A PatchObject key is a JSON Pointer (RFC 8620 section 5.3), so a slash
inside the member name it points at has to be escaped as `~1`. Keyword
patches were built as `keywords/${keyword}` verbatim, which is fine for
every flat keyword but wrong for a nested tag: `$label:work/clients`
became the pointer `keywords/$label:work/clients`, asking for the
`clients` member of the `$label:work` keyword rather than for the keyword
itself. The patch is not a boolean at that path, so the server rejects or
ignores it and the tag never lands.
Route the keyword patch sites - setKeyword, removeKeyword, migrateKeyword
and the category-tab batch patch - through `keywordPointer`, which escapes
per RFC 6901 the way the calendar store already does for participant ids.
Flat keywords are untouched, so `$seen`/`$flagged` and friends keep the
exact pointers they had. The dev JMAP mock reads the escaping back, or
nested tags would behave differently against the mock than against a real
server.
migrateKeyword also took any answer as success: a method-level error on
the query read as "no message carries this keyword", one on the write was
ignored outright, and a per-message refusal was invisible - so a rename
that moved nothing still reported a clean migration. It now answers with
{ migrated, refused }, because the work is batched and a failure partway
through cannot undo the batches already applied. A whole batch the server
refuses stops the rest, which it would refuse too; a single message it
refuses does not, the mail behind it being unaffected. A query error
throws, nothing having been written yet, and so does a run that migrated
nothing at all - the case where the caller must not rename a tag over
messages that all kept the old keyword.
The walk over tagged mail was not paginating safely either. It stopped at
the first page shorter than the limit it asked for, but RFC 8620 section
5.5 lets a server clamp that limit, so a clamping server left most of the
mail unmigrated. Positions are also only comparable within one queryState,
which the walk ignored: mail arriving mid-walk shifts every later page. It
now restarts when the state changes under it, and gives up - before any
write, so the caller can simply repeat - once a mailbox has moved under it
three times, rather than mixing ids from states that no longer agree. A
page carrying no id it has not already seen ends the walk, which keeps it
bounded against a server that answers every position with the same page.
Review follow-up on the shared-folder mutation routing.
The owner lookup replaced the resolved client with any connected client whose
JMAP account id matched. Account ids are opaque per-server values, and personal
mailboxes carry an accountId too, so this ran on every folder mutation and could
hand a mutation to a client of a different server that happens to issue the same
id - where the bare mailbox id may exist and belong to someone else. Keep the
resolved client when it already is the owner, and require a candidate to match
the server URL as well as the account id.
Recover the owner account and the bare mailbox id from the namespaced store id
when no mailbox object is available. Previously the raw `accountId:id` went to
the server as a mailbox id with the owner dropped, so the mutation targeted the
active personal account; in setMailboxRole that cleared the personal role before
failing.
Drop the shared account header context menu when the account carries no usable
id. buildMailboxTree groups shared mailboxes without an accountId under the
placeholder "unknown", which cannot be a mutation target.
The "This event only" edit path built nested JMAP patch pointers
(recurrenceOverrides/<recurrenceId>/<field>). On the first edit of an
occurrence the override object doesn't exist yet, and JMAP pointers can't
create a missing intermediate object, so Stalwart returned notUpdated and
the edit failed with two error toasts.
Build the override as a single pointer recurrenceOverrides/<recurrenceId>
whose value is the occurrence's field set (dropping identity/series keys),
mirroring the working "delete this occurrence" path. Extracted as the pure,
tested helper buildRecurrenceOverridePatch.
Closes#774.
A calendar holding only tasks (VTODO, e.g. from tasks.org) appeared in the
event calendar UI as an empty calendar. Stalwart's Calendar/get exposes no
supported-component set, so tasks-only-ness is derived from the calendar's
objects (mirroring the existing event/task split): a calendar is tasks-only
iff it holds >=1 object and every object is a task.
- getTasksOnlyCalendarIds scans an account's objects (CalendarEvent/query +
minimal /get), early-exits once every calendar has an event, only marks
after a full scan, and fails open on the cap or any error.
- getAllCalendars/getCalendars annotate calendars with isTasksOnly.
- Such calendars stay in the store for the tasks view (task picker, task-list
grouping) but are filtered from the event sidebar and default selection.
Verified against Stalwart v0.16.16: the tasks-only calendar is flagged, the
default (with an event) is not.
Closes#761.
The Files store was the only account-scoped store never wired into the
account lifecycle: account-state-manager clears email/contacts/calendar/
filter/identity/vacation on a switch, but not files. Because the Files
store is a global that outlives the FilesApp component, the previous
account's client + resources lingered in memory and resurfaced whenever
the drive was reopened after a switch - most visibly when the switch
happened on the mail view (FilesApp unmounted), the common normal-shell
flow that the FilesApp re-init effect alone does not cover.
Clear the Files store centrally in clearAllStores() alongside the other
account-scoped stores, so the reset happens on every switch path.
Tests:
- lib/__tests__/account-state-manager.test.ts: assert clearAllStores()
resets the Files drive (client, resources, pathStack, selection,
supportsFiles) with no cross-account leak.
- integration/tests/13-files-account-switch.spec.ts (dockerized Stalwart,
JMAP FileNode): seeds a distinct top-level folder in alice's and bob's
drives and asserts the on-screen drive swaps on a switch with no stale
folder - both switching off the Files view (mail -> switch -> open
Files) and on it (rail account switcher). Verified: passes with the fix,
fails (path 1) without it. New FileNode seeding helpers in helpers/jmap.ts;
openFiles/openMailView/driveEntry nav helpers in helpers/app.ts.
Editing an event's start now shifts the end by the same amount, preserving the
current duration (end - start). Moving the start forward never leaves the end
before it, and moving it either way never silently changes the length. Guards
against an already-negative-duration state.
Extracted a pure `shiftedEnd(oldStart, oldEnd, newStart)` for the start
date/time onChange handlers. +7 unit tests. tsc + eslint clean.
The client-side IntlProvider keeps its own build-time message map next
to the ones in i18n/routing.ts and i18n/request.ts, and ca and mn never
made it in. Picking either language merged an empty object over the
English base, so the UI stayed English no matter what the picker said
(#756); the server request config and routing both knew the locales,
the client map was the only gap. Register both and pin the map to the
routing list with a test so a locale cannot ship half-wired again.
When the server refuses the draft save, the composer resets its explicit-
close flag so the unmount stash hands the text to the continue-draft slot
(#702). The close follow-up must be dropped in that case - running it
would open the new session on top of the rescue. This was the one branch
of the close guard without a test.
Opening a mailto: link while the composer held unsaved text used to
replace the session outright and drop the text on the floor. The mailto
entry point now hands a follow-up to the composer's dirty-aware close
handler, so the "Save or discard draft?" dialog runs first: save and
discard continue into the mailto draft, cancel leaves the current draft
untouched. When a failed save hands the text back to the continue-draft
slot (#702), that rescue wins and the follow-up is dropped.
Composing a new message while a shared/group folder was selected started
it as the reaching login's primary address instead of the shared one,
even when a matching send-as identity existed.
`composeFromAccountEmail` was resolved from
`getAccountById(viewingAccountId ?? activeAccountId)`. A delegated
mailbox has no separate login and no AccountEntry, and
`setViewingAccount` is only ever called with `null`, so selecting a
shared folder leaves both ids pointing at the primary account:
`findComposeIdentityId` was handed the wrong address and correctly
matched the primary identity.
Resolve the address from the selected mailbox instead, falling back to
the account lookup for own folders. `accountName` is the JMAP
`Account.name`, which RFC 8620 describes as "e.g., the email address of
the account"; a server that puts a human label there produces no
identity match and the composer keeps the primary identity, which is the
previous behaviour. Replies are unaffected - `composeFromAccountEmail`
is only read when `mode === 'compose'`.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Tags, pins and $answered/$forwarded/$mdnsent set on a message in a
shared/group mailbox opened directly from the "Shared" sidebar section
did not persist: they showed until the next reload and were then gone.
The call sites resolved the target account as
`isUnifiedView ? email.sourceAccountId : undefined`. Outside the unified
view that is always `undefined`, so the write went to the reaching
client's own account, which the server answers with `notUpdated` /
`updated: null` and no error - the same silent no-op that
`email-store-shared-folder-actions.test.ts` already covers for the batch
actions. Emails fetched from a shared folder this way are undecorated
(no `sourceAccountId`); the owner is only recoverable from the selected
mailbox.
`toggleStar` never had the bug because it routes through
`resolveEmailActionContext`, which resolves the owner from the email's
source in an aggregate view and from the selected mailbox otherwise.
That resolver was reimplemented inline at each keyword call site, and
the inline copies only ever covered the aggregate half - so starring a
shared message persisted while tagging the same message did not.
Move the two keyword writes into store actions built on that resolver
and route every call site through them, including the read-receipt and
Pro-compose paths that previously passed no accountId at all.
The store actions resolve only for an email the store actually knows.
A Pro tab fetches its own email and never enters `emails` or
`selectedEmail`; for those the selected mailbox says nothing about the
message's owner, so guessing from it would send an own-account write to
a shared account whenever a shared folder happened to be open. An
unknown email keeps the previous behaviour instead.
Behaviour on own-account and unified-view messages is unchanged.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
next-intl has no "../" relative-namespace escape. A key like
t('../context_menu.not_spam') is not resolved relative to anything -
it is concatenated literally into the lookup key and always misses,
throwing MISSING_MESSAGE. email-list.tsx, about-data-settings.tsx,
and account-settings.tsx all used this pattern to reach keys outside
their own translation namespace.
Fixed by calling useTranslations() again for each additional
namespace needed, which is the supported way to reach sibling
namespaces, instead of trying to walk out of the current one.
The translations test already verifies that every key referenced in
source resolves in the en locale, but its extractor skipped any key
starting with a dot, which is exactly the shape of the broken calls,
so this class of bug never failed CI. Since no legitimate key can
start with a dot, the exclusion is removed. With it gone the test
reports all thirteen call sites fixed here when run against the old
code, and passes with the fix, so a reintroduced relative path fails
CI with the offending file listed.