mirror of
https://github.com/stablyai/orca.git
synced 2026-09-28 08:02:43 +00:00
opencode-tui-issue
8
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
 Jinwoo Hong
|
e6aa90ff36 |
test(mobile): certify the browser pane's golden families and render it in a page (OTA phase C, C6.5) (#21777)
* test(mobile): pin the browser pane's golden families The half pin for C6: 4 families, 15 goldens, every verdict the one C2's rule predicts. Measured per family with vitest `-t` over the full 787-golden corpus, with C1's 103 reproduced golden-for-golden as the control: 6 byte-identical, 9 result-absent-settlement. No composed `c6-page-closure.ts`: a composed table is pinned against a route and the browser is a pane, so C7's route is what composes this with C1's. The derivation census does not wait for that route. `mobileWebAppRoute- Closure` becomes one case of `mobileWebAppModuleClosure`, which takes any entries, so the pane's own closure can be read from the module. Two cases: the pane alone reaches exactly the pinned four, and the pane beside `app/h/_layout` adds exactly those four and no other, with the layout reproducing C1's 22 as the control for the difference. Closure at this base: 48 local modules alone, 34 beyond the layout, 30 under `src/browser` and four through the web siblings. The design said 23, all under `src/browser`; it was measured before C6.2 and C6.3 added those siblings, so the pin carries the re-measured number. `browser.screencast` has no golden at all, so this certifies the input path and says nothing about the frame path. Red first: with `browser.wheel` dropped from the table, both census cases fail naming the missing family; restored, the file's 10 cases pass and the parity suite reports "15 goldens in 4 families, 6 byte-identical". Claude-Session: https://claude.ai/code/session_01JNnE9qzUZMMnqpZWCqM3nb * test(mobile): pin the frame budget against the shell's real frame Ruling 2's pin. `binaryEventEnvelopeBytes()` sizes the mobile view's device scale from a skeleton it builds itself, and until now its only check was another skeleton of the same shape in the same file: two copies of one assumption agreeing with each other. This measures the real thing. A frame with CDP's nine metadata fields and a real `Page.screencastFrame` timestamp, encoded by C6.1's `encodeBridgeScreencastFrame` and serialized by the real `BridgeHostSubscriptions`, posted through the host harness: 303 bytes besides the image, against a bound of 516. Held above is not enough on its own — 213 bytes of slack is room for the shell to grow the envelope by a field the page never hears about — so the bound is reconstructed exactly instead. Every byte of that slack is a number this frame prints narrower than a double can; adding those back gives 516 on the nose. The budget cases run a generated noise image at the budgeted scale, not a committed fixture: the worst case is the image JPEG compresses least, and a photograph sits a tenth of the way to it. 901,161 px at 0.545 bytes per pixel is 491,132 bytes, which the shell posts at 654,857 of the 655,360-byte cap. One envelope more and the shell drops it, which is ruling 1 read from the budget's side. Red first, two ways. Drop the metadata widening from the bound and three cases fail, the sharpest being the real shell answering the frame the page thought it could send with zero posts. Add a field to the shell's own envelope and the reconstruction fails at 516 against 548, where the existing suite stays green on all 14 — which is the drift this file exists for. Claude-Session: https://claude.ai/code/session_01JNnE9qzUZMMnqpZWCqM3nb * docs(mobile): record the measured frame bytes, correcting |
||
|
Jinwoo Hong
|
b6e8b1a7b2 |
feat(mobile): serve the tasks screen from the page, with its seams (OTA phase C, C2.1 + C2.5) (#21694)
* fix(mobile): encode the host id in the tasks workspace-creation href (OTA phase C, C2.1)
`use-mobile-tasks-workspace-create-actions.tsx` built
`/h/${hostId}/session/...` with the host id interpolated raw — the C1.2 class.
A host id carrying `/`, `#`, `?` or whitespace reaches the wire as an href
`BRIDGE_ROUTE_HREF_PATTERN` refuses, the handoff falls through to the local
router, and expo-router's Unmatched paints over the page.
Deleted rather than patched: `hostNewWorktreeSessionRoute` already builds
this exact href with both segments encoded, and already has the test that
pins it. The screen now calls it.
The census that caught it stays: no module under `src/tasks` may interpolate
into `/h/${...}` without encoding, which is the rule rather than this one
line. Three refactor-parity hashes move with the statement change and are
recorded in that file the way every earlier movement is.
Claude-Session: https://claude.ai/code/session_01JNnE9qzUZMMnqpZWCqM3nb
* feat(mobile): route the tasks tree's external links through the seam (OTA phase C, C2.1)
Ten of the twelve call sites in the tasks page closure: the nine under
`src/tasks`, swapped by one export in the dependency barrel, and
`MobileMarkdown.tsx`, which imports react-native directly and is edited in
place.
Inside the shell's WebView react-native-web's `openURL` calls
`window.open(url, '_blank')`, which both shells refuse — iOS returns nil from
`createWebViewWith`, Android false from `onCreateWindow` — and resolves
regardless. Every one of these sites would have reported success into a tap
that opened nothing.
The barrel's `Linking` is typed `{ openURL: (url: string) => void }`, so a
`.catch` on it is a compile error rather than a handler for a rejection that
cannot arrive; the seam names its own failures. `MobileMarkdown`'s own
`.catch(() => {})` goes with the swap for the same reason.
No parity hash moved: the barrel and `MobileMarkdown` are outside the
refactor-parity family's source set.
Claude-Session: https://claude.ai/code/session_01JNnE9qzUZMMnqpZWCqM3nb
* feat(mobile): route the shared screens' external links through the seam, with a census (OTA phase C, C2.1)
The last two of the twelve call sites in the tasks page closure:
`ProtocolBlockScreen.tsx` and the `openExternalUrl` prop wiring at
`host-screen-overlays.tsx`.
Both are shared with native routes and with the already-live `/h/[hostId]`
page, so this changes that page too: its external links go from the measured
`window.open` no-op — which both shells refuse and which resolves anyway — to
a URL handed to the shell. Nothing changes on a phone, where the seam is
`Linking.openURL` unchanged.
The `openExternalUrl` prop chain is retyped `(url: string) => void` with it,
and `SmartWorkspaceSourceField`'s `.catch(() => {})` goes: the seam names its
own failures and never rejects, so that was a handler for a rejection that
cannot arrive.
The census is the rule rather than today's twelve sites: no module in the
tasks page closure may reach react-native's `Linking`, by name or through a
namespace import. It reads the closure from a new builder export —
`metafile.inputs` for `_layout` plus the route, which is one definition of
what a page contains — and checks which module the name comes from, not which
text a call site writes, since the tasks tree still calls `Linking.openURL`
and that `Linking` is now the barrel's seam-backed export. Confirmed to
discriminate: restoring one react-native import turns it red.
A second case pins that the seam is in the closure, so an empty offender list
cannot also mean a page that reaches no link code at all.
Claude-Session: https://claude.ai/code/session_01JNnE9qzUZMMnqpZWCqM3nb
* feat(mobile): write the tasks clipboard through the shell's verb (OTA phase C, C2.1)
The two `Clipboard.setStringAsync` sites in the tasks page closure move onto
a seam, `src/platform/clipboard.ts` with a `.web.ts` sibling, registered in
the overrides.
A hook rather than a function because the web form needs the page's bridge
client, which is React context. Native is `expo-clipboard` unchanged. Web
calls `native.clipboard.write` through `useNativeVerbs`, because
`expo-clipboard` on the web is `navigator.clipboard` and needs a secure
context: the iOS shell serves the page from a custom scheme and Android from
`https`, so that path would work on one platform and silently not on the
other, with nothing at the call site able to tell.
Both seams reject rather than return false, and both call sites already wrap
the write in a `catch` that puts the message on screen — so a write that did
not land says so instead of showing "Copied". A route that has not declared
`native.clipboard.write` is refused before a frame is sent and lands in that
same `catch`; the route declares it in the entry commit.
Two parity hashes move, the hook list and the statement hash, each by one
entry, and are recorded in that file. `semantics` holds, as do render and
style: no RPC call, method literal or JSX host signature changed.
Claude-Session: https://claude.ai/code/session_01JNnE9qzUZMMnqpZWCqM3nb
* feat(mobile): hand the tasks Back button to the shell (OTA phase C, C2.1)
The tasks header's `router.back()` reached expo-router through the dependency
barrel, and inside the page that moves nothing: the document holds the single
history entry the entry wrote with `replaceState`. The stack with somewhere
to go is the native one the shell pushed the page onto.
One line in the barrel, as with `Linking`: `useRouteHandoff` is router-shaped,
so every call site is unchanged. On a phone it is expo-router. Inside the page
it keeps a route the page renders and posts `navigate-back` for a Back the
document cannot serve — the C2.2 seam, which until now had no consumer.
No parity hash moved: the barrel is outside the refactor-parity source set,
and no call site changed.
Claude-Session: https://claude.ai/code/session_01JNnE9qzUZMMnqpZWCqM3nb
* feat(mobile): render mermaid as its own source box on the web (OTA phase C, C2.5)
`MermaidDiagram` is in the tasks page closure, reached through
`MobileMarkdown`, and it renders the diagram inside a sandboxed `WebView`.
`react-native-webview` is a native component with no browser counterpart:
importing it runs a codegen lookup that throws, and the route manifest imports
every route, so one such import takes the whole page down rather than one
diagram.
The web sibling renders the labelled source box the native component already
falls back to on a parse or render error, with that component's own styles, so
the degradation looks like a state the product already has rather than a
second design.
Not a browser renderer, and the reason is not reach: mermaid is a browser
library and the engine bundle is vendored. It is that the native path's safety
comes from the WebView it runs in — `buildHtml` escapes `</script>` and the
U+2028/U+2029 separators because diagram source is untrusted agent and PR
content — and a DOM path has no such sandbox, so it needs its own escaping and
its own proof. That is a change of its own, not a smaller version of this one.
Registered in the overrides, whose gate fails on an unlisted `.web.*` file.
Claude-Session: https://claude.ai/code/session_01JNnE9qzUZMMnqpZWCqM3nb
* feat(mobile): turn the tasks route on for the page (OTA phase C, C2.1)
The entry: `/h/[hostId]/tasks` joins `MOBILE_WEB_PAGE_ROUTES`, the route file
becomes the shell's flag switch in `index.tsx`'s shape, and a `.web.tsx`
sibling renders the screen directly, registered in the overrides.
The screen moves to `src/tasks/MobileTasksScreen.tsx` first, verbatim — body
byte-identical, imports rewritten to `./`. It has to: under the builder's
`resolveExtensions` a web sibling importing `./tasks` resolves back to
itself, which is why every other shell route's screen already lives in `src`.
The parity family follows the file rather than the path. `TASKS_ROUTE` leaves
`MOBILE_TASKS_SOURCE_FILES` — `SOURCE_PATTERN` already matches
`MobileTasks*.tsx`, so listing it too would double-count — and the execution
reader points at the new file. Measured rather than predicted: all six
refactor-parity cases pass unchanged. No hash moved, including the family
text and declaration list, because the new name sorts where the route path
sat.
The route declares `navigate`, `storage`, `externalLink` and
`native.clipboard.write`, which the grammar fold made expressible and
per-route scoping makes meaningful: it is granted those and not the rest of
what this shell implements.
The browser check covers what only a browser answers — every module in the
closure evaluating under React Native Web, `taskSource` surviving the
handshake into the page's own URL, and the route's chunk arriving on a
client-side navigation. It states plainly what it does not cover: the three
seams are reached from controls that need provider data the double does not
serve, so a case posting those frames directly would prove the transport and
read as a tap it never performed. Both new checks join the `mobile_web_app`
job.
Claude-Session: https://claude.ai/code/session_01JNnE9qzUZMMnqpZWCqM3nb
* fix(config): resolve a route closure the way the bundle ships it (OTA phase C, C2.1)
`mobileWebAppRouteClosure` took the route's explicit `.tsx` path as an entry
point, so esbuild used that file directly and `resolveExtensions` never ran.
For a route with a `.web.tsx` sibling that measured the native switch, which
no browser loads: the tasks closure came back carrying
`MobileWebShellScreen`, and with it a `Linking` import the census then
reported as an offender.
Extensionless now, so the closure is the one the page actually contains:
3775 modules, 428 local, with `external-link.web.ts` and `clipboard.web.ts`
in it and the shell screen out.
The route-manifest pins move with the tasks route joining
`MOBILE_WEB_PAGE_ROUTES`, in both the declaration check and the built
manifest.
Claude-Session: https://claude.ai/code/session_01JNnE9qzUZMMnqpZWCqM3nb
* fix(mobile): cover the clipboard seam, close two page escapes, share the mermaid props (OTA phase C, C2.1)
Four from round 1.
The clipboard seam shipped untested. Both halves have one now: the native
form rejects when `setStringAsync` answers false and resolves when it does
not, and the web form is driven through the real port pair — resolving on a
reply, rejecting when the shell says the pasteboard refused, and rejecting on
an ungranted route without putting a frame on the wire.
The tasks barrel still re-exported `expo-clipboard` with no consumer, which
kept `ExpoClipboard.web.js` — the `navigator.clipboard` path this series
exists to avoid — inside the page closure. Deleted, and asserted as the
module's absence from that closure rather than as a count of importers: a new
import puts the file back whoever writes it.
`ProtocolBlockScreen` reached expo-router's singleton for its way out to the
host list. A singleton is the one shape the handoff cannot intercept — it is
not a hook, so the page's bridge client is never consulted — and `/` is a
route the page does not carry, so inside the shell that replace rendered the
root route in the WebView instead of leaving it. Pre-existing and live via
`/h/[hostId]`; routed through the handoff now. Two suites' `expo-router`
mocks gain the hook the handoff reads.
`MermaidDiagram.web.tsx` redeclared its props; it imports the native
component's type, so drift fails tsc.
No parity hash moved: none of these files is in the refactor-parity source
set.
Claude-Session: https://claude.ai/code/session_01JNnE9qzUZMMnqpZWCqM3nb
* style(config): use endsWith for the clipboard module check
The changed-code gate refuses a dollar-anchored regex where `String#endsWith`
says the same thing. No behaviour change.
Claude-Session: https://claude.ai/code/session_01JNnE9qzUZMMnqpZWCqM3nb
* fix(mobile): close the href census gap, read route params through firstParam (OTA phase C, C2.1)
Five from round 2, two of them real.
The raw-interpolation census inspected only the leading `${...}`, so
`` `/h/${encodeURIComponent(hostId)}/session/${worktreeId}` `` passed it — and
a worktree id carrying `/`, `#`, `?` or whitespace breaks the href exactly as
a host id does. It now refuses any hand-built `/h/...` template with any
interpolation left raw, whichever segment it is. Proved against exactly that
shape in a throwaway before the change, which the old rule admitted.
The tasks switch read `hostId` and `taskSource` as plain strings. expo-router
hands back an array for a repeated query key, so a duplicate `?hostId=` built
`/h/host-a%2Chost-b/tasks`; both go through `firstParam` now, as the
agent-history switch does. `index.tsx` is untouched, per the Phase D list.
Three in the render check's prose: the header claimed the browser proves the
three seams fire from a tap, which the file's own closing note denies; a
module count repeated a number the closure test already pins; and a `replies`
parameter was threaded through without ever being supplied.
Claude-Session: https://claude.ai/code/session_01JNnE9qzUZMMnqpZWCqM3nb
|
||
|
Jinwoo Hong
|
428558b941 |
fix(mobile): let the shell's page paint a file preview (OTA phase C, C3.0) (#21591)
* fix(mobile): let the shell's page paint a file preview A file preview has one shape on the wire: the desktop answers a base64 body and `normalizeMobileFilePreviewResult` composes `data:<mime>;base64,<content>` for React Native Web's `Image`. Under `img-src 'self'` the browser refuses to load it, so every image preview in the page paints nothing — reproduced in the render check, which logged the refusal naming `img-src 'self'` before this. `data:` is granted to images and to nothing else, so what it admits is what the page itself composed out of a reply it already holds; `script-src 'self'` and `connect-src 'self'` are untouched, and `blob:` is not added because nothing in the closure needs one. Both platform pins narrow from "the header contains no `data:`" to "`data:` appears on `img-src` and nowhere else", which is the check that still fails if a later directive grows one. Claude-Session: https://claude.ai/code/session_01JNnE9qzUZMMnqpZWCqM3nb * docs(mobile): say what the data: image case actually loads through Round 1 is right on both counts. In react-native-web 0.21.2 the hidden <img> the Image component renders carries `alt`, `style`, `draggable`, `ref` and `src` and no load handlers at all — it is there for the browser's image context menu and for `getBackgroundSize()`. The load signal comes from `ImageLoader.load`, which is `new window.Image()` with `onload`/`onerror` on it, so the `new Image()` in this case is the same mechanism the screen's own load runs through rather than a stand-in for it. And the screen maps `onImageError` to "Unable to load preview" (`MobileFilePreviewScreen.tsx:282`); "Binary preview unavailable" is the normalizer's `binary_file` branch, which a CSP refusal never reaches. Comment only. No assertion moves. Claude-Session: https://claude.ai/code/session_01JNnE9qzUZMMnqpZWCqM3nb * docs(mobile): state the img-src data: bound as the destination, not provenance "admits only what the page itself built" read as a provenance guarantee, and CSP has none to give: `data:` is matched as a scheme, so the directive admits any `data:` image URL and the browser cannot tell one the page composed from one it was handed. Nor is the content the page's own — the mime type and the base64 body both come from the host, and `normalizeImagePreviewResult` only checks the mime type is a non-empty string. The true bound is where the URL goes: it is never fetched as anything but an image, `img-src` is the only directive admitting it, an image fetch executes nothing (an SVG inside an `<img>` runs no script), and `script-src 'self'`, `connect-src 'self'` and `object-src 'none'` are untouched. Both copies reworded identically, since they are kept in step by the render check's own policy comparison. Claude-Session: https://claude.ai/code/session_01JNnE9qzUZMMnqpZWCqM3nb |
||
|
Jinwoo Hong
|
edd9e3125b |
fix(mobile): give the page its height and its long press; C1.7 device proof (OTA phase C, C1.9) (#21589)
* fix(mobile): give the Route A document the height its mounted tree measures against (OTA phase C, C1.9) The document this builder emits carries no stylesheet, so `html`, `body` and `#root` have no height, and every box react-native-web lays out below the mount is `flex: 1` against a parent that measures 0. The collapse is silent in every check that existed: the entry stamps `mounted`, the route tree commits, `innerText` holds every row, and the accessibility tree reports each one at the offset it would have had. Nothing is painted below the header, and nothing takes a tap — the list sits inside a scroller the collapse clipped, and a phone reads it to VoiceOver while no row responds. Lane C1.7 found it on both an iPhone 17 Pro simulator and a Pixel 9 Pro emulator, and the same bytes reproduce it in headless Chromium. The fix is the reset Expo's own web template ships for a react-native-web root, emitted inline because the shell's CSP already allows `style-src 'unsafe-inline'` for the sheet react-native-web injects at runtime; a linked asset would paint the collapsed layout until it landed. The render check gains the assertion that would have caught it: the root's box measured against the viewport, and the one control this route paints with no RPC answered — the New Workspace button, positioned against the bottom of the root, which the collapse moved to y = -72 — asked for by `elementFromPoint` at its own centre. Laid out is not reachable, so the check is a hit test and not another read of the DOM. Without the reset it fails `expected +0 to be 844`. Claude-Session: https://claude.ai/code/session_01JNnE9qzUZMMnqpZWCqM3nb * fix(mobile): let the page have the long press WebKit was taking (OTA phase C, C1.9) The shell's WKWebView is built with the default text interaction, so WebKit installs its selection assistant over the page. A hold on a worktree row raises the selection loupe over the row's own text and the touch is cancelled before the page's responder sees it, which leaves every long-press action in the page dead on iOS while a tap works. Lane C1.7 measured it: the same injected hold opens the row action sheet on the native list and on the page in the Android WebView, and does nothing in the page on iOS. It is not the document's to fix, which the device disproved one rule at a time: `-webkit-touch-callout: none`, `-webkit-user-select: none`, and both together all left the loupe and left the hold undelivered, and headless Chromium confirms the property computes to `none` on the page's text, so the CSS reaches it and WebKit's own gesture wins anyway. The cost is real and named here rather than discovered later: the page has no text selection on iOS, so selectable `Text` — markdown, diff rows, file preview, chat — cannot be selected there until a page-side copy affordance exists. Everything the shell already forbids is unchanged, and Android is untouched. No unit test: the module's Swift checks compile the seven WebKit-free logic files and never import WebKit, so a `WKWebViewConfiguration` cannot be built in them. The device proof stands in. Claude-Session: https://claude.ai/code/session_01JNnE9qzUZMMnqpZWCqM3nb * fix(mobile): make the root reset the template's bytes, not a copy with an addition The comment said the reset is what Expo's web template ships, and `margin:0` was not in it. `@expo/cli@55.0.36/static/template/index.html` carries height, `overflow` and the root's flex box and nothing else, and react-native-web emits `body{margin:0}` in the sheet it injects at runtime, so the addition only covered the frames before that sheet landed. Nothing pinned it either: removing it left all 60 tests green, which is the other way of saying it was never load-bearing. Dropping it makes the string one thing with one source instead of a copy to keep in step with two. The pins on the rest of the reset are unchanged, and so is the frame that mattered: the root still has a definite height before the first paint, which is what the collapse needed. Claude-Session: https://claude.ai/code/session_01JNnE9qzUZMMnqpZWCqM3nb * style(mobile): format the render check with the root formatter `config/scripts` is formatted by the root oxfmt, not mobile's, and CI checks neither, so a 102-char line I added sat over the root's `printWidth: 100` with nothing to catch it. Reflowed by `./node_modules/.bin/oxfmt --write` from the repo root; no behaviour change. Claude-Session: https://claude.ai/code/session_01JNnE9qzUZMMnqpZWCqM3nb * docs(mobile): say what the root reset shares with Expo's template, not that it is its bytes "The bytes Expo's web template ships" is false and checkable: the template's own block is pretty-printed with comments and trailing semicolons at 410 bytes, and this string is 112. What is actually true, and what the next reader needs, is that it carries the same declaration set and the same `id="expo-reset"`, minified. Claude-Session: https://claude.ai/code/session_01JNnE9qzUZMMnqpZWCqM3nb * test(mobile): pin every rule of the root reset, not two substrings of itself The check read the constant back against itself: `toContain(MOBILE_WEB_APP_ROOT_RESET)` plus two substrings taken off that same constant. A rule dropped from it took the assertion with it, so `body{overflow:hidden}`, `flex:1` and the `expo-reset` id were unpinned — and the render check stays green without the overflow rule, so nothing else held them either. Each rule is now a literal written here, named one at a time so a failure says which one went, and the id is pinned beside them. Verified red-first: removing the overflow rule, the `flex:1`, or the id each fails this test and only this test. Claude-Session: https://claude.ai/code/session_01JNnE9qzUZMMnqpZWCqM3nb |
||
|
Jinwoo Hong
|
e2afb5eef9 |
feat(mobile): the page reads this host and keeps the app's pins (OTA phase C, C1.4) (#21503)
* feat(mobile): the page mounts on the shell's init, with the client injected (OTA phase C, C1.1) The Route A entry built no client and mounted the route tree immediately, so the web provider minted its own: it read the page channel, built `BridgeRpcClient` and fell back to a placeholder that rejected every call. A tree that mounts before `init` reads synchronous getters against a client that knows no host, no state and no build, and the first render it records is the wrong one. The entry now owns the page's one client. It builds it from the channel at module scope, mounts nothing until `onReady` fires, and stamps the session and build ids `getShellSession()` returns on the document beside the mount state, so a screenshot, the render check and a device console read the same three facts. `client-context.web.tsx` takes that client by injection and serves it from `acquire()` for every hostId, because the bridge protocol names no host; the placeholder and its `BridgeTransportUnavailableError` are gone, along with the entry that pointed at them in the unvalidated-port inventory. A document with no channel is not inside the shell, so it says `unbridged` and stops rather than waiting out a backoff nobody answers. The render check gains a shell double that answers `ready` with `init`, reads the stamped session back off the document, and proves the gate is real by opening the same route with no double and finding an empty `#root`. Claude-Session: https://claude.ai/code/session_01JNnE9qzUZMMnqpZWCqM3nb * feat(mobile): the shell names the screen, and the page routes to it (OTA phase C, C1.2) The shell serves its document at `/` and refuses every other path, so the page's own location matches no route in the tree it carries and expo-router paints Unmatched. Nothing in the document can tell it otherwise, so the screen has to cross the bridge. `init` gains an optional `route: { pathname, params }`. The pathname is held to what a path may be rather than to what a screen may want: rooted, single-slash, no query and no fragment. A protocol-relative `//host` would make `history.replaceState` throw a cross-origin SecurityError and take the mount down with it, and the params are a field of their own so neither side parses a URL. The shell route supplies it, the screen passes it to B4's hook, and the hook holds it for the life of one host: the page routes once, before its first render, so a route that changed afterwards has nothing left to change. The page writes that URL into its history and then mounts. It also hands the same URL to `ExpoRoot` as its `location`, because `ExpoRoot` snapshots `window.location.href` when its module is imported, which is before any frame has crossed the bridge: without it the router reads the `/` the shell served and replaces the page's own path right back. A shell too old to name a route leaves the page with nothing to open, so it paints a panel saying to update the app, built as elements outside React because the route tree is exactly what cannot mount there. Both platforms stop reading the document's URL to decide a load finished. The page rewrites its own path before its first render, so a document that committed at `/` reports finishing at `/h/<hostId>`; reading the path withheld `ready` forever and left the Android WebView hidden behind it. What is left is whether the load committed, which is the question the state machine already answers. Claude-Session: https://claude.ai/code/session_01JNnE9qzUZMMnqpZWCqM3nb * feat(mobile): the desktop lists a page route, the shell honours it or stays native (OTA phase C, C1.3) The worktree list now renders from the desktop's bundle, and which routes do is negotiated rather than decided on one side. The manifest gains `routes: [{ pathname, grants }]`, written from one declared list the builder checks against the tree it bundled, so a declaration naming a screen with no module fails the build instead of reaching a phone as a page that paints Unmatched. The field is additive because the phone reads the manifest loosely and pins no schema version; the desktop's own writer stays `.strict()`, and the stale comment saying there was no additive path is corrected. The shell answers for what it can do. A route the bundle does not list, or lists needing a grant this app does not implement, settles as `native-route` and downloads nothing; so does a desktop that ships no bundle at all, which is the one blocked verdict that is not a wall, because a desktop with no bundle declares no page route and there is no workspace to refuse. The route is answered before the compat verdict for the same reason: a bundle this shell cannot open is not a reason to refuse a screen it was never going to open. `app/h/[hostId]/index.tsx` mounts the shell when the flag is on and takes the native list back as the fallback, and both routes read the flag through one hook so the census stays the whole census. A tap on a worktree row still opens the native session screen. The page posts `notify { name: 'navigate', href }` behind the `navigate` grant, which is not a convention: `notify` is a closed union, so an older shell refuses the whole frame and the page checks the grant before it posts. The shell pushes the target over the still-mounted view, so Back reveals the page with nothing reloaded. `route-handoff.ts` and its web sibling are the seam, router-shaped so the list's own hook and the recorder's adapter are untouched and no golden moves: the web file wraps the three members that leave the document and hands back any target outside the page routes `init` named. Claude-Session: https://claude.ai/code/session_01JNnE9qzUZMMnqpZWCqM3nb * feat(mobile): the page reads this host and keeps the app's pins (OTA phase C, C1.4) Three gaps the census named, and the last of them is why the page needed a second grant. `expo-secure-store` is `{}` on web, so the page's own `loadHosts()` answered with an empty array and the list painted "Host not found" over the host the shell had just opened it for. `init` gains an optional `host`, and `host-store.web.ts` serves it: the profile the screens read, with no device token and no public key, because the bridge already carries the connection those would have opened. The native writes it cannot make — pairing, renaming, recency — settle rather than throw, since recency orders a list the page never shows. AsyncStorage's web build is `window.localStorage`, and the page has none worth having: Android turns DOM storage off and on iOS the origin host is the session id, so a pin set in the page was gone on the next remount. The builder aliases the module to a page store whose values are the app's own — `init` primes the allowlisted keys, a write is applied locally and posted over a new `storage` grant, and the app is where it lands. The allowlist is two keys and is the whole fence: everything the app stores shares one namespace, the hybrid shell flag included, so a page that could write any of it could turn the feature on for a build that never offered it. A key outside the list is refused and, crucially, not kept locally either — a pin that looks set and is not is the failure the grant exists to avoid. The bridge host is built only once both have been read, because `init` is answered once per `ready` and carries them: a host that started without them would have to be torn down to carry them, and the list would already have mounted against a host it could not name. `Alert.alert` on a failed host removal is a silent no-op in React Native Web, so inside the page that failure had no surface at all. It routes to the error the list already shows, on both platforms. Claude-Session: https://claude.ai/code/session_01JNnE9qzUZMMnqpZWCqM3nb * feat(mobile): the page can tell the shell it faulted (OTA phase C, C1.1) A page that throws where it renders has nowhere to report it: the shell sees a document that loaded and a view that never painted, so it waits on a blank page forever. This adds the one frame that says so. `notify { name: 'fault' }` carries the capture an `error` frame already carries, so both directions share one bound and one reader. It rides a grant because `notify` is a closed list on both sides: a page served by a newer desktop into an older shell would have the whole frame refused, so the page asks `init.grants.native` first and stays quiet on a no. The shell answers it as `document-load-failed`, which is what happened. That reason drops the generation and downloads once, so a page broken by bytes this host has since replaced recovers, and one broken by its own code stops at the failure screen rather than a blank one. Claude-Session: https://claude.ai/code/session_01JNnE9qzUZMMnqpZWCqM3nb * refactor(mobile): give the bridge's notifications and the host's errors their own modules The fault report took both files over the 300-line cap, so each gives up the group that was already separable. The page's one-way members move to `bridge-client-notifications.ts`, which is also where the two policies that split them can be stated: the two the native contract declares throw before a session, and the fault report never throws at all. The host's three error classes move to `bridge-host-errors.ts`, the mirror of the page's own `bridge-client-errors.ts`. No behaviour changes. The commit before this one is over the cap on its own, which a forward-only history is the reason to say rather than hide. Claude-Session: https://claude.ai/code/session_01JNnE9qzUZMMnqpZWCqM3nb * feat(mobile): one boundary under the page's root, reporting to the shell (OTA phase C, C1.1) Nothing in `app/h/**` exports an `ErrorBoundary` and `ExpoRoot` provides no global one, so a throw while a route renders — or a route module that rejects once the manifest is lazy — unmounts the tree and leaves a blank document. The shell sees a load that finished and waits on it forever. The entry now wraps what it mounts on `init` in one boundary that posts the throw over the bridge. Above `ExpoRoot`, not inside its wrapper: a route that cannot be resolved throws where the router renders it, and a boundary below the router never sees that. It renders nothing and offers nothing to press. The generation is on disk and was hash-checked before the view loaded it, so the same bytes throw again and a retry here would only throw twice; recovery belongs to the shell, which drops the generation on the report. The render check now grants the fault and collects what the page posts into the errors every case already asserts empty, because a throw the boundary caught paints nothing and logs nothing a `pageerror` listener would hear. Claude-Session: https://claude.ai/code/session_01JNnE9qzUZMMnqpZWCqM3nb * fix(mobile): write the page-fault callback ref after the commit, not during render React may replay or discard a render, so the write belongs in the commit phase. Layout, not passive, and declared above the host's effect: a native frame can arrive between a commit and a passive effect, and the host must already hold this render's callback. Claude-Session: https://claude.ai/code/session_01JNnE9qzUZMMnqpZWCqM3nb * fix(mobile): write the route ref after the commit, not during render Same class as the page-fault ref: render must stay pure because React can replay or discard it. Folded into the one commit-phase effect above the host's. Claude-Session: https://claude.ai/code/session_01JNnE9qzUZMMnqpZWCqM3nb * fix(mobile): write the page-route and navigate refs after the commit Same class again: the last two writes this branch adds join the commit-phase effect, so nothing this hook holds is written while React is rendering. Claude-Session: https://claude.ai/code/session_01JNnE9qzUZMMnqpZWCqM3nb * fix(mobile): write the storage-write ref after the commit The last render-phase ref write in this hook joins the commit-phase effect. Claude-Session: https://claude.ai/code/session_01JNnE9qzUZMMnqpZWCqM3nb * fix(mobile): name the confirm setter this callback already calls in its deps A `useState` setter is stable, so the identity of the callback is unchanged; the list now says what the body reads. Reported on the line this branch rewrote. Claude-Session: https://claude.ai/code/session_01JNnE9qzUZMMnqpZWCqM3nb * test(mobile): take the boundary test to C0.5's fake-client pair `createBridgePortPair` is generic over the shell client now; the fake-client form this test wants is `createFakeBridgePortPair`. Claude-Session: https://claude.ai/code/session_01JNnE9qzUZMMnqpZWCqM3nb * feat(mobile): bound the wait for a page that never says a word (OTA phase C, C1.1) A route module that throws while the bundle is evaluated takes the entry with it. The document still commits and the WebView still reports it loaded, but no boundary mounts, no fault is posted and no frame is ever sent, so the session sat in `ready` behind a blank view forever. The native view's finished load starts a clock; the page's first `ready` stops it; expiry is `document-load-failed`, which deletes the generation and fetches once. Nothing cancels the timer — a `ready` that lands first makes the expiry a no-op — so the runner owns a clock and the reducer owns every decision. Claude-Session: https://claude.ai/code/session_01JNnE9qzUZMMnqpZWCqM3nb * test(config): make a route chunk throw, so the render check proves the boundary reports The check folded page faults into its errors but nothing ever produced one, so a boundary that stopped reporting would have stayed green. The server now serves one real route chunk with a throw in front of it: the module still links, so the failure is an evaluation throw where the router renders, which is exactly what the boundary is for. Claude-Session: https://claude.ai/code/session_01JNnE9qzUZMMnqpZWCqM3nb * fix(mobile): make the host enforce the grants it issued, and hear nothing before ready `forwardNotify` acted on any frame that parsed, including a `fault` from a page that had never asked for a session and therefore held no grant. Both refusals now go through one rule the host shares with the frame it sends, so the list a page is told about and the list it will be served cannot drift. Inert while every page is offered `fault`; the ungranted arm is what C1.3 needs the moment a grant belongs to a route rather than to the protocol. Claude-Session: https://claude.ai/code/session_01JNnE9qzUZMMnqpZWCqM3nb * fix(mobile): refuse a route no page can open, rather than blanking the WebView (OTA phase C, C1.2) `sendInit` put `options.route` straight on the wire and only the page's decoder checked it, so an out-of-contract pathname made the page refuse the whole `init`, ask again on its 2 s backoff forever, and the shell un-hide a view that would never paint. The only trace was a `console.warn` inside the WebView. Three changes, one failure mode. The host parses the route at construction and serves no session at all when it will not do, reporting it as a shell failure. The pathname rule refuses empty segments, dot segments and backslashes anywhere, because `replaceState` normalises `/../../etc` to `/etc` and `/h/a\b` to `/h/a/b` and the page then renders whatever came out. And the producer encodes the host id it interpolates, which is how one carrying a query, a fragment or whitespace got there. Claude-Session: https://claude.ai/code/session_01JNnE9qzUZMMnqpZWCqM3nb * fix(mobile): make a handoff mean the shell took it, not that a frame left (OTA phase C, C1.3) `handOff` returned `client.notifyNavigate(href)`, which answers whether the frame left the page and never whether the shell accepted it. Two hrefs the app builds today were posted, answered true and suppressed the local fallback, so the tap did nothing at all: the Connection-log link's object form, which `String` turns into `[object Object]`, and any href carrying a fragment, because the pathname is stripped to match and the whole href is what goes on the wire. Object hrefs now resolve the way the router resolves them, and the string is checked against the envelope's own pattern and cap before it is posted; anything that fails falls through to the local router, which is the policy this module already states. Whether a target names a screen that exists is shape's business no longer, and the comment says C1.7 owns it. Claude-Session: https://claude.ai/code/session_01JNnE9qzUZMMnqpZWCqM3nb * fix(mobile): keep a failed action off the whole screen and the page's store honest (OTA phase C, C1.4) Five, from one round of review. A removal that fails no longer writes the identity error: that one is an early return over the header, the list and the overlays, with nothing to dismiss it and nothing left to render the confirm it re-opens. It goes to a dismissible line above the list instead, on both platforms, cleared by the next confirmed refresh. `init` reads the allowlisted keys on every answer rather than capturing them at mount, so a document that reloads inside one mount is primed from after its own writes. The read stays synchronous: the page refuses every member until `init` lands and the golden recorder mounts a screen in the same turn it drains one, so a promise here moves the first render of every bridged replay. A profile read that rejects is now a shell failure with a diagnostic instead of a `ready` session with no host behind it and a page asking forever. The page bounds a value by the envelope's own constant rather than caching what the wire drops. And a write is held to the keys this page was handed, so one host's page cannot rewrite another's pinned list. Claude-Session: https://claude.ai/code/session_01JNnE9qzUZMMnqpZWCqM3nb * test(mobile): state the two test fixtures' types instead of asserting them The casting gate reads a `SAFETY:` rationale off the line directly above the assertion, and a wrapped comment puts a comment there instead. Two of the four were not assertions worth keeping at all: a hoisted fixture says its own type, and the router comes from the mock the file already installs. Claude-Session: https://claude.ai/code/session_01JNnE9qzUZMMnqpZWCqM3nb * test(mobile): assert the two fixtures in place, not through a widened binding `const x: unknown = …` followed by `x as T` is the widen-then-assert the anti-slop gate refuses, and rightly: the evidence is discarded and then invented again. The assertion belongs at the literal, with its rationale on the line above it. Claude-Session: https://claude.ai/code/session_01JNnE9qzUZMMnqpZWCqM3nb * fix(mobile): start a new flow when the shell view remounts A remount cleared `pageReady` but left the flow alone, so the wait the retired document armed still matched. It expired onto the page that replaced it, took a ready workspace to `document-load-failed`, and deleted the generation on the way. Claude-Session: https://claude.ai/code/session_01JNnE9qzUZMMnqpZWCqM3nb * fix(mobile): say which page notification the bridge refused and why A refused `notify` fell through to the line about a view outliving its host, which is a different fault and names neither the notification nor the reason. The two refusals now get a line each, so a page that was told nothing cannot bury one reaching past what it was told. Claude-Session: https://claude.ai/code/session_01JNnE9qzUZMMnqpZWCqM3nb * test(mobile): pin the ready deadline to the page's own retry ceiling The margin was stated in a comment and asserted against itself, so changing either number left the suite green. Claude-Session: https://claude.ai/code/session_01JNnE9qzUZMMnqpZWCqM3nb * fix(mobile): say what was wrong with the screen a refused shell named C1.1's per-kind log lands on a branch that also refuses a route, and that diagnostic was still falling through to the line about a view outliving its host. It names the shell's own bug now, and carries the issue. Claude-Session: https://claude.ai/code/session_01JNnE9qzUZMMnqpZWCqM3nb * fix(mobile): refuse a dot segment however the route spells it A URL parser percent-decodes a path before it resolves it, so `/h/%2e%2e/x` climbed out of the `/h/` prefix exactly as `/h/../x` does and landed the page on a screen nobody asked for, with no refusal anywhere. The one segment rule both patterns share now reads the encoded spellings as the dot segments they are, and still lets an escape inside a name through. Claude-Session: https://claude.ai/code/session_01JNnE9qzUZMMnqpZWCqM3nb * test(mobile): name routes in the manifest field list the builder emits C1.3 added `routes` to every manifest this builder writes, and the Phase A contract test still listed eight keys, which is what went red in CI. Claude-Session: https://claude.ai/code/session_01JNnE9qzUZMMnqpZWCqM3nb * test(mobile): hold a navigate target to the same segment rule as the shell's The href pattern is built from the segment source C1.2 tightened, and nothing said so: a spelling one pattern refused while the other took it would be a hole with a `notify` already pointed at it. Claude-Session: https://claude.ai/code/session_01JNnE9qzUZMMnqpZWCqM3nb * fix(mobile): name the key a refused page write reached for The last diagnostic still falling through to the line about a view outliving its host, on the branch that added it. The key is the evidence: it says which host's pinned list the page was reaching into. Claude-Session: https://claude.ai/code/session_01JNnE9qzUZMMnqpZWCqM3nb * test(mobile): give the ref-refresh probe the navigations this branch added C1.1's new case builds its own probe, and on this branch a probe also collects the hrefs the page hands back. The file stopped typechecking on the merge, which the tests ratchet caught. Claude-Session: https://claude.ai/code/session_01JNnE9qzUZMMnqpZWCqM3nb * test(mobile): give the ref-refresh probe this branch's storage writes too Same merge, one branch further: a probe here also collects what the page asked the screen to write. Claude-Session: https://claude.ai/code/session_01JNnE9qzUZMMnqpZWCqM3nb * style(mobile): format the web shell route entry Claude-Session: https://claude.ai/code/session_01JNnE9qzUZMMnqpZWCqM3nb * fix(mobile): hand the page the app's storage as it stands, not one init late The page is handed its allowlisted keys on every `init`, built synchronously, and the app writes two of them from its own native screens. The shell's map was only re-read after a ready, so a native write between two readies reached the init after next: the drawer opened on the repo the user left. The map is now module-scoped and every writer of an allowlisted key notes it as it writes, so the init that answers a ready already carries it. The store read only seats the map, and a read that started before a write no longer puts the older value back. Claude-Session: https://claude.ai/code/session_01JNnE9qzUZMMnqpZWCqM3nb * test(mobile): find the banner's dismiss without an assertion Claude-Session: https://claude.ai/code/session_01JNnE9qzUZMMnqpZWCqM3nb * refactor(mobile): keep the storage mirror in the storage tree The app's own writers had to reach into `src/mobile-web-shell/` to note a write, which is the dependency the wrong way round: the shell is what is built on the app's storage, not the other way. The mirror moves to `src/storage/` and no longer knows which keys the page is allowed; the caller names them on every read and every seat, so the allowlist stays where it is enforced. No behaviour change. Claude-Session: https://claude.ai/code/session_01JNnE9qzUZMMnqpZWCqM3nb * test(mobile): split the bridge frame suite along the modules the merge created `bridge-rpc-client-frames.test.ts` reached 835 counted lines once C0.8 and C1.1 both added cases to it, over the 800 the lint allows. The split follows the two modules those changes extracted, so each suite now names the module it covers. `bridge client page faults` moves to `bridge-client-notifications.test.ts` (the outbound notify surface) and `bridge client refusals and send failures` to `bridge-client-inbound-frames.test.ts` (the reader, including the refused-event release that cancels at the shell). The seven suites that exercise the client as a whole stay put. The fake port all three drive moves to `bridge-page-client-test-harness.ts` rather than being copied three times. No case changed and none was dropped: 48 `it` cases before, 37 + 4 + 7 after, and all nine `describe` bodies compare byte-identical to their originals. Claude-Session: https://claude.ai/code/session_01JNnE9qzUZMMnqpZWCqM3nb * test(mobile): type the shared init fixture as the member a case reads The harness exported `INIT` as `BridgeHostMessage`. While it was a module-local const, control flow narrowed it to the `init` member at each use, so `INIT.grants` read fine. An imported binding keeps its declared type instead, so the same read lost `grants` to the union and the tests ratchet went red. Declared as the init member, which is what every case already treats it as. No cast: the object literal is checked against the narrower type directly. `INIT` was the only exported fixture with this shape. `CONNECTION` is `as const`, `GRANTS` is inferred, and nothing reads a member off an `eventFrame` result. Claude-Session: https://claude.ai/code/session_01JNnE9qzUZMMnqpZWCqM3nb |
||
|
Jinwoo Hong
|
ac4dc6599b |
feat(mobile): the desktop lists a page route, the shell honours it or stays native (OTA phase C, C1.3) (#21502)
* feat(mobile): the page mounts on the shell's init, with the client injected (OTA phase C, C1.1) The Route A entry built no client and mounted the route tree immediately, so the web provider minted its own: it read the page channel, built `BridgeRpcClient` and fell back to a placeholder that rejected every call. A tree that mounts before `init` reads synchronous getters against a client that knows no host, no state and no build, and the first render it records is the wrong one. The entry now owns the page's one client. It builds it from the channel at module scope, mounts nothing until `onReady` fires, and stamps the session and build ids `getShellSession()` returns on the document beside the mount state, so a screenshot, the render check and a device console read the same three facts. `client-context.web.tsx` takes that client by injection and serves it from `acquire()` for every hostId, because the bridge protocol names no host; the placeholder and its `BridgeTransportUnavailableError` are gone, along with the entry that pointed at them in the unvalidated-port inventory. A document with no channel is not inside the shell, so it says `unbridged` and stops rather than waiting out a backoff nobody answers. The render check gains a shell double that answers `ready` with `init`, reads the stamped session back off the document, and proves the gate is real by opening the same route with no double and finding an empty `#root`. Claude-Session: https://claude.ai/code/session_01JNnE9qzUZMMnqpZWCqM3nb * feat(mobile): the shell names the screen, and the page routes to it (OTA phase C, C1.2) The shell serves its document at `/` and refuses every other path, so the page's own location matches no route in the tree it carries and expo-router paints Unmatched. Nothing in the document can tell it otherwise, so the screen has to cross the bridge. `init` gains an optional `route: { pathname, params }`. The pathname is held to what a path may be rather than to what a screen may want: rooted, single-slash, no query and no fragment. A protocol-relative `//host` would make `history.replaceState` throw a cross-origin SecurityError and take the mount down with it, and the params are a field of their own so neither side parses a URL. The shell route supplies it, the screen passes it to B4's hook, and the hook holds it for the life of one host: the page routes once, before its first render, so a route that changed afterwards has nothing left to change. The page writes that URL into its history and then mounts. It also hands the same URL to `ExpoRoot` as its `location`, because `ExpoRoot` snapshots `window.location.href` when its module is imported, which is before any frame has crossed the bridge: without it the router reads the `/` the shell served and replaces the page's own path right back. A shell too old to name a route leaves the page with nothing to open, so it paints a panel saying to update the app, built as elements outside React because the route tree is exactly what cannot mount there. Both platforms stop reading the document's URL to decide a load finished. The page rewrites its own path before its first render, so a document that committed at `/` reports finishing at `/h/<hostId>`; reading the path withheld `ready` forever and left the Android WebView hidden behind it. What is left is whether the load committed, which is the question the state machine already answers. Claude-Session: https://claude.ai/code/session_01JNnE9qzUZMMnqpZWCqM3nb * feat(mobile): the desktop lists a page route, the shell honours it or stays native (OTA phase C, C1.3) The worktree list now renders from the desktop's bundle, and which routes do is negotiated rather than decided on one side. The manifest gains `routes: [{ pathname, grants }]`, written from one declared list the builder checks against the tree it bundled, so a declaration naming a screen with no module fails the build instead of reaching a phone as a page that paints Unmatched. The field is additive because the phone reads the manifest loosely and pins no schema version; the desktop's own writer stays `.strict()`, and the stale comment saying there was no additive path is corrected. The shell answers for what it can do. A route the bundle does not list, or lists needing a grant this app does not implement, settles as `native-route` and downloads nothing; so does a desktop that ships no bundle at all, which is the one blocked verdict that is not a wall, because a desktop with no bundle declares no page route and there is no workspace to refuse. The route is answered before the compat verdict for the same reason: a bundle this shell cannot open is not a reason to refuse a screen it was never going to open. `app/h/[hostId]/index.tsx` mounts the shell when the flag is on and takes the native list back as the fallback, and both routes read the flag through one hook so the census stays the whole census. A tap on a worktree row still opens the native session screen. The page posts `notify { name: 'navigate', href }` behind the `navigate` grant, which is not a convention: `notify` is a closed union, so an older shell refuses the whole frame and the page checks the grant before it posts. The shell pushes the target over the still-mounted view, so Back reveals the page with nothing reloaded. `route-handoff.ts` and its web sibling are the seam, router-shaped so the list's own hook and the recorder's adapter are untouched and no golden moves: the web file wraps the three members that leave the document and hands back any target outside the page routes `init` named. Claude-Session: https://claude.ai/code/session_01JNnE9qzUZMMnqpZWCqM3nb * feat(mobile): the page can tell the shell it faulted (OTA phase C, C1.1) A page that throws where it renders has nowhere to report it: the shell sees a document that loaded and a view that never painted, so it waits on a blank page forever. This adds the one frame that says so. `notify { name: 'fault' }` carries the capture an `error` frame already carries, so both directions share one bound and one reader. It rides a grant because `notify` is a closed list on both sides: a page served by a newer desktop into an older shell would have the whole frame refused, so the page asks `init.grants.native` first and stays quiet on a no. The shell answers it as `document-load-failed`, which is what happened. That reason drops the generation and downloads once, so a page broken by bytes this host has since replaced recovers, and one broken by its own code stops at the failure screen rather than a blank one. Claude-Session: https://claude.ai/code/session_01JNnE9qzUZMMnqpZWCqM3nb * refactor(mobile): give the bridge's notifications and the host's errors their own modules The fault report took both files over the 300-line cap, so each gives up the group that was already separable. The page's one-way members move to `bridge-client-notifications.ts`, which is also where the two policies that split them can be stated: the two the native contract declares throw before a session, and the fault report never throws at all. The host's three error classes move to `bridge-host-errors.ts`, the mirror of the page's own `bridge-client-errors.ts`. No behaviour changes. The commit before this one is over the cap on its own, which a forward-only history is the reason to say rather than hide. Claude-Session: https://claude.ai/code/session_01JNnE9qzUZMMnqpZWCqM3nb * feat(mobile): one boundary under the page's root, reporting to the shell (OTA phase C, C1.1) Nothing in `app/h/**` exports an `ErrorBoundary` and `ExpoRoot` provides no global one, so a throw while a route renders — or a route module that rejects once the manifest is lazy — unmounts the tree and leaves a blank document. The shell sees a load that finished and waits on it forever. The entry now wraps what it mounts on `init` in one boundary that posts the throw over the bridge. Above `ExpoRoot`, not inside its wrapper: a route that cannot be resolved throws where the router renders it, and a boundary below the router never sees that. It renders nothing and offers nothing to press. The generation is on disk and was hash-checked before the view loaded it, so the same bytes throw again and a retry here would only throw twice; recovery belongs to the shell, which drops the generation on the report. The render check now grants the fault and collects what the page posts into the errors every case already asserts empty, because a throw the boundary caught paints nothing and logs nothing a `pageerror` listener would hear. Claude-Session: https://claude.ai/code/session_01JNnE9qzUZMMnqpZWCqM3nb * fix(mobile): write the page-fault callback ref after the commit, not during render React may replay or discard a render, so the write belongs in the commit phase. Layout, not passive, and declared above the host's effect: a native frame can arrive between a commit and a passive effect, and the host must already hold this render's callback. Claude-Session: https://claude.ai/code/session_01JNnE9qzUZMMnqpZWCqM3nb * fix(mobile): write the route ref after the commit, not during render Same class as the page-fault ref: render must stay pure because React can replay or discard it. Folded into the one commit-phase effect above the host's. Claude-Session: https://claude.ai/code/session_01JNnE9qzUZMMnqpZWCqM3nb * fix(mobile): write the page-route and navigate refs after the commit Same class again: the last two writes this branch adds join the commit-phase effect, so nothing this hook holds is written while React is rendering. Claude-Session: https://claude.ai/code/session_01JNnE9qzUZMMnqpZWCqM3nb * test(mobile): take the boundary test to C0.5's fake-client pair `createBridgePortPair` is generic over the shell client now; the fake-client form this test wants is `createFakeBridgePortPair`. Claude-Session: https://claude.ai/code/session_01JNnE9qzUZMMnqpZWCqM3nb * feat(mobile): bound the wait for a page that never says a word (OTA phase C, C1.1) A route module that throws while the bundle is evaluated takes the entry with it. The document still commits and the WebView still reports it loaded, but no boundary mounts, no fault is posted and no frame is ever sent, so the session sat in `ready` behind a blank view forever. The native view's finished load starts a clock; the page's first `ready` stops it; expiry is `document-load-failed`, which deletes the generation and fetches once. Nothing cancels the timer — a `ready` that lands first makes the expiry a no-op — so the runner owns a clock and the reducer owns every decision. Claude-Session: https://claude.ai/code/session_01JNnE9qzUZMMnqpZWCqM3nb * test(config): make a route chunk throw, so the render check proves the boundary reports The check folded page faults into its errors but nothing ever produced one, so a boundary that stopped reporting would have stayed green. The server now serves one real route chunk with a throw in front of it: the module still links, so the failure is an evaluation throw where the router renders, which is exactly what the boundary is for. Claude-Session: https://claude.ai/code/session_01JNnE9qzUZMMnqpZWCqM3nb * fix(mobile): make the host enforce the grants it issued, and hear nothing before ready `forwardNotify` acted on any frame that parsed, including a `fault` from a page that had never asked for a session and therefore held no grant. Both refusals now go through one rule the host shares with the frame it sends, so the list a page is told about and the list it will be served cannot drift. Inert while every page is offered `fault`; the ungranted arm is what C1.3 needs the moment a grant belongs to a route rather than to the protocol. Claude-Session: https://claude.ai/code/session_01JNnE9qzUZMMnqpZWCqM3nb * fix(mobile): refuse a route no page can open, rather than blanking the WebView (OTA phase C, C1.2) `sendInit` put `options.route` straight on the wire and only the page's decoder checked it, so an out-of-contract pathname made the page refuse the whole `init`, ask again on its 2 s backoff forever, and the shell un-hide a view that would never paint. The only trace was a `console.warn` inside the WebView. Three changes, one failure mode. The host parses the route at construction and serves no session at all when it will not do, reporting it as a shell failure. The pathname rule refuses empty segments, dot segments and backslashes anywhere, because `replaceState` normalises `/../../etc` to `/etc` and `/h/a\b` to `/h/a/b` and the page then renders whatever came out. And the producer encodes the host id it interpolates, which is how one carrying a query, a fragment or whitespace got there. Claude-Session: https://claude.ai/code/session_01JNnE9qzUZMMnqpZWCqM3nb * fix(mobile): make a handoff mean the shell took it, not that a frame left (OTA phase C, C1.3) `handOff` returned `client.notifyNavigate(href)`, which answers whether the frame left the page and never whether the shell accepted it. Two hrefs the app builds today were posted, answered true and suppressed the local fallback, so the tap did nothing at all: the Connection-log link's object form, which `String` turns into `[object Object]`, and any href carrying a fragment, because the pathname is stripped to match and the whole href is what goes on the wire. Object hrefs now resolve the way the router resolves them, and the string is checked against the envelope's own pattern and cap before it is posted; anything that fails falls through to the local router, which is the policy this module already states. Whether a target names a screen that exists is shape's business no longer, and the comment says C1.7 owns it. Claude-Session: https://claude.ai/code/session_01JNnE9qzUZMMnqpZWCqM3nb * fix(mobile): start a new flow when the shell view remounts A remount cleared `pageReady` but left the flow alone, so the wait the retired document armed still matched. It expired onto the page that replaced it, took a ready workspace to `document-load-failed`, and deleted the generation on the way. Claude-Session: https://claude.ai/code/session_01JNnE9qzUZMMnqpZWCqM3nb * fix(mobile): say which page notification the bridge refused and why A refused `notify` fell through to the line about a view outliving its host, which is a different fault and names neither the notification nor the reason. The two refusals now get a line each, so a page that was told nothing cannot bury one reaching past what it was told. Claude-Session: https://claude.ai/code/session_01JNnE9qzUZMMnqpZWCqM3nb * test(mobile): pin the ready deadline to the page's own retry ceiling The margin was stated in a comment and asserted against itself, so changing either number left the suite green. Claude-Session: https://claude.ai/code/session_01JNnE9qzUZMMnqpZWCqM3nb * fix(mobile): say what was wrong with the screen a refused shell named C1.1's per-kind log lands on a branch that also refuses a route, and that diagnostic was still falling through to the line about a view outliving its host. It names the shell's own bug now, and carries the issue. Claude-Session: https://claude.ai/code/session_01JNnE9qzUZMMnqpZWCqM3nb * fix(mobile): refuse a dot segment however the route spells it A URL parser percent-decodes a path before it resolves it, so `/h/%2e%2e/x` climbed out of the `/h/` prefix exactly as `/h/../x` does and landed the page on a screen nobody asked for, with no refusal anywhere. The one segment rule both patterns share now reads the encoded spellings as the dot segments they are, and still lets an escape inside a name through. Claude-Session: https://claude.ai/code/session_01JNnE9qzUZMMnqpZWCqM3nb * test(mobile): name routes in the manifest field list the builder emits C1.3 added `routes` to every manifest this builder writes, and the Phase A contract test still listed eight keys, which is what went red in CI. Claude-Session: https://claude.ai/code/session_01JNnE9qzUZMMnqpZWCqM3nb * test(mobile): hold a navigate target to the same segment rule as the shell's The href pattern is built from the segment source C1.2 tightened, and nothing said so: a spelling one pattern refused while the other took it would be a hole with a `notify` already pointed at it. Claude-Session: https://claude.ai/code/session_01JNnE9qzUZMMnqpZWCqM3nb * test(mobile): give the ref-refresh probe the navigations this branch added C1.1's new case builds its own probe, and on this branch a probe also collects the hrefs the page hands back. The file stopped typechecking on the merge, which the tests ratchet caught. Claude-Session: https://claude.ai/code/session_01JNnE9qzUZMMnqpZWCqM3nb * style(mobile): format the web shell route entry Claude-Session: https://claude.ai/code/session_01JNnE9qzUZMMnqpZWCqM3nb * test(mobile): split the bridge frame suite along the modules the merge created `bridge-rpc-client-frames.test.ts` reached 835 counted lines once C0.8 and C1.1 both added cases to it, over the 800 the lint allows. The split follows the two modules those changes extracted, so each suite now names the module it covers. `bridge client page faults` moves to `bridge-client-notifications.test.ts` (the outbound notify surface) and `bridge client refusals and send failures` to `bridge-client-inbound-frames.test.ts` (the reader, including the refused-event release that cancels at the shell). The seven suites that exercise the client as a whole stay put. The fake port all three drive moves to `bridge-page-client-test-harness.ts` rather than being copied three times. No case changed and none was dropped: 48 `it` cases before, 37 + 4 + 7 after, and all nine `describe` bodies compare byte-identical to their originals. Claude-Session: https://claude.ai/code/session_01JNnE9qzUZMMnqpZWCqM3nb * test(mobile): type the shared init fixture as the member a case reads The harness exported `INIT` as `BridgeHostMessage`. While it was a module-local const, control flow narrowed it to the `init` member at each use, so `INIT.grants` read fine. An imported binding keeps its declared type instead, so the same read lost `grants` to the union and the tests ratchet went red. Declared as the init member, which is what every case already treats it as. No cast: the object literal is checked against the narrower type directly. `INIT` was the only exported fixture with this shape. `CONNECTION` is `as const`, `GRANTS` is inferred, and nothing reads a member off an `eventFrame` result. Claude-Session: https://claude.ai/code/session_01JNnE9qzUZMMnqpZWCqM3nb |
||
|
Jinwoo Hong
|
209d2d8df6 |
build(mobile): split the Route A page into per-route chunks (OTA phase C, C1.5) (#21475)
* build(mobile): split the Route A page into per-route chunks (OTA phase C, C1.5) The page bundled as one 8.16 MB script because every route was a static import. The route manifest now defers each screen behind `import()`, the build is esm with splitting on, and the document loads the entry as a module. What the browser parses before the first route can paint drops from 8.16 MB to 908 KiB; the whole page still weighs the same. Two budgets hold it: the chunk count, which catches a split running away, and the bytes the entry reaches by static import, which catches it collapsing back. The second is the one that matters, and it is measured from esbuild's metafile because only that says which import is static. The RequireContext stays synchronous, since expo-router reads keys() to build the route tree before anything renders. A lazy module cannot answer `unstable_settings` or `ErrorBoundary`, which expo-router reads off the namespace, so a test holds that no route in the subtree exports either. The render check now waits for the route's own text: the entry's mount signal lands while the route chunk is still being fetched. Claude-Session: https://claude.ai/code/session_01JNnE9qzUZMMnqpZWCqM3nb * fix(mobile): read a route's synchronous exports from esbuild, not a regex `export { x as ErrorBoundary }`, `export class ErrorBoundary` and a re-export all reach the namespace without matching the declaration pattern the guard was matching, so the lazy manifest dropped the boundary and the page painted blank. A star re-export is now reported rather than read as clean. Claude-Session: https://claude.ai/code/session_01JNnE9qzUZMMnqpZWCqM3nb * docs(mobile): say that the entry budget is not a per-route opt-out Measured: statically importing one route already breaks the 3 MiB bound for 5 of the 14. The hatch only works for a layout node, which is the only place expo-router reads a synchronous export from. Claude-Session: https://claude.ai/code/session_01JNnE9qzUZMMnqpZWCqM3nb * build(mobile): derive the chunk ceiling from the route count 64 was three routes of headroom over the 53 chunks 14 routes measure, so C2's routes would have failed on a number measured before they existed. Four per route plus 16 tracks the measured slope; the entry-bytes bound stays the real budget. Claude-Session: https://claude.ai/code/session_01JNnE9qzUZMMnqpZWCqM3nb * refactor(mobile): drop the web entry's dead suspense boundary expo-router wraps every screen in its own, so this one never fires; all nine render checks stay green without it. Claude-Session: https://claude.ai/code/session_01JNnE9qzUZMMnqpZWCqM3nb * test(mobile): pin that a client-side navigation fetches the next route's chunk Goes red with splitting off: the tasks screen paints out of the entry and no new script is fetched. Claude-Session: https://claude.ai/code/session_01JNnE9qzUZMMnqpZWCqM3nb * fix(mobile): name every bundle output by its bytes, not by esbuild's path hash esbuild's [hash] is over the metafile's input keys, which are paths relative to absWorkingDir, so a checkout at another depth or with node_modules as a symlink named a byte-identical chunk differently and shipped a different buildId for one commit. Outputs are now renamed leaves-first to the sha256 of their final bytes. Claude-Session: https://claude.ai/code/session_01JNnE9qzUZMMnqpZWCqM3nb * fix(mobile): fail the build on a route the lazy manifest would strip The guard ran only in a test while the docstring said it failed the build. It now runs in bundleMobileWebApp and names the route and the export. Claude-Session: https://claude.ai/code/session_01JNnE9qzUZMMnqpZWCqM3nb * build(mobile): derive the asset ceiling from the chunk ceiling and the images A flat 128 stopped agreeing with the chunk ceiling at 18 routes, where the asset count would have failed first and named the count instead of the split. Chunks plus images plus the document keeps the chunk ceiling the one that trips. Claude-Session: https://claude.ai/code/session_01JNnE9qzUZMMnqpZWCqM3nb * test(mobile): split the route-manifest tests out of the bundle builder's The builder's test file passed 600 lines. The route manifest, the synthesized RequireContext and the web entry are their own subject and move together. Claude-Session: https://claude.ai/code/session_01JNnE9qzUZMMnqpZWCqM3nb * fix(mobile): give the export guard the builder's route-source loaders Without .js as jsx the guard reported a React Native .js route carrying JSX as "JSX syntax extension is not enabled" instead of reading its exports. Claude-Session: https://claude.ai/code/session_01JNnE9qzUZMMnqpZWCqM3nb * test(mobile): assert the navigation fetches the tasks route's own chunk "some new script arrived" passed on any fetch. The builder now names the chunk each route lands in, read off the metafile, and the check asserts that exact path arrived and was not already loaded. Claude-Session: https://claude.ai/code/session_01JNnE9qzUZMMnqpZWCqM3nb * fix(mobile): resolve a route's realpath before matching it to its chunk esbuild writes metafile input keys after resolving symlinks, so every scratch route tree under /var on macOS reached no output and failed the build. Claude-Session: https://claude.ai/code/session_01JNnE9qzUZMMnqpZWCqM3nb * fix(mobile): fail the build when the asset ceiling outgrows the shell's map The derived ceiling had no upper bound, and the native shells return null for a manifest over their own 256 rather than truncating it. At 42 images the formula crosses that at 50 routes, inside what Phase C adds, so the build would stay green while the phone got nothing. The number is read from the contract through esbuild, not restated here. Claude-Session: https://claude.ai/code/session_01JNnE9qzUZMMnqpZWCqM3nb * test(mobile): cover the two hard stops in the content-addressed naming Both throws only ran through a whole bundle before, where neither can be provoked. A cycle and a route no output claims are now asserted directly; each test goes red when its throw is removed. Claude-Session: https://claude.ai/code/session_01JNnE9qzUZMMnqpZWCqM3nb * fix(mobile): exit the app-bundle build on one line, not a stack The route-export guard fails this script by design, and a raw stack put the route and the export name under twelve frames of node internals. Mirrors the verifier's exit; the message is printed as thrown because every throw on this path already names its source. Claude-Session: https://claude.ai/code/session_01JNnE9qzUZMMnqpZWCqM3nb |
||
|
Jinwoo Hong
|
381a3da46f |
feat(build): Route A, the phone's host routes bundled for the web, dark (OTA phase C, C0.7) (#21449)
* refactor(mobile-web): share the bundle manifest assembly with a second builder Manifest assembly and the on-disk write move to writeMobileWebBundleTree, and the helpers the Phase C app builder needs become exports. No behaviour change to the shipped bootstrap bundle. The CRLF guard grows two exemptions it needs once it is pointed at mobile/src: the image and font extensions .gitattributes already pins -text, and the gitignored webview engine modules the postinstall writes. Claude-Session: https://claude.ai/code/session_01JNnE9qzUZMMnqpZWCqM3nb * feat(mobile): web entry for the host route tree, and its two transport siblings The entry mounts app/h on react-native-web through expo-router's own ExpoRoot. It lives inside mobile/ so one React resolves, and supplies RpcClientProvider itself: the route tree starts below the native root layout that owns it. route-manifest.ts is a real typed module whose body the builder replaces -- esbuild has no require.context. A virtual specifier would need an ambient declaration and would leave the entry unchecked. Two .web.* siblings, both listed with a reason in web-overrides.json: the transport substitution point (a placeholder client until C0.4 lands BridgeRpcClient) and the device token store, whose native path imports expo-secure-store, which is {} on web. Claude-Session: https://claude.ai/code/session_01JNnE9qzUZMMnqpZWCqM3nb * feat(build): build:mobile-web:app, the phone's host routes bundled for the web Same builder shape as the Phase A bootstrap into a separate out/mobile-web-app, with the same manifest and the same two-scratch-build determinism check. Dark: build:mobile-web, packaging and the A2 census are untouched, and C1 is what flips build:release. Six shims, each a named Metro or RN Web gap. Images are emitted as same-origin hashed assets rather than data: URLs, because the shell's CSP sets img-src 'self'; the render check under that exact header is what found it. The script is referenced root-absolute for the same reason a <base> tag cannot be used: the document is served at every route depth and base-uri is 'none'. The budget sits below the contract's per-asset ceiling so growth trips a build rather than a refused asset on a phone. esbuild splitting does not lower it: one entry with only static imports emits one chunk (measured). Claude-Session: https://claude.ai/code/session_01JNnE9qzUZMMnqpZWCqM3nb * fix(mobile): let React Native Web paint under the shell CSP RN Web 0.21.2 injects its stylesheet at runtime with no nonce support, so style-src 'self' blocks every rule and the page renders unstyled. Measured, not predicted: the render check serves the document under this exact header and reported the violation. 'unsafe-inline' is granted to style-src and nothing else. script-src 'self' holds, which is the directive that decides whether page code can arrive any way other than as a fetched same-origin script. The test now pins that scoping rather than rejecting the token everywhere. Claude-Session: https://claude.ai/code/session_01JNnE9qzUZMMnqpZWCqM3nb * ci: prove the Route A app bundle on every PR A dedicated job, for the same reason the browser provider has one: it needs mobile/node_modules and a real browser, and the sharded test matrix would pay for both on every shard. It builds the bundle, verifies it, and runs the builder, override-census and render suites. It ships nothing. The mobile_web_app signal is lifted out of should_run the way static_analysis is. A mobile-only diff is desktop-irrelevant and skips every gated job, and that is exactly the diff that changes the page this job builds. Also the C0.6 review follow-up: mobile/package.json and mobile/pnpm-lock.yaml join the installer cache keys in the two workflows that build an installer off a hashFiles key, since beforePack requires out/mobile-web and a mobile-only change must miss those caches rather than reuse a stale build. Claude-Session: https://claude.ai/code/session_01JNnE9qzUZMMnqpZWCqM3nb * test(build): pin the shipped builder against the app builder's own module name The assertion named a specifier that no longer exists, so it held vacuously. Claude-Session: https://claude.ai/code/session_01JNnE9qzUZMMnqpZWCqM3nb * test(mobile): assert the RN Web style-src grant in the Swift checks The Swift twin of the Kotlin CSP test still required style-src 'self' and no unsafe-inline anywhere, so it trapped on the approved grant. Claude-Session: https://claude.ai/code/session_01JNnE9qzUZMMnqpZWCqM3nb * test(build): make the Route A render check name what each route paints The check asserted only "some html, no errors", which expo-router's Unmatched screen satisfies: pointing HOST_ROUTE at /zzz/not-a-real-prefix stayed green. Each route now asserts content only its own component produces, and the unmatched case asserts the screen positively so the negatives discriminate. Claude-Session: https://claude.ai/code/session_01JNnE9qzUZMMnqpZWCqM3nb * test(build): read the shell CSP past the comments that quote directives Both constants document themselves with // comments containing quoted directive text, which the quoted-string scan picked up as directives. One parser now drops comment lines, and iOS and Android go through it. Claude-Session: https://claude.ai/code/session_01JNnE9qzUZMMnqpZWCqM3nb * feat(build): honour a .web.* route sibling in the app bundle Routes were imported by absolute path with the extension, so esbuild's resolveExtensions never applied and a .web.tsx under app/ was dead code the census still accepted. The manifest now carries a key and a module: the key stays the native filename so the URL does not move, and the module is the web sibling when one exists. Claude-Session: https://claude.ai/code/session_01JNnE9qzUZMMnqpZWCqM3nb * test(build): tie each named shim to the esbuild option that implements it The shim list was asserted against a literal copy of itself, which passes however the build is configured. Each entry now carries an appliesTo that reads its own option, checked against the real options object. Claude-Session: https://claude.ai/code/session_01JNnE9qzUZMMnqpZWCqM3nb * chore(build): line up the CRLF exemptions, the budget comment, and the job scope The builder loads .gif as a file but neither .gitattributes nor the CRLF scan exempted it, so the blanket eol=lf pin would have rewritten one. A test now keeps the two lists in step. The Phase C byte budget's comment sat on the asset count, and a root package.json edit could change build:mobile-web:app without running the job that proves it. Claude-Session: https://claude.ai/code/session_01JNnE9qzUZMMnqpZWCqM3nb * style(build): satisfy the index-check lint rule in the CSP parser Claude-Session: https://claude.ai/code/session_01JNnE9qzUZMMnqpZWCqM3nb * ci: key the installer caches on the mobile page trees too beforePack builds the mobile web bundle into the installer. Today those bytes are Phase A's, which src/** already covers, but once C1 flips the entry to mobile/app a page-only change would hit a cache holding a stale installer. Claude-Session: https://claude.ai/code/session_01JNnE9qzUZMMnqpZWCqM3nb * test(build): skip the bundling tests where mobile dependencies are absent The sharded `test` job collects config/scripts/**/*.test.mjs and installs no mobile dependencies, so the two new suites failed there on "Could not resolve react-native-web". They now skip themselves with a message naming the job that runs them, and that job sets ORCA_MOBILE_WEB_APP_DEPS_REQUIRED so a missing install fails it instead of skipping everything it exists to prove. Claude-Session: https://claude.ai/code/session_01JNnE9qzUZMMnqpZWCqM3nb * fix(build): scan mobile/packages in the .web.* census The census claimed the app entry never resolves into packages/, but the dictation hook imports @orca/expo-two-way-audio and the built script carries ExpoTwoWayAudioModule.web.ts. That file is now listed with its reason, and planting a .web.* in each scanned tree proves the scan is not passing because a tree happens to be empty. Claude-Session: https://claude.ai/code/session_01JNnE9qzUZMMnqpZWCqM3nb * test(build): assert the route exclusions against a tree that has them mobile/app holds no test, spec or +api file, so the exclusion rule was asserted against a tree it could not fire on. A scratch tree plants one of each; dropping the rule now fails this test. Claude-Session: https://claude.ai/code/session_01JNnE9qzUZMMnqpZWCqM3nb * test(build): 404 unknown file paths in the render check's page server The server answered every path with the document, so pointing publicPath at /wrong-prefix still rendered three green routes: the script is fetched from the one prefix that is served. A path naming a file now has to come out of the bundle, which is what the shell's manifest map does. Claude-Session: https://claude.ai/code/session_01JNnE9qzUZMMnqpZWCqM3nb * test(build): cover the app bundle verifier's own checks The verifier had no test. One doctors the buildId, which the packaged assert catches; the other rewrites the tree so every digest still agrees and only the two fresh builds can tell, which is what a stale out/ looks like. Deleting either check now fails a test. Claude-Session: https://claude.ai/code/session_01JNnE9qzUZMMnqpZWCqM3nb * chore(build): tidy the app bundle comments and the job's path prefixes Drops an export nothing read, merges two comments that had drifted apart from the constant they describe, and corrects the claim that the job runs on every PR when it is path-gated. package.json leaves the prefix list because GLOBAL_FORCE_FILES already forces every job on it; mobile/packages/ joins it, since the page resolves a .web.ts out of there. Claude-Session: https://claude.ai/code/session_01JNnE9qzUZMMnqpZWCqM3nb * style(build): merge the duplicate node:fs/promises import in the census Claude-Session: https://claude.ai/code/session_01JNnE9qzUZMMnqpZWCqM3nb * fix(mobile): redirect the hybrid shell route on the web page app/h/[hostId]/web.tsx reaches OrcaMobileWebShellView, whose module calls requireNativeViewManager at import. In a browser that throws before React mounts, and the route manifest imports every route statically, so one native route left the whole page blank at every URL. Claude-Session: https://claude.ai/code/session_01JNnE9qzUZMMnqpZWCqM3nb * test(build): fail the render check with the error that stopped the mount The check waited on "#root has children" with Playwright's animation-frame polling, so a route module that threw at import read as a bare 30s timeout naming nothing. It now waits on a mount attribute the entry sets after the router commits, polls on a timer, and races the wait against the first uncaught error so the failure carries it. Claude-Session: https://claude.ai/code/session_01JNnE9qzUZMMnqpZWCqM3nb * test(build): answer the favicon the render browser asks for CI resolves the runner's Google Chrome, which requests /favicon.ico; the bundled headless shell does not. The bundle carries no icon, so the server answers 204 rather than turning a browser habit into a console error the render assertions read as a page fault. Claude-Session: https://claude.ai/code/session_01JNnE9qzUZMMnqpZWCqM3nb * test(build): settle the render check's uncaught-error race without rejecting The entry throws during goto, before anything awaits the race, so a rejected promise surfaced as an unhandled rejection beside the real failure. The same signal now resolves with the error. Claude-Session: https://claude.ai/code/session_01JNnE9qzUZMMnqpZWCqM3nb * chore(mobile): list the page transport in the raw request port inventory The placeholder client implements the port, so the boundary test counts it as an unlisted file. It belongs under OWNERS until C0.4's BridgeRpcClient replaces it. Claude-Session: https://claude.ai/code/session_01JNnE9qzUZMMnqpZWCqM3nb |