* feat(computer): type into a named text field without focusing it on Linux and macOS
* fix(computer): report unconfirmed Linux text readback and cover element typing
* test(computer): send an element with benchmark text only for targeted typing
* test(computer): pick gedit's editor, not its hidden overview map, in Linux e2e
* docs(computer): confirm focus before the unindexed type-text fallback
* fix(computer): report unreadable element text readback as readback_unsupported
* fix(tab-group): track divider drags by pointer and keep guests click-through
When a divider drag's first move lands on a browser page, the guest's
process takes that event and every later one, so pointer capture never
activates and the divider stays stuck in is-dragging. Hold webview drag
passthrough for the whole gesture, as the pane-divider, tab and DevTools
dock drags already do.
Linux Chromium can report hasPointerCapture() false while moves still
arrive (#34287), so own the gesture by pointerId with window-level
listeners, and end it on a buttonless move when the release was missed.
Drawn from #35919 by alpenshtokk.
Co-authored-by: alpenshtokk <wawesandways@gmail.com>
* fix(tab-group): keep split dividers grabbable beside a narrow browser group
A squeezed browser toolbar overflowed its overlay slot and sat on top of the
divider to its right, so presses in the toolbar row never reached the handle.
Clip the overlay slot to its group like other retained pane hosts.
Adds a real-mouse e2e for a narrow terminal | browser | terminal row: the
divider must be uncovered along its whole height, follow a drag whose first
move lands on the page, and accept the next drag afterwards.
* fix(tab-group): end a lost divider drag on blur, hide or re-press
A release outside the window could be missed with no buttonless move to end
the gesture, leaving guest passthrough held and letting a later pressed move
resume the old drag. End the gesture when the window blurs or is hidden, and
let a new press of the same pointer replace a gesture whose release was missed.
Covers release outside the window, Linux false capture, multiple guest
surfaces and unmount mid-drag.
Co-authored-by: alpenshtokk <wawesandways@gmail.com>
* fix(tab-group): end a lost divider drag on the next press anywhere
Divider moves are tracked on window, but the same-pointer recovery only ran
when the next press landed on the stale handle itself. A press on another
divider or on pane content let later pressed moves resume the old drag, and
with two dividers both followed the new gesture. Listen for the active
pointer's next pointerdown on window in the capture phase and end the stale
gesture before anything handles the press.
* fix(browser): clip the narrow browser toolbar without making it scrollable
overflow-hidden still made the browser overlay slot a scroll container, so
tabbing to a toolbar control clipped in a narrow group scrolled the toolbar
and page sideways with no way back. overflow-clip clips the same way without
a scroll position.
---------
Co-authored-by: alpenshtokk <wawesandways@gmail.com>
* fix(computer-use): scroll, expand and set sliders on Windows without raising the window
* fix(computer-use): wait for Windows scroll and slider writes to settle before verifying
* fix(computer-use): reject NaN for Windows slider set-value
* test(computer-use): wait on the Windows fixture state with vi.waitFor and a schema
* test(computer-use): check activation per action against a holder window in the Windows fixture
* test(computer-use): log fixture window events for activation failures
* fix(computer-use): report foreground when a Windows app raises itself for a UI Automation action
WPF activates its own window for Scroll, ExpandCollapse, RangeValue and SelectionItem calls from any UIA client, so the runtime now compares the foreground window before and after a pattern action instead of assuming background. The Windows e2e checks delivery against the fixture's own activation count, with a holder window in another process.
* test(computer-use): skip an unstarted holder when closing the Windows fixture
* fix(computer-use): bound Windows pattern scroll paging and tighten slider read-back
* fix(computer-use): cap Windows slider read-back tolerance and run the UIA e2e only on CI
* fix(browser): keep guest input bound to its webContents
* test(browser): reject unresolved guest input routes
* test(browser): keep text on the guest when the root frame probe fails
* fix(browser): insert guest text only into a confirmed focused frame
Electron's webContents.insertText crashes the guest renderer and never
settles when no local frame holds focus (a fresh tab, or focus in a
cross-site frame after a root probe timeout). Use it only when the focus
probe confirms a focused element or same-site frame, refuse otherwise,
and reject promptly if the renderer dies or stops answering.
* test(browser): explain the busy-page e2e timeout
* fix(browser): expire guest text edits at the renderer mutation boundary
* fix(browser): preserve focused local frame contexts for text edits
* fix(tab-group): keep a grabbable tab in narrow tab-group strips
Tabs were the only shrinkable item in a pane's strip, and the only drag
source, so a narrow pane clipped them to 0px while +, quick commands, the
pane-actions menu and the reserved window-chrome spacers kept their width.
Give the tab area a 40px floor and let the action chrome clip before it.
* test(tab-group): open the right sidebar so the narrow-strip e2e is platform-neutral
* test(tab-group): assert the dragged tab moves between strips in the DOM
* fix(tab-group): hide strip actions whole instead of clipping their focus targets
Narrow strips clipped the new-tab, quick-command and pane-actions buttons
behind the 40px tab floor, so Tab could focus a control that was mostly or
entirely out of view. Measure the room left after the reserved spacers and
drop each control whole, and so out of Tab order, below the width where it
fits: quick commands first, then pane actions, then new tab (groups with a
tab only). Close split pane stays in every tab's context menu.
The e2e now measures only pixels that start a tab drag (not the close
button), drags from that run, and walks the strip with Tab at normal and
narrow widths, asserting every focused control is fully visible.
* fix(tab-group): offer quick commands from pane actions when the strip hides them
When a narrow strip folds the quick-command button away, the pane actions
menu now carries the same Quick Commands submenu the terminal and chat
menus use, so running or adding a command still works from the strip.
The narrow-strip e2e no longer sleeps or casts: it retries the first Tab
until focus lands in the strip, and a new test checks the menu offers quick
commands only when the button is hidden.
* fix(tab-group): drop the window-drag gap before strip controls clip
With the right sidebar closed, the 40px window-drag gap only shrank after
the tab bar hit its floor, so "+" and the actions clipped behind it while
the width rules said they fit. Hide the gap below the width where it and
every control fit, so the existing thresholds hold.
Adds an e2e that sweeps the top-right strip with the right sidebar closed
and asserts no focused strip control is clipped.
* refactor(ai-vault): group scanner modules by defining owner
* refactor(ai-vault): consolidate owner imports and isolate path absence
* Preserve mobile CI triggers for extracted absence predicate
* fix(computer): stop echoing written text and secure read-backs in action results
* fix(computer): treat a truncated set-value read-back as unverifiable
* fix(computer): accept code-point truncated read-backs as unverifiable
* feat(wsl): turn WSL hosts on by default; ORCA_INTERNAL_WSL_HOSTS=0, false, off or no turns them off
Co-Authored-By: Claude <noreply@anthropic.com>
* fix(wsl): review follow-ups for WSL hosts on by default
- Off words also match when quoted (cmd.exe's set NAME="0" keeps the quotes).
- The refusal now says WSL hosts are turned off for this launch, not missing from the build.
- New preload test pins when the renderer gets the WSL hosts API.
- Unit tests no longer inherit the gate state an Orca terminal publishes.
---------
Co-authored-by: Claude <noreply@anthropic.com>
* Tidy the Settings → Agents installed list
Rows line up on one line, the default agent gets a Default pill, and
Set as default moves into each row's ⋯ menu. Chat/CLI stays in place,
grayed out, when an agent is off. Click a row to expand its settings.
* Keep a saved default clearable when its agent isn't installed
The ⋯ checkbox follows the saved default, not the badge, so a saved
agent that isn't detected still shows Default and can go back to Auto.
Row hover uses the list-row accent token.
* Use plain items in the agent row's ⋯ menu
No checkmark column: Set as default, or Clear default agent on the saved
default, then Docs/Install aligned to the menu edge.
* test: remove 60 low-value cases and orphaned conversion fixtures
* docs(ci): list supported Windows SSH host cells
* test: recognize direct Windows orcad server entry
---------
Co-authored-by: OrcaWin <293788423+OrcaWin@users.noreply.github.com>
Neil
Kelvin Amoaba
Jinjingandalpenshtokk
OrcaWinandOrcaWin
Brennan Benson
mousepotato03