`formatRecipient` writes a quote inside a display name as `\"`, but
the parsers that read recipient strings back took every `"` as the end
of the quoted name. A sender named `Support", ceo@corp.example, "x`
came back from the draft stash (or the dirty check) as three
recipients, one of them an address the user never chose. The
splitter and its helpers now skip escaped characters inside quotes.
Review follow-ups on the unclosed-angle split:
- The paste path fell back to splitMailbox for every entry, which keeps the
last angle run only and folds everything ahead of it into a display name.
`Ann <a@x.com Bob <b@y.com` became one chip and a@x.com disappeared without
even landing in `invalid`. Take that path only when the prefix is not an
address itself.
- The new separator branch ignored `inGroup`, so an unclosed `<` inside RFC
5322 group syntax shattered the group its sibling branch keeps intact.
- angleRunCloses now scans quote-aware, so a `>` inside a quoted display name
no longer counts as closing the run, and it starts past `from` so the helper
is correct whether it gets the separator or the opening `<`.
A `<` with no matching `>` latched splitRecipients into "inside an
address" for the rest of the string, so every later separator was kept
literal and the whole list collapsed into a single entry. Pasting
Ap Reinders <ap@x.com, Erwin Beets <erwin@x.com, jaco@x.com
therefore dropped ap@ and erwin@ into `invalid` and kept only jaco@.
The text left behind in the input can then be committed as one chip
whose address is the entire list, which reaches the server as a single
malformed mailbox and gets the message rejected at DATA:
550 (0.0.0) 'Invalid To email address'
Treat a separator as a separator when the open angle run cannot close
before the next one opens, and fall back to splitMailbox so a
`Name <email` entry keeps its display name instead of falling apart
into bare words.
Typing a contact group's name in a recipient field suggested the
individual members, and "send email to group" on the contacts page
filled the field with one chip per member - the group itself never
appeared anywhere.
The autocomplete now offers the group as a single entry (group icon
plus member count), and selecting it - like the contacts-page action -
inserts one chip named after the group that carries a snapshot of its
members. The chip expands into the deduplicated member addresses when
the message is sent or saved as a draft, mirroring how Outlook handles
distribution lists. Expansion happens where the outgoing address lists
are built, so validation and every plugin hook see real addresses.
Group chips survive the composer's string boundaries (draft data, dirty
compare, the contacts-page hand-off) as RFC 5322 group syntax
("Team: a@x, b@y;"). A bare colon reliably opens a group there because
display names containing a colon are always quoted. Typed text only
parses as a group when it carries at least one valid member, so stray
"Subject: hello" input stays a plain recipient.
RecipientSuggestion gains an optional group field; plugins that ignore
it keep working unchanged.
Clicking Send while attachments were still uploading silently dropped
them from the outgoing message: every place that builds the outgoing
attachment list filters on att.blobId && !att.uploading, and the Send
button never accounted for uploads still in flight. Attach a few files,
hit Send right away, and the email could go out missing some of them
with no warning.
handleSend now detects pending uploads before validating:
- Send is disabled with an explanatory tooltip
(validation.attachments_uploading) while it waits.
- Once uploads finish cleanly, the send proceeds automatically - no
second click needed.
- If an upload FAILS while waiting, the send is aborted with an error
toast (validation.attachment_upload_failed) instead of silently
shipping the email without the failed attachment - the user may not
be looking at the composer to notice the red error chip.
- If the draft is closed or discarded while waiting, the pending send
is cancelled cleanly.
The wait/decision logic lives in waitForPendingUploads() in
lib/email-composer-utils.ts (returns completed | cancelled | failed)
with unit tests covering all three outcomes. Outgoing-attachment
call sites read the freshest state via attachmentsRef since the
render closure captured at click time won't reflect uploads that
finished during the wait.
Both new i18n keys added to all 20 locales under
email_composer.validation.
Pasting a list of addresses into To/Cc/Bcc now creates one chip per
address instead of dropping the whole blob in as a single invalid chip.
A paste is split only when it actually contains a separator; a lone
address falls through to normal editing.
- Separators: commas, semicolons, and any whitespace/newline - covers
comma/space dumps, spreadsheet columns and Outlook-style `;` lists.
- Display names are preserved: `Name <email>`, a fully-quoted
`"Name <email>"` entry, and `"Doe, John" <email>` (comma inside a
quoted name) each stay a single chip with the name intact.
- Bare-address runs split per address; a `<addr>` token is unwrapped;
tokens that aren't valid addresses are left behind in the input for
the user to fix rather than becoming junk chips.
- Deduped case-insensitively within the paste and against existing chips.
Implemented as splitPastedRecipients in email-composer-utils, layered on
the shared quote/angle-aware splitter: splitRecipients gains an optional
`separators` argument so the composer/mailto serialization boundary
(comma-only) and the paste path (`,;\n\r`) share one implementation.
Wired into the recipient chip input's onPaste handler (To/Cc/Bcc).
Alternative to the quote-aware string fix: represent committed To/Cc/Bcc
recipients as Recipient[] ({name?, email}) with a separate input-text
string per field, instead of a single comma-joined string parsed with
split(','). Structured recipients can never be torn apart on a delimiter,
so a display name containing a comma ("Doo, John <john@doo.org>", as
produced on Reply-All) stays a single chip.
- email-composer-utils: add Recipient type, parseRecipient/formatRecipient,
and parseRecipientList/formatRecipientList for the (de)serialization
boundary (ComposerDraftData stays a string; quoting keeps it lossless).
Remove the now-unused string-chip helpers.
- email-composer: to/cc/bcc are Recipient[]; toInput/ccInput/bccInput hold
the in-progress text. Reply/forward init, autocomplete, chip edit, drag &
drop (payload now carries the structured recipient), send/draft/validation
and template paths all operate on arrays. withInput() folds uncommitted
typed text into the send/validation set.
- Tests updated for the array contract; add comma-in-name chip coverage.
Adds native HTML5 drag-and-drop so users can move recipient email
address chips between the To, CC, and BCC fields in the composer.
Chips dragged onto the Cc/Bcc toggle buttons auto-reveal the hidden
field and place the chip there.
* Added account selection for protocol links when multiple connected accounts are available, including mailto: links
* Added support for handling mailto: links in an already-open PWA/session instead of always opening a new tab
* Added webcal: protocol handling for calendar links
* Added account selection for webcal: links when multiple calendar-capable accounts are connected
* Added an import-or-subscribe choice for detected webcal calendars
* Added protocol handler settings for registering mail and calendar handlers and choosing the open mode
* Added service worker/session coordination for passing protocol requests between browser/PWA contexts
* Added tests and translations for the new protocol handler flows
Linus Rath
Bram Buijs
Paulhenry Saux
dealerweb
KazNIISA IT
Stefan Hildebrandt
Lucas Gaitzsch