Commit Graph
9 Commits
Author SHA1 Message Date
NeilandOrca 879aad7dd6 oom(foundation): bound shared readers/limits + add BoundedMap primitive (#10299)
* oom(01): A1-shared-readers — reintroduce #10179 subset

Files: 18 applied, 0 deleted (from 6eb70d8370)

Co-authored-by: Orca <help@stably.ai>

* oom(02): A2-shared-image-media — reintroduce #10179 subset

Files: 7 applied, 0 deleted (from 6eb70d8370)

Co-authored-by: Orca <help@stably.ai>

* oom(03): A3-shared-fs-listing — reintroduce #10179 subset

Files: 21 applied, 0 deleted (from 6eb70d8370)

Co-authored-by: Orca <help@stably.ai>

* oom(04): A4-shared-remote-relay — reintroduce #10179 subset

Files: 8 applied, 0 deleted (from 6eb70d8370)

Co-authored-by: Orca <help@stably.ai>

* oom(05): A5-shared-misc — reintroduce #10179 subset

Files: 28 applied, 0 deleted (from 6eb70d8370)

Co-authored-by: Orca <help@stably.ai>

* oom(06): B-shared-wiring — reintroduce #10179 subset

Files: 81 applied, 0 deleted (from 6eb70d8370)

Co-authored-by: Orca <help@stably.ai>

---------

Co-authored-by: Orca <help@stably.ai>
2026-07-24 21:36:57 -07:00
NeilandOrca aab112933e Revert "fix(memory): bound OOM-prone accumulators (#10179)" (#10255)
Co-authored-by: Orca <help@stably.ai>
2026-07-23 18:35:31 -07:00
Neil 8f40ddf328 fix(memory): bound OOM-prone accumulators (#10179) 2026-07-23 06:22:56 -07:00
Jinjing f1d2fe5c65 perf(git-status): duty-cycle, cancel, and cache status polling to cut idle git load (#8922)
* feat(git-status): batch, cancel, and cache git status polling to cut idl

- Add a single duty-cycled refresh scheduler (activity debounce + 60s
  safety timer) replacing multiple overlapping intervals, so status
  polling no longer runs near-continuously on large repos (#7983).
- Let safety refreshes reuse cached numstat line counts instead of
  re-running diff --numstat every cycle, invalidated by head change,
  known mutations, and a bounded TTL.
- Thread AbortSignal/request-token cancellation through IPC, RPC, and
  relay layers so a superseded or backgrounded git:status call is
  killed instead of finishing wastefully.
- Fix automatic upstream/status apply ordering so a slow, older
  refresh can no longer clobber a newer result, and so an earlier
  refresh still applies when a later one fails.

* Fix aborted git status scans being mistaken for completed empty results

- An aborted scan/numstat pass now always rejects instead of silently
  resolving, so a cancelled request can't look like a valid empty status.
- Stop clearing the line-stats cache key on abort, since an aborted pass
  never wrote to it — clearing was evicting a concurrent scan's healthy
  snapshot and forcing a redundant numstat recompute.

* Fix aborted git status scans resolving as completed results

Cancelled scans could still resolve with partial or stale data instead of
rejecting, letting callers treat an aborted refresh as a valid status. Also
stop counting aborted scan duration toward catch-up refresh pacing, which
was stretching the next refresh interval by the full length of a cancelled
(often slow) scan.

* Add cancellable, generation-aware git status polling to cut stale scans

- Route git.status through an abortable subscription per requestToken so
  cancelStatus can actually abort the remote scan instead of being a
  no-op, preventing wasted work and stale responses overwriting fresher
  state.
- Bump the git status polling generation on push-target changes so an
  in-flight refresh against the old remote/branch can't apply stale
  upstream data to the new one.
- Guard the stale-conflict poller against writes after unmount.
- Retire pre-purge line-stat scans in the cache so an older in-flight
  scan can't repopulate a key after a token-scoped purge.
2026-07-15 19:09:14 -07:00
JinjingandOrca f495b39a6a Fix untracked line-stat cache thrash and add source-control scale benchmark (#8022)
* Fix untracked line-stat cache thrash and add source-control scale benchmark (#8013)

The untracked line-stat cache capped at 2,048 entries while a git status
scan can carry up to DEFAULT_GIT_STATUS_LIMIT (10,000) untracked entries.
A sequential scan over more files than the cap FIFO-evicted every entry
before the next poll revisited it (~0% hit rate), so every 3s status poll
re-read every untracked file's full contents. Measured with 64KB files:
warm rescan cost per file was 17x higher just past the cap.

- Size the cache to 2x the status entry limit and make eviction LRU
  (delete-before-set on hit and refresh) so a hot worktree's entries
  survive another worktree's scan.
- Add tests/e2e/source-control-large-file-count.spec.ts: a 5-scenario
  Playwright benchmark (pnpm run test:e2e:source-control-scale) that
  reproduces #8013 deterministically — event-loop stall, DOM node count,
  JS heap, and OS-level renderer working set at 5k/9.5k/11k changed files,
  plus a clean-repo control and a cache-effectiveness gate. Scenarios
  asserting bounded row mounting go green with the SourceControl
  virtualization fix (#7619).

Co-authored-by: Orca <help@stably.ai>

* Address review: historical cache comment + fixture cleanup on partial setup failure

Co-authored-by: Orca <help@stably.ai>

---------

Co-authored-by: Orca <help@stably.ai>
2026-07-09 22:33:55 -07:00
NeilandOrca 46646d7ff1 chore(lint): upgrade oxlint to 1.71 + enable 7 new rules (autofixed backlog) (#6841)
* chore(lint): upgrade oxlint to 1.71 and enable 7 new rules

Upgrade oxlint 1.67.0 -> 1.71.0 (1.72 was blocked by the repo's 3-day
minimum-release-age supply-chain guard; nothing here needs it). The
bump is a no-op on the existing config.

Enable 3 error rules (backlog autofixed to zero in this commit) and
4 warn rules (surface signal without gating CI):

error (autofixed, behavior-preserving):
- unicorn/prefer-node-protocol        (~1531 sites: bare builtin -> node:)
- typescript/no-import-type-side-effects (~36: all-inline-type -> import type)
- unicorn/no-array-reverse            (19: copy-then-reverse -> toReversed)

warn (real signal, current fires are test-only/correct):
- unicorn/no-array-fill-with-reference-type  (aliasing footgun guard)
- typescript/no-unsafe-function-type         (bans bare Function type)
- unicorn/prefer-array-flat-map              (map().flat() -> flatMap())
- unicorn/prefer-regexp-test                 (.match() in bool ctx -> .test())

mobile/.oxlintrc.json extends root, so it inherits all 7; the autofix
ran from root and covered mobile/ too.

Verification (all green): oxlint 0 errors (root+mobile+aux configs),
oxfmt clean, typecheck (node+cli+web), vitest 22795 passed / 0 failed,
builds (electron-vite + web + cli) succeed. node: rewrites confirmed to
skip embedded SSH/CLI string payloads (AST-only); all toReversed sites
verified to operate on fresh copies or write-once locals.

* chore(lint): bump mobile oxlint to 1.71 so inherited rules parse

mobile/ is a standalone pnpm project pinning its own oxlint@1.67, which
lacks unicorn/no-array-fill-with-reference-type (needs >=1.70). Since
mobile/.oxlintrc.json extends the root config, mobile CI's 'cd mobile &&
oxlint' failed to parse the new rule. Bump mobile to match root (1.71).

Verified in mobile/: oxlint 0 errors, oxfmt --check clean, tsc --noEmit
pass, vitest 978 passed / 0 failed.

Co-authored-by: Orca <help@stably.ai>

---------

Co-authored-by: Orca <help@stably.ai>
2026-06-29 22:38:29 -07:00
Neil dee34a653c fix: decode git cquoted status paths 2026-05-31 08:20:33 -07:00
Neil 30b93c6bf7 fix: parse numstat paths with nul output (#4098) 2026-05-31 04:15:23 -07:00
Trevin ChowandNeil b2b5cac9a9 Add per-file line counts to the source control sidebar (#2865)
* Add per-file line counts to the source control sidebar

Show +N/-N (green/red) next to each file in the Changes, Untracked, and
Committed-on-branch sections so the magnitude of a change is visible at a
glance. Counts are computed per staging area via `git diff --numstat`;
untracked/new files count their full contents as additions and binary
files show no count.

Consolidate numstat parsing and binary-buffer detection into shared
modules reused by the local status path, the SSH/relay path, and the
existing branch-compare code. Include added/removed in the status-entry
equality check so the sidebar doesn't re-render on unchanged polls.

* fix: harden source control line counts

---------

Co-authored-by: Neil <4138956+nwparker@users.noreply.github.com>
2026-05-26 20:09:54 -07:00