Several failures around scheduled and undoable sends said the wrong thing
or nothing at all:
- "Undo send failed" also appeared when the cancel went through and only
putting the message back in Drafts failed, suggesting the mail might
still go out. Now that case says the send was cancelled and the message
is still in Sent (or, for S/MIME, that its copy could not be removed);
a failed cancel keeps the old message.
- "Cancel and edit" had no error handling, so a failure ended as an
unhandled rejection. It now reports a failed cancel and a failed restore
the same way as undo.
- A failed "Send now" or reschedule at a full submission quota did not say
that the message is still scheduled. It now does, with its time.
- The reschedule retry after making room could send a message twice: the
prune and change-log walk take a while, and the original could go out
meanwhile. The original is read again first and nothing is resubmitted
unless it is still pending ("This message was already sent" otherwise),
and HOLDFOR is worked out again after the slow step.
- The List-Unsubscribe mailto path showed only a generic error at a full
quota; it now shows the quota explanation too.
- The Stalwart explanation of a full quota (Bulwark removed what it
could, an administrator has to raise the limit) was shown for any
server's `overQuota`. It now needs `urn:stalwart:jmap` on the
submission account; other servers get a generic sentence with their
own description.
- At a full quota every attempt, including each automatic read receipt,
ran the forced prune, the change-log walk and the gets again. When they
find nothing that can go, the account is left alone for five minutes.
Stalwart 1.0 puts `$hasattachment` or `$hasnoattachment` on every
message and derives `hasAttachment` from them alone. It also refuses
keywords over 128 bytes (0.16 cuts them to 128 characters) and more than
100 keywords on one message. The keyword writers ignored Email/set
`notUpdated`, so a refused tag showed until the next reload and then
vanished.
- `markAsRead`, `batchMarkAsRead`, `toggleStar`, `updateEmailKeywords`,
`setKeyword`, `removeKeyword` and `batchUpdateKeywords` check the
Email/set outcome, and the errors carry the JMAP type. Tagging from
the list or the viewer shows "Tagging failed"; a refused category-tab
move rejects the plugin's promise and skips the categorize hooks.
- Tag ids are capped at 121 characters (128 bytes with `$label:`).
- The attachment keywords are hidden in view source, the plugin
projection and the `getKeywords` fallback labels, reserved for
category tabs, and refused by the plugin keyword API. Email/copy and
the cross-server import still carry them over.
- A tag comes off by leaving its key out of the full keyword map instead
of being sent as false, which RFC 8621 does not allow;
`updateEmailKeywords` also drops the false entries local updates leave
behind (`$seen: false` after marking unread).
- The automatic mark-as-read no longer leaves an unhandled rejection
when the server refuses it.
Stalwart 1.0 counts every EmailSubmission record of an account against
`maxSubmissions` (500 by default), whatever its status or age, and its
own purge of old records never runs. Bulwark never destroyed a
submission, so after about 500 JMAP sends an account could not send at
all: every send, read receipt and reschedule failed with a raw "There
are too many email submissions" error, and each failed attempt left one
more copy of the message in Drafts.
Bulwark now removes the records that can no longer be cancelled.
Destroying a record never stops its delivery, but a pending one could
no longer be cancelled, so pending records are never touched:
- an immediate send (no hold, no undo window) destroys its own record
right after the send, riding along with the old-draft cleanup; only
where `urn:stalwart:jmap` is advertised, and never decided by the
created `undoStatus`, which 0.16.10-0.16.16 report as final for held
sends
- a throttled background prune destroys canceled records and final
records whose `sendAt` has passed, going by `EmailSubmission/get`, in
every submission account; it runs at startup, after sends, after
undo and on EmailSubmission state changes
- a confirmed cancel (undo, cancel, reschedule) destroys the canceled
record in a request of its own
- an `overQuota` on a submission create prunes at once, on Stalwart
walks the change log for records older than the query's three-day
window, retries once, and otherwise throws `SubmissionQuotaError`,
shown as a translated explanation in the composer, quick reply, read
receipts and the scheduled-send actions
Failed sends now clean up after themselves and say so:
- a failed send removes the Drafts copy it created and keeps the
user's draft; the raw send paths remove their import the same way
- a read receipt that did not go out is taken back out of Sent, a
method-level error counts as a failure, `$MDNSent` is only set after
a sent receipt, and the automatic receipt no longer retries on every
refresh of the open message
- quick-reply failures, "Send now", "Reschedule" and a failed undo are
shown instead of only logged
- the scheduled list reads every page of `EmailSubmission/query`; it
stopped after the first because `total` needs `calculateTotal`
JMAP thread ids are only unique within their account - Stalwart hands out
per-account counters such as "b" - so the cross-account views merged
unrelated conversations that happened to share an id, and every
client-side thread map (expansion, cache, loading flag, counts,
virtualizer key) mixed them up the same way.
Give ThreadGroup an account-scoped `threadKey` derived from the email's
source stamps and key grouping and all thread state by it. `threadId`
stays the raw id for Thread/get, which #281 already routes to the owning
account. fetchThreadEmailCounts now asks each source account for its own
threads instead of one client for every id. Single-account views carry no
stamps, so their key is the bare id and nothing changes there.
On a shared, group or aliased mailbox every reply, reply-all and forward
went out as `identities[0]` - the account owner - whichever mailbox was
open. `autoSelectReplyIdentity` fused two behaviours: matching one of the
user's OWN identities, which never rewrites `From:`, and the domain
catch-all, which puts an address they have not configured into `From:`.
Only the first is safe for everyone, so it is now unconditional; the
rewrite stays behind the setting, which is what its description promises.
`findReplyIdentityId` already implemented that match and was referenced
only from tests.
`forward` is admitted to the match - it was excluded, so a forward from a
shared mailbox went out as the owner - but never takes the rewrite: a reply
continues a thread whose participants know the addressing, while a forward
introduces a rewritten From to a recipient the user just typed. Quick reply
matches own identities only, having no From row to show or correct a
rewrite, and now falls back to the primary's signature as the composer
does, so a shared-mailbox quick reply is still signed.
`findReplyIdentityId` now scans recipients in To, Cc, Bcc order rather than
scanning identities, and prefers an untagged identity over a differently
tagged sibling. Scanning identities let their order decide, and
`sortIdentities` puts the login's own address first - so `To: team@,
Cc: you@` replied as you, the case this is meant to fix.
Automatic selection is restricted to the active account: `composerClient`
follows the chosen identity, and a reply or forward still carries blobIds
only its own account's server can resolve. The dropdown still offers every
account's identities to pick by hand.
New messages are deliberately left gated: `composeFromAccountEmail` falls
back to `AccountEntry.email`, written once at first login, so resolving it
unconditionally would override a user-chosen default sender identity (#507).
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
After a reload the unified mailbox showed only the active account's mail;
other accounts appeared only once visited. Intermittent (~1 in 14), and
not a timeout - nothing on this path uses setTimeout/AbortSignal/race.
checkAuth awaits only the active account and restores the rest in a
fire-and-forget background loop, registering each client only after
connect() resolves. buildUnifiedAccountClients drops accounts with no
live client (`if (!c) continue`). And isConnected was persisted, so it
rehydrated stale-true: the account passed the isConnected filter while
failing the client lookup, and connectedAccountsSignature already looked
complete at mount so nothing re-fired - and the effects keyed on it only
recompute counts, never the list.
Clear isConnected/hasError on rehydrate so both the filter and the
signature describe this session, and refetch the open unified/cross list
when an account joins the connected set (growth only, not on first
render, not while a search owns the list). Extracted
connectedAccountsGrew so the membership check is testable without
rendering MailApp.
Verified the reset cannot block reconnection: checkAuth reads the full
account list and never filters on isConnected.
Fixes#950
Switching folders currently keeps an active search applied and re-runs
it in the newly selected folder — deliberate behavior from #553, where
users wanted the query to follow them across folders. Others expect the
opposite: clicking Inbox/Sent should drop the search and just browse the
folder.
Add an opt-in setting (Settings → email behavior) that reconciles both.
Default is off, so #553's search-follows-you behavior is unchanged for
everyone. When on, any folder click clears the text query and advanced
filters and browses the folder instead of re-running the search.
Applied uniformly across the four folder-entry paths in MailApp — normal
mailboxes, per-account (Pro sidebar) folders, unified views, and cross
views — via one helper so no path diverges.
A message with attachments showed a paperclip and nothing else, so the
only way to reach a file was to open the message, scroll to the bottom
and find it. The list rows never had the information to do better:
EMAIL_LIST_PROPERTIES asked for hasAttachment, a boolean.
Request attachments alongside it and render the files as chips under the
preview, each one opening that file directly. Chips honour the existing
mailAttachmentAction setting, so they preview or download exactly as the
viewer's attachment list does.
Inline parts are filtered out. A single Outlook message routinely carries
half a dozen cid: signature spacers of under 200 bytes; chipping those
would bury the one file the reader actually wants. Only parts that are
neither inline nor cid-referenced, and that carry a filename, are shown —
two at a time, with the remainder collapsed into a count.
Downloads resolve the blob source from the row's own message rather than
the selected one, so they stay correct in the unified inbox where each
row can belong to a different account.
Once a search runs the header field shows the active query, but the only
way back to the full list was to open the panel and clear it there.
Put a clear button at the trailing end of the field, shown only while a
query is applied. The field is now a container rather than one button,
since nesting a button inside a button is invalid markup — the label
area and the clear control are siblings.
The full-screen panel is fixed inset-0, so it sat on top of the very
list it filters: submitting a query worked, updated the list underneath,
and left the reader staring at an empty panel.
Close it on submit, on picking a contact suggestion, and on clear, so
the results it just produced are what you land on. The header field then
shows the active query rather than the placeholder, so a filtered list
does not look unexplained, and tapping it reopens the panel to refine.
SearchBox gains an autoFocus prop so the panel opens straight to the
keyboard instead of needing a second tap.
Phones stacked two 56px bars: the mailbox title, then a row holding
select-all, the search box, the filter toggle and refresh. That is 112px
of chrome before the first message, and the title merely repeats what
the drawer already shows.
The header now carries the account avatar and a tappable search field,
and the second row is presented full-screen when that field is tapped —
so the same SearchBox, suggestions, history and filter chips appear,
none of it rebuilt. Select-all and refresh remain in that panel, and the
list already supports long-press selection and pull-to-refresh.
Tablet and desktop are unchanged; the row is only relocated on phones.
The mobile/tablet sidebar was pinned with physical direction utilities —
left-0 and -translate-x-full — which do not flip under dir="rtl". In
Hebrew the drawer therefore anchored to the left edge and slid in from
the left, away from the hamburger button that opens it.
Use the logical start-0 for the inset, and pair the physical translate
with an rtl: override, since translate-x has no logical equivalent. The
RTL rule is emitted after the LTR one, so it wins the cascade despite
Tailwind wrapping rtl: in a zero-specificity :where().
Linus Rath
Linus Rath
lucamzanon
Patrick RotterandClaude Opus 5
Stefan Hildebrandt
Shuki Vaknin