mirror of
https://github.com/l0ng-ai/tty7.git
synced 2026-10-03 08:02:02 +00:00
39ceb35fdd75bfc4b47f5600f71bddcff9e977b1
12
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
 l0ng-ai
|
b5cb6efe7a |
style(sidebar): mark pinned groups with ◆ instead of a pin icon, drop the divider (#972)
The pin icon read as a smudge at header size. Kept groups now carry a small ◆ beside their name — every kept group, label groups too, since with the divider gone it is the one thing that tells kept from derived. On a folder group the mark is still the click that unpins it, and the hover button that pins an auto group shows the same character. The divider is no longer drawn at rest. It keeps its (smaller) place in the layout and its recorded bounds, so pinning a header by dragging it up and handing a tab back by dropping it below behave exactly as before, and it still shows as a line while it is the drop target. |
||
 l0ng-ai
|
cf0e8f02e6 |
feat(sidebar): pinned groups above auto groups (#962)
* feat(sidebar): keep pinned groups on the workspace and derive the rest Replace the sidebar's hand-made groups with the model from #955: the sidebar groups tabs by repo automatically, and you pin what you want to keep. - Pinned groups (`PinnedGroup`: id, optional name, optional folder, fold) are stored on the workspace in the machine tree, in display order, and a tab points at one by `GroupId`. Everything else is an auto group worked out every frame and never stored: by repo home, or by `user@host` for an SSH pane — native or a shell that ssh'd onward — so `/home/ubuntu` on two machines no longer lands under one header. - A tab whose cwd *enters* a pinned folder joins it (deepest folder wins; a repo home equal to the folder counts, which keeps worktrees with their repo). It is edge-triggered through `EntryWatch`, so a tab dragged out while still inside the folder stays out until it leaves and comes back, and a tab restored at launch is not pulled in by where it already sits. - Groups sync as one `WorkspaceSetGroups` / `GroupsChanged`, pushed only from an edit and adopted from every pull, so a fresh window can never push an empty set over the workspace's. The machine hands tabs naming a dropped group back to auto grouping in the same mutation. Control dialect → v11. - Config: `sidebar_grouping` (three modes) and `sidebar_collapsed_groups` give way to one `sidebar_auto_grouping` toggle; folds live with the workspace. - `tty7 tab ls` reports the pinned group a tab is in (name or folder leaf; JSON carries id, name and folder). * feat(sidebar): draw pinned groups above a divider, with their own gestures The sidebar now reads as two halves: the groups you keep, in the order you put them, then a divider, then the groups it works out (Arc-style). - Pinned headers drag-reorder among themselves (their own reorder surface, so a pinned header cannot be dropped among the derived ones); the order lands on the workspace's group list, not on the tabs. - An auto header carried above the divider is pinned when let go. With nothing pinned yet the divider appears during that drag as a "Drop here to pin" zone, since a hairline at the top of the list is nothing to aim at. - A tab kept in a pinned group and dropped anywhere below the divider goes back to auto grouping; the divider lights to say so. - An empty pinned group stays, with a "+ New Tab" row that opens a tab in its folder (or where ⌘T would, for a label group) and files it there. - Folder groups carry a pin mark that unpins on click and a tooltip with the folder; auto headers show pin and "+" on hover. - Header menus: pinned — Rename, Set Folder… (local workspaces), Use Current Tab's Folder, Clear Folder, New Tab, Unpin (folder groups), Delete. Auto — Pin Group, New Tab. Nothing renames an auto group; nothing pins implicitly. * feat(sidebar): open folders as pinned groups from Finder, the file tree and the palette Every way into a pinned group the design calls for: - Drop a folder from Finder or Explorer onto the sidebar to pin it (a local workspace only — a dropped path is this machine's, and a folder group keeps a directory on the workspace's host). Files are let fall. - "Pin as Group" on a folder in the file tree, on local and remote workspaces alike, since the tree and the group are both on the workspace's host. - Palette "New Group" makes an empty label group and opens its name for typing; "Open Folder as Group…" picks a folder with the system picker, pins it and opens a tab in it. The picker browses this computer, so that one is not offered on a remote workspace. - Tab right-click "Move to Group" lists the pinned groups plus "New Group…", which files the tab in a fresh label group with its name open for typing. Pinning a folder already pinned hands back the group that keeps it rather than making a second one to split its tabs with. * fix(sidebar): let groups that arrive from elsewhere pull no tab into a folder A window draws its first frames before its copy of the workspace's groups lands, so every tab's entry watch recorded "in no folder" — and the groups landing then read as each tab walking into its folder. A restored tab, or one dragged out of its folder group, was pulled back in on every launch. Groups adopted from a pull or from another window's `GroupsChanged` now start every tab's watch over from where it is; only this window's own pin gathers the tabs inside the folder, and says so tab by tab. A tab also goes up with the group it names even when the window does not know that group yet, so a sync in that same gap cannot send every kept tab back to auto grouping. * docs(sidebar): describe pinned and auto groups, and log the change Rewrite the sidebar page's grouping section around "grouped by repo automatically; pin what you want to keep": the divider, folder and label groups, the edge-triggered join, every way to pin, and the header menus. The configuration reference swaps `sidebar_grouping` for `sidebar_auto_grouping`, the CLI reference describes the GROUP column as the pinned group, and the changelog gains an Unreleased entry (#955). * fix(sidebar): file a tab opened by the CLI in a pinned folder into it A tab that reaches a window as TabCreated — from `tty7 tab new` or another window — started its entry watch as a restored tab, so opening one inside a pinned folder left it in the auto group below. It is as new as a tab opened here, and now joins the folder like one; every window that hears of it reaches the same answer. * test(machine): build the group sets in their initializers Clippy's field_reassign_with_default on the two WorkspaceGroups the set-groups test assembles. * fix(sidebar): draw restored tabs in their auto group, and title by repo again Auto groups are not stored, so after a restart every tab sat in Ungrouped until its own repo probe came back, then jumped; before pinned groups the stored repo key put it in place on the first frame. Each tab now carries `last_auto`, the auto group it last resolved to, as a hint: stored with the tab, sent up alongside its group in `TabSetGroup` whenever the live answer moves, and used to draw the tab until the probe answers. The probe always wins and rewrites the hint, and the hint never outranks a pinned group or the folder-entry rule. Another window's hint only fills a gap, so two windows can never bounce a disagreement between them. The workspace's fallback title regained the repo majority it lost: the most common pinned folder first, then the repo most unpinned tabs were last filed under (a worktree counting toward its repo home), then a pane's cwd. * refactor: drop what the new sidebar left unused, and two clippy findings - `TerminalView::native_ssh_cwd` and its helper existed for the sidebar's old folder grouping of native SSH panes; an SSH tab now groups by host, and nothing else read it. - The file tree's context menu takes `cx` instead of `danger` and the new groups flag, back to the argument count it had on main. - A title test builds its workspace in the initializer. |
||
|
l0ng-ai
|
27483e893d |
feat(ui): collapse the New Tab menu's shell list to three by frecency (#960)
The + menu listed every shell the machine reports (nine on a stock macOS box)
above the SSH hosts. The Local section now names the default shell, always
first, then only shells that have actually been opened, by frecency, three rows
at most, the same way the SSH section caps its hosts.
Shell usage is recorded in a new `shell_frecency` config map, keyed by the
inventory label, bumped from both the menu row and the palette. Every shell is
now a palette command titled "Shell: {label}" (same word in every locale), and
an "Other Shells…" row opens the palette pre-filtered to them. That row is
hidden when the menu already names the whole inventory. Running a shell command
from the palette respects the ⌥/Alt split modifier like the menu row.
|
||
|
l0ng-ai
|
de15f9b0ab |
feat(ssh): keep saved hosts in servers.json and add an SSH tab title setting (#952)
Saved SSH hosts and their usage counts move out of config.json into servers.json beside it, so config.json can be synced between machines without carrying a server list (#911). An older config.json is split on first load: servers.json is written first (0600), then only the two keys are removed from config.json, leaving every other key as it was. When both files hold hosts, servers.json wins and the stale copy falls out of config.json at its next save. A servers.json that does not parse is kept aside and blocks saves, as config.json does; hand edits hot-reload. Settings -> Window & Tabs -> SSH tab title (`ssh_tab_title`) pins an SSH tab to the profile name (saved host name, ~/.ssh/config alias, or the address typed for a quick connect) or the hostname, on the OSC title's rung of the existing label ladder: a renamed tab still wins, OSC titles are still tracked, local panes are untouched (#726). |
||
|
l0ng-ai
|
fed4aec170 |
docs: replace placeholder screenshots and add a one-minute tour video
Every placeholder frame in docs/ now shows a real capture of the current build: 20 screenshots plus two short looping clips (prompt editor, pane drag). The README and the docs home page link a one-minute tour covering agent status across repos, one agent driving another through the CLI, the prompt editor, diffs, pane dragging, and sessions surviving a quit. |
||
|
l0ng-ai
|
958d8b7442 |
feat(window): dock the code panel and the diff overlay beside the terminal (#625) (#685)
* feat(window): dock the code panel and the diff overlay beside the terminal (#625) Opening a file covered the workspace. The terminal underneath kept running and was neither visible nor typeable, so reading a file while an agent talked was a toggle loop: open it, close it to read the reply, open it again. The Files tree already docks; the two surfaces you go to *from* it did not. They dock now, as a flex sibling of the terminal column rather than a narrower overlay — that distinction is the feature. `set_grid_size` is driven by the terminal element's laid-out bounds, so a column takes width away from the grid and the PTY reflows into what is left; a card painted over half the workspace would have left the grid full width with half of it hidden. `overlay_top` stops ordering a pair and starts choosing between them: a column has one child, and two `flex_1` siblings would split it and fight. Fill mode keeps the old vector, the old opaque paint and the old platform hoist untouched, so nothing about today's overlay changes for anyone who picks it. - Half the terminal column by default; drag the divider, double-click it to cycle a third / half / two thirds, or use the palette commands. Two thirds deliberately runs past the half-window cap the side panels obey — only the terminal's floor binds it. - `DOCUMENT_MIN_W` joins the width budget: both side panels reserve it the way they already reserve each other, and the column is derived from the *live* sidebar and panel widths rather than their floors, so a panel someone dragged wider is width the terminal keeps. - A window too narrow to seat both fills for that frame. The fallback is derived at render time and never stored, so widening re-docks on the next frame with nothing to undo. - Fill or dock is per tab, on the header's context menu. Reading a long file over the whole window in one tab while an agent keeps half of another is the normal case, and one global switch made each of those flip the other. A tab that has not been told reads `document_layout` from the config, which is what a fresh tab starts as — and which the menu therefore does not write, since every untold tab is reading it. - Everywhere but macOS the title bar spans the workspace, which left a bar's height of nothing above the column. The header is drawn into it, and behaves like the title bar it now sits in. With the detail panel closed the column reaches the window's right edge, so the header stops short of the trailing chrome through a width the tab strip's own reservation shares. - The docked headers drop the traffic-light inset they never had to clear, and the diff header's branch name becomes the thing that yields so the view toggle and the close tile survive a column's width. New in `config.json`: `document_ratio`, and `document_layout` for what a fresh tab starts as. Four new actions, bindable and unbound by default. * fix(window): hold the docked column to widths the strip and the file agree on Three defects in the document column, each with a guard test that fails without its fix. The tab strip did not know a column had taken width off it. On macOS the strip lives inside the terminal column and sizes itself to the window less the detail panel, so a docked document left it 340 points wider than the column it sits in and the chips ran on under the column — the same overrun the panel's own reservation was added for. Everywhere else the strip spans the workspace and the column's hoisted header is drawn over its trailing end with no fill of its own, so a chip left under it showed through the file name and stayed clickable through it. The column's width now comes off `strip_w` on macOS and off `corner_w` elsewhere, which is where the panel's already goes. The divider wrote widths the file would not keep. `Config::sanitize` holds `document_ratio` to 0.2..=0.8; the drag clamped in pixels only, so a column pushed against either edge of a wide window was saved outside that band and reopened somewhere else — on a 2560-point body, 232 points from where it was dropped. The band is a pair of shared constants now and the drag clamps to it, the way the font size and its stepper were made to agree in #550. The palette named the config's layout rather than the tab's. Fill is per tab, so a tab told to fill was still offered "Document: Fill Window" — a row that named the state it was already in and did the opposite. It reads the active tab through `ChromeState` now. Also: `document_layout`'s doc comment still described the global switch an earlier draft had, three lines after the field became a per-tab default. |
||
 l0ng-aiandl0ng-ai
|
9fc0f331e8 |
feat(tabs): drag a tab in as a pane, and a pane out as a tab (#651)
* feat(tabs): drag a tab in as a pane, and a pane out as a tab A tab dragged by its chip or its sidebar row can be dropped over the panes to become one of them, and a pane dragged by its grip can be dropped on the strip or the sidebar to become a tab of its own. Both carry the panes across as they are: nothing is spawned and nothing is killed, so a shell mid-command, an SSH session or an agent mid-turn keeps running. The landing is read the way a pane drag's already is, minus the middle: an arriving tab has nothing here to trade places with, so a pane's core means "split it the way it is longest". A tab that was itself split arrives with its own shape intact and takes one share of the row or column it joined. A pane on its way out is offered a caret between two tabs, and the last pane in a tab is offered nothing, being a tab of its own already. Picking a tab up no longer switches to it: the strip and the sidebar now activate on the click rather than on the press. Without that the merge cannot be expressed at all — pressing the tab to drag it would put it on screen, leaving no other tab to drop it into. Two things in the machine tree had to follow: * Panes that change tabs are told as PaneMove, one at a time, rather than as a tab closing and another being rebuilt around them. * The tabs the machine already has are reconciled before new ones are created, so a pane leaving for a tab of its own is given up by the old tab before the new one asks to register it. The machine refuses a pane that is in two tabs at once, and the refusal desynced the window. Closes #621 * test(tree-sync): a tab grafted above a whole layout still converges * fix(tabs): keep a click on the close button from switching tabs Switching on the release rather than the press means every click inside a chip or a sidebar row now reaches the row itself, and gpui-component's `Button` does not stop propagation on a click it handled. So one click on a tab's close button ran `close_tab(i)` and then `activate(i)` — with `i` by then naming whichever tab had slid into that slot, which moved the active tab somewhere nobody asked for. A click into the rename field did the same: it switched away from the tab whose name was being typed, and took the focus out of the field with it. Both now hold the click where they handled it, the way they already held the press. --------- Co-authored-by: l0ng-ai <24760907+l0ng-ai@users.noreply.github.com> |
||
 webdev
|
422808191d |
feat(sidebar): group a tab by its folder when its cwd is not a repo (#631)
`sidebar_grouping` gains a third, opt-in mode, `repo-or-directory`: group by repository home as before, and when the repo probe has landed and answered "not a repo", group under the cwd itself instead of filing every such tab under Scratch. A probe that has not run yet resolves to no decision, so a tab keeps the group it already has rather than bouncing through Scratch mid-probe. The decision lives in one `resolved_group` free function shared by the per-frame key derivation and spawn-time seeding. The default (`repo`) and flat modes behave exactly as before, and an unknown value in an existing config still degrades to `repo`. Knock-on: `machine_mirror::subject_path_of` names a window after its most common group, so in the new mode a window of plain shells takes its name from the most common directory rather than from the first pane's cwd. Closes #620. |
||
|
l0ng-ai
|
1424da0891 |
fix: nine UX fixes across the diff overlay, layout, settings and pane spawn (#623)
Found by driving a dev instance and measuring what an idle window costs. Two of them were frame loops that never stopped. A `Head` diff overlay calls itself stale when the cached git status disagrees with the snapshot on screen, and every landed probe wakes that check by touching the cache — but the read published its counts and left the branch behind, so a branch switched outside tty7 made the disagreement permanent: two `git` processes a lap, forever, with `refreshing…` pinned to the header and an idle window at 7% of a core. And the home page asked for a frame sixty times a second to change one glyph's opacity twice, which made a window with nothing open in it eight times more expensive than one running a shell. Both now settle: the diff read publishes the branch it found, and the home cursor flips a bool on a timer the way the terminal's own does. The rest: - The tab sidebar and the right panel each capped themselves at half the window and knew nothing about the other, so together they could take all of it — 260 points of terminal on a 720-point window. Both now cap at whichever binds harder: half the window, or what is left after the terminal's floor and the other panel's floor. The same cap bounds the drag, so a panel dragged to its limit stays where it was dropped. - Only a HEAD diff may correct the sidebar's counts. Those numbers mean `git diff --numstat HEAD`; an unstaged or staged patch answers a smaller question, so opening an untracked file from the Source Control panel took the staged lines off the total on the click. - An untracked row in the diff overlay had no click target, and once focused could not be left — the breadcrumb looks the path up in `files`, where an untracked file has no entry. Both ends fixed. - A new pane keeps the name its directory was reached by. `cwd()` alone loses it: the shell falls back to `getcwd()`, so `/tmp/x` became `/private/tmp/x` in every tab opened from the first. `PWD` carries it, and POSIX has the shell discard a `PWD` that names the wrong directory, so this can correct the name and cannot invent one. - The settings search now sees into the Keybindings page, which is generated from the binding table rather than the static index — so searching for a feature finds its shortcut, and the page filters to the matches. Closes #444. - The settings reading column is centred rather than pinned to the nav: on a window as wide as the display it was made for, 640 points of settings sat beside 1600 points of nothing. - `New Workspace…` takes the ellipsis its three sibling actions already carry — it opens a form asking for a name and a host. Every fix has a test. The re-probe loop is pinned end-to-end with `render_probe::draws() == 0` against a real repository, confirmed to fail on the old behaviour before it was kept. |
||
|
l0ng-aiandl0ng-ai
|
b7196ae49a |
Give the side panel's Info tab rows that do what they show (#531)
* feat(right-panel): give the Info tab rows that do what they show The panel's Session table rendered every fact the same inert way, and its two actions sat in a strip of their own under the whole list — unlabelled, four rows below the path they acted on. Rows now carry their own shape: `changes` is the sidebar's green-and-red `+N −M` and opens the same diff overlay under the same setting, an agent wears the same status dot its tab does, and what a row can do appears at the end of it on hover, in the strip Source Control rows already use. A port row hands over its address instead of leaving it to be retyped, and the lit panel tile closes the panel the way every other activity bar does. * fix(right-panel): answer for the row the pointer is actually on Review of #531 found the new rows promising more than they could keep. Port rows keyed their element id on the port alone, but a port is only unique with its pid — a pre-forking server puts one row per worker on screen, and gpui handed them a single interactive state, so a click on one lit the tooltip and the pressed fill on all of them. The `changes` counts were read off `Tab::git_status`, which resolves a split tab to its *first* leaf, while the click target came from `detail_pane`, which resolves it to the *last focused* one. Inert text could disagree harmlessly; a button could not, and clicking `+2 −0` opened another pane's repository. Both now come from the pane the rest of the rows describe. A port is only `localhost` if localhost reaches it. `lsof`'s bind address was parsed and dropped, so a server on `172.17.0.1:8080` was offered as `localhost:8080` — a refused connection, or somebody else's service. `PortEntry` carries the address (`serde(default)`, so an older daemon still answers), and the wildcard and loopback binds keep the `localhost` spelling anyone would type. The browser tile hung off `remote_context()` — where the *shell* is — though the ports come from the pane's own process tree either way. It hid the tile on the one pane where it works, a `ssh -L` forward listening on this machine. It is about the host now. The action strip is opaque and pinned to the row's right edge, so on the working-directory row it covered the leaf that the head-first elision exists to preserve. The value holds that width back for good rather than on hover: taking it on hover would re-elide the path under the pointer, which is the pixel-shifting the strip is absolutely positioned to avoid. Also: the counts were `flex_1`, so the whole rest of the line was the button and empty space underlined numbers it was nowhere near; the agent pip was pinned in pixels inside rem-sized text and slid off its line at any interface scale but 100%, and drew Waiting as a thin ring where the tab strip punches a hole in a filled dot — one rule, two dialects; the panel-toggle chrome tile, which on macOS lives inside the panel it closes, still dropped focus into the destroyed element and left ⌘J dead; and `scm/detail.rs` kept a third copy of `ROW_INSET`. --------- Co-authored-by: l0ng-ai <24760907+l0ng-ai@users.noreply.github.com> |
||
|
l0ng-ai
|
00e1aa8218 |
docs: correct claims that no longer match the code
Audited every page under docs/ against the source. Fixes for what the code actually does: - agents: the status vocabulary is idle/working/waiting/done, not running/waiting/idle; hook rows grow a separate Uninstall button; the Settings table labels read "Copilot CLI" and "Grok Build"; Copy Session ID lives in the tab's context menu, not the pane's - cli: `pane ls --all` reports the owning workspace id, not "tty7-cli"; document bare `tty7 [PATH]` as the GUI launcher it is instead of listing it as unimplemented; note `active_tab` and the `diagnostics` array; wait also defaults to $TTY7_PANE - git: the branch dropdown is a plain list with no search box and no stash-and-switch, and checkout is not a palette command; quote the diff overlay's own overflow notice rather than the sidebar's - window: the unread marker tracks a finished agent turn, not any output; rows cannot be dragged across groups; the sidebar and `tty7 tab ls` resolve labels differently; drop Toggle Commit History and Checkout to from the palette's Git group; ~/.ssh/config aliases are not palette entries - terminal: Ctrl+R dedups by command text and shows no directory; Esc does not dismiss a ghost suggestion; document Cmd+Enter - remote: GSSAPI is an ordinary Auth choice, not a managed-connection-only mechanism - fonts: Maple Mono NF CN leads the chain on Windows and Linux only; list the real per-platform defaults - settings paths: the three Links settings and per-pane history were filed under the wrong sections |
||
|
l0ng-aiandl0ng-ai
|
707fd1867b |
docs: add a Mintlify documentation site (#478)
38 pages under docs/, written against the source rather than the README: config keys and their clamps from core::config, default keybindings from ui::keymap, every CLI verb and flag from tty7-cli, agent aliases and hook/fork/resume support from core::cli_agent, and Settings paths taken from the actual en-US strings. docs/features.md and its zh-CN translation are retired — everything in them now lives in a page of its own, plus the two things they carried that nothing else did (IME input, the performance notes). README and README.zh-CN point at docs/ instead. Screenshots and videos are placeholders for now: docs/images/placeholder.svg with a caption naming what each shot should be. Co-authored-by: l0ng-ai <24760907+l0ng-ai@users.noreply.github.com> |