`tab group` wrote a field the GUI recomputes on every sidebar render from
the tab's repository root, so a heading set from the CLI was overwritten
before anyone could read it. The command is gone; the read-only GROUP
column stays, and the docs now say where its value comes from.
Alongside it:
- `tty7 new --open` tells a failed request apart from a missing GUI
instead of reporting both as "no GUI is running", and its warnings
carry the `tty7:` prefix the rest of the CLI uses. Neither is an exit
code: the workspace exists by the time we ask.
- The switcher measures unclaimed workspaces against the rows already
listed rather than against the store that put them there, so this
window's own workspace cannot show up twice.
- `on_workspace_deleted` gets a test for its destructive half — the one
that erases state only this client holds.
- The empty-tree write-back says why it covers remote workspaces too,
and both unreachable `WorkspaceDeleted` arms say they are unreachable.
- `TabView` is no longer serialisable: it is a reading of the machine
tree, and both sides that want one have the tree already.
- New tests for the `tab ls` table and its JSON.
Five places where a workspace, a tab or an attachment was real on one side
of the socket and invisible on the other. They share a root: the GUI kept
its own list of which workspaces exist, and consulted the machine tree only
for the ones it already knew about.
- The switcher listed only workspaces this client had opened, so anything
the CLI made was missing from the GUI entirely — `tty7 new` looked like
it had done nothing. The local group now merges what the machine holds,
the way the remote groups already did, and `claim` keeps the id it was
handed instead of quietly opening a fresh workspace beside it. Opening
one hydrates from the tree whatever `restore_session` says: the setting
decides whether a window comes back at launch, not whether an open one
shows what is really in it, and the alternative was saving an empty
session over live tabs.
- A workspace deleted from another client left its row behind here, opening
onto nothing. It is now forgotten with it. A window still showing one
keeps it — `ws rm` leaves the panes running — and puts the workspace back
under the same id rather than carrying on writing to a tree that has no
record of it.
- `tty7 ls` could never fill its ATTACHED column: `Workspace::attachment`
was `serde(skip)`, which kept it off the disk as intended and off the
wire as a side effect, so a workspace held by a GUI window read to every
other client as unheld. It now travels, minus the token that proves the
hold, and is stripped when the document is written instead.
- `tab ls` and `ws tree` printed `tab.name`, which almost no tab has: the
GUI's strip names tabs from OSC titles the tree never sees. Both now fall
back through agent, cwd leaf and process name — the same ranking the
switcher uses, moved into the core so there is one of it — and `tab ls`
gained a GROUP column.
- `sidebar_group` was readable from the CLI and writable only from the GUI;
`tab group @TAB [GROUP]` closes that.
Also `tty7 new --open`, which asks a running GUI to put a window on the
workspace it just made: `GuiOpen` now carries a workspace id, since a
workspace with an id has no business being routed to whichever window was
focused last.
* add CLI support for opening directories in new tabs
f
* feat(windows): add optional windows explorer context menus
f
* fix(gui): restore missing windows and reject lossy paths
* fix(windows): harden explorer menu registration and native path handling
* fix(cli): preserve native GUI paths on Windows
---------
Co-authored-by: thomas <thomas@gmail.com>
Co-authored-by: l0ng-ai <24760907+l0ng-ai@users.noreply.github.com>
capture_plain_returns_text_not_escapes gated its byte-level asserts on
the marker reaching the rendered capture, then asserted the raw capture
already carried a CR. The two captures are separate snapshots taken in
sequence, and on Windows ConPTY re-emits the echoed command in
escape-laden bursts: the marker can render (from the typed input line)
while the slightly earlier raw snapshot has yet to see a single CR —
Enter's CRLF only arrives with the command's execution. CI hit exactly
that window on x86_64-pc-windows-msvc.
Make the CR part of the settle condition the loop polls for, alongside
the marker, and name both in the timeout message so a genuine
CR-stripping regression still reads as one.
Co-authored-by: l0ng-ai <ysdpk123@gmail.com>
Three holes in the wait primitive, all of which make a delegation loop
answer with something other than what it asked for.
The agent status the server keeps is a level, not an event: `done` stands
until the next turn begins, `waiting` until the agent moves again. A wait
issued right after a `send` therefore returned last turn's state before
the worker had even read the input, and a second task in the same pane
matched `--until done` instantly. `--changed` snapshots the position the
wait arrived at — status plus the activity counter, which ticks even when
the status letter does not — and refuses to match it; the JSON carries
`stale` so a plain wait can tell whether the answer might be a leftover.
`exit` was unreachable for any pane that had ever had an agent: the
snapshot has no liveness in it, and the daemon keeps a dead pane
registered until it is closed. A worker that crashed mid-turn reported
`working` until the timeout. Liveness is now re-checked from the tree
every few polls; the fast path where the first poll already answers still
costs exactly one request.
The "pane exited before reaching the awaited state" branch built its JSON
and then threw it away on an anyhow error, leaving `--json` with nothing
to read and the exit indistinguishable from an unreachable daemon. It now
exits 1 with its report.
Also: the wire spelling of a state is written out instead of derived from
the variant name, the sleep no longer overshoots a near deadline, an
absurd `--timeout` cannot overflow, and `--interval` is range-checked at
parse time rather than silently clamped.
* feat(cli): `tty7 wait` + the agent-coordination note
The two pieces of the original session-CLI PR that main's own CLI
doesn't cover, rebuilt as a minimal delta against it.
`tty7 wait %N --until waiting,done --timeout 600` blocks until a pane's
agent reaches a requested state — the orchestration primitive that lets
one agent sleep until its peer blocks on a permission prompt or
finishes a turn, instead of screen-scraping. A poll of `AgentStates`
rather than an `events` subscription on purpose: a one-shot stateless
question composes into scripts, survives a server restart mid-wait, and
needs no cursor management. Agentless-but-live panes read as idle via
the machine tree; a dead or vanished pane reads as exit, which ends
every wait (matched only when asked for). Timeout exits 124, the
`timeout(1)` convention.
The coordination note is discovery for the whole CLI: a marked,
idempotent block describing the verbs, installed into
~/.claude/CLAUDE.md (always; CLAUDE_CONFIG_DIR honored) and
~/.codex/AGENTS.md (only when ~/.codex exists). A one-time "Let your
agents coordinate?" prompt fires the first time a pane detects a coding
agent; a Settings → Agents switch drives the same install/remove, with
state read from the files themselves. Uninstall strips exactly the
marked block; an unterminated block is left alone rather than truncated
at a guess.
* feat(agents): replace the global note with an orchestration skill
Per review: global instructions tax every session's context and hand
every agent — workers included — the ambient authority to orchestrate
its neighbours. The common shape is primary → workers: one agent owns
decomposition, dispatch, waiting and aggregation; workers just do
bounded tasks.
A Claude Code skill fits that exactly. `core::orchestration_skill`
installs ~/.claude/skills/tty7-orchestration/SKILL.md — only its
one-line description rides in context until the user or the primary
agent explicitly invokes it, and workers never see it. The body can
therefore afford the full delegation loop (tab new → send → wait →
answer-or-capture → pane close) instead of a token-starved cheat
sheet.
The file is wholly tty7-owned: install is a plain overwrite (also the
version-refresh path), and uninstall keys on an ownership marker so a
user's hand-written skill under the same name is refused, not deleted.
Gone with the global note: the first-agent-detected prompt, its config
flag, and the CLAUDE.md/AGENTS.md writers — the Settings → Agents
switch now drives the skill install instead.
---------
Co-authored-by: l0ng-ai <ysdpk123@gmail.com>
The CLI's own --help calls it "built for coding agents", but `capture` handed
back the daemon's raw PTY bytes, which is the least readable thing it emits,
and every verb panicked when its reader hung up.
`capture --plain` replays those bytes through a terminal grid instead of
stripping escapes from them, using the same alacritty_terminal rev the GUI
renders panes with. The difference is not cosmetic: only the grid knows that a
break at the pane's width was a wrap rather than a newline, that a CR meant
"overwrite this line" rather than "end it", and which cell a wide char shares
with its spacer. A regex gets the easy 90% and then invents the rest — on one
real pane it turned 1193 lines into 2806.
The size each segment needs comes for free: the daemon already sends
DaemonMsg::Size right before every Snapshot, and the CLI was discarding it.
Panes here measure 249 and 86 columns, so the hardcoded 120 would have wrapped
both in the wrong places. Observing still resizes nothing.
The pipe fix is two mechanisms with one contract. On Unix SIGPIPE goes back to
its default disposition, which covers every write site at once and ends the
process the way it ends `cat` (141). Windows has no such signal, so stdio::out
recognizes the hung-up write and leaves quietly. Before this, 16 of 19 verbs
printed a panic and a backtrace note for `tty7 ls | head -1`; `run` instead
reported it as a failure with exit 1.
Also adds skills/tty7, the Claude skill for driving this CLI. It shipped with a
Python ANSI stripper, which is what prompted --plain; the script is gone.
alacritty_terminal moves to [workspace.dependencies] so the GUI and the CLI
cannot drift onto two revs of the fork.
`tty7 tree` answered "launching the GUI is not wired up yet (would open tree)".
Bare `tty7 [PATH]` opens the GUI, so any word clap has no subcommand for lands
in that positional — every typo came back as an offer to open a directory named
after it.
A word with no separator, no leading ./~, and no matching file on disk is a
mistyped verb, and is now reported as one. Real paths still reach the launcher
and fail there for the honest reason.
Also: `ws`'s help said "the named session trees", missed by the session -> shell
pass, and long_about still advertised $TTY7_SOCKET, which no longer exists —
it is $TTY7_CONFIG_DIR now.
Manual testing found `tty7 run`, `send`, `capture`, `procs` and `split` broken
against any normally-installed server — the CLI's entire hot path. Only the
control verbs worked.
Two endpoints, two rules. The pane socket came from the config dir; the control
socket ignored it and sat in $XDG_RUNTIME_DIR/tty7 or ~/.local/share/tty7 —
under the same basename, `daemon.sock`. So they were told apart by directory
alone, and the CLI, handed one path in TTY7_SOCKET, reconstructed the other with
with_file_name: on the default layout that returns the input unchanged. Pane
verbs dialed the control socket and the daemon hung up on them. A --config-dir
server was worse: it published the *default* control socket to the shells it
spawned, so a CLI inside an isolated instance drove a different server.
The e2e suite passed throughout because its harness set TTY7_CONTROL_SOCK
explicitly, placing both endpoints in one directory under different names — a
layout production never produces. It had removed the bug's precondition.
Now: the control socket is derived from the config dir like the pane socket
(control.sock beside daemon.sock, mirroring Windows' control.port/daemon.port,
with -control on the hashed fallback so the two cannot collide), and panes are
handed TTY7_CONFIG_DIR instead of a socket path. A CLI inherits it, so
ControlClient::connect and PaneClient::local resolve the same two sockets the
server opened, through the same functions. No second derivation to disagree.
remote_link's remote_control_socket was a third copy of the old rule, used to
locate a remote server's endpoint before connecting; it follows the config dir
too, and the env probe now reads $TTY7_CONFIG_DIR.
Drops the CLI's server-lifecycle guard: stop/start already follow the config dir
through transport::connect and --config-dir, so there is no longer a mismatch to
refuse. The e2e case that covered only `status` over a lone variable now also
runs a pane verb — the asymmetry it missed is exactly what broke.
Note: this moves the control socket for existing installs. A running pre-change
daemon will not be found at the new path, which is the honest outcome — its
control dialect is v3 against this build's v4, so reaching it only produced a
version error anyway.
An interrupted `tty7 run` leaves its pane running with nothing referencing it:
no workspace holds it, every listing walks the tree, and the orphan sweep only
logs. `pane ls --all` reads the server's registry instead and marks what nothing
holds; `pane close` falls back to hanging a pane up directly when no workspace
can route a PaneClose, so an orphan is stoppable.
--quiet silenced failures as well as successes, leaving a bare exit code and
nothing to debug; it now suppresses only output on success, and covers --json
too. `run` exited through a path that skipped the report entirely, so
`run --json` printed nothing at all; it now carries its report, with
exit_code_known distinguishing the command's own 1 from the stand-in 1.
The server lifecycle verbs can only drive the default endpoint — spawn::stop
dials transport::connect() — while every other verb follows $TTY7_SOCKET. They
now refuse when that names a different endpoint rather than acting on a
different server than `tty7 status` reports on.
Also: tables pad by display width, so a CJK name or path no longer skews every
column after it; --h/--v become --horizontal/--vertical with the short forms
kept as aliases; the verbs that are not implemented say so in --help instead of
only at runtime; capture's help admits it decodes as lossy UTF-8.
- workspace: tty7-cli joins default-members, so a bare root cargo test runs it
- run --keep files the pane into its workspace via TabCreate (and refuses to
keep a pane no workspace would list); --ws help says what it really does
- server start|stop|restart|logs refuse -m instead of silently acting locally
- server start kills the spawned process when it never opens its endpoints
- -m over a down link is refused instead of redialing with auto auth
- capture help tells the truth: raw ANSI bytes, last ring segment by default
- a missed exit-code probe exits 1 with a stderr note, not a fabricated code
- TTY7_SOCKET is honored: control dials it, the pane endpoint is its sibling
- attach's success JSON says attached, not detached_from
- e2e daemons ride a KILL_ON_JOB_CLOSE Job Object on Windows, so a hard-killed
harness cannot leak servers
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_014JPaaZVK7rfQPKyrymzsYv
StubBackend is gone; RealBackend lazily opens a ControlClient for control
ops and a PaneClient for pane ops. Backend::spawn_shell now returns the
daemon-assigned pane id, so every creating verb (new, tab new, split)
spawns first and seeds the tree op with the real id — client-side pane-id
allocation is deleted. Live end to end: ls, ws/tab/pane verbs, new, send
(attach-input-detach), capture (observer replay; --scrollback = whole
ring, default = the ring's last segment), procs, run (streams output,
passes the child's exit code through, --keep leaves the pane), events
(human lines or NDJSON), agents, status, machine ls, and doctor's server
half (reachability, dialect, status, links). tty7 server start|stop|
restart|logs manage a sibling/PATH/TTY7_SERVER_EXE tty7-server. -m routes
both channels over the local server's link, resolved against Routes by
key or bare host; jump/proxy-chained keys are refused with the reason.
Interactive attach stays stubbed for the next slice. A harness-free e2e
suite drives the compiled tty7.exe against an isolated real server.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_014JPaaZVK7rfQPKyrymzsYv
The thin console CLI from docs/cli-design.md, transport-free for now:
- clap grammar for the full documented surface: ws/tab/pane/machine/server
nouns, the hot-path top-level verbs (ls/attach/run/new/split/send/capture/
procs/agents/events/status/doctor), global -m/--json/-q, `run -- <cmd...>`,
and bare `tty7 [path]` parsing as the GUI launcher stub.
- tmux-style addressing (%42 pane, @7 machine-wide tab ordinal or @<uuid>,
workspace by name / id / unique id prefix) with implicit-context fallback
to TTY7_PANE / TTY7_WS and a "not inside a tty7 shell" error naming the fix.
- Backend trait as the integration seam: control() speaks real
tty7_core::daemon::control ControlRequest/ReplyOk values, plus declared
pane-side entry points (spawn_shell/send_input/capture/procs/attach_pane/
run/events). StubBackend fails loudly until the transport client lands;
MockBackend asserts the exact request shapes every structural verb builds.
- Plain aligned tables and trees for ls/tree/pane ls, one JSON object per
command under --json. Exit codes: 0 ok, 1 failed, 2 usage (clap default).
agents/status/machine ls stay stubbed: they need ControlRequest::AgentStates/
Status/Routes, which another slice is adding; ws stop and server start/stop
likewise wait on their mechanisms rather than inventing protocol.
Build/test this package alone (cargo build -p tty7-cli): its bin is named
tty7 and collides with the GUI bin until that one is renamed.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_014JPaaZVK7rfQPKyrymzsYv
l0ng-ai
l0ng-aiandl0ng-ai
yetoneandl0ng-ai
ayamir
