Creating a workspace hard-failed with "Could not refresh base ref …"
whenever the pre-create git fetch of a remote-tracking base (e.g.
origin/main) failed — offline, transient, or (common on Linux GUI) the
Electron process lacking SSH_AUTH_SOCK so `ssh -o BatchMode=yes` cannot
auth. This blocked creation even when a perfectly usable local
origin/main already existed and `git worktree add` from it would succeed.
Regression introduced by #2310 (5c93579e40), which replaced the prior
best-effort fetch + post-create reconcile with a hard network gate.
Fix: at all three create sites (local runtime, local IPC, SSH), only
throw when the refresh failed AND no usable local base ref exists;
otherwise create from the local ref (a possibly stale but valid base).
Also: move the SSH local-ref probe after session.registerRoot so relays
that gate generic git.exec don't false-negative and defeat the fallback.
Co-authored-by: Orca <help@stably.ai>
* fix: address pr-bug-scan validated finding from #6952
throwNodeNotFound() now re-raises AbortError when the shared signal is aborted, so a signal-cancelled node probe no longer launders into 'Node.js not found'; sequential fallback runs.
* fix(ssh): make session-limited (MaxSessions=1) relay deploys actually succeed
Review of #7180 verified the parent fallback end-to-end against a real
MaxSessions=1 sshd and found the connect still failed. Four gaps, in order
of discovery:
- isSshSessionLimitError missed stock OpenSSH, which refuses session
channels over MaxSessions with SSH2_OPEN_CONNECT_FAILED (2) and 'open
failed' — reason 4 never matched, so the fallback never triggered.
- execCommand settled aborted commands before the channel finished
closing, so the sequential fallback reissued execs while sshd still
counted the old session.
- SshConnection.waitForSshCallback rejected aborts mid-channel-open
immediately, leaking a confirmed-late channel that held the only
session slot; it now settles after the late channel closes (bounded)
and drains its streams so ssh2 emits 'close'.
- Session channel opens now retry transient session-limit refusals
(sshd frees the slot only after processing our close-ack, which the
next open can beat by microseconds), and the remote orca CLI shim
install is non-fatal like the managed-hook install — after the relay
bridge occupies the sole session slot, raw-connection extras must
degrade instead of failing the connection.
Verified live against Docker sshd (OpenSSH 9.2, MaxSessions=1): fresh
deploy (upload + native deps + launch), reconnect cycles, and a PTY
round-trip all succeed; unrestricted-sshd regression run also passes.
Co-authored-by: Orca <help@stably.ai>
* Handle ssh execution aborts immediately during retry backoff or hangs
- Cancel the session-limit retry delay immediately if the operation is
aborted during backoff.
- Limit the wait time to a 5-second grace period when aborted during a
channel open that is hung and never invokes its callback, rather than
waiting for the full connection timeout.
---------
Co-authored-by: orca-bug-scan-bot <orca-bug-scan-bot@stably.ai>
Co-authored-by: Jinjing <6427696+AmethystLiang@users.noreply.github.com>
Co-authored-by: Orca <help@stably.ai>
- Prevent the "Stage All" button from being enabled when only nested
submodule worktree changes are present.
- Remove the disabled stage button on submodule worktree-only rows,
replacing it with an explanatory tooltip.
- Fix WSL terminal environment assertion in daemon PTY tests to allow
inherited agent-hook environment variables.
* Fix notes send targets for manual agents
* Split agent title merging into manual and launch-agent paths
Separate the merging logic for terminal titles depending on whether the
tab has a launch agent or is a manually started CLI.
- Launch-agent tabs carry an owner bit, allowing their live titles to
promote a stale status row on the same pane.
- Manually started agents have no owner bit, so they only ever add a
row and must not override existing status evidence.
- Remove the temporary TitleHintAgentTarget type and the need to strip
metadata when pushing targets.
Quality pass on main-process/build PRs merged 2026-07-03:
- ios-emulator-backend: resolve the serve-sim executable via a lazily-cached getter
instead of eagerly in the constructor. The bridge is built before the main window
is shown, so the one-time recursive copy + xattr subprocess (first launch after each
version bump) no longer blocks macOS startup for a feature that may go unused (#7174).
- index: collapse the two near-identical `{webContentsId, until}` reload flags
(expectedRendererReload / recoveryReloadInFlight) into one `createWebContentsTimedFlag`
primitive; behavior preserved, including consume-on-read for the recovery reload (#7290).
- check-reliability-gates: coerce gate.commands/testFiles/platforms/providers with an
`asArray` helper before `.includes`, so a hand-edited manifest with a missing/mistyped
field reports a validation failure instead of throwing an uncaught TypeError; extract
`hasCompleteRedGreenEvidence` for the duplicated status check (#7295).
- claude-pty: derive FABLE_WEEKLY_LABEL_RE from WEEKLY_RE.source so a future weekly-
wording change stays in one place and can't reopen the parsing gap it just closed.
- macos-tcc-login-shell: trim the 30-line flag-by-flag JSDoc to the two non-obvious whys
(TCC identity, env(1) SHELL re-assertion) per the repo comment guidance (#7003).
Typecheck, oxlint, oxfmt, `check:reliability-gates`, and touched unit suites all pass.
Quality pass on renderer/shared PRs merged 2026-07-03:
- WorktreeTitleInlineRename: skip the truncation measure + ResizeObserver in `wrapTitle`
mode, where wrapped titles never truncate — it could only churn unused state (#7307).
- editor slice: reuse the `removeEditorStateForReplacedPreview` helper this PR added
instead of a hand-rolled copy of the same six-field eviction (drops ~50 lines) (#6476).
- useFileExplorerTree: extract `readWorktreeDirectory` so the connectionId/settings
assembly for `readRuntimeDirectory` lives in one place, not three (#6321).
- comment-markdown-github-attachment-media: extract a shared `AttachmentFallbackLink`
for the image/video error-fallback link (#6759).
- repository-icon-github: fold the two near-identical live resolvers into one
parameterized `resolveRepositoryIdentityLive`; trim a 3-line comment to 2 (#6507).
- resource-usage-open-slices: delete the `shouldReadPopoverSlices` identity wrapper and
inline `open` at the four call sites (#7275).
- BrowserPane: drop the pointerEvents assignment already applied inside
`ensureBrowserPageWebview` for the reused-webview path (#6958).
- github slice: fix two garbled "…a commit main confirmed…" comments (#7277).
- runtime-file-client: trim the binary-file fallback comment to its whys (#6606).
- composer-branch-selection: drop the inline comment that restated the JSDoc (#6748).
- TabBarQuickCommandsButton: correct the stale "+ Command" comment (button shows no +).
No behavior change (the editor-helper reuse is behavior-equivalent, only more
conservative on an edge case); typecheck, oxlint, react-doctor, oxfmt, and touched
unit suites all pass.
Quality pass on terminal PRs merged 2026-07-03:
- pane-split-close: extract a shared `teardownManagedPane` so `closeManagedPane` and
`detachManagedPaneForExternalMove` can't drift apart on future edits (#7215).
- terminal-link-activation: reuse the existing `isMacPlatform()` instead of a second
inline `navigator.userAgent` copy, keeping one source of truth for Mac detection.
- pty-connection: gate the shadow-cursor moves on empty CSI params so parameterized/
modified cursor keys (e.g. Ctrl+Left word-jump, `ESC[1;5D`) reset command tracking
instead of silently desyncing the buffer used to infer a typed agent name; relocate
the `getAuthoritativePaneAgent` JSDoc to the function it documents (#6954).
No behavior change except the cursor-tracking hardening; all touched unit suites pass.
This reverts commit a94d692cd5, restoring the
shorter "Command" label and the Play icon on the quick command entry
(PRs #5528 and #5674).
Co-authored-by: Orca <help@stably.ai>
sherpa-onnx cannot load model files or hotword lists from Windows
paths containing non-ASCII characters.
- Resolve speech model and hotwords paths to ASCII-safe alternatives
like ProgramData when the default userData path contains non-ASCII
- Migrate existing downloaded models from the legacy non-ASCII cache
- Ensure deleted models are removed from the legacy source folder to
prevent them from being re-migrated on subsequent launches
Fixes the PTY fallback path so Claude Fable usage carries a concrete reset timestamp and the existing status tooltip renders the Fable reset countdown.
* fix: stop Claude account loading after denial
* fix(claude-accounts): tear down whole login tree on OAuth denial
Use killChild() (not child.kill) on the denial path so the detached
POSIX process group and Windows child tree are killed, matching the
timeout/abort paths and honoring the detached-spawn comment. Strengthen
the regression test to assert the process-group teardown.
Co-authored-by: Orca <help@stably.ai>
---------
Co-authored-by: Neil <charlie-eng@stably.ai>
Co-authored-by: Orca <help@stably.ai>
* feat: allow custom worktree branch names
* refactor(ui): render custom branch name field unconditionally under advanced container
* fix(composer): hide manual branch field when a work-item source drives the branch
A tracked PR/issue/MR/Linear source derives the branch itself, and a linked
GitHub PR re-resolves the branch name at submit — so an override typed in the
Advanced branch field was silently ignored. Only render the field for the
typed-name and base-branch flows, where the manual override is honored.
Co-authored-by: Orca <help@stably.ai>
---------
Co-authored-by: Wolfgang Schoenberger <221313372+wolfiesch@users.noreply.github.com>
Co-authored-by: Neil <4138956+nwparker@users.noreply.github.com>
Co-authored-by: Orca <help@stably.ai>
The POSIX agent-hook script for every curl-based agent inlined the full
event payload via `curl --data-urlencode "payload=${payload}"`. Tool
output can be tens of KB, so the resulting process command line could be
multi-KB — which endpoint security tools (e.g. Microsoft Defender for
Endpoint) flag as an oversized/suspicious command line. That produced a
false-positive detection on Orca's own loopback (127.0.0.1) telemetry POST.
Stream the payload to an mktemp file and post it with
`--data-urlencode "payload@$payload_file"` instead. The urlencoded body on
the wire is byte-identical, so the agent-hook receiver is unchanged; the
payload simply never appears on a process command line. `trap ... EXIT`
removes the temp file on every exit path. Small bounded metadata fields
(paneKey/tabId/worktreeId/env/version) stay inline.
Applied to all curl-based agents: claude, codex, command-code, copilot,
cursor, droid, gemini, grok, antigravity. (amp/hermes/opencode post via
the HTTP request body and were never affected.) The Windows post-command
shares the same latent pattern and is flagged as follow-up.
Co-authored-by: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Co-authored-by: Neil <4138956+nwparker@users.noreply.github.com>
Co-authored-by: Orca <help@stably.ai>
* fix(gitlab): port-aware self-hosted host recognition
Use the URL host (including a non-default web/API port) as the GitLab
host identity instead of the port-less hostname, and match known hosts
port-aware:
- A known-host entry without a port matches any port of the same
hostname (preserves legacy bare-host and gitlab.com recognition).
- A known-host entry WITH a port matches only that exact host:port, so
two services sharing a hostname on different ports (e.g. a GitLab and
a Gitea) are no longer conflated.
- For ssh/git remotes the port is a transport port (e.g. ssh :2222) and
is dropped; for http(s) remotes the port is the endpoint and kept.
- Also capture an optional :port in parseGlabAuthStatusHosts so a
self-hosted GitLab on a non-default port is discovered correctly.
* fix(gitlab): per-connection known-hosts cache + port-aware auth-status parsing
getGlabKnownHosts() was connection-blind and cached process-globally,
and on any failure it cached [gitlab.com] forever — so a repo on an SSH
connection never discovered its self-hosted host once a probe failed
before the tunnel was ready.
- getGlabKnownHosts(connectionId?) now caches per connection so a
connected repo's authenticated hosts don't leak into the local
context (or vice versa).
- The failure fallback (canonical default) is no longer cached, so a
later probe can re-discover the real host once auth/tunnel is ready.
- parseGlabAuthStatusHosts captures an optional :port on both the
'Logged in to <host>' and header-style lines, keeping two services on
the same hostname distinct by port.
* fix(gitlab): isolate unresolvable projects instead of cwd-fallback that hits exit 128
listIssues/getIssue fell back to an unscoped 'glab issue list' / 'glab
issue view' that infers the project from cwd. For a repo on an SSH
connection cwd is not the repo dir, so glab runs git resolution in a
non-repo dir and fails with 'git: exit status 128'. In an 'All projects'
aggregate one such failure could sink the whole issues panel.
When a projectRef cannot be resolved, return a structured, isolated
per-project result (listIssues: { items: [], error: not_found };
getIssue: null) and spawn no glab subprocess. Behavior is unchanged when
a projectRef IS resolved (the scoped '-R' / 'api projects/...' path).
* fix(gitlab): recognize modern /-/work_items/<iid> issue URLs
Modern GitLab emits issue URLs as /-/work_items/<iid> in addition to the
legacy /-/issues/<iid>. The URL classifiers only matched /-/issues/, so
work-item-form issue links went unrecognized.
Extend the gitlab-links parsers (parseGitLabIssueOrMRNumber /
parseGitLabIssueOrMRLink, which also backs isWorkItemLookupText) and
isGitLabIssueUrl to accept /-/work_items/<iid>, mapping it to an issue
work item with the same project-path + iid extraction.
* fix(gitlab): thread connectionId into getGlabKnownHosts call sites
Follow the existing connectionId-threading pattern: pass the repo's
connectionId into every getGlabKnownHosts() call (client.ts,
work-item-details.ts, orca-runtime.ts) so the per-connection known-hosts
cache is keyed correctly and self-hosted hosts are discovered against
the right glab context.
* docs(gitlab): use generic example hosts in comments
* fix(gitlab): pass self-hosted host:port via GITLAB_HOST (glab --hostname rejects ports)
* polish: satisfy oxlint curly + oxfmt on merged gitlab port-recognition code
Co-authored-by: Orca <help@stably.ai>
---------
Co-authored-by: Ptah-CT <auctor@xinfty.space>
Co-authored-by: Neil <4138956+nwparker@users.noreply.github.com>
Co-authored-by: Orca <help@stably.ai>
* fix(serve): install the orca CLI in headless serve mode
In headless serve mode the orca CLI command (~/.local/bin/orca on Linux,
/usr/local/bin/orca on macOS) is never created, so the in-app Claude Team
launcher (orca claude-teams) opened by 'Start new agent' fails with
command-not-found. CliInstaller.install() is only invoked from renderer/desktop
flows (onboarding, Settings 'Install CLI', feature tips) via the cli:install IPC;
headless serve has no renderer. Run the existing idempotent installer on the
serve startup path, best-effort so a failure never blocks serve startup.
Fixes#5763.
* fix(serve): install a bare `orca` dispatcher on Linux for Claude Team
On Linux CliInstaller installs the CLI as `orca-ide` (to avoid shadowing GNOME
Orca's /usr/bin/orca), not bare `orca`. But the Claude Team launcher (`orca
claude-teams`), composed client-side by both the desktop renderer and the
mobile app and written verbatim to the host PTY, invokes bare `orca` — which
is unresolved in the initial managed terminal (no agent-teams shim on PATH
yet). The serve-mode CLI install therefore fixed macOS but not Linux.
Add a bare-`orca` dispatcher in the serve branch (host-side, Linux only) that
execs the bundled CLI wrapper. ~/.local/bin is hardcoded ahead of /usr/bin on
the managed-terminal PATH, so it resolves. Plain file (not a managed symlink)
so CliInstaller.removeLegacyLinuxCommandIfManaged leaves it untouched.
* Restore ai-vault files to origin/main (drop stale pre-0.52 oxfmt merge artifact)
Co-authored-by: Orca <help@stably.ai>
* Harden serve CLI install: AppImage-safe dispatcher, no-prompt macOS, skip Windows, conflict guard
- Gate CliInstaller.install() to macOS+Linux; Windows would only mutate the
persistent user-registry PATH without helping the current serve's terminals.
- Inject a non-prompting privilegedRunner so headless macOS never pops an
osascript admin dialog when /usr/local/bin isn't writable (skips instead).
- Linux dispatcher: exec the stable $APPIMAGE via buildAppImageCliWrapper when
running from an AppImage (resourcesPath is an ephemeral FUSE mount); skip when
the bundled orca-ide launcher is absent; never clobber a user-owned ~/.local/bin/orca.
- Single-quote the exec target; add coverage for all new branches.
Co-authored-by: Orca <help@stably.ai>
---------
Co-authored-by: Daniel Rudaev <daniel@d1dx.com>
Co-authored-by: Orca <help@stably.ai>
* fix(browser): restore programmatic focus for CDP text insertion
* test(browser): cover the DOM focus replay error path
* fix(browser): serialize DOM.focus replay against pipelined Input.insertText
* refactor(browser): consolidate pending-focus invalidation into one guard
Collapse the three per-handler deletes (Page.bringToFront, Page.captureScreenshot,
catch-all) of the pending DOM.focus replay into a single guarded delete keyed on
'not DOM.focus and not Input.insertText'. States the invariant in one place and
removes the trap where a future early-returning handler forgets to clear the
stale focus. Also clear the map on client teardown and shorten the field comment.
Co-authored-by: Orca <help@stably.ai>
* test(browser): annotate mock webContents return type for portable declaration emit
Co-authored-by: Orca <help@stably.ai>
* fix(browser): drop pending focus replay when the client disconnects mid-flight
Co-authored-by: Orca <help@stably.ai>
* fix(browser): re-check active client after DOM.focus replay round-trip
Co-authored-by: Orca <help@stably.ai>
---------
Co-authored-by: Neil <4138956+nwparker@users.noreply.github.com>
Co-authored-by: Orca <help@stably.ai>
* Add terminal link browser context action
* Polish terminal link default-browser action
- Route Open in Default Browser through the shared openHttpLink funnel
(forceSystemBrowser) so loopback dev-server links get the same
worktree-label rewrite as shift+click's system-browser path.
- Translate the new menu label in es/ja/ko/zh (was en-only).
- Extract TerminalQuickCommandMenuItem to keep TerminalContextMenu under
the max-lines lint after adding the link item.
- Hit-test the link only when the menu actually opens (skip on Windows
right-click copy/paste path).
- Add scheme-safety unit tests (file:/javascript:/smb:/vscode: rejected)
and a menu-item render/callback test; fix TerminalContextMenu.test
props for the new required fields.
Co-authored-by: Orca <help@stably.ai>
---------
Co-authored-by: Neil <4138956+nwparker@users.noreply.github.com>
Co-authored-by: Orca <help@stably.ai>
* fix(browser): keep isolated profile storage on its partition
* fix(browser): keep cloned isolated tabs on their resolved partition
* fix(browser): thread resolved partition through UI profile switches
Keep the isolated-storage invariant universal: UI-initiated profile
switch/create now persist the resolved partition alongside the profile
id, matching the runtime path, so a tab stays on its partition even if
the renderer profile mirror is later stale (issue #6923).
Co-authored-by: Orca <help@stably.ai>
* fix(browser): persist resolved partition through session restore
Add sessionPartition to the workspace-session zod schema so the resolved
partition survives persist->load; without it zod strips the field and a
restored isolated tab whose profile mirror is stale at startup falls back
to the shared default partition, reopening the storage leak (#6923).
Fold the webview teardown branches (parent drift or partition mismatch)
into one and re-resolve the viewport container once, matching the
pre-refactor null-guard behavior.
Split the sleeping-agent parse tests into their own file to keep both
under the 800-line cap.
Co-authored-by: Orca <help@stably.ai>
* fix(browser): keep CLI-created tabs inheriting the default profile
browserTabCreate without an explicit profile was sending sessionProfileId:
null, which the renderer store treats as 'no inheritance' (its guard is
!== undefined). That forced CLI-created tabs onto the shared default
partition even when the user had configured a default browser session
profile, silently changing behavior a #6923 fix should not touch.
Leave sessionProfileId/sessionPartition undefined when no profile is named
so the renderer applies default-profile inheritance; thread the resolved
partition only when a profile is explicitly chosen.
Co-authored-by: Orca <help@stably.ai>
---------
Co-authored-by: Neil <4138956+nwparker@users.noreply.github.com>
Co-authored-by: Orca <help@stably.ai>
* fix: drop stale repos fetches so deleted projects don't reappear
Deleting a project group with "Remove contained projects" could leave the
removed projects as stale, unusable sidebar rows until an app restart (#7020).
`repos:changed` fires once per removal and the renderer starts an unsequenced
repos fetch per event; an earlier fetch that read pre-removal state could
resolve last and overwrite the newer result, reintroducing the deleted repos.
Guard fetchRepos and fetchReposForAllHosts with a monotonic token so a fetch
drops its own result once a newer repos fetch has superseded it — only the
latest fetch, which reads the final persisted state, applies. Add a regression
test that a stale fetch resolving after a newer one can't resurrect a removed
repo.
* test: isolate stale-fetch race in a dedicated file; scope guard to fetchRepos
Move the #7020 regression test out of repos.test.ts into a focused
repos-stale-fetch.test.ts and add a reject-path case (a superseding fetch
that later rejects must still block the older stale fetch). Scope the
monotonic guard to fetchRepos only: the original shared-counter guard on
fetchReposForAllHosts let an unrelated fetchRepos bump the counter and
abort an in-flight all-host load, dropping every host's repos.
Co-authored-by: Orca <help@stably.ai>
* chore: restore origin/main cdp-ws-proxy.test.ts (drop merge artifact)
Co-authored-by: Orca <help@stably.ai>
---------
Co-authored-by: Neil <4138956+nwparker@users.noreply.github.com>
Co-authored-by: Orca <help@stably.ai>
NeilandOrca
Jinwoo Hong
slashdevcorpseandJinwoo Hong
Brennan BensonandOrca
andrewroxby
PPandping
m11yandClaude Fable 5
Soichi Sumi
haozhenfei
