Once a search runs the header field shows the active query, but the only
way back to the full list was to open the panel and clear it there.
Put a clear button at the trailing end of the field, shown only while a
query is applied. The field is now a container rather than one button,
since nesting a button inside a button is invalid markup — the label
area and the clear control are siblings.
Phones stacked two 56px bars: the mailbox title, then a row holding
select-all, the search box, the filter toggle and refresh. That is 112px
of chrome before the first message, and the title merely repeats what
the drawer already shows.
The header now carries the account avatar and a tappable search field,
and the second row is presented full-screen when that field is tapped —
so the same SearchBox, suggestions, history and filter chips appear,
none of it rebuilt. Select-all and refresh remain in that panel, and the
list already supports long-press selection and pull-to-refresh.
Tablet and desktop are unchanged; the row is only relocated on phones.
The rail variant flies its popover out sideways, which is right for a
narrow vertical sidebar but wrong at the top of the screen: anchored to
a trigger at the inline-end edge it runs straight off the viewport. In
RTL that edge is the left one, so the menu opened past the left border
and was unreachable.
Add a "header" variant that drops the menu below the trigger and pins it
by its trailing edge, with a max-width so it can never exceed the
viewport. rail and expanded are untouched.
A delayed send composed from a shared/group identity is created in the
*shared* JMAP account, because sendEmail() passes the target account to
getSubmissionAccountId(). Every read/write on the scheduled surface,
however, asked the primary submission account only:
getScheduledEmails / cancelEmailSubmission / rescheduleEmailSubmission
-> getSubmissionAccountId() // no argument = primary account
So a message scheduled from a shared address is accepted and stays
pending on the server — it *will* be delivered at sendAt — while the UI
cannot list it, cancel it or reschedule it. Cancelling appears to work:
EmailSubmission/set against the primary account answers `notFound` in
notUpdated, which the client never surfaced, and the mail goes out
anyway. Silent unrecallable mail is worse than a failed send.
Stalwart advertises urn:ietf:params:jmap:submission (with FUTURERELEASE
and a non-zero maxDelayedSend) on group accounts as well as personal
ones, so scheduling from a shared address is legitimate.
Data layer:
- getSubmissionAccountIds() enumerates every submission-capable account;
getScheduledEmails() queries each, tags every result with the account
that owns it, and fetches each submission's Email from that same
account (it lives beside the submission, not in the primary account).
It also returns per-account totals computed over all pending
submissions, so a badge stays correct past the first page.
- resolveSubmissionAccountId() locates a submission's owning account so
cancel/reschedule (and the sendAt/envelope helpers) act on the right
one. Callers that know the account pass it and skip the lookup.
- sendEmail() reports the submission's account in SendEmailResult, and
the pending-undo record carries it, so the "Undo send" / "Send now"
toast actions — which know only a submission id — address the right
account directly rather than searching for it inside the undo window.
- The delayed-send gate considers any reachable submission account
rather than only the primary one.
UI:
- Each shared account gets its own "Scheduled" sidebar row, scoped to
that account; the own row keeps showing the combined view. The scope
travels beside the virtual mailbox id, so the store's single
__scheduled__ id is unchanged, and it also drives which row renders as
selected and whether the scoped list has more to load.
Tested against a real Stalwart (integration/tests/11-shared-scheduled-send):
two server-truth tests pin the mechanism (the submission is invisible to
the primary account, and cancelling through it is a silent no-op) and two
UI tests cover the fix. All three UI-level assertions — the combined
list, the scoped row, and which row is selected — fail without this
change.
Review follow-up on the shared-folder mutation routing.
The owner lookup replaced the resolved client with any connected client whose
JMAP account id matched. Account ids are opaque per-server values, and personal
mailboxes carry an accountId too, so this ran on every folder mutation and could
hand a mutation to a client of a different server that happens to issue the same
id - where the bare mailbox id may exist and belong to someone else. Keep the
resolved client when it already is the owner, and require a candidate to match
the server URL as well as the account id.
Recover the owner account and the bare mailbox id from the namespaced store id
when no mailbox object is available. Previously the raw `accountId:id` went to
the server as a mailbox id with the owner dropped, so the mutation targeted the
active personal account; in setMailboxRole that cleared the personal role before
failing.
Drop the shared account header context menu when the account carries no usable
id. buildMailboxTree groups shared mailboxes without an accountId under the
placeholder "unknown", which cannot be a mutation target.
Folder management performed on a shared/group account was sent to the
logged-in user's primary JMAP account instead of the mailbox owner's
account. Subfolder creation therefore failed with invalidProperties for
parentId, root folders could be created silently in the personal account,
and rename, delete, role, and reorder targeted the wrong mailbox tree.
Shared mailboxes use namespaced store ids to avoid cross-account
collisions, while Mailbox/set requires the owner's accountId and the bare
server mailbox id. Resolve that mutation context centrally: recover the
mailbox originalId and owner account, use a directly connected owner
client when one exists, otherwise reach delegated/group accounts through
the active client with an explicit accountId.
Thread the account target through create, update, and delete JMAP methods
and all folder-management actions. Scope role replacement to the same
owner account, and expose explicit root-folder creation from shared
account headers without making personal root creation depend on the
currently selected folder.
Add unit coverage for JMAP request scoping, shared store routing, role
isolation, direct-client handling, and reorder. Add a Stalwart integration
scenario that creates root and nested group folders, renames them, and
deletes them through the UI.
If you have a large number of tags, getTagCounts would not be able to get the
unread counts because it did not respect maxCallsInRequest, even though the
value was actually read out, it was just ignored. There are also other places
where the limits were not respected.
Batching is now generalized in a helper that also takes maxObjectsInSet, which
also was ignored, into account and is applied to all functions.
In addition, the dev mock now also advertises and enforces the limits, so these
issues can get picked up during development.
Possible closes#699
Possibly closes#399
Nested tag toasts from drag-and-drop only showed the leaf name for
non-root tags, contradicting the comment above it and making two
same-named leaves under different parents (e.g. Personal/Receipts vs
Work/Receipts) indistinguishable in the toast.
The context menu's markAsRead handler was the one action left reading
the stale contextMenu.data instead of the live-refreshed
contextMenuEmail introduced alongside it, so it could act on outdated
email state while every sibling handler was already updated.
Previously tags where very much focused on color coding email and less about
adding additional information. They were also visualized in different ways in
different locations.
This commit gets rid of all "Color-coding" references, aligns visualization of
the tags across the whole project and tries to improve user experience of using
tags in general.
A search box is shown in the tagging control so the user can quickly search for
a tag if they have a huge (more than 10) amount of tags.
- levels are joined by forward slashes in the keywords
- behaviour is opt-in for now
- long paths are shortened if there is not enough display room
Closes#687.
These popovers are portaled and positioned via inline styles computed
from getBoundingClientRect() rather than Tailwind classes, so the
logical start-0/end-0 fix doesn't reach them. They always anchored to
the physical right of their trigger (rect.right + 8), which in RTL
pushes them further into the edge the trigger is already flush against
instead of toward the visible content area.
Added isDocumentRTL() to i18n/direction.ts and used it to mirror the
computed position in:
- navigation-rail.tsx: storage quota popover, logout/switch-account menu
- account-switcher.tsx: both the rail and expanded-sidebar variants
- calendar-invitation-banner.tsx: the "add to calendar" picker
The switcher only offered 'sign out of active' and 'sign out of all' — no
way to drop a single non-active account (e.g. one stuck in an error state you
can't switch into to sign out). Add a hover × on non-active, non-default rows
and a removeAccount(id) auth action that tears down the client, drops it from
the registry, and clears its per-slot session/token cookies.
Stacks on the switcher redesign in #517.
Extend the integration suite (now 22 tests) to cover:
- All Mail view (04): single-account merge of Inbox + custom folders with
Junk excluded, and cross-account aggregation across every logged-in account.
- Message actions from the list context menu (05): mark read/unread, delete
(→ Trash), mark-as-spam (→ Junk) and not-spam round-trip, verified on both
the UI counters/row state and the server mailbox the message ends up in.
- Shared/delegated folders (06): a delegated folder (+ Trash/Junk) shared
alice→carol; the shared folder renders with its counter, and read/unread/
delete/spam performed there land correctly (server-verified).
Hooks added: data-testid on context-menu delete/spam/read-unread items
(via a testId prop on ContextMenuItem), data-shared on folder rows, and
testId/data-expanded on sidebar section headers to drive the Shared section.
Observations surfaced by the suite (asserted server-side / with a reconcile):
- mark-as-spam doesn't optimistically decrement the *source* counter the way
delete does; a visibility reconcile settles it.
- shared *destination* counters (shared Trash/Junk) don't refresh live —
forceSync reconciles the active account only, not shared accounts.
Add an end-to-end integration harness that runs the webmail against a real
Stalwart mail server in Docker and drives it with Playwright, focused on the
mail/folder synchronisation behaviour (unread/total counters, folder-list
sync, account-scoped Unified Mailbox) that the unified-mailbox work touches.
- integration/ stack: Stalwart (declarative bootstrap: alice/bob/carol,
submission + IMAP listeners, permissive CORS) + webmail (dev mode, so the
browser's plaintext cross-origin JMAP calls aren't blocked by the prod CSP).
- Helpers: dependency-free SMTP submit client, JMAP client for seeding /
inspecting server state, and page helpers (login, add/switch account,
locale-independent folder-counter reads).
- Specs: login, single-account sync (receive/read/move/delete/folder-create/
burst) and multi-account (per-account isolation + cross-account Unified
Inbox aggregation + background-account delivery). 12 tests, all green.
- Add focused data-testid hooks to the mail UI (folder rows + counters, email
list items, account switcher, composer) for stable selectors.
- Exclude examples/ and integration/ from tsconfig/eslint/.dockerignore.
Rework the sidebar "All accounts" section into a "Unified Mailbox" that, by
default, stays within the active login account and its shared/group folders.
Merging across multiple logged-in accounts becomes an opt-in sub-option instead
of the default, and the standalone per-account "All Mail" virtual folder is
folded into the unified All mail / Unread / Starred entries (its folder selection
now narrows those lists).
Scope:
- lib/unified-mailbox.ts: UnifiedAccountClient.crossIncludedMailboxIds; the cross
views honor the per-account folder selection (union across accounts = the sum
of each account's selection), falling back to inbox+custom when unset.
- stores/email-store.ts: buildUnifiedAccountClients gains scopeToClientAccountId
(the account boundary) and populates crossIncludedMailboxIds from
allMailFolderIds; remove the standalone __all_mail__ fetch/search/load-more
branches.
- page.tsx: scope to the active account unless cross-account is active (per-user
opt-in AND admin gate); the per-role unified mailboxes obey the same scope.
Folding:
- Drop ALL_MAIL_MAILBOX_ID (lib/jmap/types.ts); thread-list source-folder column
now keys on isUnifiedView only; settings folder picker moves under the unified
group and shows once any unified entry is enabled.
Config:
- User: new unifiedCrossAccount (default false); includeGroupInUnified default
flips to true; enableAllMailView retired; the three cross-view toggles now gate
the unified Unread/Starred/All mail entries.
- Admin: new unifiedCrossAccountEnabled gate, default FALSE (cross-account is an
admin opt-in; when off the per-user toggle is hidden and the scope is forced
account-bounded at runtime). allMailViewEnabled deprecated and normalized
forward into crossAllViewEnabled on policy load; cross-view gate labels reworded
to "Unified Mailbox: ...".
Header: the sidebar section shows "All accounts" when cross-account is active
(opt-in AND admin gate AND >1 connected account), else "Unified Mailbox".
Migration:
- Settings persist v5 -> v6 (exported migrateSettings) - cross-active users keep
cross-account; All-Mail-only users get the account-bounded unified All mail
entry with folder ids preserved; includeGroupInUnified enabled for every
migrated config; fresh installs are account-bounded.
- Admin policy: one-shot, marker-guarded migratePolicyUnifiedMailbox (run before
configManager.load) enables unifiedCrossAccountEnabled when a cross view was
active, so existing cross-account installs keep the behaviour despite the
default-false gate. Skipped on read-only config dirs.
Locales: sidebar all_accounts (original label) + unified_mailbox (translated, per
locale) keys; dead standalone all_mail strings removed across all 20 locales.
Docs: FEATURES.md updated to the account-bounded model, the cross-account gate,
and the folder-narrowed aggregate entries.
Verification: tsc clean, eslint clean, full vitest suite green (incl. translations
completeness, cross-view/migration coverage, and the admin policy migration test).
The account switcher now always renders the default (starred) account first
and lets you drag the remaining accounts into any order. Default stays
pinned; only non-default rows are draggable (shown via a grip handle on
hover). Wraps each row in a draggable container and persists the new order
through the existing reorderAccounts store action.
Ordering logic extracted to pure helpers (sortDefaultFirst,
reorderNonDefaultIds) in account-utils with unit tests.
The sidebar registers a global window keydown listener that expands/collapses the selected mailbox's subfolders on ArrowLeft/ArrowRight. It didn't check where focus was, so pressing Left/Right while typing in a new email (the contentEditable composer, the subject field, search, etc.) toggled the inbox's subfolders open/closed.
Bail out of the handler when the event target is an editable element (INPUT/TEXTAREA/SELECT/contentEditable). Folder-tree arrow navigation still works when focus isn't in an input.
Add cross-account aggregate mail views and make group/shared (delegated)
accounts first-class in every aggregate view. (The unified mailbox, the "All
Mail" view, and "include group inboxes" already exist on main; this branch adds
the cross-account views and the shared-account correctness work.)
New views (admin-gated + per-user toggle, nested under Unified Mailbox):
- Cross-account "All accounts": All unread / All starred / All mail across every
connected account, including shared/group folders. Each list labels the source
folder of every message.
Source reference on aggregated emails (the core of the shared-account work):
- Replace the overloaded `accountId` with two explicit, always-set fields:
`sourceClientAccountId` (the login the mail is reachable through) and
`sourceAccountId` (the owning JMAP account). `accountId` stays display-only.
- Resolution is branch-free everywhere: pick the client by sourceClientAccountId,
pass sourceAccountId as the JMAP accountId (no-op for personal), read the
owner's mailbox list cached by JMAP id. No capability scan.
Shared/group-account correctness across all aggregate views:
- Route open (click + auto-fetch), thread/conversation open + reply-refresh,
mark read, star, move, delete (account-scoped trash), archive (owner-routed
createMailbox / fetchAccountMailboxes), and spam + undo via the source ref.
- Add accountId params to toggleStar / batchMarkAsRead / batchDeleteEmails /
createMailbox where missing.
- Fix local unread/total counter math for shared folders via emailInMailbox()
(matches namespaced shared ids and bare own ids).
- Keep the unified/cross virtual selection on background mailbox refresh (no
jump back to inbox after deleting in All Drafts/Junk).
Junk UX:
- In "All Junk" the spam action becomes "not spam" in the viewer, context menu,
and list hover icons; undo routes shared mail back to its own inbox.
Admin:
- Policy gates crossUnread/Starred/AllViewEnabled, each noting the matching
per-user toggle (allMailViewEnabled clarified too).
i18n / docs / tests:
- locales (19): cross-view labels + descriptions and hover not_spam, translated
in all shipped languages.
- FEATURES.md + README.md document the new views and group-account support.
- Tests for shared-account routing (single + batch + undoSpam), decoration, and
unified-selection preservation.
Cleans up the lint warnings the pre-commit hook surfaces, without any
behavioral change:
- Remove unused imports/vars/destructured props (parseISO, useEffect,
format, durMin, roles, daysInYear, ALLOWED_PLUGIN_FILES, continuesBefore,
isPushConnected, isSelected) and the now-unused parseDuration import.
- Drop three stale `// eslint-disable-next-line no-undef` directives that
no longer suppress anything (browser-navigation, smime/crypto-engine).
- recurrence-expansion.test.ts: replace 39 `as any` casts with a cast-only
`rule()` helper for partial recurrence-rule fixtures, typed access to
utcStart/utcEnd (now on CalendarEvent), and the source's
`Partial<CalendarEvent> & { excluded?: boolean }` for the excluded
override. No defaults are injected, so the expansion logic sees the same
partial rules as before (35 tests still green).
Remaining: 7 react-hooks/exhaustive-deps warnings are left as-is — adding
the missing deps changes effect/memo timing and needs per-hook review, not
a mechanical fix. tsc --noEmit clean; eslint 0 errors / 7 warnings.
The folder and tag section gears in the sidebar deep-linked into Settings by writing the persisted `settings-active-tab` localStorage key, so the chosen section became the permanent default the main Settings button opened on - indefinitely.
Compounding it, the desktop Settings tab list called setActiveTab directly without persisting, so normal navigation never updated the default and the hijacked value could never self-correct.
Fix: section gears now write a one-shot sessionStorage key that is consumed on mount (transient deep-link, no persistence); desktop tab clicks go through handleTabSelect like the mobile list, so the last-used tab is saved consistently. Stale/removed tab IDs are still caught by the existing effectiveActiveTab fallback.
Linus Rath
Linus Rath
Shuki Vaknin
Patrick Rotter
KazNIISA IT
Lucas Gaitzsch
Mathy Vanvoorden
xhzeem
Stefan Hildebrandt
dealerweb
Maarten