A task's `due` is wall time in the task's `timeZone`, but the tasks
sheet, the calendar chips and task reminders read it as device time,
so a task due at 17:00 Europe/Berlin showed and fired at 17:00
wherever the phone was. Events already go through `utcStart`.
- resolve the due in its zone with a new `getTaskDueDate` and use it
for the list, sorting, overdue, the chips and reminder times
- save an edited timed due with the effective time zone, as the event
editor does, so the converted local time isn't read back in the
task's old zone
The editor page posted its full `innerHTML` on every input event and its
formatting state on every selection change, which fires on every
keystroke too. Each message re-rendered the whole composer, where a
`JSON.stringify` snapshot of the body ran on every render (PF8).
- typing now posts at most one `change` per 400 ms: the first keystroke
at once, so the composer knows it is dirty, then the latest content
when the window ends; toolbar commands and blur post straight away
- the formatting state is posted only when it changes
- the empty-placeholder check no longer serializes the body per
keystroke, and the dirty-tracking snapshot is memoized
- autosave reads the live editor DOM, like send, save-and-close and the
format switch already do, so the throttle can't make it save a
slightly older body
The body stays in state rather than a ref: the Send button and the
close guard render from it.
Quick replies went out with no signature at all. They are now signed
the way the composer signs a plain-text reply: between the reply and
the quote or at the end, following the signature position setting, with
the "-- " separator when it is on, and with the primary identity's
signature when the sending alias has none of its own.
The quick reply also resolves its sending identity like the composer
(webmail 4fc7b8b5): recipients in To, Cc, Bcc order, and a reply to our
own message from the identity that sent it. It still never takes the
catch-all From rewrite, having no From row to show it.
The composer's format came only from the "plain text only" setting, and
a reopened draft was forced into it: with plain text on, an HTML draft
was flattened on its first autosave, and with it off a text draft opened
in the rich-text editor.
Ported from the webmail (f6ad8a59, `compose-format.ts`):
- a reopened draft opens in the format it was written in; an empty
draft and new messages still follow the setting
- a toolbar button switches just this message between rich and plain
text, converting the body in place; the signature keeps its place
(end or above the quote) in the target format, so it is never
doubled or lost
- images inserted into the rich-text body stay on as ordinary
attachments after a switch to plain text instead of being dropped
A new message composed while a shared or group folder was open always
defaulted to the user's own identity: `findComposeIdentityId` was
ported from the webmail but never called.
The composer now reads the folder that was open when it was started and,
for a shared folder whose account name is an address the user has an
identity for, preselects that identity (webmail 129f545a, a971d5a1).
Own folders resolve to nothing and keep the preferred identity. Unlike
the webmail this isn't gated on "Reply from received address": the
webmail gates it only because it falls back to the login address, which
would override a chosen default identity (#507), and this path has no
such fallback.
Ported from the webmail (565d5c10). With "Reply from received address"
on, a new "Received address matching" choice limits the catch-all From
rewrite: "Exact address only" keeps replies to configured identities,
"Any address on my domains" (the default, and the old behaviour) also
sends from other addresses on an identity's domain. Deployments whose
extra addresses are distribution lists rather than aliases want exact.
The setting is `replyIdentityMatch`, the webmail's key, so it round-trips
through settings export and import. The toggle's description now says
that identities always match, since that no longer depends on it.
Replies went out from the default identity unless "Reply from received
address" was on, because that setting gated both the match against the
user's own identities and the catch-all From rewrite. Forwards took the
rewrite too, and a reply to one's own sent message resolved the identity
from the other party's address. Ported from the webmail (4fc7b8b5):
- the own-identity match is unconditional and applies to forwards;
only the catch-all From rewrite stays behind the setting, and never
on a forward
- a reply to our own message keeps the identity that sent it (#703)
- `findReplyIdentityId` scans recipients in To, Cc, Bcc order instead
of the identity list's, and prefers an untagged identity over a
differently tagged sibling
The composer's editor page had no Content-Security-Policy, so quoting a
message loaded every remote image and tracking pixel in it, even when
the viewer had shown that message with remote content blocked.
The editor page now carries a CSP that mirrors the viewer's: nothing
loads but our inline script, styles and images, and remote images and
fonts are blocked whenever the quoted original is one the viewer would
block (untrusted sender and a policy other than "allow"). A reopened
draft that carries a quote counts as untrusted. Inline and pasted
images (`data:`, `blob:`) keep working, and the sent HTML is unchanged.
Every mail row formatted its date through `toLocaleTimeString` and
`toLocaleDateString`, which build a new Intl formatter on each call; a
row from the last week built two, on every render. On Hermes that goes
through ICU over JNI and is the costly part of formatting a date.
`formatListDate` now keeps one `Intl.DateTimeFormat` per locale and
format in a module-level map. The output is unchanged, since those
methods format exactly as `Intl.DateTimeFormat` with the same options;
a test checks the two against each other across locales, formats and
ages. The cache starts over when the device's UTC offset changes, so a
new time zone still shows as it did when every call picked it up.
The notification only carried the local account it was posted for, so
tapping one for a message in a group or shared mailbox opened the
thread against the user's own JMAP account, where the message doesn't
exist.
The background task now passes the JMAP account the message was
fetched from as `jmapAccountId`. The native module stores it as an
intent extra, validated like the other ids, and hands it back with the
tap. `App.tsx` routes the open with it, the way the unified inbox does
for group messages. Notifications posted before this change have no
such extra and open against the account's own mail as before.
The launch-time effect in `App.tsx` re-ran the full setup for the
active account whenever a relay URL was stored, and that URL is shared
by every account on the device. Turning push off for one account, or
revoking this device, lasted only until the next launch or token
rotation. A subscription revoked from another device was re-created
without asking.
- Turning push off in settings and revoking this device now go through
`disablePushForAccount`, which tears the registration down and marks
the account as opted out. Enabling push again clears the mark.
- The effect calls `resyncPushNotifications`, which skips opted-out
accounts. If the server no longer has the recorded subscription
although it still had a day or more to live, it treats the
subscription as revoked and turns push off for the account instead
of registering again. A subscription that lapsed is re-created as
before.
- Setup records the expiry the server reports: from the create
response (`createPushSubscription` now returns it) and from every
listing.
`PushSubscription/get` ran with the default properties, which leave out
`emailPush`, so the stored filter never compared equal to the wanted one
and every launch sent it again. The calls also never named the
emailpush capability in `using`.
Ask for `emailPush` explicitly and send
`urn:ietf:params:jmap:emailpush` with every call that reads or writes
it, as the webmail's `lib/jmap/client.ts` does. Servers without the
capability keep the default properties and never see the property, so
the filter is only patched when it differs from what the server holds.
The emailPush map named every account with mailboxes. Stalwart refuses
the whole map as `forbidden` when it names an account the user neither
owns nor belongs to as a group member, so a user with a mailbox shared
by ACL had every refresh rejected. The refresh path then destroyed the
working subscription and the recreate was refused the same way, leaving
push off for good.
- On a `forbidden` refusal, retry with a narrower map: first the
accounts that look owned (Stalwart sets `mayCreateCalendar` and its
siblings only on the user's own and group accounts), then the primary
account alone. Stalwart only fans a subscription out to owned accounts,
so nothing is lost.
- Remember the refused accounts per account and leave them out of the
map on later runs; a forced re-register re-learns them.
- Keep the old subscription until its replacement is verified, so a
refused or failed replacement never leaves the device without push.
- `createPushSubscription` and `updatePushSubscription` now throw a
`JMAPMethodError` carrying the SetError type.
The JMAP part is shared by FCM and UnifiedPush, so both get the fix.
The viewer's pager followed the store's live list. New mail or a
refresh shifted the rows under the fixed scroll position, so the
screen switched by itself to another message while Star, Delete and
Archive kept acting on the one that had been opened.
The pages are now taken once when the viewer opens, in `viewerPages`,
so the page on screen and the message the toolbar acts on stay the
same. Delete, archive, move and spam leave the viewer as before, so no
page is left showing a message that is gone.
Stalwart ids are only unique per account. When its opener named no
account, the viewer used the account of the folder open in the list,
and it resolved Trash, Junk and move targets from that folder as well.
Deleting a team message from the Unified Inbox therefore sent
`Email/set` to the user's own account and trashed an unrelated message
with the same id, and a message opened from a notification, deep link
or contact while a shared folder was open went to the shared account.
- the list names the open folder's account when it opens the viewer,
and the viewer takes the account from its opener only, fixed at open
- Trash, Junk, Inbox and move targets come from the message's account,
and delete and move take the message out of its own folder
- the store's delete and move take the viewed message: they only touch
the list's row when the list shows that account, and refuse folders
of any other account
- another account's message is marked read on the server directly
instead of through the open folder's list
- quick reply, unsubscribe and read receipts file into the message's
account's folders
- undo no longer slots another account's message into the open list
- Archive is only offered for mail of the open folder's account, since
it still resolves the archive folder from there
Port of the webmail's `sortContactsByLastName` (fb24ef5d). With the new
"Sort by last name" switch in Settings > Contacts, the contact list is
ordered and letter-grouped by "Surname, Given Middle", so family members
sit together. Cards without a structured surname fall back to the last
word of `name.full`; organizations, nicknames and bare addresses keep
their display name. The setting defaults to off, is persisted, and is
exported and imported under the webmail's key.
`name.full` feeds the vCard FN, which is mandatory; strict CardDAV
clients such as Apple Contacts drop cards without it. The app left it
out or let it go stale on several write paths:
- the contact form (and "Add to contacts", which goes through it) only
sent `full` when the optional display-name field was filled in
- editing a card put its stored `full` into that field, so renaming
the person wrote the old name back as FN
- vCard import dropped FN once it had split it into components
Port the webmail's fix (a210b22e): the form derives `full` from the
name components in display order unless a display name of its own is
set, and the edit form only shows `full` when it differs from what
would be derived, so a derived one is recomputed on every save. Import
keeps FN verbatim whether it comes before or after N, and a card with
N but no FN gets a derived `full` too.
The "Sender Favicons" setting only covered the in-app avatars. Push
notifications always fetched the sender's favicon from
icons.duckduckgo.com, so with the setting off every notification still
sent the sender's domain and the device's IP to a third party.
The webmail has the same setting, on by default, and fetches through
its own `/api/favicon` proxy, so DuckDuckGo sees the server rather than
the user. Native has no proxy, but turning the default off would
silently drop the logos existing users see and diverge from the
webmail, which is a product call. So the default stays on and the one
existing switch now covers every favicon fetch: the notification task
reads it from the persisted settings and shows initials when it is off,
or when the settings cannot be read.
Sender avatars ignored address-book photos, so a contact whose photo
shows in Contacts still got initials or a favicon in the mail list,
the viewer and the thread cards. Like the webmail's `Avatar`, the
contact photo now wins over the favicon and the initials; `disableImages`
(Junk) still shows initials only.
The lookup goes through a lowercased email -> photo index that is built
once per contacts array, and each avatar selects just its own photo
string, so a list of avatars neither rescans the address book per row
nor re-renders when an unrelated contact changes. Stalwart returns
photos as inline data URIs, which the index normalizes the same way
Contacts does, so no authenticated download is involved.
With "Sync trusted senders to address book" on, the viewer trusted every
address in every address book, so remote images and tracking pixels
loaded for any contact, including mail with a spoofed From that uses a
contact's address. The toggle also switched itself on the first time
Content & Senders was opened on a contacts-capable account, so merely
visiting settings widened trust to the whole address book.
Now only the local allow-list and, while sync is on, the dedicated
"Trusted Senders" book count, as in the webmail viewer. The setting
stays off until the user turns it on, and the viewer only fetches the
book while sync is on.
The phone only ever read and wrote Sieve scripts and the vacation
responder of the user's own account, and the "Shared with me" list in
Account settings said to use the webmail for the rest. Port the
webmail's scoped settings (4c6c1aab) for these two panes:
- `api/sieve.ts` and `api/vacation.ts` take an optional account id and
gate on the account's own `accountCapabilities` for
`urn:ietf:params:jmap:sieve` and `urn:ietf:params:jmap:vacationresponse`,
treating non-personal accounts as capable because Stalwart doesn't
always advertise capabilities on them. Script blobs are uploaded and
downloaded against the same account.
- Tapping a shared account in Account settings scopes Settings to it:
only the Filters and Vacation Responder panes it supports are listed,
behind a "Managing: <name>" banner that leads back to the own account.
The scope is dropped when the signed-in account changes.
- The filter and vacation stores remember which account they hold,
reset when it changes and drop replies for an account the user has
already left, so one account's rules are never saved into another.
- The rule editor offers the managed account's folders as targets, and
the "vacation active" banner only shows for the own account.
A bare `keep;` delivers to the default place, which on Stalwart is Junk
for a message its spam filter has already classified, so an allow-list
rule made with "Keep in inbox" changed nothing. The webmail now writes
`fileinto "INBOX";` for it (62465e1e), but saving filters on the phone
wrote `keep;` again and undid that.
The action stays `keep` in the metadata, so scripts written by either
client read back as "Keep in inbox" and save unchanged.
zustand's JSON storage serialises the whole partialized slice and
writes it to AsyncStorage on every set(), including ones that only
flip `loading`. Opening one unread message rewrote the mail cache
about five times.
`createPersistStorage` now coalesces writes per store:
- a slice whose fields are the same references as the last one is
dropped without serialising; the email and contacts slices are
built through `memoizeSlice`, so a set() that only touches UI flags
hands over the same slice
- other changes wait up to 1 s and only the newest is serialised, and
JSON identical to the stored row, or to the row just hydrated from,
isn't written again
- pending writes are flushed when the app leaves the foreground and
when an account is signed out
- the account registry is still written straight away, since the
headless push task reads it from AsyncStorage
- "Refresh cached data" removes the rows through the stores, so their
storage forgets the old JSON and writes the re-fetched data back
Some senders ship the images their HTML body embeds by `cid:` as
`application/octet-stream` with no disposition and no name. The body
rendered them, but the chip filter only hid parts declared inline with
an image type, so they also showed up as nameless "Attachment" chips.
Port the webmail's rule: scan the HTML the body actually renders for
`cid:` references and hide a referenced part when it is an image or
generically typed. An explicit attachment disposition keeps its chip,
as does a referenced part with a real non-image type. A plain-text
render references nothing, so nothing extra is hidden there.
Previews keep the body's paragraph breaks, so a line-clamped row showed
a dangling "…" line and rows came out at uneven heights, and a subject
carrying CR/LF rendered over several lines in the list and the viewer.
Fold every whitespace run to a single space before display with a new
`singleLine` helper, in the mailbox and unified inbox rows, the viewer
subject and the collapsed thread card preview.
Full-message fetches cap body values at 512 KB and never read
`isTruncated`, so a bigger body rendered whatever the server cut off
with no notice; for a 586 KB HTML report Stalwart returned a 59
character stub and the viewer showed a heading, one line and "…".
Port the webmail's refetch: when the first HTML or text body part
comes back truncated, `getFullEmail`, `getFullEmails` and
`getThreadEmails` fetch the HTML and text body values of those messages
again in one batched `Email/get` with an 8 MB cap, keeping the values
of other parts. Truncated text attachments don't trigger it. If the
body is still truncated, or the refetch fails, the viewer now says the
message is too large to show in full.
The HTML and plain-text body documents had no direction, so an Arabic
or Hebrew message was laid out left-to-right: left-aligned, with its
sentence-final punctuation on the wrong side. Port the webmail's
`dir="auto"` on the body of both documents so the first strong
character picks the direction. An email that declares its own `dir`
on its `<html>` or `<body>` tag keeps it; the parser merges those
attributes into ours only while ours has none.
The shrink-to-fit reporter widens its wrapper to the content's natural
width and scales it from the top left. In a right-to-left body that
over-wide block overflowed to the left instead, so a 600px newsletter
scaled into the space left of the screen. A negative right margin now
keeps the widened wrapper flush left in either direction, so the
existing origin, pan clamp and pinch anchoring still hold.
The body stylesheet forced `max-width: 100% !important` onto every image
and table, which also beat a sender's inline max-width. An image sized
with `max-width:200px; max-height:134px; width:100%` grew to the pane
width while its max-height still clamped the height, so it rendered
squashed, and a table with `max-width:300px` spanned the pane.
Only force the cap on images and tables that declare no max-width of
their own, as the webmail does. Content wider than the pane is still
scaled down by the injected reporter, and images keep
`height: auto !important`.
Every keyword change sent the message's whole `keywords` map, which the
server takes as a replacement. Opening a message that wasn't in the
loaded list sent `{"$seen": true}` and wiped its star and tags; starring
a listed message sent the list's stale map and reverted keywords another
client had changed since the list loaded.
Keyword changes now go out as `keywords/<name>` patch pointers (`true`
to set, `null` to clear) everywhere:
- mark read/unread, star, pin and tagging in the email store
- spam / not spam, trash-and-read, and the spam undo, which now puts
back only the keywords the action touched
- star, tag and unread from the message viewer
- the offline outbox, whose keyword ops carry a patch and merge per
keyword when coalesced
Ops queued by earlier builds still hold a whole map. They replay as a
patch that only sets the keywords in it (clearing the other half of
`$junk`/`$notjunk`), so an unread or unstar queued before the update is
lost but nothing gets erased. The list and the offline cache apply the
same patch locally instead of overwriting their keyword maps.
The mailto parser decoded `+` as a space, as in HTML form encoding, so
`mailto:alice+news@partner.example` became "alice news@…", failed
validation and opened nothing; a `+` in a subject or body was turned
into a space as well. RFC 6068 only uses percent-encoding, so a `+` now
stays a plus, like the webmail's `parseMailtoUrl`.
App compose links (`bulwarkmobile://compose?…`) went through the same
parser after `URLSearchParams.toString()`, which writes spaces as `+`.
They are now re-encoded with percent-encoding, and the recipient is read
from the `to=` parameter only, which also stops it from being added
twice.
Sharing a photo or document from another app into Bulwark failed every
time: the upload task was handed the share's `content://` URI, but it
can only stream from a file path, so it failed with "Directory for
'/external/images/media/…' doesn't exist". The attachment was also named
after the URI's last segment (a MediaStore row id such as "1000000027"),
and SEND_MULTIPLE shares only carried a wildcard type like `image/*`.
- `uploadBlob` copies `content://` URIs into the cache, uploads the copy
and deletes it afterwards, also when the upload fails
- `ShareIntentStore` asks the providing app for the display name, size
and MIME type when the intent arrives, falling back to the URI segment
plus an extension for the MIME type
- the composer gets the real name, type and size, so the size limit
check now applies to shared files too
Adding a second account through the server's own OAuth opened the
authorization endpoint in the shared system browser with no `prompt`,
so the identity provider found the session of the account that was
already signed in and quietly handed back the same user.
When adding an account, the PKCE flow now sends
`prompt=select_account` like the webmail does (5771a213), or
`prompt=login` when the server's metadata lists no account picker, and
on iOS it runs the auth session ephemerally so the browser's cookies
don't carry over. The webmail hand-off gets the ephemeral session too.
Android's Custom Tabs have no private mode, so there the prompt is the
only guard.
The read receipt is assembled as raw RFC 5322 text, and every header
value in it comes from the message being answered. Stalwart returns
subjects already RFC 2047-decoded, so a sender could hide CRLF in an
encoded-word subject (or in the Message-ID or
Disposition-Notification-To) and have it interpolated verbatim. That
let them add headers such as Reply-To, or a whole body, to a message
the user's own account files in Sent and submits. `encodeHeaderWord`
passed any pure-ASCII value through untouched, CR/LF included.
Port the webmail fix: free-text values go through
`stripHeaderControls` (controls collapse to a space, then RFC 2047 if
non-ASCII), address-like values and message-ids through `headerAtom`
(controls and whitespace removed), and the From display name is quoted
when it uses specials.
Linus Rath