jeremyhi
a08e5bcceb
* fix(log-store): keep the enqueued backlog on permanent object store errors On object storage the WAL's object store sits behind OpenDAL's retry layer, which marks every error it returns as persistent. The enqueued mode classified create failures by that status, so a 403 or a missing bucket was repeated every 100 ms on every create in flight, logged nothing, and made appends hang once the sealed batches were full. Object store errors are now classified by kind: denied access, an invalid configuration (how OpenDAL reports a missing S3 bucket) and a write to a missing location are non-retriable. In the enqueued mode such an error makes the store failing instead of poisoning it: the acknowledged backlog is kept under its sequences and bytes, its lowest pending batch is attempted alone with a delay that doubles from 100 ms to 30 s, appends are rejected at once with a retryable error that carries the last object store error, and the first create that succeeds ends the state. Stop uploads the backlog at once and reports a failure as before. The state is logged on entry, at most once a minute while it lasts and on exit, and exported as the `failing` gauge and the `rejected_appends_total` counter. Conflicts, encoding and catalog errors still poison the store; the durable mode is unchanged. An append held back because the sealed batches are full is now counted and timed by the stall metrics in both modes. Signed-off-by: jeremyhi <fengjiachun@gmail.com> * docs(rfc): describe how the enqueued object store WAL handles refused creates Describe the enqueued failure contract as the store now implements it: non-retriable object store errors are told apart by kind because OpenDAL's retry layer under the store marks every error persistent, a failing store keeps its backlog and attempts it with backoff while it rejects appends, and stop uploads the backlog at once. Add the failure matrix row, the failing gauge and the rejected appends counter, the sealed-batch admission limit and the stall metrics that now count it, and the fault matrix case counts. Signed-off-by: jeremyhi <fengjiachun@gmail.com> * fix(log-store): time the failing attempts where they start and fix two statements The test of the attempts of a failing store now records when each refused write starts and checks the gaps between them, instead of sampling a counter after a sleep of the test task. The delay comment and the RFC describe 30 seconds as the longest delay between two attempts, not as a bound on when appends resume, and the RFC states that the next append is held once seven sealed batches wait. Signed-off-by: jeremyhi <fengjiachun@gmail.com> * test(log-store): drop the wait_until helper that main now defines Signed-off-by: jeremyhi <fengjiachun@gmail.com> * refactor(log-store): name errors that need an operator and trim the RFC contract Rename is_non_retriable to requires_intervention: such a create is still repeated, only slowly, until someone fixes the credentials, configuration or bucket. Name the backoff test after what it asserts, cut the test of the lowest pending batch to two failed rounds since the cadence is covered by the backoff test, and shorten the RFC failure contract to the contract and its rationale, leaving error mappings, request counts and logging cadence to the code comments. Signed-off-by: jeremyhi <fengjiachun@gmail.com> * docs(log-store): tie the slow repeat to errors requiring intervention Signed-off-by: jeremyhi <fengjiachun@gmail.com> --------- Signed-off-by: jeremyhi <fengjiachun@gmail.com>
Metrics, logs, and traces.
One engine, on your infrastructure.
A columnar database for metrics, logs, and traces on object storage. Apache-2.0 licensed core.
User Guide · API Docs · Roadmap 2026 · Slack
stable for production · canary includes pre-releases · nightly is a weekly snapshot of main
Introduction
GreptimeDB is an open-source observability database. Metrics, logs, and traces run on one columnar engine over object storage and share one table model: tags, timestamp, and fields. When signals carry common identifiers such as service, host, or trace ID, you can correlate them in SQL without moving data between databases.
Ingest through OpenTelemetry, Prometheus Remote Write, Loki Push, or Elasticsearch Bulk. Use SQL across observability data and PromQL for metrics. Migrate ingestion one signal at a time without rebuilding your collectors.
One Query Across Signals
OpenTelemetry ingestion writes spans to opentelemetry_traces and log records to
opentelemetry_logs. Both tables carry trace_id, so correlating them is a join:
-- The slowest failed spans in the last hour,
-- with the log lines emitted inside those same traces.
SELECT
t.service_name,
t.span_name,
t.duration_nano / 1000000 AS duration_ms,
l.timestamp AS log_time,
l.severity_text,
l.body
FROM opentelemetry_traces t
JOIN opentelemetry_logs l ON l.trace_id = t.trace_id
WHERE t.timestamp > now() - INTERVAL '1' HOUR
AND t.span_status_code = 'STATUS_CODE_ERROR'
ORDER BY t.duration_nano DESC
LIMIT 20;
Metrics join the same way, on any tag the tables share, such as service,
host, or pod.
Why You Might Use It
- You run Prometheus plus Loki or Elasticsearch and want one backend instead of three
- You have outgrown Prometheus on cardinality or retention and don't want the Thanos/Mimir operational surface
- You are hitting Loki's query performance limits as log volume grows
- You need long retention on object storage without a separate analytics stack
- You want to query telemetry with SQL, not only a domain query language
- You are storing GenAI or agent telemetry (OTel GenAI conventions) alongside infrastructure signals
Learn more in Why GreptimeDB.
What's Supported
| Ingest | OpenTelemetry (OTLP), Prometheus Remote Write, Loki Push, Elasticsearch Bulk, InfluxDB line protocol, gRPC |
| Query | SQL, PromQL, Jaeger-compatible trace queries, MySQL and PostgreSQL wire protocols |
| Storage | S3, GCS, Azure Blob and S3-compatible endpoints as primary storage, with memory and local-disk caches |
| Built in | Retention policies, downsampling, continuous aggregation, explicit table partitioning, and inverted / skipping / fulltext indexes |
Compute and storage are disaggregated: object storage holds the data, while memory and local-disk caches keep recent and frequently queried data close to compute.
Benchmarks
- Agent RCA Bench: LLM agents doing root cause analysis over GreptimeDB versus Prometheus + Loki + Tempo. 40% fewer wrong diagnoses, 48% fewer input tokens, 45% lower cost (write-up)
- GreptimeDB tops JSONBench's billion-record cold run test
- TSBS Benchmark
- More benchmark reports
Compatibility and Migration
Compatibility is per protocol, and query-side coverage is narrower than ingestion.
| Compatible | Not compatible | |
|---|---|---|
| Prometheus | Remote Write ingestion; PromQL queries | Gaps are listed in PromQL compatibility |
| Loki | Push ingestion; dual-write through Grafana Alloy makes the cutover gradual | LogQL and the rest of the Loki query API |
| Elasticsearch | _bulk ingestion in the open-source core; QueryDSL partially, in Enterprise |
Most other Elasticsearch APIs |
Limitations and Edition Boundary
Cluster deployment, object storage, the Flow engine, and every ingestion protocol listed above are in the Apache-2.0 build. Repartitioning, region migration, and index creation are manual operations there.
Read replicas, workload isolation, and automated repartitioning are GreptimeDB Enterprise features, along with enterprise security and governance. The Enterprise overview has the current list, and pricing has the edition comparison.
Architecture
GreptimeDB can run in two modes:
- Standalone — single binary for development and small deployments.
- Distributed — four components, each independently scalable:
- Frontend — protocol entry (OTel, Prometheus, MySQL/PostgreSQL, gRPC, ingestion APIs for Elasticsearch/InfluxDB/Loki) and the distributed query engine. Stateless, scales horizontally.
- Datanode — region engine with WAL, memtable, SST, cache, compaction, and indexes. Persists data to object storage. Elastic.
- Metasrv — metadata, routing, repartitioning, and security. Backed by a pluggable KV layer (etcd or RDS).
- Flownode (optional) — continuous flow computation (streaming and materialized views).
For deeper coverage, see the architecture doc or DeepWiki.
Try GreptimeDB
For AI agents — paste this prompt into your agent:
Read https://docs.greptime.com/SKILL.md and follow the instructions
to deploy, configure, ingest, and query GreptimeDB.
docker run -p 127.0.0.1:4000-4003:4000-4003 \
-v "$(pwd)/greptimedb_data:/greptimedb_data" \
--name greptime --rm \
greptime/greptimedb:latest standalone start \
--http-addr 0.0.0.0:4000 \
--grpc-bind-addr 0.0.0.0:4001 \
--mysql-addr 0.0.0.0:4002 \
--postgres-addr 0.0.0.0:4003
Dashboard: http://localhost:4000/dashboard
Read more in the full Install Guide.
Troubleshooting:
- Cannot connect to the database? Ensure that ports
4000,4001,4002, and4003are not blocked by a firewall or used by other services. - Failed to start? Check the container logs with
docker logs greptimefor further details.
Getting Started
Build From Source
Prerequisites:
- Rust toolchain — stable, pinned by
rust-toolchain.toml - Protobuf compiler (>= 3.15)
- C/C++ building essentials:
gcc/g++/autoconfand the glibc dev package (libc6-devon Ubuntu,glibc-develon Fedora) - Python toolchain (optional, only for some test scripts)
Build and run:
make # build greptime binary
cargo run -- standalone start # start in standalone mode
Common dev commands:
make fmt # format Rust code
make clippy # lint (fails on warnings)
make test # unit + integration tests (uses cargo-nextest)
make sqlness-test # SQL regression tests
See the Contribution Guidelines for the full developer workflow.
Tools & Extensions
- Kubernetes: GreptimeDB Operator
- Helm Charts: Greptime Helm Charts
- Dashboard: Web UI
- gRPC Ingester: Go, Java, C++, Erlang, Rust, .NET, TypeScript
- Grafana Data Source: GreptimeDB Grafana data source plugin
- Grafana Dashboard: Official Dashboard for monitoring
Project Status
GreptimeDB is generally available, with stable APIs and regular releases. It runs in production at scale — OceanBase Cloud operates 80+ GreptimeDB clusters managing 300 TB of logs, cutting log storage cost by 60%+ after migrating from Grafana Loki. See more in case studies.
Release lines and support windows are in the version reference. For where the project is going, read the v1.0 highlights and the 2026 roadmap.
Community
We invite you to engage and contribute!
If GreptimeDB is useful to you, please star the repo.
License
GreptimeDB is an open-core project. Its core is licensed under the Apache License 2.0.
A small set of peripheral, enterprise-only features are gated behind the
enterprise Cargo feature (not built by default) and are governed by the
separate GreptimeDB Enterprise License. Source files under
that license carry an explicit Enterprise License header.
Commercial Support
Scaling observability on your infrastructure? GreptimeDB Enterprise adds the operational, security, and support layer for production deployments. Contact us for details.
Contributing
- Read our Contribution Guidelines.
- Explore Internal Concepts and DeepWiki.
- Pick up a good first issue and join the #contributors Slack channel.
Acknowledgement
Special thanks to all contributors! See AUTHOR.md.
- Uses Apache Arrow™ (memory model)
- Apache Parquet™ (file storage)
- Apache DataFusion™ (query engine)
- Apache OpenDAL™ (data access abstraction)
All trademarks, logos, and brand names referenced in this README and in the Overview diagram are the property of their respective owners. Their use is for identification purposes only and does not imply endorsement or affiliation.