The "Sync with address book" toggle under Content & Senders was off until
the user turned it on, so senders trusted on the phone stayed in the
local allow-list and never reached the "Trusted Senders" address book the
other devices read. A setting the user never chose now counts as on;
only an explicit opt-out, or a server without contacts, turns it off.
The app had six ways to turn a name into avatar initials, and none of
them was the webmail's. The webmail's Avatar skips punctuation and
symbols in front of each name part ("Sofia" Russo is SR, not "S), takes
two letters of a single name and the first letter of the address
without one. Senders, accounts (sidebar and sign-in), contacts, compose
suggestions and the home-screen widgets all use that now.
Brings feat/device-sync into main: on Android, each account's address
books and calendars can sync both ways with the phone's Contacts and
Calendar apps (Settings -> Contacts / Calendar -> Sync to this
device), through a "Bulwark" Android account with a contacts and a
calendar sync adapter.
- native side: the account, both sync adapters, provider access scoped
to the account, push routing to the syncs, sync problem notices
- the sync engine in `src/device-sync`, run as a headless task
- the settings sections, sign-out and removal handling, translations
- design, limitations and verification in `docs/device-sync.md`
The native push router and the push task decided separately whether a
push may carry mail, and disagreed. For an account entry that is not
an object, or a map that names no type, the router started the mail
task as possible mail, but the task's guard read the same payload as
"no mail" and returned, so new mail it announced was never looked for.
A push without a kind was judged by its map in the router but taken
for mail by the task.
Both now apply the same rules: anything but a StateChange, a map that
is missing, unreadable or names no type, an unreadable account entry,
or a mail type means the mail task runs. Only a readable StateChange
naming contact, calendar or other non-mail types skips it.
Checked with one table of payloads run against the router's decision
and the task's guard alike.
On main every push ran the mail task, whose legacy path notifies the
newest unread inbox mail. Device sync narrowed that to pushes naming
EmailDelivery, so contact and calendar changes never notify. But a
subscription made by an older build listens to Email and Mailbox until
the app is opened again, and a server without EmailDelivery reports
new mail only as those changes. Their new mail no longer showed a
notification while the app was closed.
Email and Mailbox now count as possible mail again, in the native push
router and in the push task alike. A push that names only contact or
calendar types still never takes the mail path.
Checked with the push router and push task tests: an Email or Mailbox
change starts the task and the legacy path notifies the message,
next to the syncs a mixed map asks for.
The push subscription got the contact and calendar types whenever the
account had device sync on, without asking whether its server has
contacts or calendars. Sync can be on for such an account: the settings
list every signed-in account, and a server can drop a capability later.
A server that refuses unknown types then refused the update and the
replacement, and push setup failed: a new account got no mail push, an
existing one lost it when its subscription expired.
The types are now added only for a capability the account's session
advertises, and a write the server refuses while it carries device
sync's types is retried with EmailDelivery alone, so mail push never
depends on device sync.
Checked with the push setup tests against a fake server that refuses
unknown types: a new subscription is created mail-only, an existing
one is kept and refreshed, and another account's subscription is left
alone when its server lacks the capability.
On Android, Settings > Contacts and Settings > Calendar get a "Sync to
this device" section with a row per signed-in account. This makes device
sync reachable:
- The switch asks for the contacts or calendar permission after a short
explanation (denied: sync stays off and says why, with a link to the
app's system settings once Android stops asking), creates the
account's Bulwark account in Android and syncs right away. Turning it
off uploads what the device changed first and asks before anything
that could not go up is lost. The switch shows Android's own state, so
sync turned off in Android Settings shows as paused.
- Which address books or calendars sync: the personal account's are on
by default, shared ones and the Trusted Senders book off; read-only
ones are marked, and a note says when another signed-in account
already syncs the same shared one.
- The address book new contacts from other apps go to, who reminds of
synced events (the calendar app or Bulwark, asked when calendar sync
is turned on while Bulwark's reminders are on), and how often Android
syncs on its own (every 15 minutes to every 6 hours, or not at all).
- "Sync now", the last sync with its result, or the error with what to
do about it ("Sign in again", "Grant access", "Review deletions"), and
a link to the account in Android Settings.
- Accounts the app signed out while they synced are listed with "Sign
in again" and "Remove from this device".
The settings search finds both sections. iOS, and Android builds without
the native module, show nothing new.
Checked: the collection listing and status tests, the settings search
and i18n tests, `npm run typecheck`, `npm test` and `npm run i18n:check`
on this commit, and on the API 32 emulator with usera on the local
server: the section, turning contacts sync on (Android account created,
152 contacts on the device, one per card) and the status after a run.
Any web page (one tap) or installed app (no tap) could fire a
`bulwarkmail://pair` link at the app, which then silently added the
sender's mailbox and switched to it, so the user might send or save mail
into an attacker's account. A `connect` link likewise opened any
server's sign-in page.
- Links that arrive from outside the app now ask first, naming the
webmail's host and whether the link adds an account. Cancel discards
the link for good; a link delivered again while the question is open
is dropped. Codes scanned or pasted inside the app still go straight
through.
- With the account registry full, a link shows the limit instead of
opening "Add account".
- A pairing link for a plain-http webmail says the connection would be
unencrypted instead of "That code isn't a Bulwark sign-in code", or
nothing at all for a tapped link.
Signing in connects the shared client to the new account and stores its
credentials before the account registry takes it. With ten accounts the
registry refused, but nothing undid the connect: every request then went
out as the new account while the app still showed the old one. A
sign-in link made this easy to reach, since it opened "Add account"
without the limit check the menus have.
- A failed registration now restores the previous connection and drops
credentials the registry never took.
- Adding an account to a full registry is refused before a sign-in code
is spent or a browser sign-in starts, with "Remove an account in
Settings to add another one."
When an account's calendars sync to the device and the user chose the
device's calendar app to remind them, that app gets the events'
reminders. Bulwark's own reminder scheduler now skips the events of
those calendars, which would otherwise remind the user twice. Tasks
never sync and keep Bulwark's reminders, and a change of who reminds, or
of which calendars sync, reschedules right away.
Checked: the reminder filter and scheduler tests, `npm run typecheck`
and `npm test` on this commit.
With device sync on, Android should hear about a change as soon as the
app does, not only at the next periodic sync. This adds what tells it:
- The app's own contact and calendar edits, StateChanges on the live
stream for `AddressBook`/`ContactCard` and `Calendar`/`CalendarEvent`,
and the app coming back to the foreground request a sync of that
account and authority. Requests within 5 s fold into one, and a
StateChange the engine caused itself (its own upload echoing back) is
skipped.
- While the app is closed, the account's push subscription carries
those types too. The FCM and UnifiedPush services hand every push to
the native router from f743ab0, which requests the syncs, and start
the mail push task only when a push has `EmailDelivery`; the task also
returns early for such pushes, so a contact change can never show the
"newest unread mail" notification.
- At launch, on foreground and when Android's accounts change, the app
checks Android's accounts against its own: an account removed in
Android Settings shows sync off and is not recreated, and one whose app
account is gone stops syncing and posts "Sign in again", keeping its
data.
The functions that turn sync on and off (`src/device-sync/app/lifecycle.ts`)
come with this; the settings that call them land in a later commit, so
nothing here runs before an account has device sync on.
Checked: the new store, lifecycle, trigger and push tests, `npm run
typecheck`, `npm test` and `npm run i18n:check` on this commit, and the
debug build.
Every failed redeem read "That code has expired": a code already used,
a webmail without pairing (404), a rate limit, a server error and a
network failure all looked the same, and a non-JSON answer surfaced as a
raw parse error. The app now reads the webmail's `invalid_code`,
`expired_code` and `used_code` answers (webmail 1.11's catch-all 400
reads as "expired or already used"), gives up after 15 s, and names the
host involved; a failure after the code was redeemed says the phone was
signed in but could not reach the mail server.
- `loginViaPairing` accepts `flow: 'password'` bundles (an app password,
or the account password from servers without OAuth) in normal and
add-account mode, and never redeems the same code twice.
- A `pair` link must point at an https webmail (loopback http for
development); `pair/?` is accepted too.
- A token refresh that answers 200 with a non-JSON body keeps the
account instead of signing it out.
A sweep of src for what the earlier passes missed:
- The message export errors ("Sharing is not available on this
device", "Download failed: 404") were English; they come from the
catalog now.
- Event cards and details glued the participant count to a lowercased
"Participants"; they use the webmail's participant plural.
- Contact activity dates ignored the app language.
- Imported filter rules from an unknown tool showed the parser's
English "External" instead of the translated label.
- The contact field remove button and the vacation editor's
bold/italic/underline/list buttons get screen reader labels.
Reminder notifications are worded when they are scheduled, outside
React, and were always English ("Starts in 15 min", "(No title)",
"Task due"). They now come from the catalog through the locale store,
with ICU plurals for the minutes, hours and days. Each scheduled
reminder records its language, so switching languages rewords the
pending ones, and the Android channel ("Calendar reminders", shown in
the system settings) is named and renamed in the app language.
The reminder labels picked the English form whenever a catalog entry
was an ICU plural, which is all of them; they now pass the count to
t(), and "minutes after" is one plural message instead of a number
glued to a fragment. The import refusal error, the exported alarm
text and the "sharing is not available" error are translated too.
- The custom recurrence editor and its summary were English throughout
(labels, units, weekday and month names, "on the third Thursday");
they now use the webmail's recurrence fragments and the app's date
locale. The interval and occurrence counts are ICU plurals, also in
the event details, which filled "Every {count} days" with
`.replace`.
- The iCal subscription sheet is translated with the webmail's
subscription strings, and its "last updated" time is relative in the
app language. The feed errors it shows come from the catalog too.
- The calendar share sheet asked for `calendar.share.role_*` keys no
catalog has; it now uses the webmail's sharing presets and title.
- Close, remove, refresh, unsubscribe, delete and new-task buttons get
screen reader labels, the event editor's switches are named, color
swatches read out their color, and task checkboxes and calendar rows
report whether they are checked.
The calendar i18n test now covers the sheets.
The message details panel built its received line, attachment summary
and spam score by gluing strings together; each is now one ICU message
(the attachment count is a proper plural). The SPF/DKIM/DMARC results
use the webmail's translated result names, and an invitation's date is
formatted in the app language instead of always in English.
The quick reply box wrote its own "date, name <email>:" quote header;
it now uses the composer's translated "On {date}, {from} wrote:" line
so both kinds of reply look the same.
The back button, the subject and header star buttons, the sender
avatar and the More/Tag sheet close buttons get screen reader labels,
and the screens i18n test covers the viewer files.
The Notifications pane shows a push setup failure as "<phase>: <message>"
with a translated phase but an English message, and the open-link
confirmation and the new-mail notification title were English too.
They now go through the locale store's t() (translate() in the
background task), with the technical detail passed as an argument.
The sign-in screen showed the auth store's raw English error ("Session
expired", "Invalid username or password") as the notice title. It now
runs it through describeLoginError like every other sign-in failure,
which also learns to explain an expired session with the webmail's
login.session_expired copy. The back and close buttons of the sign-in
steps get screen reader labels, and the email placeholders use the
webmail's translated example address.
The calendar placed events by the calendar time-zone setting, but
"today", the now-line and the "Today" button still went by the device
clock. With the setting away from the device zone, the grid could
mark yesterday as today, draw the now-line hours off and jump to the
wrong day.
- the views, the agenda's "Today"/"Tomorrow" headers and today anchor,
the selected day, the scroll window's start and the "Today" button
use `displayNow`, `isDisplayToday`, `isDisplayTomorrow` and
`displayNowMinutes`
- a long press at an hour already hands the editor a calendar-zone
time, which it converts when it saves
- changing the setting re-buckets the days and reloads the loaded
range, since the server reads floating times and the range bounds
in that zone
With the calendar time-zone setting away from the device zone, the
event and task editors showed device-local times but saved them
labelled with the calendar zone, so opening an event and saving it
unchanged moved it by the difference between the two zones.
The calendar now works in display dates like the webmail
(`toDisplayDate` / `fromDisplayDate`): Dates whose local fields read
as the wall clock in the calendar zone. They are the identity while
the calendar follows the device.
- `getEventStartDate` / `getEventEndDate` return display dates, so the
views, the detail sheet and the editor show calendar-zone times
- the editors convert back through `eventTimeFieldsToSave` and
`buildTaskEditorChanges`: a start, end or due the user left alone is
saved exactly as stored, a changed one is converted into the zone the
event or task lives in (new, floating and formerly all-day ones take
the calendar zone), and durations count whole days as calendar days
in that zone
- `getTaskDueDate` stays the real instant for reminders; the tasks
sheet uses `getTaskDueDisplayDate`, `displayNow` and
`isDisplayToday`
- wall clocks are parsed from their digits, so one inside the device's
own DST gap still converts right
- duplicating an event keeps its wall clock in its own zone instead of
reading the device time
When the pages beside the open message were let go, each asked for its
conversation on its own, so every open sent two `Thread/get` requests
for its neighbours.
Conversations asked for in the same tick for the same account now go
out together: `getThreadsHeaders` takes several thread ids in one
back-referenced Thread/get → Email/get, and the cache batches its
callers into it. A conversation the server does not know, or a failed
request, still falls back to the copy held from before.
`getThreadEmails`, which downloaded every member's full body, had no
callers left; it is removed and its tests moved to `getFullEmails` and
`getThreadsHeaders`.
The invitation banner loaded the .ics whenever it was handed a new
message object, so marking an invitation read or starring it
downloaded and parsed the calendar part again (and fetched its raw
text when the method had to be read from it).
It now loads once per message, account and calendar part
(`calendarInvitationKey`), and reads the current message only when the
load runs.
The viewer's message cache, the rendered documents of their bodies and
their measured heights stayed in memory after signing out or removing
an account. Their keys name the server and login, so no other account
saw them, but a signed-out user's mail should not stay around.
Signing out (one account or all) and removing an account now clear all
three. A load still in flight when the cache is cleared no longer
stores what it brings back.
An "All folders" search or a tag view holds rows of the own and the
shared accounts, and Stalwart hands out ids per account, so an own and a
team message can share an id. The list still named its rows by bare id:
selecting one of such a pair selected both, a batch action hit both, and
a swipe or single-row action took whichever came first, in the other
account.
The list now names every row by `rowKeyOf` (its id, scoped by its
account in a list spanning accounts; the bare id in a folder, so nothing
changes there) end to end:
- FlatList keys, row presses, swipes, selection and select-all
- thread expansion of a selection (`expandThreadSelection`)
- every store action the list calls: read, unread, star, pin, the
per-account keyword batch, move, archive, delete and spam, and the
rows they drop or keep in view
- the viewer's pages, which now come only from the rows of the opened
message's account (`listRowsOfAccount`), and its mark-read, which
goes through the store when the list holds that account's row
A key whose row is no longer loaded is ignored rather than guessed onto
the open folder's account. The unified inbox already keys its rows by
account and needed no change.
`buildTimedFullDayWeekSegments` tested every event against every day it
was given. That was fine for the paged week, but the scrolling week and
day grids hand in months of days. It now tests each event only on the
days it spans, with the same `isTimedEventFullDayOnDate` check, so the
strip and the timed grid still agree on every day (DST days included).
The time grid's own copy of this is gone.
The week view showed one week and only the arrows moved it, and there
was no day view at all (a "day" default view opened the agenda). With
free scrolling on (the default) both are now one strip of day columns
that scrolls sideways, as in the webmail (15a5497a):
- the week view shows seven columns and snaps to single days; the new
day view shows one column and moves a day per swipe; the title
follows the first day in view and the arrows step from it
- reaching either end adds days and loads only their events; days added
at the start keep the columns on screen in place
- the day headers and the all-day strip follow the sideways scroll on
the native thread; all-day bars are cut per week (per day in the day
view) so each part carries its title
- columns are windowed and lay out their events once per change
The day view is offered as a default view again. With free scrolling
off, or in right-to-left layouts, the week view pages as before and the
day view shows a single day.
The month view showed one month at a time and only the arrows moved it.
With the new "Free scrolling" setting (on by default, the webmail's
`calendarFreeScroll`) it is one continuous list of weeks, as in the
webmail (15a5497a, ae403b06):
- the month under the upper part of the grid is drawn at full strength,
names the title and is where the arrows step from; the first day of
each month carries the month's name
- reaching the top or the bottom adds weeks there and loads only their
events; weeks added above keep the rows on screen in place
- rows have a fixed height and snap to whole weeks, so the list stays
windowed and navigation lands exactly on the month
Turning the setting off brings back the paged month and a fixed 30-day
agenda. The week view still pages.
The agenda listed 30 days from the current date and the arrows paged
through it 30 days at a time. It now keeps a window of days that grows
as the user scrolls, like the webmail's agenda (60e05c00):
- reaching the end loads further ahead, doubling that side up to a year
- "Show earlier events" loads the past without moving what is on screen
- "Today" and the arrows scroll to their day while it lies inside the
window and start a fresh window there otherwise; the title follows the
day in view
- the "Today" row only anchors the list when today was actually fetched
Growing the window fetches only the new days: `extendRange` in the
calendar store loads the missing part and merges it into the loaded
window (up to about three years) instead of refetching all of it.
Navigation now goes through one focus for every view, so the week
view's arrows move the grid (it kept showing the selected day's week)
and the month arrows carry the selected day along.
Signing in sent two full `Mailbox/get`s before the inbox loaded, and
the first only went out once the main screen had mounted and painted.
There is no deliberate delay behind the gap: the mail screen's mount
effect started the folder load, and the push setup read the same
folders again with a `Mailbox/get` of its own (plus the shared
accounts') just to find the Junk folders for its filter. The latter
also happened on every start with push notifications on.
- Sign-in (password and OAuth/pairing) starts the folder load as soon
as the session is up, like a restored session already did.
- The mail screen's mount now joins a load on its way
(`ensureMailboxes`) instead of queueing another behind it.
- The push filter takes the folders from the mail store (joining its
load) and only fetches them itself when the store has none for the
account.
Coming back to the app first waited for a `Core/echo` (sometimes two:
the keep-alive timer that was due fired alongside) and for the event
stream to be set up before the catch-up sync started. A failed echo
only led to `retrySession`, which does nothing while the session is
live. On top of that, a `Core/echo` went out every 30 s although the
event stream's own pings already show the server is reachable.
- On resume the stream reconnects and the folders and open list are
synced right away; one echo runs alongside for the connection dot.
- The 30 s echo is only sent while the event stream is not open
(polling fallback, reconnecting, client certificate). An open stream
whose pings arrive (the live-updates handle's new `healthy`) marks
the account connected instead.
- Echoes never overlap, and a periodic one right after the resume one
is skipped.
The list sorts pinned (and unread, starred or tagged, with an order
preset) messages first with `hasKeyword` comparators, and Stalwart reads
their direction the other way round (#718). To find out, the app sent a
probe request before the first list load of every start, because the
verdict was only kept in memory.
A conclusive verdict (RFC order, inverted, or keyword sorts refused) is
now stored per server and account under a versioned key and reused on
later starts. It is probed again once it is a week old, since a server
upgrade may change it. An inconclusive probe is still only kept in
memory and retried after a few minutes.
Every sign-in and app start read the account's full name with
`x:Account/get`, and the first message opened (invitation or not)
looked up the account aliases with it too. Stalwart refuses that method
to everyone but admins, so for most users both were wasted requests
that always came back `forbidden`, and the full name was never
refreshed.
- The full name now comes from `x:AccountSettings/get` (its
`description`), which every user can read, like the webmail (#900).
- The alias lookup only runs for a message that carries a calendar
invitation (and the calendar).
- A refusal of `x:Account/get` is remembered per account for the
session, so it is asked at most once.
The unified inbox reloaded page 1 of every account each time it came
back into focus, so opening a message and going back cost one
`Email/query` per account even when nothing had changed.
It now reloads on focus only when something may have changed since the
last load: the inputs or the active account changed, the live session
reported an `Email` state change, the opened message was unread (the
thread screen marks it read), the app was in the background (the event
stream is closed there), or accounts without a live session are shown
and the last load is over a minute old. An `Email` change that lands
within a few seconds of a focus that skipped the reload (the echo of an
archive or delete from the thread screen) reloads then.
Opening the viewer while it was on top, e.g. by tapping a notification,
did not push a new screen: React Navigation handed the new target to
the same route as new params, and the viewer, which fixes its message,
account and page list when it opens, ignored them. The tap did nothing.
The route now mounts the viewer afresh for every new target it is
given, keyed by the message, its account and the open, so the new
message is shown with its own page snapshot. Params that stay the same
keep the viewer as it is.
Every body started as a 120 px strip that grew once the page had
measured itself, so an open showed a skeleton, then a clipped strip of
the body, then the full body, and the quick reply box below it jumped
down as the WebView grew. A conversation arriving after the message
swapped the single-message layout for cards, which reloaded the body
and pushed it down under a "Loading conversation" row.
- `lib/body-heights` remembers the last measured height of each body
(per width); a body shown before starts at that height.
- A page showing one message stretches its body over the space below
the header until it has measured itself, and the quick reply sits at
the bottom of the page, so it does not move whether the body turns
out shorter or longer. Conversation cards start from an estimate
(most of a screen for HTML, the wrapped line count for plain text).
- A single message is rendered through the conversation's card list,
so its body stays mounted when the conversation arrives; while it
loads, the size the folder list knows for it holds the older cards'
places, and the loading indicator sits in the subject row.
- An open card whose body has not arrived shows its header over
placeholder lines, with its reply buttons disabled until it has.
The body view reset its inline-image map to a new empty object right
after mounting, which rebuilt the sandboxed document, so every body was
sanitised twice per mount. A body that mounted again (the page beside
the open one becoming the open one, a card closed and reopened, the
message opened a second time) was sanitised from scratch as well.
The document is now built by `lib/email-body-document`, which keeps the
last ten per message, body and rendering settings and hands back the
same one when they match, and the mount no longer replaces the empty
map.
The detail and conversation requests only went out once the viewer had
mounted and its effects ran, after the navigation had rendered.
A tap on a row in the folder list, the Unified Inbox or a contact's
activity, and a notification tap, now start the message's detail and
its conversation (when threading is on) through the shared cache, and
the viewer joins the requests already in flight. It runs on the tap and
not on press-in, because on a phone a touch that starts a scroll
presses rows too.
The Unified Inbox and contact activity also leave their rows in the
cache, so pages handed over by id get their header painted from the row
(and the right thread id) instead of a skeleton.
Every open went to the network for the full message, even for a message
the viewer had just shown, and the conversation fetch then downloaded
every member's full body again, the opened one included. The pager's
three panes each started their own detail and thread fetch, so one open
from the Unified Inbox fetched the body twice and the thread twice.
Messages and conversations now live in a shared cache
(`lib/email-detail-cache`), keyed by server, login and JMAP account:
- a held copy renders at once; bodies never change, so it is only
checked, with a keywords/folders-only `Email/get`, when the account's
Email state (from push or our own reads) moved on or the list row the
message was opened from disagrees with it;
- a copy in the offline cache is shown before anything goes out and is
checked the same way;
- a conversation is listed from its members' headers (`Thread/get` and
list properties in one request) and bodies are downloaded only for
the open cards, in one batched `Email/get`;
- concurrent loads of the same message or thread share one request.
The store's network-first `getEmailDetail` is gone; its offline-copy
refresh moved into the cache.
An answer to an invitation always went to the whole series, even when
given on one occurrence. The webmail asks which occurrences it covers
(#1086); the app now does too.
- answering on an occurrence opens the scope dialog with "This event
only" and "All events" (an attendee cannot split the organizer's
series, so "This and following" is not offered)
- "This event only" writes the answer to that occurrence: through its
synthetic id, or as an override on the base event for one expanded
on the device, with the whole participant map, the organizer and
the sequence (`buildOccurrenceRsvpPatch`), so Stalwart replies with
the occurrence's RECURRENCE-ID
- "All events" and answers on single events work as before
"This event only" wrote a `recurrenceOverrides/<id>` pointer on the
master for every occurrence. That pointer fails while the series has
no overrides yet, replaced whatever the occurrence already overrode,
and left the new override without the occurrence's title, place or
reminders. Deleting one occurrence went the same way.
The store now keeps a change to an occurrence on that occurrence, the
way the webmail's `resolveMutationTarget` does:
- a server-expanded occurrence is updated or destroyed through its
synthetic id; a server that refuses synthetic ids gets the same
change as an override on the base event, and is remembered
- an occurrence expanded on the device becomes an override on its base
event that keeps the existing override, pins start and duration,
and is sent as the whole map when the series has none yet
- a new override carries the occurrence's details and sequence
(`withNewOverrideDetails`), so it neither loses them nor ranks below
the series
- "All events" and "This and following" still go to the master
The calendar's scope dialog hands "This event only" to `updateEvent`
and `deleteEvent` with the occurrence's id, and
`buildRecurrenceOverridePatch` is gone.
Recurring series were always fetched whole and expanded on the device,
the webmail's fallback for Stalwart before 0.16.20. Newer servers
expand them with `expandRecurrences` and accept the synthetic
occurrence ids in `CalendarEvent/set`; the webmail uses that since
`lib/recurrence-instances.ts`.
- `supportsSyntheticCalendarIds` probes once per server and account
with an update of an id that cannot exist (`notFound` means
supported); the probe rides along with the first `Calendar/get`
- when supported, a range is loaded with `queryExpandedEvents`, the
occurrences are fetched with `baseEventId` and hydrated with their
base event's rules, overrides, all-day flag and duration; duplicate
listings of one occurrence are collapsed like the webmail does
- a range the server refuses to expand ("expanded recurrences
exceeds") and older servers keep the device-side expansion, which
now passes server occurrences through untouched
- changes, deletes and RSVPs resolve a synthetic id to its base event
(`resolveSeriesTarget`), including a master fetched for an
occurrence of a shared calendar, and reload the range afterwards
since synthetic ids reshuffle
- reminder keys use the base event and recurrence id, so a reshuffle
does not reschedule them
- client-only fields are stripped from `CalendarEvent/set` payloads
A task due without a time zone was read as device wall time, while
Stalwart computes a floating event's start in the calendar time-zone
setting the app sends with every query. With that setting away from
the device zone, a floating task and a floating event at the same
wall time showed hours apart, and task reminders fired at the device
reading.
`getTaskDueDate` now resolves a floating timed due in the effective
calendar zone; dues with their own zone and date-only or all-day dues
are unchanged. The device zone is cached for 30 seconds, since task
sorting resolves a due per comparison and building an
`Intl.DateTimeFormat` is slow on Hermes.
Tapping a reminder notification only brought the app to the front:
nothing listened for expo-notifications responses, so the event never
opened.
- reminders now carry the event's server id, account, occurrence,
start and the signed-in account alongside the store id
- `startCalendarReminderTapHandling` picks up the reminder that
launched the app and any tapped while it runs; it only acts on
reminders it scheduled, and mail push taps keep coming through the
native tap store
- the app switches to the reminder's account if needed, parks the
target in `pending-calendar-open` and opens the Calendar tab, which
shows the event in the detail sheet or the task in the tasks sheet
- the event is looked up by its server identity, first in the loaded
window, then in the day around its start, then as the stored event,
so an occurrence outside the visible month still opens; a deleted
one says "This event is no longer available."
Saving in the tasks sheet ran `onCreate`/`onUpdate` in a `try/finally`
without a `catch`, so a refused create or update became an unhandled
rejection: the spinner stopped, nothing was shown, and the user could
not tell whether the task was saved.
The editor state and the save logic move to `src/lib/task-editor.ts`.
`submitTaskEditor` returns the server's reason instead of throwing; the
sheet shows it in an alert and leaves the editor untouched so the input
can be fixed or saved again. It is cleared only after a successful save.
The attachment chips on list rows fetched every row's parts from the
account of the open folder. In an "All folders" search or a tag view the
rows come from several accounts, so a hit from the team inbox asked the
user's own account, which answers for another message with the same id,
or not at all.
A row that carries an account stamp now loads its chips, and opens an
attachment from them, in its own account; the chips a row remembers are
keyed by that account too.
"All folders" sent its Email/query only to the account of the open
folder, so mail in a shared (group) account the same login reaches never
showed up: "zephyr" found the 3 own messages and missed the 5 in the team
inbox, although that inbox sits right there in the sidebar.
The search now asks the own account and every shared account with
folders in the sidebar, like the webmail's `searchAcrossAccounts`:
- one request carries Email/query, Email/get and Thread/get for each
account (`queryEmailPagesAcrossAccounts`), and the pages are merged
under the list order
- each row is stamped with its JMAP account (`Email.jmapAccountId`), so
opening a hit opens it in that account and read, star, tag, archive,
delete, spam and move act there, filing into that account's own
Archive, Trash or Junk; one undo restores rows in every account
- "load more" continues each account from its own rows on screen rather
than one shared offset, which would skip messages of the account with
more hits
- an account that fails leaves the others' hits on screen with a notice
- a push for any account re-runs the search
- list keys, thread grouping and conversation sizes are scoped by
account, as JMAP ids are only unique per account
- deleting a hit judges Trash and Junk by the hit's own folders, not the
open folder, both for the move and for the permanent-delete confirm
A search scoped to one folder still asks only that folder's account.
The reader's attachment preview wrote every file to the same
`bulwark-exports/<name>`. React Native caches images by path, so a
second attachment with the same name (such as Outlook's `image001.png`)
could show the first one's picture. The preview now uses a temp folder
of its own per preview, as the Files tab does, also for parts unpacked
on the device, and deletes it when the preview closes unless the file
was shared to another app. A download that finishes after its preview
was closed no longer reopens it.
Linus Rath