.293769&cid=C033RQ5SPDH
Notably, `from_repo_dir` is also used by the backwards- and
forwards-compatibility.
Thus, the changes in this PR affect those tests as well.
However, it turns out that the compatibility snapshot already contains
the `storage_controller_db`.
Thus, it should just work and in fact we can remove hacks like
`fixup_storage_controller`.
Follow-ups created as part of this work:
* https://github.com/neondatabase/neon/issues/8399
* https://github.com/neondatabase/neon/issues/8400
Preceding PR https://github.com/neondatabase/neon/pull/7613 reduced the
usage of `--pageserver-config-override`.
This PR builds on top of that work and fully removes the `neon_local
--pageserver-config-override`.
Tests that need a non-default `pageserver.toml` control it using two
options:
1. Specify `NeonEnvBuilder.pageserver_config_override` before
`NeonEnvBuilder.init_start()`. This uses a new `neon_local init
--pageserver-config` flag.
2. After `init_start()`: `env.pageserver.stop()` +
`NeonPageserver.edit_config_toml()` + `env.pageserver.start()`
A few test cases were using
`env.pageserver.start(overrides=("--pageserver-config-override...",))`.
I changed them to use one of the options above.
Future Work
-----------
The `neon_local init --pageserver-config` flag still uses `pageserver
--config-override` under the hood. In the future, neon_local should just
write the `pageserver.toml` directly.
The `NeonEnvBuilder.pageserver_config_override` field should be renamed
to `pageserver_initial_config`. Let's save this churn for a separate
refactor commit.
## Problem
Storage controller was observed to have unexpectedly large memory
consumption when loaded with many thousands of shards.
This was recently fixed:
- https://github.com/neondatabase/neon/pull/7493
...but we need a general test that the controller is well behaved with
thousands of shards.
Closes: https://github.com/neondatabase/neon/issues/7460
Closes: https://github.com/neondatabase/neon/issues/7463
## Summary of changes
- Add test test_storage_controller_many_tenants to exercise the system's
behaviour with a more substantial workload. This test measures memory
consumption and reproduces #7460 before the other changes in this PR.
- Tweak reconcile_all's return value to make it nonzero if it spawns no
reconcilers, but _would_ have spawned some reconcilers if they weren't
blocked by the reconcile concurrency limit. This makes the test's
reconcile_until_idle behave as expected (i.e. not complete until the
system is nice and calm).
- Fix an issue where tenant migrations would leave a spurious secondary
location when migrated to some location that was not already their
secondary (this was an existing low-impact bug that tripped up the
test's consistency checks).
On the test with 8000 shards, the resident memory per shard is about
20KiB. This is not really per-shard memory: the primary source of memory
growth is the number of concurrent network/db clients we create.
With 8000 shards, the test takes 125s to run on my workstation.
## Problem
If a pageserver was offline when the storage controller started, there
was no mechanism to update the
storage controller state when the pageserver becomes active.
## Summary of changes
* Add a heartbeater module. The heartbeater must be driven by an
external loop.
* Integrate the heartbeater into the service.
- Extend the types used by the service and scheduler to keep track of a
nodes' utilisation score.
- Add a background loop to drive the heartbeater and update the state
based on the deltas it generated
- Do an initial round of heartbeats at start-up
## Problem
In https://github.com/neondatabase/neon/pull/6637, we remove the need to
run migrations externally, but for compat tests to work we can't remove
those invocations from the neon_local binary.
Once that previous PR merges, we can make the followup changes without
upsetting compat tests.
## Problem
Spun off from https://github.com/neondatabase/neon/pull/6394 -- this PR
is just the persistence parts and the changes that enable it to work
nicely
## Summary of changes
- Revert #6444 and #6450
- In neon_local, start a vanilla postgres instance for the attachment
service to use.
- Adopt `diesel` crate for database access in attachment service. This
uses raw SQL migrations as the source of truth for the schema, so it's a
soft dependency: we can switch libraries pretty easily.
- Rewrite persistence.rs to use postgres (via diesel) instead of JSON.
- Preserve JSON read+write at startup and shutdown: this enables using
the JSON format in compatibility tests, so that we don't have to commit
to our DB schema yet.
- In neon_local, run database creation + migrations before starting
attachment service
- Run the initial reconciliation in Service::spawn in the background, so
that the pageserver + attachment service don't get stuck waiting for
each other to start, when restarting both together in a test.
refs https://github.com/neondatabase/neon/issues/6473
Before this PR, if process_started() didn't return Ok(true) until we
ran out of retries, we'd return an error but leave the process running.
Try it by adding a 20s sleep to the pageserver `main()`, e.g., right
before we claim the pidfile.
Without this PR, output looks like so:
```
(.venv) cs@devvm-mbp:[~/src/neon-work-2]: ./target/debug/neon_local start
Starting neon broker at 127.0.0.1:50051.
storage_broker started, pid: 2710939
.
attachment_service started, pid: 2710949
Starting pageserver node 1 at '127.0.0.1:64000' in ".neon/pageserver_1".....
pageserver has not started yet, continuing to wait.....
pageserver 1 start failed: pageserver did not start in 10 seconds
No process is holding the pidfile. The process must have already exited. Leave in place to avoid race conditions: ".neon/pageserver_1/pageserver.pid"
No process is holding the pidfile. The process must have already exited. Leave in place to avoid race conditions: ".neon/safekeepers/sk1/safekeeper.pid"
Stopping storage_broker with pid 2710939 immediately.......
storage_broker has not stopped yet, continuing to wait.....
neon broker stop failed: storage_broker with pid 2710939 did not stop in 10 seconds
Stopping attachment_service with pid 2710949 immediately.......
attachment_service has not stopped yet, continuing to wait.....
attachment service stop failed: attachment_service with pid 2710949 did not stop in 10 seconds
```
and we leak the pageserver process
```
(.venv) cs@devvm-mbp:[~/src/neon-work-2]: ps aux | grep pageserver
cs 2710959 0.0 0.2 2377960 47616 pts/4 Sl 14:36 0:00 /home/cs/src/neon-work-2/target/debug/pageserver -D .neon/pageserver_1 -c id=1 -c pg_distrib_dir='/home/cs/src/neon-work-2/pg_install' -c http_auth_type='Trust' -c pg_auth_type='Trust' -c listen_http_addr='127.0.0.1:9898' -c listen_pg_addr='127.0.0.1:64000' -c broker_endpoint='http://127.0.0.1:50051/' -c control_plane_api='http://127.0.0.1:1234/' -c remote_storage={local_path='../local_fs_remote_storage/pageserver'}
```
After this PR, there is no leaked process.
Part of getpage@lsn benchmark epic:
https://github.com/neondatabase/neon/issues/5771
This PR moves the control plane's spread-all-over-the-place client for
the pageserver management API into a separate module within the
pageserver crate.
I need that client to be async in my benchmarking work, so, this PR
switches to the async version of `reqwest`.
That is also the right direction generally IMO.
The switch to async in turn mandated converting most of the
`control_plane/` code to async.
Note that some of the client methods should be taking `TenantShardId`
instead of `TenantId`, but, none of the callers seem to be
sharding-aware.
Leaving that for another time:
https://github.com/neondatabase/neon/issues/6154
Fixes#4689 by replacing all of `std::Path` , `std::PathBuf` with
`camino::Utf8Path`, `camino::Utf8PathBuf` in
- pageserver
- safekeeper
- control_plane
- libs/remote_storage
Co-authored-by: Joonas Koivunen <joonas@neon.tech>
## Problem
- #5050
Closes: https://github.com/neondatabase/neon/issues/5136
## Summary of changes
- A new configuration property `control_plane_api` controls other
functionality in this PR: if it is unset (default) then everything still
works as it does today.
- If `control_plane_api` is set, then on startup we call out to control
plane `/re-attach` endpoint to discover our attachments and their
generations. If an attachment is missing from the response we implicitly
detach the tenant.
- Calls to pageserver `/attach` API may include a `generation`
parameter. If `control_plane_api` is set, then this parameter is
mandatory.
- RemoteTimelineClient's loading of index_part.json is generation-aware,
and will try to load the index_part with the most recent generation <=
its own generation.
- The `neon_local` testing environment now includes a new binary
`attachment_service` which implements the endpoints that the pageserver
requires to operate. This is on by default if running `cargo neon` by
hand. In `test_runner/` tests, it is off by default: existing tests
continue to run with in the legacy generation-less mode.
Caveats:
- The re-attachment during startup assumes that we are only re-attaching
tenants that have previously been attached, and not totally new tenants
-- this relies on the control plane's attachment logic to keep retrying
so that we should eventually see the attach API call. That's important
because the `/re-attach` API doesn't tell us which timelines we should
attach -- we still use local disk state for that. Ref:
https://github.com/neondatabase/neon/issues/5173
- Testing: generations are only enabled for one integration test right
now (test_pageserver_restart), as a smoke test that all the machinery
basically works. Writing fuller tests that stress tenant migration will
come later, and involve extending our test fixtures to deal with
multiple pageservers.
- I'm not in love with "attachment_service" as a name for the neon_local
component, but it's not very important because we can easily rename
these test bits whenever we want.
- Limited observability when in re-attach on startup: when I add
generation validation for deletions in a later PR, I want to wrap up the
control plane API calls in some small client class that will expose
metrics for things like errors calling the control plane API, which will
act as a strong red signal that something is not right.
Co-authored-by: Christian Schwarz <christian@neon.tech>
Co-authored-by: Joonas Koivunen <joonas@neon.tech>
Add infrastructure to dynamically load postgres extensions and shared libraries from remote extension storage.
Before postgres start downloads list of available remote extensions and libraries, and also downloads 'shared_preload_libraries'. After postgres is running, 'compute_ctl' listens for HTTP requests to load files.
Postgres has new GUC 'extension_server_port' to specify port on which 'compute_ctl' listens for requests.
When PostgreSQL requests a file, 'compute_ctl' downloads it.
See more details about feature design and remote extension storage layout in docs/rfcs/024-extension-loading.md
---------
Co-authored-by: Anastasia Lubennikova <anastasia@neon.tech>
Co-authored-by: Alek Westover <alek.westover@gmail.com>
- Add support for splitting async postgres_backend into read and write halfes.
Safekeeper needs this for bidirectional streams. To this end, encapsulate
reading-writing postgres messages to framed.rs with split support without any
additional changes (relying on BufRead for reading and BytesMut out buffer for
writing).
- Use async postgres_backend throughout safekeeper (and in proxy auth link
part).
- In both safekeeper COPY streams, do read-write from the same thread/task with
select! for easier error handling.
- Tidy up finishing CopyBoth streams in safekeeper sending and receiving WAL
-- join split parts back catching errors from them before returning.
Initially I hoped to do that read-write without split at all, through polling
IO:
https://github.com/neondatabase/neon/pull/3522
However that turned out to be more complicated than I initially expected
due to 1) borrow checking and 2) anon Future types. 1) required Rc<Refcell<...>>
which is Send construct just to satisfy the checker; 2) can be workaround with
transmute. But this is so messy that I decided to leave split.
This patch adds a per-timeline periodic task that executes an eviction
policy. The eviction policy is configurable per tenant.
Two policies exist:
- NoEviction (the default one)
- LayerAccessThreshold
The LayerAccessThreshold policy examines the last access timestamp per
layer in the layer map and evicts the layer if that last access is
further in the past than a configurable threshold value.
This policy kind is evaluated periodically at a configurable period.
It logs a summary statistic at `info!()` or `warn!()` level, depending
on whether any evictions failed.
This feature has no explicit killswitch since it's off by default.
This fixes all kinds of problems related to missing params,
like broken timestamps (due to `integer_datetimes`).
This solution is not ideal, but it will help. Meanwhile,
I'm going to dedicate some time to improving connection machinery.
Note that this **does not** fix problems with passing certain parameters
in a reverse direction, i.e. **from client to compute**. This is a
separate matter and will be dealt with in an upcoming PR.
Downsides are:
* We store all components of the config separately. `Url` stores them inside a single
`String` and a bunch of ints which point to different parts of the URL, which is
probably more efficient.
* It is now impossible to pass arbitrary connection strings to the configuration file,
one has to support all components explicitly. However, we never supported anything
except for `host:port` anyway.
Upsides are:
* This significantly restricts the space of possible connection strings, some of which
may be either invalid or unsupported. E.g. Postgres' connection strings may include
a bunch of parameters as query (e.g. `connect_timeout=`, `options=`). These are nether
validated by the current implementation, nor passed to the postgres client library,
Hence, storing separate fields expresses the intention better.
* The same connection configuration may be represented as a URL in multiple ways
(e.g. either `password=` in the query part or a standard URL password).
Now we have a single canonical way.
* Escaping is provided for `options=`.
Other possibilities considered:
* `newtype` with a `String` inside and some validation on creation.
This is more efficient, but harder to log for two reasons:
* Passwords should never end up in logs, so we have to somehow
* Escaped `options=` are harder to read, especially if URL-encoded,
and we use `options=` a lot.
* etcd-client is not updated, since we plan to replace it with another client and the new version errors with some missing prost library error
* clap had released another major update that requires changing every CLI declaration again, deserves a separate PR
Creates new `pageserver_api` and `safekeeper_api` crates to serve as the
shared dependencies. Should reduce both recompile times and cold compile
times.
Decreases the size of the optimized `neon_local` binary: 380M -> 179M.
No significant changes for anything else (mostly as expected).
Seems a bit silly to have a separate crate just for the executable. It
relies on the control plane for everything it does, and it's the only
user of the control plane.
If the 'basebackup' command failed in the middle of building the tar
archive, the client would not report the error, but would attempt to
to start up postgres with the partial contents of the data directory.
That fails because the control file is missing (it's added to the
archive last, precisly to make sure that you cannot start postgres
from a partial archive). But the client doesn't see the proper error
message that caused the basebackup to fail in the server, which is
confusing.
Two issues conspired to cause that:
1. The tar::Builder object that we use in the pageserver to construct
the tar stream has a Drop handler that automatically writes a valid
end-of-archive marker on drop. Because of that, the resulting tarball
looks complete, even if an error happens while we're building it. The
pageserver does send an ErrorResponse after the seemingly-valid
tarball, but:
2. The client stops reading the Copy stream, as soon as it sees the
tar end-of-archive marker. Therefore, it doesn't read the
ErrorResponse that comes after it.
We have two clients that call 'basebackup', one in `control_plane`
used by the `neon_local` binary, and another one in
`compute_tools`. Both had the same issue.
This PR fixes both issues, even though fixing either one would be
enough to fix the problem at hand. The pageserver now doesn't send the
end-of-archive marker on error, and the client now reads the copy
stream to the end, even if it sees an end-of-archive marker.
Fixes github issue #1715
In the passing, change Basebackup to use generic Write rather than
'dyn'.
workspace_hack is needed to avoid recompilation when different crates
inside the workspace depend on the same packages but with different
features being enabled. Problem occurs when you build crates separately
one by one. So this is irrelevant to our CI setup because there we build
all binaries at once, but it may be relevant for local development.
this also changes cargo's resolver version to 2
Have separate routine and http endpoint to create timeline on safekeepers. It is
not used yet, i.e. timeline is still created implicitly, but we'll change that
once infrastructure for learning which tlis are assigned to which safekeepers
will be ready, preventing accidental creation by compute.
Changes format of safekeeper control file, allowing to store set of
peers. Knowing peers provides a part of foundation for peer
recovery (calculating min horizons like truncate_lsn for WAL truncation and
commit_lsn for sync-safekeepers replacement) and proper membership change;
similarly, we don't yet use it for now.
Employing cf file version bump, extracts tenant_id and timeline_id to top level
where it is more suitable. Also adds a bunch of LSNs there and rename
truncate_lsn to more specific peer_horizon_lsn.
to pass current_timeline_size to compute node
Put standby_status_update fields into ZenithFeedback and send them as one message.
Pass values sizes together with keys in ZenithFeedback message.
We depends on rustls in postgres_backend anyway, so might as well use it
for all TLS stuff. Seems better to depend on only one library both from a
security point of view, and because fewer dependencies means less code to
compile. With this commit, we no longer depend on OpenSSL.
this patch adds support for tenants. This touches mostly pageserver.
Directory layout on disk is changed to contain new layer of indirection.
Now path to particular repository has the following structure: <pageserver workdir>/tenants/<tenant
id>. Tenant id has the same format as timeline id. Tenant id is included in
pageserver commands when needed. Also new commands are available in
pageserver: tenant_list, tenant_create. This is also reflected CLI.
During init default tenant is created and it's id is saved in CLI config,
so following commands can use it without extra options. Tenant id is also included in
compute postgres configuration, so it can be passed via ServerInfo to
safekeeper and in connection string to pageserver.
For more info see docs/multitenancy.md.
