discord9
cdc7f3af6a
* fix(promql): collapse duplicate samples at one timestamp before range functions
A read path that does not deduplicate, such as an append-mode region, can
hand PromQL two rows for one series at one timestamp. Every range function
reads its samples from RangeManipulate, so the duplicate entries were
treated as independent samples: count_over_time counted both, idelta and
irate returned NULL because the last two entries shared a timestamp, and
delta/increase/rate deflated because the average sampling interval divides
the observed span by sample_count - 1.
Prometheus sample identity is one sample per series per timestamp, so its
range functions can never see this input. Restore that identity once, at
the operator every range function shares, instead of special-casing each
function's arithmetic.
The collapse compares native ticks, never the millisecond payload, so
distinct sub-millisecond samples that share a millisecond stay distinct as
calculate_range documents and tests. Batches without duplicate timestamps
take a single adjacency scan and are returned untouched; only when
duplicates exist is a take built, keeping tag and value columns aligned.
Keeping the last row of a group matches MergeMode::LastRow.
The normalize test that fed three rows at one timestamp now uses distinct
timestamps: it exercises histogram start-timestamp offsetting, and its
repeated timestamp was incidental, not asserted behavior.
Signed-off-by: discord9 <discord9@163.com>
* test(promql): cover duplicate samples end to end and keep the newer value
The operator now keeps the first row of a tied timestamp group, which is the row a
deduplicating read keeps: storage orders equal primary key and timestamp by sequence
descending, and FlatDedupReader takes the first row of each group. The end-to-end case
pins that choice by writing 100 and then 101 at the same timestamp: the window reports
increase 6, while keeping the stale 100 would report 8.
The sqlness case writes duplicate rows into an append_mode region, which is the read
path that does not deduplicate, and asserts every range function plus the unaffected
ordinary table in both the standalone and distributed environments.
Signed-off-by: discord9 <discord9@163.com>
* docs(promql): qualify duplicate-timestamp conflict selection
Signed-off-by: discord9 <discord9@163.com>
* perf(promql): avoid copying tags when collapsing duplicate samples
Signed-off-by: discord9 <discord9@163.com>
---------
Signed-off-by: discord9 <discord9@163.com>
(cherry picked from commit 01b0076f3e)
Metrics, logs, and traces.
One engine, on your infrastructure.
A columnar database for metrics, logs, and traces on object storage. Apache-2.0 licensed core.
User Guide · API Docs · Roadmap 2026 · Slack
stable for production · canary includes pre-releases · nightly is a weekly snapshot of main
Introduction
GreptimeDB is an open-source observability database. Metrics, logs, and traces run on one columnar engine over object storage and share one table model: tags, timestamp, and fields. When signals carry common identifiers such as service, host, or trace ID, you can correlate them in SQL without moving data between databases.
Ingest through OpenTelemetry, Prometheus Remote Write, Loki Push, or Elasticsearch Bulk. Use SQL across observability data and PromQL for metrics. Migrate ingestion one signal at a time without rebuilding your collectors.
One Query Across Signals
OpenTelemetry ingestion writes spans to opentelemetry_traces and log records to
opentelemetry_logs. Both tables carry trace_id, so correlating them is a join:
-- The slowest failed spans in the last hour,
-- with the log lines emitted inside those same traces.
SELECT
t.service_name,
t.span_name,
t.duration_nano / 1000000 AS duration_ms,
l.timestamp AS log_time,
l.severity_text,
l.body
FROM opentelemetry_traces t
JOIN opentelemetry_logs l ON l.trace_id = t.trace_id
WHERE t.timestamp > now() - INTERVAL '1' HOUR
AND t.span_status_code = 'STATUS_CODE_ERROR'
ORDER BY t.duration_nano DESC
LIMIT 20;
Metrics join the same way, on any tag the tables share, such as service,
host, or pod.
Why You Might Use It
- You run Prometheus plus Loki or Elasticsearch and want one backend instead of three
- You have outgrown Prometheus on cardinality or retention and don't want the Thanos/Mimir operational surface
- You are hitting Loki's query performance limits as log volume grows
- You need long retention on object storage without a separate analytics stack
- You want to query telemetry with SQL, not only a domain query language
- You are storing GenAI or agent telemetry (OTel GenAI conventions) alongside infrastructure signals
Learn more in Why GreptimeDB.
What's Supported
| Ingest | OpenTelemetry (OTLP), Prometheus Remote Write, Loki Push, Elasticsearch Bulk, InfluxDB line protocol, gRPC |
| Query | SQL, PromQL, Jaeger-compatible trace queries, MySQL and PostgreSQL wire protocols |
| Storage | S3, GCS, Azure Blob and S3-compatible endpoints as primary storage, with memory and local-disk caches |
| Built in | Retention policies, downsampling, continuous aggregation, explicit table partitioning, and inverted / skipping / fulltext indexes |
Compute and storage are disaggregated: object storage holds the data, while memory and local-disk caches keep recent and frequently queried data close to compute.
Benchmarks
- Agent RCA Bench: LLM agents doing root cause analysis over GreptimeDB versus Prometheus + Loki + Tempo. 40% fewer wrong diagnoses, 48% fewer input tokens, 45% lower cost (write-up)
- GreptimeDB tops JSONBench's billion-record cold run test
- TSBS Benchmark
- More benchmark reports
Compatibility and Migration
Compatibility is per protocol, and query-side coverage is narrower than ingestion.
| Compatible | Not compatible | |
|---|---|---|
| Prometheus | Remote Write ingestion; PromQL queries | Gaps are listed in PromQL compatibility |
| Loki | Push ingestion; dual-write through Grafana Alloy makes the cutover gradual | LogQL and the rest of the Loki query API |
| Elasticsearch | _bulk ingestion in the open-source core; QueryDSL partially, in Enterprise |
Most other Elasticsearch APIs |
Limitations and Edition Boundary
Cluster deployment, object storage, the Flow engine, and every ingestion protocol listed above are in the Apache-2.0 build. Repartitioning, region migration, and index creation are manual operations there.
Read replicas, workload isolation, and automated repartitioning are GreptimeDB Enterprise features, along with enterprise security and governance. The Enterprise overview has the current list, and pricing has the edition comparison.
Architecture
GreptimeDB can run in two modes:
- Standalone — single binary for development and small deployments.
- Distributed — four components, each independently scalable:
- Frontend — protocol entry (OTel, Prometheus, MySQL/PostgreSQL, gRPC, ingestion APIs for Elasticsearch/InfluxDB/Loki) and the distributed query engine. Stateless, scales horizontally.
- Datanode — region engine with WAL, memtable, SST, cache, compaction, and indexes. Persists data to object storage. Elastic.
- Metasrv — metadata, routing, repartitioning, and security. Backed by a pluggable KV layer (etcd or RDS).
- Flownode (optional) — continuous flow computation (streaming and materialized views).
For deeper coverage, see the architecture doc or DeepWiki.
Try GreptimeDB
For AI agents — paste this prompt into your agent:
Read https://docs.greptime.com/SKILL.md and follow the instructions
to deploy, configure, ingest, and query GreptimeDB.
docker run -p 127.0.0.1:4000-4003:4000-4003 \
-v "$(pwd)/greptimedb_data:/greptimedb_data" \
--name greptime --rm \
greptime/greptimedb:latest standalone start \
--http-addr 0.0.0.0:4000 \
--grpc-bind-addr 0.0.0.0:4001 \
--mysql-addr 0.0.0.0:4002 \
--postgres-addr 0.0.0.0:4003
Dashboard: http://localhost:4000/dashboard
Read more in the full Install Guide.
Troubleshooting:
- Cannot connect to the database? Ensure that ports
4000,4001,4002, and4003are not blocked by a firewall or used by other services. - Failed to start? Check the container logs with
docker logs greptimefor further details.
Getting Started
Build From Source
Prerequisites:
- Rust toolchain — stable, pinned by
rust-toolchain.toml - Protobuf compiler (>= 3.15)
- C/C++ building essentials:
gcc/g++/autoconfand the glibc dev package (libc6-devon Ubuntu,glibc-develon Fedora) - Python toolchain (optional, only for some test scripts)
Build and run:
make # build greptime binary
cargo run -- standalone start # start in standalone mode
Common dev commands:
make fmt # format Rust code
make clippy # lint (fails on warnings)
make test # unit + integration tests (uses cargo-nextest)
make sqlness-test # SQL regression tests
See the Contribution Guidelines for the full developer workflow.
Tools & Extensions
- Kubernetes: GreptimeDB Operator
- Helm Charts: Greptime Helm Charts
- Dashboard: Web UI
- gRPC Ingester: Go, Java, C++, Erlang, Rust, .NET, TypeScript
- Grafana Data Source: GreptimeDB Grafana data source plugin
- Grafana Dashboard: Official Dashboard for monitoring
Project Status
GreptimeDB is generally available, with stable APIs and regular releases. It runs in production at scale — OceanBase Cloud operates 80+ GreptimeDB clusters managing 300 TB of logs, cutting log storage cost by 60%+ after migrating from Grafana Loki. See more in case studies.
Release lines and support windows are in the version reference. For where the project is going, read the v1.0 highlights and the 2026 roadmap.
Community
We invite you to engage and contribute!
If GreptimeDB is useful to you, please star the repo.
License
GreptimeDB is an open-core project. Its core is licensed under the Apache License 2.0.
A small set of peripheral, enterprise-only features are gated behind the
enterprise Cargo feature (not built by default) and are governed by the
separate GreptimeDB Enterprise License. Source files under
that license carry an explicit Enterprise License header.
Commercial Support
Scaling observability on your infrastructure? GreptimeDB Enterprise adds the operational, security, and support layer for production deployments. Contact us for details.
Contributing
- Read our Contribution Guidelines.
- Explore Internal Concepts and DeepWiki.
- Pick up a good first issue and join the #contributors Slack channel.
Acknowledgement
Special thanks to all contributors! See AUTHOR.md.
- Uses Apache Arrow™ (memory model)
- Apache Parquet™ (file storage)
- Apache DataFusion™ (query engine)
- Apache OpenDAL™ (data access abstraction)
All trademarks, logos, and brand names referenced in this README and in the Overview diagram are the property of their respective owners. Their use is for identification purposes only and does not imply endorsement or affiliation.