## Problem
The client code for `tenant-set-preferred-az` declared response type
`()`, so printed a spurious error on each use:
```
Error: receive body: error decoding response body: invalid type: map, expected unit at line 1 column 0
```
The requests were successful anyway.
## Summary of changes
- Declare the proper return type, so that the command succeeds quietly.
## Problem
Follow-up of the incident, we should not use the same bound on
lower/upper limit of compaction files. This patch adds an upper bound
limit, which is set to 50 for now.
## Summary of changes
Add `compaction_upper_limit`.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
Co-authored-by: Christian Schwarz <christian@neon.tech>
## Problem
We need a setting to disable the flush upload wait, to test L0 flush
backpressure in staging.
## Summary of changes
Add `l0_flush_wait_upload` setting.
## Problem
From time to time, folks discover our `control_plane/` folder and make
the (reasonable) mistake of thinking it's a tool for running full-sized
Neon systems, whereas in reality it is a tool for dev/test.
## Summary of changes
- Change control_plane's readme title to "Local Development Control
Plane (`neon_local`)`
- Change "Running local installation" to "Running a local development
environment" in the main readme
## Problem
There is no direct backpressure for compaction and L0 read
amplification. This allows a large buildup of compaction debt and read
amplification.
Resolves#5415.
Requires #10402.
## Summary of changes
Delay layer flushes based on the number of level 0 delta layers:
* `l0_flush_delay_threshold`: delay flushes such that they take 2x as
long (default `2 * compaction_threshold`).
* `l0_flush_stall_threshold`: stall flushes until level 0 delta layers
drop below threshold (default `4 * compaction_threshold`).
If either threshold is reached, ephemeral layer rolls also synchronously
wait for layer flushes to propagate this backpressure up into WAL
ingestion. This will bound the number of frozen layers to 1 once
backpressure kicks in, since all other frozen layers must flush before
the rolled layer.
## Analysis
This will significantly change the compute backpressure characteristics.
Recall the three compute backpressure knobs:
* `max_replication_write_lag`: 500 MB (based on Pageserver
`last_received_lsn`).
* `max_replication_flush_lag`: 10 GB (based on Pageserver
`disk_consistent_lsn`).
* `max_replication_apply_lag`: disabled (based on Pageserver
`remote_consistent_lsn`).
Previously, the Pageserver would keep ingesting WAL and build up
ephemeral layers and L0 layers until the compute hit
`max_replication_flush_lag` at 10 GB and began backpressuring. Now, once
we delay/stall WAL ingestion, the compute will begin backpressuring
after `max_replication_write_lag`, i.e. 500 MB. This is probably a good
thing (we're not building up a ton of compaction debt), but we should
consider tuning these settings.
`max_replication_flush_lag` probably doesn't serve a purpose anymore,
and we should consider removing it.
Furthermore, the removal of the upload barrier in #10402 will mean that
we no longer backpressure flushes based on S3 uploads, since
`max_replication_apply_lag` is disabled. We should consider enabling
this as well.
### When and what do we compact?
Default compaction settings:
* `compaction_threshold`: 10 L0 delta layers.
* `compaction_period`: 20 seconds (between each compaction loop check).
* `checkpoint_distance`: 256 MB (size of L0 delta layers).
* `l0_flush_delay_threshold`: 20 L0 delta layers.
* `l0_flush_stall_threshold`: 40 L0 delta layers.
Compaction characteristics:
* Minimum compaction volume: 10 layers * 256 MB = 2.5 GB.
* Additional compaction volume (assuming 128 MB/s WAL): 128 MB/s * 20
seconds = 2.5 GB (10 L0 layers).
* Required compaction bandwidth: 5.0 GB / 20 seconds = 256 MB/s.
### When do we hit `max_replication_write_lag`?
Depending on how fast compaction and flushes happens, the compute will
backpressure somewhere between `l0_flush_delay_threshold` or
`l0_flush_stall_threshold` + `max_replication_write_lag`.
* Minimum compute backpressure lag: 20 layers * 256 MB + 500 MB = 5.6 GB
* Maximum compute backpressure lag: 40 layers * 256 MB + 500 MB = 10.0
GB
This seems like a reasonable range to me.
Drop logical replication subscribers
before compute starts on a non-main branch.
Add new compute_ctl spec flag: drop_subscriptions_before_start
If it is set, drop all the subscriptions from the compute node
before it starts.
To avoid race on compute start, use new GUC
neon.disable_logical_replication_subscribers
to temporarily disable logical replication workers until we drop the
subscriptions.
Ensure that we drop subscriptions exactly once when endpoint starts on a
new branch.
It is essential, because otherwise, we may drop not only inherited, but
newly created subscriptions.
We cannot rely only on spec.drop_subscriptions_before_start flag,
because if for some reason compute restarts inside VM,
it will start again with the same spec and flag value.
To handle this, we save the fact of the operation in the database
in the neon.drop_subscriptions_done table.
If the table does not exist, we assume that the operation was never
performed, so we must do it.
If table exists, we check if the operation was performed on the current
timeline.
fixes: https://github.com/neondatabase/neon/issues/8790
## Problem
part of https://github.com/neondatabase/neon/issues/9114
The automatic trigger is already implemented at
https://github.com/neondatabase/neon/pull/10221 but I need to write some
tests and finish my experiments in staging before I can merge it with
confidence. Given that I have some other patches that will modify the
config items, I'd like to get the config items merged first to reduce
conflicts.
## Summary of changes
* add `l2_lsn` to index_part.json -- below that LSN, data have been
processed by gc-compaction
* add a set of gc-compaction auto trigger control items into the config
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
Rename the safekeeper scheduling policy "disabled" to "pause".
A rename was requested in
https://github.com/neondatabase/neon/pull/10400#discussion_r1916259124,
as the "disabled" policy is meant to be analogous to the "pause" policy
for pageservers.
Also simplify the `SkSchedulingPolicyArg::from_str` function, relying on
the `from_str` implementation of `SkSchedulingPolicy`. Latter is used
for the database format as well, so it is quite stable. If we ever want
to change the UI, we'll need to duplicate the function again but this is
cheap.
Implementing the last missing endpoint of #9981, this adds support to
set the scheduling policy of an individual safekeeper, as specified in
the RFC. However, unlike in the RFC we call the endpoint
`scheduling_policy` not `status`
Closes#9981.
As for why not use the upsert endpoint for this: we want to have the
safekeeper upsert endpoint be used for testing and for deploying new
safekeepers, but not for changes of the scheduling policy. We don't want
to change any of the other fields when marking a safekeeper as
decommissioned for example, so we'd have to first fetch them only to
then specify them again. Of course one can also design an endpoint where
one can omit any field and it doesn't get modified, but it's still not
great for observability to put everything into one big "change something
about this safekeeper" endpoint.
## Problem
For large deployments, the `control/v1/tenant` listing API can time out
transmitting a monolithic serialized response.
## Summary of changes
- Add `limit` and `start_after` parameters to listing API
- Update storcon_cli to use these parameters and limit requests to 1000
items at a time
## Problem
Since https://github.com/neondatabase/neon/pull/9916, the preferred AZ
of a tenant is much more impactful, and we would like to make it more
visible in tooling.
## Summary of changes
- Include AZ in node describe API
- Include AZ info in node & tenant outputs in CLI
- Add metrics for per-node shard counts, labelled by AZ
- Add a CLI for setting preferred AZ on a tenant
- Extend AZ-setting API+CLI to handle None for clearing preferred AZ
## Problem
Currently, if we want to move a secondary there isn't a neat way to do
that: we just have migration API for the attached location, and it is
only clean to use that if you've manually created a secondary via
pageserver API in the place you're going to move it to.
Secondary migration API enables:
- Moving the secondary somewhere because we would like to later move the
attached location there.
- Move the secondary location because we just want to reclaim some disk
space from its current location.
## Summary of changes
- Add `/migrate_secondary` API
- Add `tenant-shard-migrate-secondary` CLI
- Add tests for above
With a new beta build of the rust compiler, it's good to check out the
new lints. Either to find false positives, or find flaws in our code.
Additionally, it helps reduce the effort required to update to 1.85 in 6
weeks.
This is a refactor to create better abstractions related to our
management server. It cleans up the code, and prepares everything for
authorized communication to and from the control plane.
Signed-off-by: Tristan Partin <tristan@neon.tech>
ref neondatabase/cloud#21731
## Problem
When we manually override the LFC size for particular computes,
autoscaling will typically undo that because vm-monitor will resize LFC
itself.
So, we'd like a way to make vm-monitor not set LFC size — this actually
already exists, if we just don't give vm-monitor a postgres connection
string.
## Summary of changes
Add a new field to the compute spec, `disable_lfc_resizing`. When set to
`true`, we pass in `None` for its postgres connection string. That
matches the configuration tested in `neondatabase/autoscaling` CI.
## Problem
Currently default value of storage controller heartbeat interval is
100msec. It means that 10 times per second it establish connection to
PS. And it seems to be quite expensive.
At MacOS right now storage_controller consumes 70% CPU and trusts - 30%.
So together they completely utilize one core.
A lot of us has Macs. Let's save environment a little bit and do not
waste electricity and contribute to global warming.
By the way, on prod we have interval 10seconds
## Summary of changes
Increase heartbeat interval from 100msec to 1 second.
Co-authored-by: Konstantin Knizhnik <knizhnik@neon.tech>
## Problem
`test_pgdata_import_smoke` writes two gigabytes of pages and then reads
them back serially. This is CPU bottlenecked and results in a long
runtime, and sensitivity to CPU load from other tests on the same
machine.
Closes: https://github.com/neondatabase/neon/issues/10071
## Summary of changes
- Use effective_io_concurrency=32 when doing sequential scans through
2GiB of pages in test_pgdata_import_smoke. This is a ~10x runtime
decrease in the parts of the test that do sequential scans.
- Also set `effective_io_concurrency=2` for tests, as I noticed while
debugging that we were doing all getpage requests serially, which is bad
for checking the stability of the batching code.
## Problem
`neon_local` has always been unsafe to run concurrently with itself: it
uses simple text files for persistent state, and concurrent runs will
step on each other.
In some test environments we intentionally handle this with mutexes in
python land, but it's fragile to try and always remember to do that.
## Summary of changes
- Add a `flock` based mutex around the `main` function of neon_local,
using the repo directory as the file to lock
- Clean up an Option<> around control_plane_api, this is a drive-by
change because it was one of the fields that had a weird effect when
previous concurrent stuff stamped on it.
Add a `safekeepers` subcommand to `storcon_cli` that allows listing the
safekeepers.
```
$ curl -X POST --url http://localhost:1234/control/v1/safekeeper/42 --data \
'{"active":true, "id":42, "created_at":"2023-10-25T09:11:25Z", "updated_at":"2024-08-28T11:32:43Z","region_id":"neon_local","host":"localhost","port":5454,"http_port":0,"version":123,"availability_zone_id":"us-east-2b"}'
$ cargo run --bin storcon_cli -- --api http://localhost:1234 safekeepers
Finished `dev` profile [unoptimized + debuginfo] target(s) in 0.38s
Running `target/debug/storcon_cli --api 'http://localhost:1234' safekeepers`
+----+---------+-----------+------+-----------+------------+
| Id | Version | Host | Port | Http Port | AZ Id |
+==========================================================+
| 42 | 123 | localhost | 5454 | 0 | us-east-2b |
+----+---------+-----------+------+-----------+------------+
```
Also:
* Don't return the raw `SafekeeperPersistence` struct that contains the
raw database presentation, but instead a new
`SafekeeperDescribeResponse` struct.
* The `SafekeeperPersistence` struct leaves out the `active` field on
purpose because we want to deprecate it and replace it with a
`scheduling_policy` one.
Part of https://github.com/neondatabase/neon/issues/9981
## Problem
CI currently uses static credentials in some places. These are less
secure and hard to maintain, so we are going to deprecate them and use
OIDC auth.
## Summary of changes
- ci(fix): Use OIDC auth to upload artifact on s3
- ci(fix): Use OIDC auth to login on ECR
## Problem
Cplane and storage controller tenant config changes are not additive.
Any change overrides all existing tenant configs. This would be fine if
both did client side patching, but that's not the case.
Once this merges, we must update cplane to use the PATCH endpoint.
## Summary of changes
### High Level
Allow for patching of tenant configuration with a `PATCH
/v1/tenant/config` endpoint.
It takes the same data as it's PUT counterpart. For example the payload
below will update `gc_period` and unset `compaction_period`. All other
fields are left in their original state.
```
{
"tenant_id": "1234",
"gc_period": "10s",
"compaction_period": null
}
```
### Low Level
* PS and storcon gain `PATCH /v1/tenant/config` endpoints. PS endpoint
is only used for cplane managed instances.
* `storcon_cli` is updated to have separate commands for
`set-tenant-config` and `patch-tenant-config`
Related https://github.com/neondatabase/cloud/issues/21043
## Problem
We need a higher concurrency during reconfiguration in case of many DBs,
but the instance is already running and used by the client. We can
easily get out of `max_connections` limit, and the current code won't
handle that.
## Summary of changes
Default to 1, but also allow control plane to override this value for
specific projects. It's also recommended to bump
`superuser_reserved_connections` += `reconfigure_concurrency` for such
projects to ensure that we always have enough spare connections for
reconfiguration process to succeed.
Quick workaround for neondatabase/cloud#17846
## Problem
Reqwest errors don't include details about the inner source error. This
means that we get opaque errors like:
```
receive body: error sending request for url (http://localhost:9898/v1/location_config)
```
Instead of the more helpful:
```
receive body: error sending request for url (http://localhost:9898/v1/location_config): operation timed out
```
Touches #9801.
## Summary of changes
Include the source error for `reqwest::Error` wherever it's displayed.
Before this PR, the storcon_cli didn't have a way to show the
tenant-wide information of the TenantDescribeResponse.
Sadly, the `Serialize` impl for the tenant config doesn't skip on
`None`, so, the output becomes a bit bloated.
Maybe we can use `skip_serializing_if(Option::is_none)` in the future.
=> https://github.com/neondatabase/neon/issues/9983
## Problem
After enabling LFC in tests and lowering `shared_buffers` we started
having more problems with `test_pg_regress`.
## Summary of changes
Set `shared_buffers` to 1MB to both exercise getPage requests/LFC, and
still have enough room for Postgres to operate. Everything smaller might
be not enough for Postgres under load, and can cause errors like 'no
unpinned buffers available'.
See Konstantin's comment [1] as well.
Fixes#9956
[1]:
https://github.com/neondatabase/neon/issues/9956#issuecomment-2511608097
Co-authored-by: Heikki Linnakangas <heikki@neon.tech>
Co-authored-by: Stas Kelvic <stas@neon.tech>
# Context
This PR contains PoC-level changes for a product feature that allows
onboarding large databases into Neon without going through the regular
data path.
# Changes
This internal RFC provides all the context
* https://github.com/neondatabase/cloud/pull/19799
In the language of the RFC, this PR covers
* the Importer code (`fast_import`)
* all the Pageserver changes (mgmt API changes, flow implementation,
etc)
* a basic test for the Pageserver changes
# Reviewing
As acknowledged in the RFC, the code added in this PR is not ready for
general availability.
Also, the **architecture is not to be discussed in this PR**, but in the
RFC and associated Slack channel instead.
Reviewers of this PR should take that into consideration.
The quality bar to apply during review depends on what area of the code
is being reviewed:
* Importer code (`fast_import`): practically anything goes
* Core flow (`flow.rs`):
* Malicious input data must be expected and the existing threat models
apply.
* The code must not be safe to execute on *dedicated* Pageserver
instances:
* This means in particular that tenants *on other* Pageserver instances
must not be affected negatively wrt data confidentiality, integrity or
availability.
* Other code: the usual quality bar
* Pay special attention to correct use of gate guards, timeline
cancellation in all places during shutdown & migration, etc.
* Consider the broader system impact; if you find potentially
problematic interactions with Storage features that were not covered in
the RFC, bring that up during the review.
I recommend submitting three separate reviews, for the three high-level
areas with different quality bars.
# References
(Internal-only)
* refs https://github.com/neondatabase/cloud/issues/17507
* refs https://github.com/neondatabase/company_projects/issues/293
* refs https://github.com/neondatabase/company_projects/issues/309
* refs https://github.com/neondatabase/cloud/issues/20646
---------
Co-authored-by: Stas Kelvich <stas.kelvich@gmail.com>
Co-authored-by: Heikki Linnakangas <heikki@neon.tech>
Co-authored-by: John Spray <john@neon.tech>
## Problem
In test environments, the `syncfs` that the pageserver does on startup
can take a long time, as other tests running concurrently might have
many gigabytes of dirty pages.
## Summary of changes
- Add a `no_sync` option to the pageserver's config.
- Skip syncfs on startup if this is set
- A subsequent PR (https://github.com/neondatabase/neon/pull/9678) will
enable this by default in tests. We need to wait until after the next
release to avoid breaking compat tests, which would fail if we set
no_sync & use an old pageserver binary.
Q: Why is this a different mechanism than safekeeper, which as a
--no-sync CLI?
A: Because the way we manage pageservers in neon_local depends on the
pageserver.toml containing the full configuration, whereas safekeepers
have a config file which is neon-local-specific and can drive a CLI
flag.
Q: Why is the option no_sync rather than sync?
A: For boolean configs with a dangerous value, it's preferable to make
"false" the safe option, so that any downstream future config tooling
that might have a "booleans are false by default" behavior (e.g. golang
structs) is safe by default.
Q: Why only skip the syncfs, and not all fsyncs?
A: Skipping all fsyncs would require more code changes, and the most
acute problem isn't fsyncs themselves (these just slow down a running
test), it's the syncfs (which makes a pageserver startup slow as a
result of _other_ tests)
Since 5f83c9290b482dc90006c400dfc68e85a17af785/#1504 we've had
duplication in construction of models::TenantConfig, where both
constructs contained the same code. This PR removes one of the two
locations to avoid the duplication.
## Problem
Part of https://github.com/neondatabase/neon/issues/8623
## Summary of changes
Removed all aux-v1 config processing code. Note that we persisted it
into the index part file, so we cannot really remove the field from
index part. I also kept the config item within the tenant config, but we
will not read it any more.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
## Problem
If something goes wrong with a live migration, we currently only have
awkward ways to interrupt that:
- Restart the storage controller
- Ask it to do some other modification/migration on the shard, which we
don't really want.
## Summary of changes
- Add a new `/cancel` control API, and storcon_cli wrapper for it, which
fires the Reconciler's cancellation token. This is just for on-call use
and we do not expect it to be used by any other services.
# Problem
Timeline creation can either be bootstrap or branch.
The distinction is made based on whether the `ancestor_*` fields are
present or not.
In the PGDATA import code
(https://github.com/neondatabase/neon/pull/9218), I add a third variant
to timeline creation.
# Solution
The above pushed me to refactor the code in Pageserver to distinguish
the different creation requests through enum variants.
There is no externally observable effect from this change.
On the implementation level, a notable change is that the acquisition of
the `TimelineCreationGuard` happens later than before. This is necessary
so that we have everything in place to construct the
`CreateTimelineIdempotency`. Notably, this moves the acquisition of the
creation guard _after_ the acquisition of the `gc_cs` lock in the case
of branching. This might appear as if we're at risk of holding `gc_cs`
longer than before this PR, but, even before this PR, we were holding
`gc_cs` until after the `wait_completion()` that makes the timeline
creation durable in S3 returns. I don't see any deadlock risk with
reversing the lock acquisition order.
As a drive-by change, I found that the `create_timeline()` function in
`neon_local` is unused, so I removed it.
# Refs
* platform context: https://github.com/neondatabase/neon/pull/9218
* product context: https://github.com/neondatabase/cloud/issues/17507
* next PR stacked atop this one:
https://github.com/neondatabase/neon/pull/9501
## Problem
Occasionally, we get failures to start the storage controller's db with
errors like:
```
aborting due to panic at /__w/neon/neon/control_plane/src/background_process.rs:349:67:
claim pid file: lock file
Caused by:
file is already locked
```
e.g.
https://neon-github-public-dev.s3.amazonaws.com/reports/pr-9428/11380574562/index.html#/testresult/1c68d413ea9ecd4a
This is happening in a stop,start cycle during a test. Presumably the
pidfile from the startup background process is still held at the point
we stop, because we let pg_ctl keep running in the background.
## Summary of changes
- Refactor pg_ctl invocations into a helper
- In the controller's `start` function, use pg_ctl & a wait loop for
pg_isready, instead of using background_process
---------
Co-authored-by: Arpad Müller <arpad-m@users.noreply.github.com>
Adds a test for the (now fixed) storage broker limit issue, see #9268
for the description and #9299 for the fix.
Also fix a race condition with endpoint creation/starts running in parallel,
leading to file not found errors.
1. Adds local-proxy to compute image and vm spec
2. Updates local-proxy config processing, writing PID to a file eagerly
3. Updates compute-ctl to understand local proxy compute spec and to
send SIGHUP to local-proxy over that pid.
closes https://github.com/neondatabase/cloud/issues/16867
Follow-up of #9234 to give hyper 1.0 the version-free name, and the
legacy version of hyper the one with the version number inside. As we
move away from hyper 0.14, we can remove the `hyper0` name piece by
piece.
Part of #9255
## Problem
We don't have an alert for long running reconciles. Stuck reconciles are
problematic
as we've seen in a recent incident.
## Summary of changes
Add a new metric `storage_controller_reconcile_long_running_total` with
labels: `{tenant_id, shard_number, seq}`.
The metric is removed after the long running reconcile finishes. These
events should be rare, so we won't break
the bank on cardinality.
Related https://github.com/neondatabase/neon/issues/9150
Part of https://github.com/neondatabase/cloud/issues/13127. Resolves
#9153
What changed in this PR:
1. Adds `ComputeSpec.disk_quota_bytes: Option<u64>`
2. Adds new arg to compute_ctl: `--set-disk-quota-for-fs <mountpoint>`
3. Implements running `/neonvm/bin/set-disk-quota` with the right value
if both cmdline arg AND field in the spec are specified
4. Patches `/etc/sudoers.d` to allow `compute_ctl` to set quota with
sudo
This PR is very similar to the swap support added earlier, you can take
a look at it as prior art: #7434
In theory, it can be implemented outside of compute_ctl when we will
have a separate neonvm daemon, but we are not there yet. Current
implementation is the simplest possible to unblock computes with larger
disks.
All code related to usage of `/neonvm/bin/set-disk-quota` is located in
`disk_quota.rs`. We need to call this script with the following
arguments: `/neonvm/bin/set-disk-quota {size_kb} {mountpoint}`. Quotas
are set on the filesystem level, so we need to provide path to the
directory that filesystem was mounted to.
I tested this change locally with
https://github.com/neondatabase/cloud/pull/17270. It should be safe to
merge, because this feature is gated by both cmdline arg and field in
the spec. If control-plane doesn't set values in both places,
compute_ctl won't be affected by this change.
Part of #7497, closes#8817.
## Problem
See #8817.
## Summary of changes
**compute_ctl**
- Renew lsn lease as soon as `/configure` updates pageserver_connstr,
use `state_changed` Condvar for synchronization.
**pageserver**
As mentioned in
https://github.com/neondatabase/neon/issues/8817#issuecomment-2315768076,
we still want some permanent error reported if a lease cannot be
granted. By considering attachment mode and the added
`lsn_lease_deadline` when processing lease requests, we can also bound
the case of bad requests to a very short period after migration/restart.
- Refactor https://github.com/neondatabase/neon/pull/9024 and move
`lsn_lease_deadline` to `AttachedTenantConf` so timeline can easily
access it.
- Have separate HTTP `init_lsn_lease` and libpq `renew_lsn_lease` API.
- Always do LSN verification for the initial HTTP lease request.
- LSN verification for the renewal is **still done** when tenants are
not in `AttachedSingle` and we have pass the `lsn_lease_deadline`, which
give plenty of time for compute to renew the lease.
**neon_local**
- add and call `timeline_init_lsn_lease` mgmt_api at static endpoint
start. The initial lsn lease http request is sent when we run `cargo
neon endpoint start <static endpoint>`.
## Testing
- Extend `test_readonly_node_gc` to do pageserver restarts and
migration.
## Future Work
- The control plane should make the initial lease request through HTTP
when creating a static endpoint. This is currently only done in
`neon_local`.
Signed-off-by: Yuchen Liang <yuchen@neon.tech>
Verbosity in this case is good when reading the code. Short options are
better when operating in an interactive shell.
Signed-off-by: Tristan Partin <tristan@neon.tech>
## Problem
Storage controller didn't previously consider AZ locality between
compute and pageservers
when scheduling nodes. Control plane has this feature, and, since we are
migrating tenants
away from it, we need feature parity to avoid perf degradations.
## Summary of changes
The change itself is fairly simple:
1. Thread az info into the scheduler
2. Add an extra member to the scheduling scores
Step (2) deserves some more discussion. Let's break it down by the shard
type being scheduled:
**Attached Shards**
We wish for attached shards of a tenant to end up in the preferred AZ of
the tenant since that
is where the compute is like to be.
The AZ member for `NodeAttachmentSchedulingScore` has been placed
below the affinity score (so it's got the second biggest weight for
picking the node). The rationale for going
below the affinity score is to avoid having all shards of a single
tenant placed on the same node in 2 node
regions, since that would mean that one tenant can drive the general
workload of an entire pageserver.
I'm not 100% sure this is the right decision, so open to discussing
hoisting the AZ up to first place.
**Secondary Shards**
We wish for secondary shards of a tenant to be scheduled in a different
AZ from the preferred one
for HA purposes.
The AZ member for `NodeSecondarySchedulingScore` has been placed first,
so nodes in different AZs
from the preferred one will always be considered first. On small
clusters, this can mean that all the secondaries
of a tenant are scheduled to the same pageserver, but secondaries don't
use up as many resources as the
attached location, so IMO the argument made for attached shards doesn't
hold.
Related: https://github.com/neondatabase/neon/issues/8848
