Stalwart's default folder set has no archive-role mailbox, so on a fresh
account Archive did nothing but raise the not-found toast (#578). Both
archive paths now go through ensureArchiveMailbox(), which creates
"Archive" with the archive role in the account the action targets (own,
the selected shared folder's owner, or the pinned account in unified
view), reloads the mailbox list and continues with the store's own
object. createMailbox() takes an optional role for this. A refused
creation or a folder that does not come back still surfaces as an error.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
A copy between logins goes through `Email/import`, which sent no
`receivedAt`, so the server stamped the import time and every copied
message landed at the top of the destination folder as today's mail.
`importRawEmail` now takes the original `receivedAt` (the same change
#1151 carries), and the cross-account copy and move pass it.
A send answered without an EmailSubmission threw a fixed English
message, which the composer showed as is in every language. It now
throws `SendUnconfirmedError`, and the composer shows the existing
`send_timeout` text, the same advice as for a send whose answer was
lost: check Sent before sending again.
With several accounts connected, mail could only be moved between
them (drag to another account's folder). There was no way to file a
copy in another account and keep the original where it is.
crossAccountMoveEmails and copyEmailAcrossAccounts take an optional
`{ keepOriginal: true }`. With it the source message is not destroyed,
and the store leaves the list, the open message and the selection as
they are; only the destination's folders are refreshed. Without it
nothing changes.
The message menu gets "Copy to account..." when more than one account
is connected. It lists the writable folders of the other accounts
(their folder lists are fetched when the menu opens) and copies the
selection, or the message the menu was opened on, through the new
copyEmailsToAccount action. That groups the messages by the login and
JMAP account they live in and refuses a copy into the account a
message is already in.
When the response carries no EmailSubmission - a method error, or no
answer for it at all - nothing confirms the message left, yet the send
went on as if it had: the old draft was replaced and the composer
closed. It now fails with "Send confirmation was not received" and
keeps the draft, so the user can check Sent before sending again.
An empty notCreated map is a success some servers spell out; it is no
longer read as a failure.
Drafts were saved without In-Reply-To and References, and a draft
re-opens in compose mode, where the composer has no original message to
rebuild them from. A reply that was saved and re-opened, or sent and
brought back with Undo, therefore went out as a new conversation.
`createDraft` now stores the threading headers, the composer saves them
with every draft of a reply, and re-opening a draft carries them into
the composer for later saves and the send.
Marking read, starring, tagging, emptying a folder and cancelling a
scheduled send only checked that the request came back. A `/set` the
server refused - `notUpdated`, `notDestroyed` or a method-level
`error` - resolved as if it had worked: the list showed the new state,
and a cancel the server rejected looked cancelled while the message
still went out.
These writes now go through one check that throws on any of those, so
the store keeps the old state and shows the server's reason.
`getEmails` and `getSomeEmails` caught every failure and answered with
an empty result. A refresh during a server hiccup therefore emptied the
message list, and a push delta whose follow-up read failed treated every
updated row as gone from the folder while still moving the sync state
past those changes, so the missed mail only came back on a full reload.
Both now throw. A refresh that fails keeps the list on screen, a delta
that cannot be read falls back to the full refresh, and the unified
views already record per-account failures instead of showing nothing.
The state poll puts two method calls per session account, plus
calendars and filters, into one request. From seven accounts on (the
server's default limit is 16 calls) Stalwart refused the whole request,
and the failure was swallowed, so new mail and folder changes stopped
showing up for users with many shared accounts. The poll now goes out
in batches of `maxCallsInRequest`, one after the other.
A network error on a JMAP request was retried once after a second.
Timeouts were already excluded, but a connection that failed after the
request was written (a reset, a proxy dropping the answer) still
replayed the whole batch, so one click on Send could queue two
submissions and deliver the mail twice. Only requests that change
nothing are retried now: GETs, blob uploads and batches made only of
read methods.
A message sent or scheduled from a shared or group identity lives in
that account. Undo send, "Edit" on a scheduled message and cancelling
one cancelled the submission in the right account (#874), but then
restored the message to Drafts, fetched and deleted it through the
login's primary account. That hit whichever primary message had the
same id - pulling an unrelated mail into Drafts or deleting it - and
left the unsent message sitting in the group's Sent.
`restoreEmailToDraft` now takes the account, and the store passes the
submission's account to restore, fetch and delete, using that
account's Drafts and Sent.
Attachment thumbnails were object URLs typed with the sender's MIME
type. Object URLs share the webmail origin, so an `image/svg+xml`
attachment opened from its thumbnail ("Open image in new tab", or
dragged to the tab strip) ran the sender's script as the webmail in
Chromium and Firefox. The drag-out URL and Files thumbnails had the
same shape.
`fetchBlobAsObjectUrl` now re-types every blob to an inert type, and
image thumbnails in mail and Files go through `imageBlobUrl`, which
hands an SVG over as a `data:` URL: it still renders in the `<img>`,
but opened on its own it gets an opaque origin.
The Authentication-Results parser matched `dmarc=` and `dkim=` anywhere
in all headers joined together. A sender who used `dmarc=pass@...` as
the envelope address got a green DMARC pass for a message that failed,
because the server echoes that address in the SPF clause before its
real `dmarc=fail`. A sender could also add their own
Authentication-Results header to an unsigned message and get a DKIM and
DMARC pass. Calendar invites from such a message were shown as trusted.
The parser now splits each header on `;` outside quoted strings and
comments and reads the method only at the start of a part. DKIM, DMARC
and iprev come from the topmost header, which the receiving server
wrote; lower headers can only escalate SPF to a failure.
The composer uploaded any file and learned about `maxSizeUpload` (per
blob) or `maxSizeAttachmentsPerEmail` (per message) only from a failed
upload or a failed send. Files over the per-file limit, and files that
would push the message past the per-message limit, are now skipped
with a message naming the limit. The limits come from the account the
message is composed in.
From 0.16.21 Stalwart fails the whole CalendarEvent/set with
`forbidden` when the account may not send scheduling messages, so an
event with attendees was not saved at all and the calendar showed only
"Failed to save event".
Such a refusal now surfaces as SchedulingDeniedError, and the calendar
names the server's reason and offers to save the event without sending
the invitations.
The share dialogs and the availability view listed principals with an
unbounded Principal/query whose ids fed one Principal/get. Once the
directory held more principals than `maxObjectsInGet` (500 on
Stalwart), the server refused the get with `requestTooLarge` and the
list came back empty. The listing now pages in steps of
`maxObjectsInGet`.
"Mark all as read" paged through the unread messages by position, but
each page it marked dropped out of the unread query, so every other
page was skipped: with more unread mail than one page (500), part of it
stayed unread. The next page now starts after the messages that were
left unread (those in excluded folders) only.
Neither mark-as-read loop checked the Email/set result. A refused
update made "mark folder as read" fetch the same unread ids forever;
it now stops with an error. Marking as spam and "not spam" also
ignored `notUpdated` (e.g. a Junk folder the server no longer knows)
and showed success; they now report the failure.
Moving mail into a shared account used `Email/copy` with
`onSuccessDestroyOriginal`. Stalwart before 0.16.15 destroys the wrong
id with it, and from 0.16.15 it destroys the source even when the copy
failed, so a move refused for quota or a missing message deleted the
original with no copy anywhere.
The copy now runs without that flag, and the source is destroyed with
a separate Email/set only after the copy was created. A failed destroy
is reported, leaving a duplicate rather than a loss.
From 0.16.6 Stalwart refuses FileNode names with `/<>:"\|?*` or a
reserved name such as `CON` ("Name contains a forbidden character."),
and publishes the rules as `forbiddenNameChars` / `forbiddenNodeNames`.
Bulwark did not read them: the error showed up only after an upload had
started, and it aborted the rest of a multi-file or folder upload.
- new folder, new text file and rename now say which characters or
names the server does not allow, before sending anything
- uploads store an accepted variant instead: forbidden characters
become `_` and a reserved name gets `_` appended
MIME types over 30 characters (most Office formats) were always stored
as `application/octet-stream`, because Stalwart before 0.16.6 refuses
them. From 0.16.6 the limit is 255, so the real type is kept there.
Stalwart before 0.16.6 implements an older JMAP File Storage draft
whose rights are only `mayRead`, `mayWrite` and `mayShare`. Bulwark
always sent the newer `mayAddChildren` / `mayRename` / `mayDelete` /
`mayModifyContent`, so sharing a file or folder failed there with
`Invalid permission "mayAddChildren"`, and the rights such a server
reported did not match what the UI checks.
When the account's filenode capability lacks `forbiddenNameChars`
(added by the same draft update), shares are now written with
`mayWrite` set from the finer rights, and `mayWrite` read from the
server is spread over them.
Copying a folder sent one FileNode with no content, which Stalwart
0.16.0 rejected ("size") and 0.16.6+ turned into an empty folder. Copy
now recreates the subtree level by level, and copies into another
account move the file contents with `Blob/copy`.
Every write (new folder, upload, rename, move, delete, copy, share)
went to the primary account, including for nodes of a shared drive,
which the listing names "<accountId>:<nodeId>". Inside a shared drive
the server read those ids as local ones and failed or touched the
wrong node. Writes now go to the account that owns the node, with the
bare id, and a move between accounts is refused instead of being sent.
Creates pass `onExists: "rename"`, so an upload or new folder that
clashes with an existing name becomes "name (2)" instead of failing.
Stalwart before 0.16.6 ignores that argument and refuses the clash, so
the client retries with a numbered name there.
CalendarEvent/query reads `after`/`before` as local date-times in the
request's `timeZone`, and Stalwart silently drops a `Z` or offset. The
proactive alert fetch and the contact activity panel sent UTC strings,
so their windows were shifted by the user's UTC offset (two hours in
Berlin in summer). UTC and offset bounds are now converted to the wall
clock of the request time zone before the query is sent.
With server-side expansion, a range with more than
`maxRecurrenceExpansions` occurrences (a daily series over ten years)
failed the whole query with `invalidArguments`, and the calendar showed
nothing. The query now falls back to the unexpanded series, which the
calendar expands on the client as it does for older servers.
The query also stopped at a fixed 1000 ids. Without an explicit limit it
now pages until the range is complete.
Stalwart rejects a whole ContactCard over one property it does not
know, and several reached it:
- the form sent `calendarUri`, `schedulingUri` and `freeBusyUri`,
so any contact with a calendar, scheduling or free/busy link failed
to save ("Invalid property.")
- vCard import sent `source`, and Pro mode left `localAccountId` on
the card
- vCard import wrote addresses as flat `street`/`locality` fields
instead of RFC 9553 `components`
The card now passes through `lib/jmap/contact-wire.ts` on its way to
the server: client-only fields are dropped, the links are written as
`calendars` / `schedulingAddresses` (and SOURCE as a `directories`
entry), flat addresses become components, and reads map the links back
for the form and detail view.
Clearing a field (nickname, notes, a link) never reached the server:
the form set it to `undefined`, which JSON drops, and an omitted
property keeps its value. Updates now send `null` for cleared keys.
Deleting an address book that still held contacts always failed with
`addressBookHasContents`. The delete now passes
`onDestroyRemoveContents`, which the confirm dialog already promised.
Stalwart advertises `maxDelayedSend` as a fixed 30 days, but its MTA
rejects any hold beyond `futureRelease`, 7 days by default. Scheduling
a message 8 to 30 days ahead passed the picker and then failed with
"501 5.5.4 Requested hold time exceeds maximum of 604800 seconds".
On Stalwart the advertised 30 days now counts as 7. When a submission
is still rejected for its hold time, the limit from the error message
replaces it for the session, and the composer shows the translated
"later than the server allows" message instead of the raw SMTP reply.
JMAP names a failed method call `"error"` (RFC 8620 §3.6.2). The send
paths (normal send, raw/S-MIME send and submit, iMIP reply, invitation
and cancellation) and Sieve validation tested for `"<Method>/error"`,
which never matches, so a refused Email/set or EmailSubmission/set
could be reported as sent.
A method error before the submission is created now fails the send.
One after it comes from the implicit onSuccessUpdateEmail /
onSuccessDestroyEmail call: the message has already left, so it is
reported as a filing warning, not as a failed send that would invite a
duplicate resend.
Search turned every failure, including a method error such as
`unsupportedFilter`, into an empty result that read as "No results
found". A failed Email/query now throws, which the search view shows as
an error and the "All folders" fan-out reports per account.
CalDAV-originated tasks can retain uppercase, underscore-separated, or single-l status spellings in CalendarEvent responses. Normalize known spellings at JMAP response boundaries so task filters and completion controls see canonical JSCalendar values while unknown future values remain intact.
Work around the upstream conversion defect tracked at https://github.com/stalwartlabs/calcard/issues/20.
Linus Rath
sudandClaude Fable 5.1
lucamzanon
Linus Rath
mulatta