The settings pass hid each calendar's CalDAV address behind "Use in
other apps"; pim-26 lists the address once per account. The list now
waits behind one "Use in other apps" button, and the wording test
clicks the new Edit… button instead of the old pencil.
With two accounts signed in, Calendar showed only the active one's
calendars. Now, as in the Pro interface, the sidebar lists each
account's calendars under its name, each with its own checkbox, ticked
by default, and the grid shows the ticked ones together. Creating,
editing, moving, deleting and answering an event of the other account
go through that account; tasks of all accounts are listed and change in
their own account.
- a calendar one account sees as shared and the other owns shows once
- a load or push that names one account keeps the merged list
- an event made in the other account's calendar no longer takes the id
of the active account's event with the same raw id
- a change to an event the store no longer holds still goes to the
account its id names
The providers test now expects the palette option, because the palette keeps its paging apart from the mail list's. The search-merge test for a position with no cursor changed too: it used to expect that position sent to the server, which skips rows after a merge.
The review of offline mode found ways to send a message twice, to lose
unsent mail without a word, and to send mail without its signing,
encryption or check plugin. This fixes them and the smaller findings:
- each outbox message is taken for sending in one database transaction
under a Web Lock per account; only a failure before the submission
request (SendNotStartedError from the client) puts it back, any other
one marks it "may have gone out"; read-backs after the submission no
longer fail a send; a send of a closed tab turns uncertain after a minute
- every sign-out the user didn't confirm names the deleted messages on
the sign-in page, or in a toast when another account stays signed in
- nothing is queued while an enabled plugin isn't running (after a start
without the network none can); the composer says why
- the outbox waits for a fresh policy and holds messages the rules have
since made stricter (a required label, a required send check)
- another tab switching offline mode off sticks: only switching it on
may create the database
- only attachments of kept messages are kept, filed with their message,
deleted with it and under the cap between syncs; file names and types
are sealed; folders that went away leave the scope, and a folder that
couldn't be asked keeps its mail without holding the others back
- a group scope that forbids offline mode waits until the account's
groups are known; one server down no longer holds another's mail
- an offline start only when the server is really unreachable, and the
real sign-in follows by itself once it answers
- the service worker files pages and chunks under the build that served
them, and the shell list of another build isn't kept under this one
- a raw send counts as the composer's only from the plugin running its
takeover, for that identity
- errors and refusals are in all languages; the banner tells "offline"
from "server can't be reached"; outbox buttons name their message;
changes and messages go in the order they were made
Settings > Backup & reset gets "Keep mail on this device", off until the
user turns it on in this browser. While it is on:
- the JMAP client hands the server's answers to an encrypted cache in
IndexedDB (AES-GCM, non-extractable key) and answers from it when the
network is gone: the folder list, the last 30 days of the Inbox and of
the folders the user opened, bodies and attachments, at most 250 MB,
oldest out first; a background sync keeps it current
- read, flag, tags and moves made offline are queued and sent in order
when the server answers again; deleting for good and emptying a folder
are refused offline
- the composer, quick reply and the S/MIME and PGP plugins' sends that
complete the composer's go to an outbox once every step up to the
transport ran (checks, label, signature, plugin send checks); only the
finished send waits, with files attached offline
- the service worker keeps this build's app shell, so the app also
starts offline from the kept session and the last policy
- a full sign-out, the idle sign-out and signing one account out delete
it, a sign-out the user starts asks first when mail is unsent, and the
login page names what an automatic sign-out deleted; a policy fetch
that forbids it (devices.noOffline) wipes that account
Not in Lite.
api.tasks.create and update take links by id (an http(s) URL, a mailto:
address or a path of this Bulwark, stored as its full URL; at most ten)
and relatedTo (by a mail's Message-ID or another object's UID, with its
relation types; at most ten). They merge on update as alerts do: an
entry given is set, one given null is removed, and entries the plugin did
not name, such as an attachment's link another app wrote, stay as the
server holds them.
TaskView returns both as any app wrote them. Lengths, ids and URL
schemes are checked as the rest of the calendar API checks them. Task
reads now ask the server for links too.
Message ids repeat across accounts, so a hook payload naming only an
emailId could not tell a plugin which mailbox the message lies in when
it is a shared or group account's.
onBeforeEmailStarToggle and onEmailStarToggle now carry accountId when
the starred message is not in the user's own account, as the
message-row-actions click context does. Every star (the row's button,
the reader's star, the key, the menu) goes through toggleStar, one
message at a time, so one accountId names it; the account is resolved
before the plugins are asked. An own message's payload is unchanged.
onAfterEmailSend now carries accountId, the JMAP account the sent
message lies in (a mail sent from a shared or group identity lies in
that account), so api.email.get finds it. sendEmail returns that account
as emailAccountId, the S/MIME send too. The hook also carries
composerId, the id the sending composer's slots and actions gave
plugins, so a plugin can act on what the user chose in that composer.
Stalwart runs the SMTP RCPT stage while it creates a submission and
records a refused recipient as `delivered: "no"` with its reply: a relay
it doesn't allow ("550 5.1.2 Relay not allowed.") or a used-up throttle
("452 4.4.5 Rate limit exceeded, try again later."), on 0.16 and 1.0
alike. The create still succeeds and onSuccessUpdateEmail files the
message in Sent. Bulwark read only the new record's id and sendAt, said
"Email sent", and on Stalwart destroyed the record right after, the only
trace of the refusal. The message was lost without a bounce.
- the send reads the new submission's delivery status in the same
request (`EmailSubmission/get` by its creation id; the create's answer
has none), before the record is destroyed
- every recipient refused: the send fails with the server's reply per
address, the copy filed in Sent is removed and the user's draft kept,
so the address can be fixed in the composer; held sends (undo send,
scheduled) are refused when created, so this covers them too
- some recipients refused: the others get the message, and a warning
names the refused ones with their replies
- "Send now" and "Reschedule" keep the original when every recipient of
the replacement is refused, instead of cancelling it
- the submission prune leaves a shared account that refuses its records
alone for the session, without a warning: 0.16 lists an account that
only shared an address book or a calendar with the submission
capability
Follow-ups to the review of the push, keyword and identity work:
- A send that names no sender, like the List-Unsubscribe mailto: of the
unified view, fell back to the first identity in server order, which
on Stalwart 1.0 is a group's. It now takes the login's own identity,
with addresses compared regardless of case.
- Re-register creates the replacement subscription before it destroys
the old one, so at Stalwart's limit (15 per account by default) it
failed with `overQuota`. It now frees the old record's place and
tries once more.
- On 1.0 the push settings note goes by the emailpush capability alone
and ignores refusals remembered under 0.16. On 0.16 a group the user
belongs to is recognised by its identity, so a member without
calendars, contacts or files keeps the group's junk filter and is no
longer told the group sends no notifications.
- Plugin imports can no longer set Stalwart 1.0's attachment keywords,
and `keywords.discover` leaves them out.
- Batch mark-as-read showed messages the server refused as read. It now
updates only what was written and reports the rest, and thread
expansion and category-tab moves keep what a partly refused batch
did write.
- Refused read and star changes from shortcuts, the list, the viewer
and Pro tabs show "Failed to update email" instead of an unhandled
rejection. The automatic mark-as-read on opening stays quiet.
- A tag whose id predates the 128-byte limit can have its colour
changed again.
- The state-regression guard notes that a multi-node 1.0 cluster can
trip it harmlessly, at the cost of one extra full fetch.
With directory queries off on Stalwart 1.0, the free/busy list under the
attendees disappeared without a word. The share dialog explained every
`forbidden` from Principal/query with the 1.0 text: "only your groups
and people who have shared with you are listed", and a hint at
Stalwart's sharing settings. On 0.16 that refusal only means the role
lacks the permission, Principal/get then lists everyone, and the setting
has no effect over JMAP.
- When the server refuses free/busy for the user (`mayGetAvailability`
false on the user's own principal, or a lookup refused with
`forbidden`), one muted line says "Free/busy isn't available on this
server". The block stays empty only when the server offers no
free/busy at all.
- The share dialog keeps the 1.0 wording for Stalwart 1.0's own refusal
("The administrator has disabled directory queries.") and otherwise
says "Your server doesn't let you browse its user directory.", still
listing whoever Principal/get returned.
While an event or task uses its calendar's default alerts, Stalwart 1.0
shows those defaults in `alerts` instead of the item's own, and drops
alerts under the default alerts' ids on save. The event editor renamed
every alert to alert1..N and sent them on every save, with the defaults
left on, so on 1.0 an alert change never showed up again, and every
save stored hidden copies of the defaults.
- send `alerts` only when the user changed them; untouched alerts keep
their id and stay exactly as they were
- when the alerts of an item that uses the defaults change, turn the
defaults off for it (`useDefaultAlerts: false`, as the native app
does) and give its alerts ids of their own, in the event and the
task editor
The local reminder engine reads either the calendar's defaults or the
item's own alerts, never both, so the defaults 1.0 fills in do not
fire twice.
Bulwark counted a FileNode as a folder when it had no blobId. Stalwart
1.0 adds symlinks, which have no blob either, so they showed up as
empty folders that could be opened, and folder copies recreated them
as such. Listings now ask for `nodeType` (returned since 0.16.6) and a
single helper, `fileNodeKind()`, decides what a node is in the Files
store, the copy code and the global search, falling back to the blobId
rule when `nodeType` is missing. `nodeType` is never sent in
FileNode/set.
A symlink is shown as an inert row with a link icon. It can be renamed,
moved and deleted, but not opened, previewed, downloaded, copied or
shared, and folder copies skip it.
Stalwart 1.0 lists the folders above a node shared with the user, so
the tree can be walked down to it, but without dates and with every
right false. Bulwark took the owner's top folder for the shared root:
the folder that was actually shared sat several levels further down,
and rename, delete and move were offered on folders where they could
only fail.
Nodes of other accounts with no `modified`, no `created` and no rights
are now marked as placeholders. They are left out of the shared roots,
of shared-drive listings and of search hits; search still uses them to
show the path of a hit below them. 0.16 always returns `modified`, so
nothing changes there.
Stalwart 1.0 reads a text filter value that starts and ends with a
quote as one exact phrase, and a value ending in `*` as one prefix over
the whole string, not split into words and capped at 16 bytes. Every
search path sent the typed input as one `text` value, so on 1.0
`"annual report" 2024 "draft"` became a single four-word phrase and
`project budg*` a prefix containing a space: both found nothing.
`"Q3 planning" budget` lost its phrase on every version.
`splitSearchText` (`lib/jmap/search-utils.ts`) now sends each quoted
phrase and each `word*` as a condition of its own, ANDed with the rest.
The remaining words stay one condition, so a query without quotes or
stars goes out as before. Outer single quotes are stripped from that
part, since 1.0 reads them as a phrase too. The split applies to:
- the search bar, tag views, cross-account and all-folders search;
- advanced search, including the from/to/subject/body fields;
- contact search;
- global search for mail, contacts and calendar.
`inMailbox` and the calendar bounds sit next to the text conditions in
one AND, with one key per condition: Stalwart rejects an operator that
also carries property keys, and 1.0 allows only one AND group when it
expands recurrences.
SearchSnippet/get switches the whole request to exact matching once a
term is quoted, which marks nothing for a phrase ANDed with other
words, so the snippet filter unquotes phrases.
On 1.0 and on external search backends each phrase is now a real
phrase. The 0.16 built-in index reads it as an AND of its words,
without stemming. The dev mock and the demo client now evaluate AND
filters and quoted phrases, so they keep working with the new shapes.
Stalwart 1.0 allows 100 Principal/getAvailability calls per account a
minute and counts every call, however they are batched. The event form
sent one request per attendee whenever the time or the attendees
changed, and showed "Available" for an empty answer, which is also what
the server returns when the user may not see that person's free/busy.
- Answers are cached for three minutes per principal and the local
days the event touches, so moving an event within its day asks
nothing new; the status for the exact time is worked out locally.
- Lookups already on their way are shared, and the principals without
an answer go out in one request, split by `maxCallsInRequest`.
- After `rateLimit` nothing is sent for a minute, and attendees without
an answer show "Couldn't check".
- An empty answer shows "No busy times shared" instead of "Available".
0.16 has no rate limit; it gets the same labels with fewer requests.
Stalwart refuses a push subscription's whole emailPush map as
`forbidden` when it names a mailbox shared by ACL (0.16.16 and later,
and 1.0). Bulwark put every account with mailboxes in the map, so
enabling push showed raw JSON, and the background re-sync destroyed the
working subscription after its refresh was refused and dropped its key:
push stopped without a word and could not be turned back on while the
share existed. A network error, a timeout or rate limiting during the
refresh ended it the same way.
- The map holds the primary account and the accounts that list
`urn:ietf:params:jmap:emailpush`, which 1.0 leaves off ACL shares.
0.16 lists it everywhere, so a refused map narrows to the accounts
that look owned, then to the primary account, as the mobile app does.
Refused accounts are remembered under
`bulwark.push.emailPushRefused.v1.<id>`; Re-register and disable
clear the list.
- A subscription ends only when a verified replacement exists, the user
turns push off, or the server no longer has it. The old record is
destroyed after the new one is verified. A failed listing, a network
error or a refused method call leave it and its key alone.
- PushSubscription/set failures throw typed errors (`jmapSetError` for
a refused object, `jmapError` for a refused call) instead of JSON in
the message or `false`, and the client exposes `getAccountInfo`.
- Settings says that mailboxes others share don't send background
notifications, and `forbidden` and `overQuota` read as plain text in
settings and the onboarding prompt.
Stalwart 1.0 refuses Principal/query and Principal/getAvailability with
`forbidden` unless the administrator allows directory queries, which is
off by default. `getPrincipals` turned that into an empty list with no
signal: the share dialog said "No other users or groups found", existing
shares showed bare ids, and free/busy called every attendee "Not a user
on this server".
- `listPrincipals` says whether the listing is complete, `restricted`
or failed. On `forbidden` it falls back to Principal/get without ids,
which 1.0 still answers with the user's own account, their groups and
the accounts that shared something with them.
- Principal/get asks for `id`, `type`, `name`, `description` and
`email` only; 1.0's default list adds `capabilities` and `accounts`.
- One listing per client, kept for five minutes, serves the share
dialog, recipient autocomplete and free/busy, which used to download
the directory three times.
- The share dialog explains a restricted directory while still offering
its candidates, says when the list failed to load, and shows "Unknown
user" with the id for sharees it can't name.
- Free/busy first reads `mayGetAvailability` from the user's own
principal and stays hidden when it is false or a lookup is refused
with `forbidden`. "Not a user on this server" now needs a complete
listing; failures and `rateLimit` show "Couldn't check".
On 0.16 with the default roles the listing is complete and the dialog
behaves as before.
Stalwart 1.0 returns every photo, logo and sound in a contact card as a
blobId without a uri, including every photo Bulwark saved as a data:
URI. Bulwark read only `uri`, so avatars, the contact list and detail,
print, vCard export and the "has photo" filter showed nothing, and the
form sent `media` without the photo on every save, so editing a phone
number deleted the photo on the server.
- `ContactMedia` carries `blobId`, `label`, `pref` and `contexts`; `uri`
is optional, and `getContactPhotoRef`/`hasContactPhoto` read both.
- Blob photos are downloaded once each, at most two at a time and at a
paced rate, only while on screen, into an LRU of object URLs revoked
on eviction, account switch and logout. They share Stalwart's
per-account budget of 4 concurrent requests and 1000 a minute.
- Avatars look senders up in an index built once per contact list.
- The form leaves `media` out unless the photo changed, and otherwise
passes the other entries through as the server returned them.
- A new photo is uploaded into the user's own account and sent as a
blobId where the blob capability lists ContactCard (1.0). 0.16 refuses
blobIds in media and keeps getting a data: URI; a refusal at runtime
falls back the same way for the rest of the session.
- Print and vCard export download blob media first; duplicate and
cross-account move send the bytes instead of the source's blobIds.
- vCard export also writes photos whose data: URI names no media type
(`data:;base64,`, `data:base64,`), which it dropped before.
Stalwart rejects a whole ContactCard over one property it does not
know, and several reached it:
- the form sent `calendarUri`, `schedulingUri` and `freeBusyUri`,
so any contact with a calendar, scheduling or free/busy link failed
to save ("Invalid property.")
- vCard import sent `source`, and Pro mode left `localAccountId` on
the card
- vCard import wrote addresses as flat `street`/`locality` fields
instead of RFC 9553 `components`
The card now passes through `lib/jmap/contact-wire.ts` on its way to
the server: client-only fields are dropped, the links are written as
`calendars` / `schedulingAddresses` (and SOURCE as a `directories`
entry), flat addresses become components, and reads map the links back
for the form and detail view.
Clearing a field (nickname, notes, a link) never reached the server:
the form set it to `undefined`, which JSON drops, and an omitted
property keeps its value. Updates now send `null` for cleared keys.
Deleting an address book that still held contacts always failed with
`addressBookHasContents`. The delete now passes
`onDestroyRemoveContents`, which the confirm dialog already promised.
JMAP thread ids are only unique within their account - Stalwart hands out
per-account counters such as "b" - so the cross-account views merged
unrelated conversations that happened to share an id, and every
client-side thread map (expansion, cache, loading flag, counts,
virtualizer key) mixed them up the same way.
Give ThreadGroup an account-scoped `threadKey` derived from the email's
source stamps and key grouping and all thread state by it. `threadId`
stays the raw id for Thread/get, which #281 already routes to the owning
account. fetchThreadEmailCounts now asks each source account for its own
threads instead of one client for every id. Single-account views carry no
stamps, so their key is the bare id and nothing changes there.
Stalwart Mail Server strictly validates JSCalendar task properties on CalendarEvent/set and rejects updates containing top-level progressUpdated with invalidProperties (RFC 8984 §5.2.2 only defined progressUpdated on Participant objects, obsoleted in JSCalendar 2.0).
- Omit progressUpdated from toggleTaskComplete in stores/task-store.ts
- Remove progressUpdated from CALENDAR_TASK_PROPERTIES in lib/jmap/client.ts
- Defensively strip progressUpdated in updateCalendarEvent and createCalendarTask
- Make progressUpdated optional in CalendarTask interface
- Add unit tests for task-store and JMAP client task methods
Recurring events defaulted skip:"omit"+rscale:"gregorian" on every rule,
which Stalwart serialises into the CalDAV RRULE as RSCALE=GREGORIAN;SKIP=OMIT.
DAVx5 rejects that ("Invalid recurrence rule"), breaking Android sync. Those
RFC 7529 fields only matter for non-Gregorian scales / invalid-date handling,
so stop emitting them for plain Gregorian rules.
- lib/recurrence-rule.ts: createRecurrenceRule() helper with no skip/rscale.
- CalendarRecurrenceRule.rscale/skip are now optional.
- event-modal + recurrence-editor build rules via the helper.
- demo fixture cleaned; unit test asserts no skip/rscale.
Closes#805.
Linus Rath
Jacob Zeitz
lucamzanon
Sebastian Sanitz
Stefan Hildebrandt