mirror of
https://github.com/stablyai/orca.git
synced 2026-11-19 04:23:57 +00:00
249faa46c331fe32df8768941dbf2207b2fbb866
10
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
|
|
1eaaf85e9f |
Land the WSL project mover dark (merges only after verify-15b, the flag-off audit and green CI) (#34059)
* test(orcad-migration): pin the SSH manifest through the real dormant collectors Co-Authored-By: Claude <noreply@anthropic.com> * refactor(orcad-migration): read the dormant-state export through a source-kind scope A local-WSL scope lives on host local and owns only its projects, so host-wide matches stay an SSH whole-host rule. SSH bytes are pinned by the collector golden. Co-Authored-By: Claude <noreply@anthropic.com> * feat(wsl-mover): export a local WSL move's signed manifest with its dormant state (D1b-3c) Collects the scoped projects, their groups and every dormant-state kind through the local-WSL export scope, rewrites UNC paths to the distro's, and returns blockers for anything the collectors can't carry instead of dropping it. Automations move disabled, as the wire requires, and come back as a list to re-enable on the host after commit. Co-Authored-By: Claude <noreply@anthropic.com> * fix(wsl-mover): reset an interrupted move to zero, or finish it once the host proves a commit Co-Authored-By: Claude <noreply@anthropic.com> * fix(wsl-mover): abort a move by its identity when its manifest is too large for a request Co-Authored-By: Claude <noreply@anthropic.com> * fix(wsl-mover): cap a new move's manifest below the request limit, and move forward on a by-reference commit only once the host flushed it Co-Authored-By: Claude <noreply@anthropic.com> * fix(wsl-mover): remove only the newest move of a distro, so its chain stays readable Co-Authored-By: Claude <noreply@anthropic.com> * feat(runtime): clients read a migrated pane's scrollback from its host (D1b-6d-1) * fix(runtime): hold a remote pane only when its host is known to serve scrollback, and never read bytes in render (D1b-6d-1) * fix(runtime): route the scrollback read by the tab's own host, never the focused one (D1b-6d-1) * fix(runtime): resolve the scrollback host through resolveOwner and use the shared RPC error check, after main moved both (D1b-6d-1) * feat(wsl-mover): a moved project's existing chats stay listed and resumable on this computer (D1b-7a) * fix(wsl-mover): moved-project chats go through the layout owner instead of writing layout directly (D1b-7a) * test(wsl-mover): run the moved-project chat runtime test in the Node runtime (D1b-7a) * test(wsl-mover): read the hidden local row through main's per-host hidden-repo API (D1b-7a) * feat(wsl-mover): rewrite the desktop's routing and seed the host's session after a move (D1b-7c) Registers the main-side desktop rewrite stores ui-routing, session-globals and host-session-seed. Adds a +2 main layout-writer baseline line for wsl-move-main-rewrite-stores.ts: these are one-shot, ledgered move rewrites, and no LayoutCommand can set focus or seed a runtime host's partition. * fix(wsl-mover): finish the main rewrite before the window loads, keep one copy of each moved tab, and copy instead of move (D1b-7c) * feat(wsl-move): rewrite renderer stores for moved projects and keep their UI through catalog prunes (D1b-7d) Registers the renderer-side desktop rewrite stores quick-open-history, file-view-preferences and notebook-environments. The renderer copies each moved workspace's entry to its WSL host key, marks it applied in the same storage, and records the ledger entry; main requests a storage flush first and accepts only the main window. Committed moves are re-listed for re-application at every startup. Catalog prunes keep filters, hook trust and setup-script dismissals of moved repos. * fix(wsl-move): import the migration manifest types from main's orcad-migration folder (D1b-7d) * fix(wsl-move): import wslUncPathToLinux from shared wsl-paths in the manifest exporter, where 7d moved it (D1b-7d) * feat(wsl-mover): rewrite a moved project's orchestration history on the desktop (D1b-7e) Settled local worker dispatches and their worker-terminal rows in a moved project take the WSL host's worktree id, in one ledgered, idempotent store. Chat workers, live rows, federated attachments and JSON receipts stay as written; automations keep their unchanged local copy (the scheduler only advances it). Per-table dispositions for orchestration.db. Co-Authored-By: Claude <noreply@anthropic.com> * fix(wsl-mover): hold the orchestration store while a worker in scope is live; skip federated rows (D1b-7e review) Co-Authored-By: Claude <noreply@anthropic.com> * feat(wsl-mover): copy in-app browser logins into the WSL host on a move (D1b-7f) A committed WSL move now copies each in-app browser profile's cookies once into the WSL host's stable route partition (owner decision 3a), merging without overwriting what the host jar holds and never touching the source. Where that is infeasible (no deployment link so no stable partition, the destination is not a WSL host or is gone, or the partition name is held by another identity) the host starts fresh and the move journal records why (3b). Registered as the ledgered browser-cookies rewrite store; it runs only once browser sessions and an app window exist. WSL_MOVE_DESKTOP_REWRITE_REGISTRY_COMPLETE stays false. * feat(wsl-mover): retain moved source rows, reconcile them on start, and plan delta moves (D1b-8) * fix(wsl-mover): keep the retained mark out of the WSL move manifest (D1b-8) * feat(wsl-mover): the move driver runs a WSL move end to end, with production gate facts and journaled restore folders One entry point (and preview/start/cancel/listUnfinished IPC for D1b-9) plans the move, gates terminals on the hook server's agent status, the close-tab process probe, running automation runs and live dispatches, pauses and proves exit, stages, sends blobs, commits only from blobs-transferred (#29825), and finishes on the desktop. Any failure resets to zero or goes forward when the host committed. Restore folders and the automations to turn back on are kept in the journal; the host turns those automations back on after commit, retried until it confirms. A real-PTY test pauses daemon shells, and runs on a real distro in the WSL orcad lane. * feat(wsl-mover): move dialog with preview, blockers, progress and result behind the internal WSL hosts gate (D1b-9) * fix(wsl-mover): move dialog hides instead of blocking, follows runs after a reload, and lets a start settle an unfinished move (D1b-9 review) * fix(wsl-mover): word an unfinished earlier move as still finishing (D1b-9) * test(wsl-mover): type the e2e's fake move state instead of reading it through Reflect (D1b-9) * WIP(wsl-mover): 7f-2 registry complete, coverage proof, startup re-apply (D1b-7f-2) * test(wsl-mover): registry-complete lifecycle, stale-focus restart, unload re-apply (D1b-7f-2) * fix(wsl-mover): share the session focus write so the re-apply adds no layout writer (D1b-7f-2) * fix(wsl-mover): redo additive rewrites once at a stale window's unload; behavioural coverage proof (D1b-7f-2 review) * test(wsl-mover): the IPC record test now finishes the rewrite with the registry complete (D1b-7f-2) * fix(wsl-mover): fence worktree-less spawns by cwd and re-prove terminal exit before commit (R46, WIP) * test(wsl-mover): pin the commit re-proof, browser jar identity and repeated move generations (R45, R46, R47) * fix(wsl-mover): fence any spawn by its folder and name the re-proof's reason (R46 review) * fix(wsl-mover): a terminal in a known folder outside the move never blocks it (R46 follow-up) * test(wsl-mover): kill the real move driver at every point against a real host store; abort a reset move's leftover stage on reconnect Co-Authored-By: Claude <noreply@anthropic.com> * fix(wsl-mover): carry unsaved drafts into the moved project; round-trip every fixture through the real export, driver and host import Co-Authored-By: Claude <noreply@anthropic.com> * fix(wsl-mover): reset a move waiting on a distro that is proven unregistered; test updates mid-move (R41), lost distros (R38) and two desktops (R39) Co-Authored-By: Claude <noreply@anthropic.com> * test(wsl-mover): list the D1b-10 real-SQLite mover tests Co-Authored-By: Claude <noreply@anthropic.com> * test(wsl-mover): type the fault test's journal hook without a cast Co-Authored-By: Claude <noreply@anthropic.com> * fix(wsl-mover): reset for a lost distro even when its kept host fails to connect, never for a renamed one; compare filled-in repo keys only where the source lacked them Co-Authored-By: Claude <noreply@anthropic.com> * fix(wsl-mover): carry markdown frontmatter visibility and closed-terminal-tab tombstones into the moved project Co-Authored-By: Claude <noreply@anthropic.com> * test(wsl-mover): read the persisted stage through a typed record, not Reflect Co-Authored-By: Claude <noreply@anthropic.com> * feat(telemetry): report how WSL moves end, by phase and reason code (R43) Co-Authored-By: Claude <noreply@anthropic.com> * fix(telemetry): report a pause refusal's reason, an outcome for a thrown run, and only real transport errors as unreachable Co-Authored-By: Claude <noreply@anthropic.com> * fix(agent-hooks): a WSL host's orcad never removes the hook entries the WSL bridge shares (R42) Co-Authored-By: Claude <noreply@anthropic.com> * fix(agent-hooks): a WSL host's Codex account-home launch with hooks off skips too; mark the R42 guard to drop with the bridge Co-Authored-By: Claude <noreply@anthropic.com> * feat(wsl-mover): "Use on this computer again" brings a moved project back as it was before the move Co-Authored-By: Claude <noreply@anthropic.com> * fix(wsl-mover): judge a bridge WSL pane's foreground inside its distro On Windows every live bridge pane's own process is wsl.exe, so the busy-terminal gate read every open WSL terminal as running a program and refused the move. Read the pane's terminal foreground process group inside the distro (processes carry ORCA_PANE_KEY): only shells means idle, anything else blocks, and an unreadable guest stays unverifiable. Co-Authored-By: Claude <noreply@anthropic.com> * fix(wsl-mover): only the selected projects' session rows can refuse a WSL move The session eligibility check treated host local's whole partition as the move's, as the SSH conversion does. So an agent session or unsaved draft in any other project on this desktop, or in a project an earlier move retained, refused every later WSL move from that distro. Co-Authored-By: Claude <noreply@anthropic.com> * fix(wsl-mover): sign the manifest as the journal and the host read it The digest was computed over in-memory rows. A value with toJSON (a Date on a row added this session) canonicalized to {} when signing but to its string once written to the journal or sent to the host, so the first move after adding a project reset with orcad_migration_manifest_digest_mismatch until a restart reloaded the row. Normalize through JSON before signing. Co-Authored-By: Claude <noreply@anthropic.com> * fix(wsl-mover): carry a slept pane's scrollback from its daemon checkpoint The move sleeps every pane first, and a slept pane's history lives only in the daemon's checkpoint, never in a renderer snapshot. The export carried renderer snapshots only, so moved terminals opened empty. After Sleep the driver reads each paused pane's checkpoint (as cold restore would replay it) and the export carries it under the pane's own snapshot ref; the snapshot channel serves those bytes, checked against the signed hash. SSH conversions pass no reader and are unchanged. Co-Authored-By: Claude <noreply@anthropic.com> * fix(wsl-mover): say why when a move can't be prepared, instead of a bare reset An export or journal failure after the pause (a digest mismatch, on awin) was rethrown and shown as "everything was put back" with no reason. Nothing is journaled yet at that point, so refuse with the error named instead. Co-Authored-By: Claude <noreply@anthropic.com> * fix(wsl-mover): retry a renderer store main refused to record The renderer applied a store and wrote its marker, but ignored a refused ledger record (gated-off, failed, not-main-window), so a committed move stayed unfinished and refused every later move of the distro until the next app start. Log the reason and retry with backoff until it lands. Co-Authored-By: Claude <noreply@anthropic.com> * fix(wsl-mover): a WSL pane is idle only when its shell has nothing else Review of #32343: reading only the terminal's foreground group let background jobs, nohup and disowned work, setsid daemons and a script waiting at read pass as idle, and the move's Sleep would end them. Scan the pane shell's subtree, its session and every process carrying its key; any non-shell process, or a shell running a script, blocks. Co-Authored-By: Claude <noreply@anthropic.com> * fix(wsl-mover): never leave behind an agent whose key may be the selected project Review of #32343: scoping the session check to the selected projects let an unqualified key for a repo id another host also registers fall out of both the transfer and the refusal. Such a key now refuses. Adds tests that fail on the old code: another project's live agent with its tab open and its draft don't refuse, the same kinds of state in the selected project still do. Co-Authored-By: Claude <noreply@anthropic.com> * fix(wsl-mover): refuse an unreadable slept checkpoint, prefer it, and spool it to disk Review of #32343: - A checkpoint behind an unreadable log (or an unreadable one) refuses with the pane named instead of carrying stale history. - For a pane the move just slept the checkpoint is the newest copy, so it wins over an older renderer buffer or snapshot. - Buffers spool to a per-move folder and only their hashes and sizes stay in memory; the snapshot channel reads them by offset. The folder is removed whatever the outcome. - A journal write that landed before it threw is reset, so no orphan record blocks the next move. awin's checkpoints were 310-615 KB, well inside the 5 MB per-pane cap, so nothing there is trimmed. Co-Authored-By: Claude <noreply@anthropic.com> * fix(wsl-mover): retry a failed listing, never a record another window was refused Review of #32343: not-main-window can't clear by waiting, while a listing failure is transient. Co-Authored-By: Claude <noreply@anthropic.com> * fix(wsl-mover): sign the manifest as the host parses it The likelier cause of awin's digest mismatch: the signature covered the exported objects, but the manifest parser keeps only the fields it knows, so a session field it drops (one a sleep can write) left the journal and the host hashing something else. Sign the parsed form, and warn when the parser dropped anything, since such a field does not move. Co-Authored-By: Claude <noreply@anthropic.com> * chore(wsl-mover): split the journal step out of the driver, and format The review fixes took wsl-move-driver.ts past the line limit; the export-and-journal step moves to its own module unchanged. Co-Authored-By: Claude <noreply@anthropic.com> * fix(wsl-mover): a slept pane passes the busy check; say what each move dropped or lacked Re-run on awin ( |
||
|
|
0efc842028 |
[comment audit] Shorten preload comments (#32257)
* chore: audit preload root comments and track repository coverage * docs: track repository comment audit coverage * chore: keep comment audit tracker local * chore: shorten preload API contract comments --------- Co-authored-by: OrcaWin <293788423+OrcaWin@users.noreply.github.com> |
||
|
|
d31f37c2dd |
chore(session): delete three session paths nothing calls any more (#28152)
* chore(session): delete three session paths nothing calls any more - session:set-sync IPC (bridge, type member, web adapter stub); quit uses app:stage-before-unload-sync - the session-write persist gate (shouldSchedulePersist / subscribeToPersistGateOpen); the one production subscriber passes neither - reconcileDeadSessions and the binding's reconcileIfSessionDead; the live reconcileIfSessionMissing path stays Tests that drove these are retargeted to the live paths or removed. * chore(session): name shouldPersistWorkspaceSession in the deferral comment |
||
|
|
0024735e82 |
fix(ssh): remove the relay-only remote workspace sync so reconnect never sticks on pulling (#27409)
* fix(ssh): remove the relay-only remote workspace sync so reconnect never sticks on pulling * refactor(ssh): drop snapshot apply tokens and terminal finalization only the sync used * test: drop leftover sync-status mock --------- Co-authored-by: m4air <m4air@Mac.localdomain> |
||
|
|
6c4625d7ff |
fix(terminal): main records every tab close, and seeding reads the records (#22955)
* fix(terminal): every explicit terminal close commits through one main transaction
A renderer save cannot shrink terminal membership once main owns a repo's
topology, so desktop tab and pane closes, CLI split-pane closes and mobile
split-pane closes only became durable when the killed process's exit retired
the surface. A close whose kill failed or threw, or whose exit was never
certified, came back after a reload.
Every close now reaches closeTerminalSurface: the renderer sends an explicit
intent for user and cleanup closes, the CLI and mobile split-pane closes commit
the pane after their stop, and the headless and relayed mobile closes reuse the
same commit. A failed flush keeps the in-memory removal and no longer cancels
the kill. Exit retirement is unchanged.
* fix(terminal): tell the desktop renderer to drop a split pane main closed
A CLI or mobile close of one pane in a split commits the pane in main, but the
desktop kept showing it until reload when no exit arrived to remove it. The
close now sends a leaf-addressed notice: a mounted pane closes by leaf id, and
a parked tab collapses its stored layout. Addressing by leaf makes the notice
and the renderer's exit handling no-ops after each other, which replaces the
numeric pane-id notice that could close the whole tab when the exit won.
* fix(terminal): a pane close never widens into a whole-tab close
A leaf-addressed close fell through to the whole-tab close whenever main's layout no longer
held that leaf as one of several. Main's exit handling retires an exited split pane from the
saved layout, so closing that pane afterwards (the exited-pane overlay's Close, or a CLI close
whose stop delivers the exit first) removed the whole tab, live sibling included, and the
next renderer save could not restore it. A pane close is now a no-op unless its leaf is in a
multi-pane layout.
Also updates two mobile split-close assertions to expect the leaf-addressed notice, and adds a
test that a relayed mobile close of a renderer-listed tab still reaches the renderer's pin guard.
* test(terminal): cover the PTY-handle branch of a CLI split-pane close
The existing CLI split test resolves its handle through the renderer graph, so the branch
that closes a runtime-owned pane by its PTY handle had no test failing without its commit.
* fix(terminal): main records every terminal tab close, and seeding reads the records
* test(terminal): pin the renderer close mirror against an early SSH pull, and main's record writes against later saves
* fix(terminal): a CLI pane close with an unconfirmed stop closes only that pane
`orca terminal close <handle>` on one pane of a split used to close the
whole tab, live sibling included, whenever that pane's stop could not be
confirmed (for example an unreachable SSH host). An unconfirmed stop is
unverifiable, not a reason to drop siblings: the close now commits only
that leaf, tells the renderer to drop that leaf, and leaves the owed kill
to the controller's existing SSH pending-kill path.
On a host where no renderer lists the tab, main now also removes the
closed pane from the paired-client snapshot (with its retirement proof),
since no exit may arrive to do it.
* docs(terminal): correct the pull merge's record-safety comment
The mirror is written by closeTab before main commits, so the claim that only a
main-committed close writes a record was inaccurate; also reflow a split comment.
* refactor(terminal): one resolver decides whether a pane close becomes a tab close
Every explicit close now states its target as `{kind:'tab'}` or `{kind:'pane', leafId}`; no
optional leaf id silently means the whole tab. Main resolves a close it started in exactly one
place, reading the copy of the tab's panes its layout owner holds (the renderer-published layout
for tabs the desktop renderer lists, main's session layout otherwise). Only `last-pane` escalates,
through the existing tab path so the renderer's pin guard still runs; an unknown pane never widens.
- The CLI and phone paths drop their per-site sibling counts for the resolver.
- The notifier splits into a tab-only close and a leaf-addressed pane close.
- The headless tab closer takes a parent tab id, so a pane row cannot reach it.
- A phone close of one pane on a host with no desktop window now stops and closes only that pane.
- A phone close of one pane with no live process record closes that pane, not its tab.
* fix(cli): an unverifiable stop says the close happened
`orca terminal close` still exits 1 when the process stop cannot be verified, but its message now
says the terminal was closed and names the host's reason, instead of "close failed". It promises
that the kill retries on reconnect only when the SSH relay itself never answered the stop, the one
case a recorded kill order backs.
* fix(terminal): a phone pane close commits even when its kill fails
A paired client's close of one pane threw `terminal_close_failed` before committing anything when
the controller reported the kill failed, so the pane stayed. The kill is now best-effort, as it is
for a whole-tab close: the pane's removal always commits and the failure stays on the PTY's
liveness verdict.
* fix(terminal): a pane close widens only when a copy shows it is the last pane
The close resolver read an owner copy that records no panes as "the tab has
one pane", so a CLI close of one pane of a split, addressed while the
renderer listed the tab before publishing its panes, closed the whole tab.
Every copy now counts only if it records at least one pane, read in the
owner's order with the published rows as the last fallback, and a pane
close widens only when a copy lists that pane as the tab's only one. An
unsplit tab whose saved layout predates its pane still closes: its
published row names the pane.
* fix(cli): promise a kill retry only when the host recorded the kill
The close receipt inferred "the kill retries when the host reconnects" from
the stop reason's text, which a new transport message or a reworded error
would silently break.
An explicit close now records the replayable kill order when its stop goes
unconfirmed, before sending the follow-up kill (whose own failure is
recorded only once its RPC settles), and reports that on the receipt as an
optional `pendingKillRecorded`. The CLI promises the retry only from that
field, so an older host, which never sends it, gets no promise.
* test(pty): justify the controller cast the recorded-stop tests extend
* fix(terminal): parse the close target with typed narrowing
The low-evidence lint gate rejects Reflect.get and broad object parameters,
which failed static analysis. Narrow with 'in' checks instead and cover the
boundary parser's accept and reject cases.
* test(terminal): drive the close-record tests through the durable store
* fix(terminal): a desktop tab close is not refused by a split that bound while it waited
The renderer has already removed and killed a tab it closes, so its close intent now skips the
owner fence phone and CLI closes use. Before, a split pane whose binding was admitted between the
close request and its durable write made main refuse the close, and the tab came back on the next
launch whenever its processes did not exit.
* chore(terminal): note that closedByLayoutOwner goes away once main owns the terminal layout
* chore: take the base branch's lockfile, which a merge had reverted
* test(terminal): reload the close-intent fixture through the SQLite profile store
Main now requires a SQLite profile-state authority for a writable Store, so the save-and-reload
close tests build and reopen their store through the shared SQLite test harness.
* docs(terminal): state the close-record rule in the merge's active-workspace comment
* fix(terminal): the first close of a tab keeps its record, and every lookup honours the TTL
* test(terminal): give the relay reattach close record a recent close time
* fix(terminal): a close that removes a listed tab records itself; only an echo is skipped
The echo of a close main already made never finds the tab listed, and the close transaction already skips it when a live record exists. The record helper kept the first record as well, which only ever applied to a close that did remove a listed tab, and there it kept a stale reason and TTL.
|
||
|
|
993183afd7 |
fix(terminal): every explicit terminal close commits through one main transaction (#22929)
* fix(terminal): every explicit terminal close commits through one main transaction
A renderer save cannot shrink terminal membership once main owns a repo's
topology, so desktop tab and pane closes, CLI split-pane closes and mobile
split-pane closes only became durable when the killed process's exit retired
the surface. A close whose kill failed or threw, or whose exit was never
certified, came back after a reload.
Every close now reaches closeTerminalSurface: the renderer sends an explicit
intent for user and cleanup closes, the CLI and mobile split-pane closes commit
the pane after their stop, and the headless and relayed mobile closes reuse the
same commit. A failed flush keeps the in-memory removal and no longer cancels
the kill. Exit retirement is unchanged.
* fix(terminal): tell the desktop renderer to drop a split pane main closed
A CLI or mobile close of one pane in a split commits the pane in main, but the
desktop kept showing it until reload when no exit arrived to remove it. The
close now sends a leaf-addressed notice: a mounted pane closes by leaf id, and
a parked tab collapses its stored layout. Addressing by leaf makes the notice
and the renderer's exit handling no-ops after each other, which replaces the
numeric pane-id notice that could close the whole tab when the exit won.
* fix(terminal): a pane close never widens into a whole-tab close
A leaf-addressed close fell through to the whole-tab close whenever main's layout no longer
held that leaf as one of several. Main's exit handling retires an exited split pane from the
saved layout, so closing that pane afterwards (the exited-pane overlay's Close, or a CLI close
whose stop delivers the exit first) removed the whole tab, live sibling included, and the
next renderer save could not restore it. A pane close is now a no-op unless its leaf is in a
multi-pane layout.
Also updates two mobile split-close assertions to expect the leaf-addressed notice, and adds a
test that a relayed mobile close of a renderer-listed tab still reaches the renderer's pin guard.
* test(terminal): cover the PTY-handle branch of a CLI split-pane close
The existing CLI split test resolves its handle through the renderer graph, so the branch
that closes a runtime-owned pane by its PTY handle had no test failing without its commit.
* fix(terminal): a CLI pane close with an unconfirmed stop closes only that pane
`orca terminal close <handle>` on one pane of a split used to close the
whole tab, live sibling included, whenever that pane's stop could not be
confirmed (for example an unreachable SSH host). An unconfirmed stop is
unverifiable, not a reason to drop siblings: the close now commits only
that leaf, tells the renderer to drop that leaf, and leaves the owed kill
to the controller's existing SSH pending-kill path.
On a host where no renderer lists the tab, main now also removes the
closed pane from the paired-client snapshot (with its retirement proof),
since no exit may arrive to do it.
* refactor(terminal): one resolver decides whether a pane close becomes a tab close
Every explicit close now states its target as `{kind:'tab'}` or `{kind:'pane', leafId}`; no
optional leaf id silently means the whole tab. Main resolves a close it started in exactly one
place, reading the copy of the tab's panes its layout owner holds (the renderer-published layout
for tabs the desktop renderer lists, main's session layout otherwise). Only `last-pane` escalates,
through the existing tab path so the renderer's pin guard still runs; an unknown pane never widens.
- The CLI and phone paths drop their per-site sibling counts for the resolver.
- The notifier splits into a tab-only close and a leaf-addressed pane close.
- The headless tab closer takes a parent tab id, so a pane row cannot reach it.
- A phone close of one pane on a host with no desktop window now stops and closes only that pane.
- A phone close of one pane with no live process record closes that pane, not its tab.
* fix(cli): an unverifiable stop says the close happened
`orca terminal close` still exits 1 when the process stop cannot be verified, but its message now
says the terminal was closed and names the host's reason, instead of "close failed". It promises
that the kill retries on reconnect only when the SSH relay itself never answered the stop, the one
case a recorded kill order backs.
* fix(terminal): a phone pane close commits even when its kill fails
A paired client's close of one pane threw `terminal_close_failed` before committing anything when
the controller reported the kill failed, so the pane stayed. The kill is now best-effort, as it is
for a whole-tab close: the pane's removal always commits and the failure stays on the PTY's
liveness verdict.
* fix(terminal): a pane close widens only when a copy shows it is the last pane
The close resolver read an owner copy that records no panes as "the tab has
one pane", so a CLI close of one pane of a split, addressed while the
renderer listed the tab before publishing its panes, closed the whole tab.
Every copy now counts only if it records at least one pane, read in the
owner's order with the published rows as the last fallback, and a pane
close widens only when a copy lists that pane as the tab's only one. An
unsplit tab whose saved layout predates its pane still closes: its
published row names the pane.
* fix(cli): promise a kill retry only when the host recorded the kill
The close receipt inferred "the kill retries when the host reconnects" from
the stop reason's text, which a new transport message or a reworded error
would silently break.
An explicit close now records the replayable kill order when its stop goes
unconfirmed, before sending the follow-up kill (whose own failure is
recorded only once its RPC settles), and reports that on the receipt as an
optional `pendingKillRecorded`. The CLI promises the retry only from that
field, so an older host, which never sends it, gets no promise.
* test(pty): justify the controller cast the recorded-stop tests extend
* fix(terminal): parse the close target with typed narrowing
The low-evidence lint gate rejects Reflect.get and broad object parameters,
which failed static analysis. Narrow with 'in' checks instead and cover the
boundary parser's accept and reject cases.
* fix(terminal): a desktop tab close is not refused by a split that bound while it waited
The renderer has already removed and killed a tab it closes, so its close intent now skips the
owner fence phone and CLI closes use. Before, a split pane whose binding was admitted between the
close request and its durable write made main refuse the close, and the tab came back on the next
launch whenever its processes did not exit.
* chore(terminal): note that closedByLayoutOwner goes away once main owns the terminal layout
* test(terminal): reload the close-intent fixture through the SQLite profile store
Main now requires a SQLite profile-state authority for a writable Store, so the save-and-reload
close tests build and reopen their store through the shared SQLite test harness.
|
||
|
|
0e3b71f605 |
fix(session): give an SSH workspace one owning partition so its tabs stop round-tripping as deletions (#19572)
* fix(session): give an SSH workspace one owning partition so its tabs stop round-tripping as deletions `workspaceSessionPartitionHostId` answered differently depending on who asked: the renderer mapped an SSH worktree's session to the `local` blob, the main-process runtime read-modify-wrote `ssh:<targetId>`. One workspace's session lived in two stores and no reader reunited them, so whatever landed on the unread side did not read as unknown — it round-tripped as absence. The remote-workspace upload is a `replace-session` patch, which turned that absence into deletion on the host, and the next pull applied the deletion locally and re-poisoned the snapshot. Collapse the two answers into one: every non-'local' host owns its partition. Boot hydration and the export fallback now read the SSH partition, and rows a shipping build left in `local` are folded back in once, gap-filling only — an empty tab row is a gap, never proof that anything was closed. Folder workspaces deliberately keep their existing 'local' routing: boot discovers SSH partitions from the repo catalog, so an SSH target that owns only a folder workspace has no partition any reader enumerates. They are still adopted back out of an SSH partition when a repo does name the host. Fixes #12721 Supersedes #12722 Co-authored-by: Robert Nisipeanu <github@nisipeanu.com> Co-authored-by: Jinwoo-H <Jinwoo-H@users.noreply.github.com> * test(session): pin the old-client empty-publish skew direction * fix(session): adopt every workspace the host partition names, not only tabbed ones Review caught that gating adoption on `host.tabsByWorktree[key].length > 0` traded the #12721 deletion for a narrower one. The write path routes EVERY worktree-scoped field to the owning partition, so an SSH workspace with open editor files or browser tabs and no terminals had all of it dropped on every restart — and unlike terminal state it cannot be recovered from the host snapshot, which carries terminal fields only, so an unsaved `dirtyDraftContent` was destroyed outright. The defect was not a missing field. It was a hand-maintained field list deciding what the read recovers while the write used the ownership table, so the two could disagree. Adoption now walks `WORKSPACE_SESSION_FIELD_OWNERSHIP` with an exhaustive switch, and a new ownership kind is a compile-time decision rather than a silent omission. Session keys are normalized through the shared `normalizeWorkspaceSessionKeyToWorkspaceId` so host-qualified visit recency (`ssh:target|worktreeId`) reaches its workspace, and the regression is pinned by feeding the shipping split's own output back through the real boot read rather than a hand-built fixture. Co-authored-by: Robert Nisipeanu <github@nisipeanu.com> Co-authored-by: Jinwoo-H <Jinwoo-H@users.noreply.github.com> * fix(session): stop adoption overwriting rows it was never told about Three losses, one cause: the reader walks its own description of the partition layout while the writer walks another, so the two agree on which ownership kinds exist and not on what a kind means. - An empty host row replaced a populated base row, destroying an unsaved dirtyDraftContent the header comment says must never be destroyed. The host holding nothing is not evidence the base is wrong. - A contested bare id was adopted as if local and ssh:<target> were one workspace written twice, which is exactly the id where that premise is false. The read already reached that verdict and adoption could not ask for it, so it is passed in; contested keys are gap-filled, never replaced. mergeWorkspaceSessionsWithHostShadow now reports the real contested set, which primaryHostBySessionKey never was. - Tab-, pane- and file-keyed rows are adopted through the split's own indexes, so unified-only tabs come back and the pane key is parsed once. - A bare lastVisitedAtByWorktreeId key only fills a gap; the split has a dedicated branch for that field and the reader had none. * test(session): pin the tombstone/gap boundary the two readings meet at An explicit empty tabsByWorktree row means the user closed the last terminal; adoption reads an empty base row as a gap to fill. Same value, opposite readings, so the boundary is asserted rather than argued: the tombstone lands in the owning partition, restores as a present empty row rather than a deleted key, is declined by the real seeding predicate, is published as an empty list, and the legacy-transition resurrection happens once and cannot recur. * docs(reliability): record the adoption guards and the tombstone boundary in the gate * test(e2e): read the SSH restart assertions from the partition that owns them ssh-cold-activation-restore asserted persistence through session.get() with no host, which is the local partition an SSH worktree's rows no longer live in. The invariant it means to check is that the state is persisted where the boot read will find it, so it now unions local and ssh:<targetId> and stays correct on both layouts. Confirmed the product invariant separately rather than by the edit: the behavioural half of both tests - the full app restart, the active worktree, the eager terminal remount and the PTY-owner reclaim against a real Docker OpenSSH host - runs after this check and passes. 2 passed in 48.9s. * test(e2e): read ssh-restart-tab-accumulation from the owning partition too Same layout-coupled read as ssh-cold-activation-restore: the pre-quit flush asserted through session.get() with no host. Verified against a real Docker OpenSSH target - both repeated quit/relaunch cycles keep exactly the restored SSH tabs, no accumulation and no loss. 2 passed in 52.9s. * fix(lint): clear the casting gate on the partition adoption main tightened typescript/consistent-type-assertions to assertionStyle: never, which the rebase brings onto these added lines. Most of the round-trip fixtures did not need a cast at all -- three were hiding wrong-shaped literals (a browser workspace keyed 'name', a unified tab keyed 'type', a layout keyed 'direction'), now written as the types they stand for. The adoption reads narrow through an isRecord predicate instead of casting, which also stops a null entry throwing out of Object.keys. What is left is dynamic-field writes and unknown-typed IPC returns, each with its own SAFETY rationale. * fix(session): give an SSH folder workspace one owning partition boot can find The partition owner rule already names `ssh:<targetId>` for a repo-backed worktree, but `getFolderWorkspacePartitionHostId` still answered 'local' for a folder workspace while main's `RuntimeWorkspaceSessionController.getPreferredHostId` answered `ssh:<targetId>` for the same key. That is #12723 unfixed for folder workspaces, and once the renderer started writing `ssh:*` at all it got worse: a save's field-level patch carries only the rows routed to that partition, so a `tabsByWorktree` write without the folder row erased the row main had put there. The reason the renderer could not route there was real - boot discovered SSH partitions from the repo catalog, which cannot name a target whose only workspace is a folder. So persistence now answers that directly over `session:list-host-ids`, and boot reads the partitions that exist rather than the ones a catalog implies. Removing a folder workspace prunes its rows from the owning partition too, or the census would adopt them back on the next launch as a workspace the user already deleted. Adoption now decides from the repo catalog instead of from co-presence. Two partitions holding one bare `repoId::path` is not evidence of a collision - that is the exact shape the repair exists for - so the verdict comes from `resolveWorktreeExecutionHost`: a repo id registered on more than one host is contested and may only be gap-filled, and one the catalog positively resolves to a different host is residue this partition does not own and is not adopted at all. Without the second rule a stale partition sorting first won the read and was then written into the live one. Nothing is deleted either way; the rows stay where they are. Finally, a workspace adopted out of a partition now routes back to that partition. Routing used to re-derive an owner from the catalog, so a boot whose repos had not hydrated moved the rows it had just reunited back into 'local' and re-stranded them. Contested ids are withheld from that override, because routing the whole bare id to one host is the loss the gap-fill prevents. The publish path resolves each workspace's owner once for the whole publish, shared with the projection, so the per-target catalog attribution does not repeat it per connected host. * fix(session): drop a deleted workspace from every partition, not just the local blob Adversarial review of the previous commit found three ways the partition census - which now reads whatever persistence holds rather than what the repo catalog implies - keeps rows alive that nothing should keep alive. `deleteProjectGroup` pruned only the local blob, so every folder workspace under a deleted group left its rows in `ssh:<targetId>`; the next boot adopted them back, named that partition their owner and wrote them there again, forever. `removeFolderWorkspace` had the same hole for a workspace whose partition its host expression could not name: main never persists a folder workspace's `executionHostId`, and `RuntimeWorkspaceSessionController` can infer a connection from the group's repos that the workspace row itself does not carry. Deriving the partition at delete time is the wrong question - a deleted workspace owns nothing anywhere - so both paths now remove it from every partition. The third is on the read side. A contested id is deliberately withheld from the read-source override so the write cannot carry one host's rows into another's partition, but the routing that then re-derives an owner answers 'local' for an id the catalog cannot name. Adopting such a row moved it out of the partition that owns it and into the blob: the two-store split this change exists to remove. A contested id the assembled session holds no row for is therefore not adopted at all. Gap-filling stays available for a contested id the session already names, since that row's own partition is what the write follows. Declining to adopt leaves a row invisible for one boot; it never deletes one. Also: the folder-key guard in both catalog attributions was dead, because `getRepoIdFromWorktreeId` hands back the whole key rather than nothing when there is no `::`. The verdict was right and the resolution wasted; it now skips by shape. And the two type assertions the changed-code casting gate rejected are gone rather than suppressed. * fix(session): park the rows a partition read declines instead of letting the next write erase them A partition write replaces each field with exactly what the unified session routed there. So a row the read left out of that session is erased from its own partition the moment any sibling workspace writes the same one - and with SSH partitions now the owning store, that row is then in no partition at all. Three separate decisions produce such rows: residue the catalog attributes to another host, a contested id withheld so the write cannot carry one host's rows into another's partition, and a workspace the base already holds the live copy of. Declining to show a row was quietly deleting it. The machinery for this already exists. `attachHostSessionShadow` writes a contested runtime co-claimant's parked rows straight back into its own slice before the write, so the primary's write cannot erase them; the ssh partitions simply were not among the slices the contention split arbitrates. The read now parks everything it is not returning to an ssh partition into that same shadow, and the existing re-attach puts it back. Leak, never kill - docs/reference/ssh-execution- boundary.md - and a row no partition holds is unrecoverable. Second, the contested branch of the tab adoption read `Object.hasOwn` as "the base has tabs here". An empty list satisfies it, so whenever a legacy id happened to be contested, #12721's empty local row won over the host's real one - the exact reading the module's own header, and the gate invariant it is pinned by, say is wrong. An empty row is the gap this repair fills, so it is now treated as one. * test(session): pin the empty-base-row gap for a contested id Mutation testing found the assertion missing: reverting the gate to `Object.hasOwn` left all 39 assertions passing, which makes the fix that reads an empty base tab row as a gap unguarded. The #12721 shape does not stop being a gap because the id happens to be contested. --------- Co-authored-by: Robert Nisipeanu <github@nisipeanu.com> Co-authored-by: Jinwoo-H <Jinwoo-H@users.noreply.github.com> |
||
|
|
fbe94ceff6 |
fix: close readiness gaps found by merged-change audit (#17159)
* fix(ssh): fence stale kills and retired pane replay * fix(ssh): support cancellable interactive authentication * fix(ssh): await remote catalog before snapshot adoption * fix(pty): contain Windows ConPTY input failures * fix(power): avoid redundant macOS display blocking * perf(editor): narrow markdown override subscriptions * fix(quick-open): close directory handles after reads * refactor(linux): remove unused proc socket scanner * fix(usage): apply flat Sonnet 4.6 pricing * ci: prime Node next native test cache * docs(skills): resolve snapshot cleanup data path * fix(ssh): recover install locks after host reboot * test(ssh): recognize boot-aware install locks * test(ssh): prove previous-boot lock recovery live * test(wire): pin pre-metadata release coverage * fix(terminal): preserve remote tab ownership through recovery races * test(runtime): fence replaced terminal handles in agent guard * fix(ssh): preserve remote snapshot authority across polls * fix(pty): contain late ConPTY output EPIPE * test(pty): register Windows exit watcher before kill * fix: close SSH and tab readiness race gaps * fix(tabs): retain headless order and placeholder titles * fix(build): avoid parallel electron-vite config race * test(windows): avoid MSYS temp path rewriting * test(windows): avoid killing exited PTY * fix(pty): avoid late ConPTY input teardown race * fix(terminal): sync reconnect error ownership after commit * fix(runtime): use canonical worktree identity comparison * test(ssh): assert complete cold-hydration baseline * test(windows): invoke quoted retention fixture via PowerShell * test(windows): read ConPTY grid through mode con * fix(terminal): publish PTY replacements atomically * fix(terminal): infer stale identity on reattach * fix(terminal): fence stale pane PTY callbacks * fix(terminal): fence stale pane binds after rebind * fix(terminal): reject stale pane transport callbacks * fix(terminal): fence mirrored reattach spawn callbacks * fix(terminal): replace stale pane PTYs on remount * fix(ci): size the Windows launcher-compile test budget from measurement `native-smoke (windows-latest)` fails ~4.5% of runs on `preserves a multiline argument through the compiled remote launcher` with "Test timed out in 15000ms" — on unrelated PRs, for reasons that have nothing to do with them. Across 176 sampled attempts it is the only red that job produced, and it hit seven different PRs in two days: #16900, #16904, #16915, #16955 (twice), #16979, #17014, #17085. The test is six process creations: powershell.exe forks csc.exe, then the freshly compiled orca.exe forks node.exe, twice. Hosted Windows runners periodically slow process creation down, and this test amplifies that far harder than anything else in the job. Comparing the 80 attempts where it ran under 3s against the 12 where it ran over 12s, its own median goes 2198ms -> 15917ms (7.2x) while the same file's powershell-only test moves 556 -> 686ms (1.2x), the cmd.exe and Git Bash process tests in the neighbouring file move 1.4x, and the other 35 files put together move 1.5x. Measured across those 176 attempts: 1881ms to 35438ms, p50 4264ms, correlation +0.881 with the job's total Vitest duration. 8 of 176 (4.5%) exceeded the 15s cap; 2 of 176 (1.1%) also exceeded the shared 30s testTimeout, so deleting the override and inheriting the config is not enough on its own. 60s clears all 176 with 1.7x headroom on the worst. This is slow, not hung. Every body here is synchronous spawnSync, so Vitest cannot interrupt one — the timer fires only after the body returns and the reported duration is real elapsed time. That is why a failure reads `× ... 22464ms` under `Test timed out in 15000ms`. The work finished; the stopwatch was short. Seven reruns at one identical head measured 2053 / 4680 / 5551 / 8732 / 13506 / 14868 / 21937ms — the last of those would have been red on code that had not changed. The 15s came from #8897, which raised this test off Vitest's built-in 5s default because the job then ran bare `pnpm vitest run`. #8909 landed 3h27m later and pointed the job at config/vitest.config.ts, which is the real fix for that. The constant stayed behind and has been the binding budget ever since. * fix(terminal): fence stale remount reattach ownership * fix(terminal): reconcile mounted pane identity after replacement * fix(terminal): fence stale reattach fallback ownership * fix(terminal): fence deferred SSH reattach ownership * fix(terminal): fence stale split pane ownership callbacks * fix(terminal): keep stale spawns from consuming startup --------- Co-authored-by: Brennan Benson <79079362+brennanb2025@users.noreply.github.com> |
||
|
|
77f23b013f |
refactor(shared): drop the shared/types barrel and import from the real modules (#14447)
#14397 split `shared/types.ts` into 46 per-domain modules but kept the path as a re-export barrel so the import sites did not have to change. This removes the barrel: every consumer now imports from the module that actually declares the type, and `src/shared/types.ts` is deleted. Barrels hide where a type lives, make every consumer look like it depends on the whole domain, and let an unrelated edit invalidate a module that ~2,000 files transitively import. 2,323 import declarations across 2,321 files. Rewritten mechanically: each specifier was resolved to an absolute path via the TypeScript AST and recomputed, rather than string-substituted, so alias forms (`@/../../shared/ types`) and per-specifier `type` modifiers survive. Four cases the mechanical pass had to handle, each found by a gate rather than by reading the diff: - Modules inside `src/shared` import the barrel as `./types`, not `shared/types`. A pre-filter on the latter string skipped 176 of them and left imports dangling at a deleted file, which surfaced as confusing `Property 'x' is optional in type 'Repo' but required in Pick<Repo, ...>` errors rather than "module not found". - The barrel RENAMED one type on the way through (`WorkspaceSource as WorkspaceCreateTelemetrySource`), so the original name in the owning module has to be re-aliased at each consumer. - Three test files put `;(globalThis as ...)` on the line after the import. TypeScript parses that `;` as the import statement's terminator, so replacing through `statement.getEnd()` deletes it and breaks ASI. The rewrite now stops at the module specifier. - A file that already imported directly from a module got a SECOND import from it, because the barrel re-exported those same names — which trips `import/no-duplicates` under `--deny-warnings`. A post-pass merges declarations sharing a specifier and type-only-ness; the `import type` plus `import` pair from one module is left alone, since that form is allowed. Splitting one barrel import into several genuinely adds lines, which pushed `terminal-layout-pty-ownership.ts` to 301 counted lines: its 107-character import must wrap, and neither local type collapses onto one line (101 and 116 characters). Rather than contort a type declaration to fit a line budget, `collectLeafIds` and `pruneLeaves` move to `terminal-pane-layout-tree.ts` — they are pure structural operations on the layout tree and independent of PTY ownership. `visible-worktrees.ts` similarly loses its own mini-barrel re-export of `isDefaultBranchWorkspace`, with the four real consumers repointed at the declaring module. No `max-lines` bypass added. Verified: cold `tsc --noEmit` green on node, cli, and web (buildinfo deleted first — these projects are `composite: true` and reuse stale caches); the full `pnpm lint` green, not just bare oxlint — the narrower local check is what let the duplicate imports reach CI; max-lines ratchet OK at 344. |
||
|
|
4221f8d429 |
refactor(preload): split the preload contract into per-domain api modules (#14403)
`src/preload/api-types.ts` was 3,752 raw lines (3,533 counted, 11.8x the 300-line budget) behind an `eslint-disable max-lines`. Almost all of it was a single `PreloadApi` object type whose ~83 namespace properties were declared inline, so any IPC surface change meant editing one 2,600-line type. Give each namespace a named type in its own module under `src/preload/api/` (`pty-api.ts`, `filesystem-api.ts`, `github-pull-request-api.ts`, ...) and recompose `PreloadApi` from those names. `api-types.ts` keeps the `declare global` Window augmentation and re-exports every moved name, so all 52 import sites are untouched. Two shapes needed care to stay type-identical rather than merely compatible: - Three keys (`gh`, `git`, `ui`) are composed from two modules each. A plain intersection is NOT identical to the original flat object literal, so those use a `Merged<T>` mapped type; a negative control confirmed that dropping it fails the parity assertion. - Keys whose module groups several namespaces use indexed access (`fs: FilesystemApi['fs']`) to preserve exact identity and source order. `config/tsconfig.web.json` and `tsconfig.tc.web.json` enumerate files by path, so they need `src/preload/api/**/*` alongside the existing `api-types.ts` seed or the web projects fail TS6307. Verified by exact type identity, not assignability: 41 assertions of the form `Equals<Now.X, Before.X>` against a frozen pre-split snapshot, covering every exported name, plus a per-key pass over all 83 `PreloadApi` keys. All three projects typecheck clean with those assertions active. Verification note: these tsconfigs are `composite: true`, and `tsc --noEmit` will reuse a stale `.tsbuildinfo` and report clean for a state that genuinely fails. Every result above was produced after deleting the buildinfo, including a negative control confirming the gate still fails on deliberate drift. Drops the `max-lines` bypass and its baseline entry (ratchet 346 -> 345). |