A PatchObject key is a JSON Pointer (RFC 8620 section 5.3), so a slash
inside the member name it points at has to be escaped as `~1`. Keyword
patches were built as `keywords/${keyword}` verbatim, which is fine for
every flat keyword but wrong for a nested tag: `$label:work/clients`
became the pointer `keywords/$label:work/clients`, asking for the
`clients` member of the `$label:work` keyword rather than for the keyword
itself. The patch is not a boolean at that path, so the server rejects or
ignores it and the tag never lands.
Route the keyword patch sites - setKeyword, removeKeyword, migrateKeyword
and the category-tab batch patch - through `keywordPointer`, which escapes
per RFC 6901 the way the calendar store already does for participant ids.
Flat keywords are untouched, so `$seen`/`$flagged` and friends keep the
exact pointers they had. The dev JMAP mock reads the escaping back, or
nested tags would behave differently against the mock than against a real
server.
migrateKeyword also took any answer as success: a method-level error on
the query read as "no message carries this keyword", one on the write was
ignored outright, and a per-message refusal was invisible - so a rename
that moved nothing still reported a clean migration. It now answers with
{ migrated, refused }, because the work is batched and a failure partway
through cannot undo the batches already applied. A whole batch the server
refuses stops the rest, which it would refuse too; a single message it
refuses does not, the mail behind it being unaffected. A query error
throws, nothing having been written yet, and so does a run that migrated
nothing at all - the case where the caller must not rename a tag over
messages that all kept the old keyword.
The walk over tagged mail was not paginating safely either. It stopped at
the first page shorter than the limit it asked for, but RFC 8620 section
5.5 lets a server clamp that limit, so a clamping server left most of the
mail unmigrated. Positions are also only comparable within one queryState,
which the walk ignored: mail arriving mid-walk shifts every later page. It
now restarts when the state changes under it, and gives up - before any
write, so the caller can simply repeat - once a mailbox has moved under it
three times, rather than mixing ids from states that no longer agree. A
page carrying no id it has not already seen ends the walk, which keeps it
bounded against a server that answers every position with the same page.
contactUsing(), calendarUsing(), and fileUsing() checked the base
"principals" capability but then declared the separate
"principals:owner" sub-capability (RFC 9670) in the request's "using"
array. RFC 8620 section 3.3 requires a server to reject the whole
request if it declares a capability the server does not advertise, so
a server that supports base principals without the owner
sub-capability rejects every one of these requests with
unknownCapability.
Fixed to check the specific sub-capability being declared instead of
assuming it from the broader one. The calendar agenda route had the
same mismatch and is fixed the same way. Note that RFC 9670 section
1.5.2 places principals:owner in accountCapabilities rather than the
session capabilities, so on compliant servers the sub-capability is
simply never declared, which is the intent. Nothing is lost by
omitting it.
The file share test asserted the old behavior by expecting the owner
capability to be declared against a server that advertises only base
principals. It now asserts the capability is omitted in that case and
declared only when the server advertises it. The same pair of
assertions is added for the contacts, calendars, and agenda route
request builders, so each site this commit touches is covered against
regression.
If you have a large number of tags, getTagCounts would not be able to get the
unread counts because it did not respect maxCallsInRequest, even though the
value was actually read out, it was just ignored. There are also other places
where the limits were not respected.
Batching is now generalized in a helper that also takes maxObjectsInSet, which
also was ignored, into account and is applied to all functions.
In addition, the dev mock now also advertises and enforces the limits, so these
issues can get picked up during development.
Possible closes#699
Possibly closes#399
After a master-user impersonation handoff (GET /api/auth/impersonate) the server
swaps the slot-0 session cookie but the client's persisted account registry
(account-registry / auth-storage in localStorage) still lists the previous
account, so the top-left account chip keeps showing the old mailbox until a
manual sign-out. Redirect impersonation to /?impersonated=1 and add a headless
ImpersonationReconciler that drops the stale persisted account/auth state (and
server-derived caches) then reloads to a clean URL, so the app rehydrates empty
and re-derives the single account from the fresh session. Cookies untouched, so
the just-granted session survives. Runs exactly once.
Reported downstream: shukiv/jabali-panel#646.
Any transient failure used to end the session: the token route deleted
the refresh cookies on every non-OK answer from the OAuth endpoint,
refreshAccessToken logged out on any non-OK status or network error,
and the startup restore evicted the account and deleted its session
cookie. A server restart, a proxy hiccup, a Wi-Fi switch or a laptop
waking before the network is back all kicked the user out despite
"stay signed in".
Failures are now classified. Only a definitive rejection (400/401/403
from the OAuth endpoint, 401 from the token route) tears the session
down and deletes cookies, exactly as before. Network errors and 5xx
keep the session: the token refresh re-arms itself and retries every
~30 seconds until the server is back, and the startup restore keeps
the account, marked unreachable - the same treatment the rate-limit
carve-out (#104) already applies.
Token validity stays entirely server-enforced: the first definitive
401 after an outage still logs out as before.
Login header customization for white-label deployments, all defaults
preserve current behaviour:
- LOGIN_LOGO_MAX_HEIGHT / LOGIN_LOGO_MAX_WIDTH (any CSS length): the logo
box is otherwise a fixed 64x64 (w-16/h-16), which fits a wide wordmark to
~13px tall. When either is set, the fixed box is dropped and the logo
renders at the configured size.
- LOGIN_SHOW_HEADING / LOGIN_SHOW_SUBTITLE (default true): hide the
{appName} heading and/or the subtitle when the logo already reads as the
brand (e.g. a wordmark) and they'd be redundant.
Applied to the standard login header; wired through the existing config
registry (CONFIG_ENV_MAP) -> /api/config -> useConfig.
Refs #519.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The service worker hard-coded the notification icon and badge to the bundled /icon-192x192.png, so push notifications always showed the default Bulwark logo even when an admin had configured a custom PWA/favicon icon (which the manifest already honors via /api/pwa-icon).
Point both notifications at /api/pwa-icon/192, and make that endpoint fall back to the bundled default icon instead of returning 404 when no custom icon is set - so it always returns an app icon and the service worker (which can't run the custom-vs-default check itself) has a single stable URL.
Two opt-out branding/login flags, both default true (no behaviour change
for existing deployments):
- LOGIN_SHOW_TOTP=false hides the manual "I have a 2FA code" toggle on the
login form. Deployments that delegate auth to an external directory
(LDAP/OIDC) where 2FA lives in the IdP have no server-side TOTP, so the
toggle only ever leads to a failed login. Server-required TOTP
(totp_required, which auto-shows the field) is unaffected.
- LOGIN_SHOW_VERSION=false hides the build version in the login footer, so
the exact version isn't disclosed to unauthenticated visitors.
Wired through the existing config registry (CONFIG_ENV_MAP) → /api/config →
useConfig, matching the surrounding LOGIN_* options.
Refs #519.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Cleans up the lint warnings the pre-commit hook surfaces, without any
behavioral change:
- Remove unused imports/vars/destructured props (parseISO, useEffect,
format, durMin, roles, daysInYear, ALLOWED_PLUGIN_FILES, continuesBefore,
isPushConnected, isSelected) and the now-unused parseDuration import.
- Drop three stale `// eslint-disable-next-line no-undef` directives that
no longer suppress anything (browser-navigation, smime/crypto-engine).
- recurrence-expansion.test.ts: replace 39 `as any` casts with a cast-only
`rule()` helper for partial recurrence-rule fixtures, typed access to
utcStart/utcEnd (now on CalendarEvent), and the source's
`Partial<CalendarEvent> & { excluded?: boolean }` for the excluded
override. No defaults are injected, so the expansion logic sees the same
partial rules as before (35 tests still green).
Remaining: 7 react-hooks/exhaustive-deps warnings are left as-is — adding
the missing deps changes effect/memo timing and needs per-hook review, not
a mechanical fix. tsc --noEmit clean; eslint 0 errors / 7 warnings.
Lets a per-brand authorize host front a single canonical issuer, so the
IdP token's `iss` stays constant for downstream validation while login
branding varies per domain. Discovery, token exchange and refresh keep
using OAUTH_ISSUER_URL.
Give email-002 ("Project Update - Q1 Review") a sender and CC with
"Lastname, Firstname" display names so Reply/Reply-All in dev mode
exercises the comma-in-name recipient case end to end.
Linus Rath
Linus Rath
Paulhenry Saux
KazNIISA IT
zisisvakras
Eduard Polonskyi
Mathy Vanvoorden
shukiv
Maarten DraijerandClaude Fable 5
dealerweb
Chris Rowland
Stefan Hildebrandt
Loïs Postula