Matthew Meszaros 1387541bf0 feat: make self-hosted auth work without a mail relay by rewriting the platform SMTP transport with real AUTH and TLS (it did neither, so SMTP_USERNAME/SMTP_PASSWORD were dead and every documented relay was unreachable), adding MAIL_TRANSPORT=smtp|log|ses with a log transport that prints codes so a fresh install can sign in with no relay, demoting the emailed login code to AUTH_LOGIN_CODE=always|new_device|off (off on self-host, per NIST SP 800-63B and OWASP ASVS), claiming the first owner through a single-use setup link or WARMBLY_BOOTSTRAP_* instead of register-then-psql, deriving every emailed URL from APP_URL rather than a hardcoded app.warmbly.com that leaked live reset tokens to the vendor, fixing the confirm hooks that read path params against paramless routes and broke login, register and reset confirmation in the dashboard everywhere, adding generic OIDC with PKCE, one-time state, verified nonce and (issuer,subject) identity binding, enforcing 2FA on the social paths that skipped it, adding a per-IP limiter and trusted-proxy handling to the unthrottled auth group, refusing boot on the published default secrets, and dropping mailpit from the default stack

2026-08-14 10:37:14 +02:00

..

auth.go

New Repository: Add Backend Code

2026-01-17 14:11:14 +00:00

config_api.go

feat: bound auth login network waits

2026-06-01 16:56:24 +02:00

config_auth.go

feat: make google, apple and turnstile optional at boot

2026-07-20 09:56:17 +02:00

config_authpolicy.go

feat: make self-hosted auth work without a mail relay by rewriting the platform SMTP transport with real AUTH and TLS (it did neither, so SMTP_USERNAME/SMTP_PASSWORD were dead and every documented relay was unreachable), adding MAIL_TRANSPORT=smtp|log|ses with a log transport that prints codes so a fresh install can sign in with no relay, demoting the emailed login code to AUTH_LOGIN_CODE=always|new_device|off (off on self-host, per NIST SP 800-63B and OWASP ASVS), claiming the first owner through a single-use setup link or WARMBLY_BOOTSTRAP_* instead of register-then-psql, deriving every emailed URL from APP_URL rather than a hardcoded app.warmbly.com that leaked live reset tokens to the vendor, fixing the confirm hooks that read path params against paramless routes and broke login, register and reset confirmation in the dashboard everywhere, adding generic OIDC with PKCE, one-time state, verified nonce and (issuer,subject) identity binding, enforcing 2FA on the social paths that skipped it, adding a per-IP limiter and trusted-proxy handling to the unthrottled auth group, refusing boot on the published default secrets, and dropping mailpit from the default stack

2026-08-14 10:37:14 +02:00

config_databases.go

chore: remove the dead astra/cassandra code and deps

2026-07-20 09:56:01 +02:00

config_email.go

Config & Deploy

2026-01-29 08:50:38 +01:00

config_google.go

Config & Deploy

2026-01-29 08:50:38 +01:00

config_kafka.go

refactor: route worker events and tracking through the event bus

2026-07-20 09:56:16 +02:00

config_log.go

Config & Deploy

2026-01-29 08:50:38 +01:00

config_smtp.go

feat: make self-hosted auth work without a mail relay by rewriting the platform SMTP transport with real AUTH and TLS (it did neither, so SMTP_USERNAME/SMTP_PASSWORD were dead and every documented relay was unreachable), adding MAIL_TRANSPORT=smtp|log|ses with a log transport that prints codes so a fresh install can sign in with no relay, demoting the emailed login code to AUTH_LOGIN_CODE=always|new_device|off (off on self-host, per NIST SP 800-63B and OWASP ASVS), claiming the first owner through a single-use setup link or WARMBLY_BOOTSTRAP_* instead of register-then-psql, deriving every emailed URL from APP_URL rather than a hardcoded app.warmbly.com that leaked live reset tokens to the vendor, fixing the confirm hooks that read path params against paramless routes and broke login, register and reset confirmation in the dashboard everywhere, adding generic OIDC with PKCE, one-time state, verified nonce and (issuer,subject) identity binding, enforcing 2FA on the social paths that skipped it, adding a per-IP limiter and trusted-proxy handling to the unthrottled auth group, refusing boot on the published default secrets, and dropping mailpit from the default stack

2026-08-14 10:37:14 +02:00

config_stripe.go

feat: AI credit economy with monthly plan grants, non-expiring purchased top-ups, and Stripe billing - two-pool credit_ledger (monthly allowance reset each cycle on invoice.paid, purchased pool via checkout mode=payment fulfilled webhook-only), consume drains monthly-then-purchased, 3 fixed top-up packs, /subscription/credits balance+checkout+paginated transactions gated on manage_billing, one-time trial grant, billing credits card with balance ring and pack buttons, credit_purchase/credit_grant audit entities and spine, wired plan.monthly_credits through pg_plan reads/writes, retry-safe webhook idempotency, and an AI credits guide

2026-07-13 17:40:20 +02:00

config_tasks.go

Add sample auth UI theme

2026-02-10 19:30:47 +01:00

config.go

feat: add config.GetBoolPtr returning nil when an optional boolean env is unset, so a caller can fall back to its own default

2026-07-16 06:14:19 +02:00

constants.go

feat: make the inbound mail pipeline work end to end by never publishing the eventbus partition key as Nats-Msg-Id (JetStream deduped every event after the first per mailbox), fetching IMAP message bodies after the outer FETCH closes instead of nesting one inside it (which deadlocked sync on the first message), wrapping NEW_EMAIL in JobEventNewEmail across all three providers so the consumer stops nil-derefing, coalescing nil arrays before the NOT NULL unibox columns, sealing validation credentials on a copy so stored SMTP/IMAP passwords are not double encrypted, routing the email task type to the user email handler, and returning false instead of closing a nil conn in VerifySMTP (#88)

2026-07-31 09:41:36 +02:00

endpoint_storage.go

New Repository: Add Backend Code

2026-01-17 14:11:14 +00:00

endpoints.go

feat: make self-hosted auth work without a mail relay by rewriting the platform SMTP transport with real AUTH and TLS (it did neither, so SMTP_USERNAME/SMTP_PASSWORD were dead and every documented relay was unreachable), adding MAIL_TRANSPORT=smtp|log|ses with a log transport that prints codes so a fresh install can sign in with no relay, demoting the emailed login code to AUTH_LOGIN_CODE=always|new_device|off (off on self-host, per NIST SP 800-63B and OWASP ASVS), claiming the first owner through a single-use setup link or WARMBLY_BOOTSTRAP_* instead of register-then-psql, deriving every emailed URL from APP_URL rather than a hardcoded app.warmbly.com that leaked live reset tokens to the vendor, fixing the confirm hooks that read path params against paramless routes and broke login, register and reset confirmation in the dashboard everywhere, adding generic OIDC with PKCE, one-time state, verified nonce and (issuer,subject) identity binding, enforcing 2FA on the social paths that skipped it, adding a per-IP limiter and trusted-proxy handling to the unthrottled auth group, refusing boot on the published default secrets, and dropping mailpit from the default stack

2026-08-14 10:37:14 +02:00

inbox.go

feat: route the outlook provider through Microsoft Graph in the wmail worker with nil-guarded send/sync/new-email dispatch and a delta-cursor event, request delegated Graph OAuth scopes instead of the legacy IMAP/SMTP scopes, and always sync Outlook mailboxes

2026-07-04 08:07:49 +02:00

oauth2.go

New Repository: Add Backend Code

2026-01-17 14:11:14 +00:00

providers.go

feat: make self-hosted auth work without a mail relay by rewriting the platform SMTP transport with real AUTH and TLS (it did neither, so SMTP_USERNAME/SMTP_PASSWORD were dead and every documented relay was unreachable), adding MAIL_TRANSPORT=smtp|log|ses with a log transport that prints codes so a fresh install can sign in with no relay, demoting the emailed login code to AUTH_LOGIN_CODE=always|new_device|off (off on self-host, per NIST SP 800-63B and OWASP ASVS), claiming the first owner through a single-use setup link or WARMBLY_BOOTSTRAP_* instead of register-then-psql, deriving every emailed URL from APP_URL rather than a hardcoded app.warmbly.com that leaked live reset tokens to the vendor, fixing the confirm hooks that read path params against paramless routes and broke login, register and reset confirmation in the dashboard everywhere, adding generic OIDC with PKCE, one-time state, verified nonce and (issuer,subject) identity binding, enforcing 2FA on the social paths that skipped it, adding a per-IP limiter and trusted-proxy handling to the unthrottled auth group, refusing boot on the published default secrets, and dropping mailpit from the default stack

2026-08-14 10:37:14 +02:00