- Remove a few obsolete "allowed error messages" from tests. The
pageserver doesn't emit those messages anymore.
- Remove misplaced and outdated docstring comment from
`test_tenants.py`. A docstring is supposed to be the first thing in a
function, but we had added some code before it. And it was outdated, as
we haven't supported running without safekeepers for a long time.
- Fix misc typos in comments
- Remove obsolete comment about backwards compatibility with safekeepers
without `TIMELINE_STATUS` API. All safekeepers have it by now.
## Problem
This is a prerequisite for neondatabase/neon#12575 to keep all things
relevant to `build-tools` image in a single directory
## Summary of changes
- Rename `build_tools/` to `build-tools/`
- Move `build-tools.Dockerfile` to `build-tools/Dockerfile`
# TLDR
This PR is a no-op.
## Problem
When a SK loses a disk, it must recover all WALs from the very
beginning. This may take days/weeks to catch up to the latest WALs for
all timelines it owns.
## Summary of changes
When SK starts up,
if it finds that it has 0 timelines,
- it will ask SC for the timeline it owns.
- Then, pulls the timeline from its peer safekeepers to restore the WAL
redundancy right away.
After pulling timeline is complete, it will become active and accepts
new WALs.
The current impl is a prototype. We can optimize the impl further, e.g.,
parallel pull timelines.
---------
Co-authored-by: Haoyu Huang <haoyu.huang@databricks.com>
https://github.com/neondatabase/cloud/issues/19011
Measure relative performance for prewarmed and non-prewarmed endpoints.
Add test that runs on every commit, and one performance test with a
remote cluster.
## Problem
In https://github.com/neondatabase/neon/pull/12513, the new code was
implemented to retry 404 errors caused by the replication lag. However,
this implemented the new logic, making the script more complicated,
while we have an existing one in `neon_api.py`.
## Summary of changes
The existing mechanism is used to retry 404 errors.
---------
Co-authored-by: Alexey Masterov <alexey.masterov@databricks.com>
## Problem
We don't validate the validity of the `new_sk_set` before starting the
migration. It is validated later, so the migration to an invalid
safekeeper set will fail anyway. But at this point we might already
commited an invalid `new_sk_set` to the database and there is no `abort`
command yet (I ran into this issue in neon_local and ruined the timeline
:)
- Part of https://github.com/neondatabase/neon/issues/11669
## Summary of changes
- Add safekeeper count and safekeeper duplication checks before starting
the migration
- Test that we validate the `new_sk_set` before starting the migration
- Add `force` option to the `TimelineSafekeeperMigrateRequest` to
disable not-mandatory checks
# TLDR
Problem-I is a bug fix. The rest are no-ops.
## Problem I
Page server checks image layer creation based on the elapsed time but
this check depends on the current logical size, which is only computed
on shard 0. Thus, for non-0 shards, the check will be ineffective and
image creation will never be done for idle tenants.
## Summary of changes I
This PR fixes the problem by simply removing the dependency on current
logical size.
## Summary of changes II
This PR adds a timeout when calling page server to split shard to make
sure SC does not wait for the API call forever. Currently the PR doesn't
adds any retry logic because it's not clear whether page server shard
split can be safely retried if the existing operation is still ongoing
or left the storage in a bad state. Thus it's better to abort the whole
operation and restart.
## Problem III
`test_remote_failures` requires PS to be compiled in the testing mode.
For PS in dev/staging, they are compiled without this mode.
## Summary of changes III
Remove the restriction and also increase the number of total failures
allowed.
## Summary of changes IV
remove test on PS getpage http route.
---------
Co-authored-by: Chen Luo <chen.luo@databricks.com>
Co-authored-by: Yecheng Yang <carlton.yang@databricks.com>
Co-authored-by: Vlad Lazar <vlad@neon.tech>
This is a no-op for the neon deployment
* Introduce the concept image consistent lsn: of the largest LSN below
which all pages have been redone successfully
* Use the image consistent LSN for forced image layer creations
* Optionally expose the image consistent LSN via the timeline describe
HTTP endpoint
* Add a sharded timeline describe endpoint to storcon
---------
Co-authored-by: Chen Luo <chen.luo@databricks.com>
## Problem
Sometimes we run out of free ports in `PortDistributor`. This affects
particularly failed tests that we rerun automatically up to 3 times
(which makes it use up to 3x more ports)
## Summary of changes
- Cycle over the range of ports to reuse freed ports from previous tests
Ref: LKB-62
# TLDR
All changes are no-op except some metrics.
## Summary of changes I
### Pageserver
Added a new global counter metric
`pageserver_pagestream_handler_results_total` that categorizes
pagestream request results according to their outcomes:
1. Success
2. Internal errors
3. Other errors
Internal errors include:
1. Page reconstruction error: This probably indicates a pageserver
bug/corruption
2. LSN timeout error: Could indicate overload or bugs with PS's ability
to reach other components
3. Misrouted request error: Indicates bugs in the Storage Controller/HCC
Other errors include transient errors that are expected during normal
operation or errors indicating bugs with other parts of the system
(e.g., malformed requests, errors due to cancelled operations during PS
shutdown, etc.)
## Summary of changes II
This PR adds a pageserver endpoint and its counterpart in storage
controller to list visible size of all tenant shards. This will be a
prerequisite of the tenant rebalance command.
## Problem III
We need a way to download WAL
segments/layerfiles from S3 and replay WAL records. We cannot access
production S3 from our laptops directly, and we also can't transfer any
user data out of production systems for GDPR compliance, so we need
solutions.
## Summary of changes III
This PR adds a couple of tools to support the debugging
workflow in production:
1. A new `pagectl download-remote-object` command that can be used to
download remote storage objects assuming the correct access is set up.
## Summary of changes IV
This PR adds a command to list all visible delta and image layers from
index_part. This is useful to debug compaction issues as index_part
often contain a lot of covered layers due to PITR.
---------
Co-authored-by: William Huang <william.huang@databricks.com>
Co-authored-by: Chen Luo <chen.luo@databricks.com>
Co-authored-by: Vlad Lazar <vlad@neon.tech>
## Problem
Safekeeper and pageserver metrics collection might time out. We've seen
this in both hadron and neon.
## Summary of changes
This PR moves metrics collection in PS/SK to the background so that we
will always get some metrics, despite there may be some delays. Will
leave it to the future work to reduce metrics collection time.
---------
Co-authored-by: Chen Luo <chen.luo@databricks.com>
This PR introduces a `image_creation_timeout` to page servers so that we
can force the image creation after a certain period. This is set to 1
day on dev/staging for now, and will rollout to production 1/2 weeks
later.
Majority of the PR are boilerplate code to add the new knob. Specific
changes of the PR are:
1. During L0 compaction, check if we should force a compaction if
min(LSN) of all delta layers < force_image_creation LSN.
2. During image creation, check if we should force a compaction if the
image's LSN < force_image_creation LSN and there are newer deltas with
overlapping key ranges.
3. Also tweaked the check image creation interval to make sure we honor
image_creation_timeout.
Vlad's note: This should be a no-op. I added an extra PS config for the
large timeline
threshold to enable this.
---------
Co-authored-by: Chen Luo <chen.luo@databricks.com>
When a function is owned by a superuser (bootstrap user or otherwise),
we consider it safe to run it. Only a superuser could have installed it,
typically from CREATE EXTENSION script: we trust the code to execute.
## Problem
This is intended to solve running pg_graphql Event Triggers
graphql_watch_ddl and graphql_watch_drop which are executing the secdef
function graphql.increment_schema_version().
## Summary of changes
Allow executing Event Trigger function owned by a superuser and with
SECURITY DEFINER properties. The Event Trigger code runs with superuser
privileges, and we consider that it's fine.
---------
Co-authored-by: Tristan Partin <tristan.partin@databricks.com>
## Problem
Test `test_branch_creation_before_gc` is flaky in the internal repo.
Pageserver sometimes lags behind write LSN. When we call GC it might not
reach the LSN we try to create the branch at yet.
## Summary of changes
- Wait till flush lsn on pageserver reaches the latest LSN before
calling GC.
## Problem
Follow up of #12400
## Summary of changes
We didn't set remote_size_mb to Some when initialized so it never gets
computed :(
Also added a new API to force refresh the properties.
Signed-off-by: Alex Chi Z <chi@neon.tech>
## Problem
Due to a lag in replication, we sometimes cannot get the parent branch
definition just after completion of the Public API restore call. This
leads to the test failures.
https://databricks.atlassian.net/browse/LKB-279
## Summary of changes
The workaround is implemented. Now test retries up to 30 seconds,
waiting for the branch definition to appear.
---------
Co-authored-by: Alexey Masterov <alexey.masterov@databricks.com>
## Problem
As discovered in https://github.com/neondatabase/neon/issues/12394,
test_multiple_subscription_branching generates skewed data distribution,
that leads to test failures when the unevenly filled last table receives
even more data.
for table t0: pub_res = (42001,), sub_res = (42001,)
for table t1: pub_res = (29001,), sub_res = (29001,)
for table t2: pub_res = (21001,), sub_res = (21001,)
for table t3: pub_res = (21001,), sub_res = (21001,)
for table t4: pub_res = (1711001,), sub_res = (1711001,)
## Summary of changes
Fix the name of the workload parameter to generate data as expected.
## Problem
We lost capability to explicitly disable the global eviction task (for
testing).
## Summary of changes
Add an `enabled` flag to `DiskUsageEvictionTaskConfig` to indicate
whether we should run the eviction job or not.
# TLDR
All changes are no-op except
1. publishing additional metrics.
2. problem VI
## Problem I
It has come to my attention that the Neon Storage Controller doesn't
correctly update its "observed" state of tenants previously associated
with PSs that has come back up after a local data loss. It would still
think that the old tenants are still attached to page servers and won't
ask more questions. The pageserver has enough information from the
reattach request/response to tell that something is wrong, but it
doesn't do anything about it either. We need to detect this situation in
production while I work on a fix.
(I think there is just some misunderstanding about how Neon manages
their pageserver deployments which got me confused about all the
invariants.)
## Summary of changes I
Added a `pageserver_local_data_loss_suspected` gauge metric that will be
set to 1 if we detect a problematic situation from the reattch response.
The problematic situation is when the PS doesn't have any local tenants
but received a reattach response containing tenants.
We can set up an alert using this metric. The alert should be raised
whenever this metric reports non-zero number.
Also added a HTTP PUT
`http://pageserver/hadron-internal/reset_alert_gauges` API on the
pageserver that can be used to reset the gauge and the alert once we
manually rectify the situation (by restarting the HCC).
## Problem II
Azure upload is 3x slower than AWS. -> 3x slower ingestion.
The reason for the slower upload is that Azure upload in page server is
much slower => higher flush latency => higher disk consistent LSN =>
higher back pressure.
## Summary of changes II
Use Azure put_block API to uploads a 1 GB layer file in 8 blocks in
parallel.
I set the put_block block size to be 128 MB by default in azure config.
To minimize neon changes, upload function passes the layer file path to
the azure upload code through the storage metadata. This allows the
azure put block to use FileChunkStreamRead to stream read from one
partition in the file instead of loading all file data in memory and
split it into 8 128 MB chunks.
## How is this tested? II
1. rust test_real_azure tests the put_block change.
3. I deployed the change in azure dev and saw flush latency reduces from
~30 seconds to 10 seconds.
4. I also did a bunch of stress test using sqlsmith and 100 GB TPCDS
runs.
## Problem III
Currently Neon limits the compaction tasks as 3/4 * CPU cores. This
limits the overall compaction throughput and it can easily cause
head-of-the-line blocking problems when a few large tenants are
compacting.
## Summary of changes III
This PR increases the limit of compaction tasks as `BG_TASKS_PER_THREAD`
(default 4) * CPU cores. Note that `CONCURRENT_BACKGROUND_TASKS` also
limits some other tasks `logical_size_calculation` and `layer eviction`
. But compaction should be the most frequent and time-consuming task.
## Summary of changes IV
This PR adds the following PageServer metrics:
1. `pageserver_disk_usage_based_eviction_evicted_bytes_total`: captures
the total amount of bytes evicted. It's more straightforward to see the
bytes directly instead of layers.
2. `pageserver_active_storage_operations_count`: captures the active
storage operation, e.g., flush, L0 compaction, image creation etc. It's
useful to visualize these active operations to get a better idea of what
PageServers are spending cycles on in the background.
## Summary of changes V
When investigating data corruptions, it's useful to search the base
image and all WAL records of a page up to an LSN, i.e., a breakdown of
GetPage@LSN request. This PR implements this functionality with two
tools:
1. Extended `pagectl` with a new command to search the layer files for a
given key up to a given LSN from the `index_part.json` file. The output
can be used to download the files from S3 and then search the file
contents using the second tool.
Example usage:
```
cargo run --bin pagectl index-part search --tenant-id 09b99ea3239bbb3b2d883a59f087659d --timeline-id 7bedf4a6995baff7c0421ff9aebbcdab --path ~/Downloads/corruption/index_part.json-0000000c-formatted --key 000000067F000080140000802100000D61BD --lsn 70C/BF3D61D8
```
Example output:
```
tenants/09b99ea3239bbb3b2d883a59f087659d-0304/timelines/7bedf4a6995baff7c0421ff9aebbcdab/000000067F0000801400000B180000000002-000000067F0000801400008028000002FEFF__000007089F0B5381-0000070C7679EEB9-0000000c
tenants/09b99ea3239bbb3b2d883a59f087659d-0304/timelines/7bedf4a6995baff7c0421ff9aebbcdab/000000000000000000000000000000000000-000000067F0000801400008028000002F3F1__000006DD95B6F609-000006E2BA14C369-0000000c
tenants/09b99ea3239bbb3b2d883a59f087659d-0304/timelines/7bedf4a6995baff7c0421ff9aebbcdab/000000067F0000801400000B180000000002-000000067F000080140000802100001B0973__000006D33429F539-000006DD95B6F609-0000000c
tenants/09b99ea3239bbb3b2d883a59f087659d-0304/timelines/7bedf4a6995baff7c0421ff9aebbcdab/000000067F0000801400000B180000000002-000000067F00008014000080210000164D81__000006C6343B2D31-000006D33429F539-0000000b
tenants/09b99ea3239bbb3b2d883a59f087659d-0304/timelines/7bedf4a6995baff7c0421ff9aebbcdab/000000067F0000801400000B180000000002-000000067F0000801400008021000017687B__000006BA344FA7F1-000006C6343B2D31-0000000b
tenants/09b99ea3239bbb3b2d883a59f087659d-0304/timelines/7bedf4a6995baff7c0421ff9aebbcdab/000000067F0000801400000B180000000002-000000067F00008014000080210000165BAB__000006AD34613D19-000006BA344FA7F1-0000000b
tenants/09b99ea3239bbb3b2d883a59f087659d-0304/timelines/7bedf4a6995baff7c0421ff9aebbcdab/000000067F0000801400000B180000000002-000000067F00008014000080210000137A39__0000069F34773461-000006AD34613D19-0000000b
tenants/09b99ea3239bbb3b2d883a59f087659d-0304/timelines/7bedf4a6995baff7c0421ff9aebbcdab/000000067F000080140000802100000D4000-000000067F000080140000802100000F0000__0000069F34773460-0000000b
```
2. Added a unit test to search the layer file contents. It's not
implemented part of `pagectl` because it depends on some test harness
code, which can only be used by unit tests.
Example usage:
```
cargo test --package pageserver --lib -- tenant::debug::test_search_key --exact --nocapture -- --tenant-id 09b99ea3239bbb3b2d883a59f087659d --timeline-id 7bedf4a6995baff7c0421ff9aebbcdab --data-dir /Users/chen.luo/Downloads/corruption --key 000000067F000080140000802100000D61BD --lsn 70C/BF3D61D8
```
Example output:
```
# omitted image for brievity
delta: 69F/769D8180: will_init: false, "OgAAALGkuwXwYp12nwYAAECGAAASIqLHAAAAAH8GAAAUgAAAIYAAAL1hDQD/DLGkuwUDAAAAEAAWAA=="
delta: 69F/769CB6D8: will_init: false, "PQAAALGkuwXotZx2nwYAABAJAAAFk7tpACAGAH8GAAAUgAAAIYAAAL1hDQD/CQUAEAASALExuwUBAAAAAA=="
```
## Problem VI
Currently when page service resolves shards from page numbers, it
doesn't fully support the case that the shard could be split in the
middle. This will lead to query failures during the tenant split for
either commit or abort cases (it's mostly for abort).
## Summary of changes VI
This PR adds retry logic in `Cache::get()` to deal with shard resolution
errors more gracefully. Specifically, it'll clear the cache and retry,
instead of failing the query immediately. It also reduces the internal
timeout to make retries faster.
The PR also fixes a very obvious bug in
`TenantManager::resolve_attached_shard` where the code tries to cache
the computed the shard number, but forgot to recompute when the shard
count is different.
---------
Co-authored-by: William Huang <william.huang@databricks.com>
Co-authored-by: Haoyu Huang <haoyu.huang@databricks.com>
Co-authored-by: Chen Luo <chen.luo@databricks.com>
Co-authored-by: Vlad Lazar <vlad.lazar@databricks.com>
Co-authored-by: Vlad Lazar <vlad@neon.tech>
The introduction of the default lease deadline feature 9 months ago made
it so
that after PS restart, `.timeline_gc()` calls in Python tests are no-ops
for 10 minute after pageserver startup: the `gc_iteration()` bails with
`Skipping GC because lsn lease deadline is not reached`.
I did some impact analysis in the following PR. About 30 Python tests
are affected:
- https://github.com/neondatabase/neon/pull/12411
Rust tests that don't explicitly enable periodic GC or invoke GC
manually
are unaffected because we disable periodic GC by default in
the `TenantHarness`'s tenant config.
Two tests explicitly did `start_paused=true` + `tokio::time::advance()`,
but it would add cognitive and code bloat to each existing and future
test case that uses TenantHarness if we took that route.
So, this PR sets the default lease deadline feature in both Python
and Rust tests to zero by default. Tests that test the feature were
thus identified by failing the test:
- Python test `test_readonly_node_gc` + `test_lsn_lease_size`
- Rust test `test_lsn_lease`.
To accomplish the above, I changed the code that computes the initial
lease
deadline to respect the pageserver.toml's default tenant config, which
it didn't before (and I would consider a bug). The Python test harness
and the Rust TenantHarness test harness then simply set the default
tenant
config field to zero.
Drive-by:
- `test_lsn_lease_size` was writing a lot of data unnecessarily; reduce
the amount and speed up the test
refs
- PR that introduced default lease deadline:
https://github.com/neondatabase/neon/pull/9055/files
- fixes https://databricks.atlassian.net/browse/LKB-92
---------
Co-authored-by: Christian Schwarz <Christian Schwarz>
## Problem
Pageserver now writes errors in the log during the safekeeper migration.
Some errors are added to allowed errors, but "timeline not found in
global map" is not.
- Will be properly fixed in
https://github.com/neondatabase/neon/issues/12191
## Summary of changes
Add "timeline not found in global map" error in a list of allowed errors
in `test_safekeeper_migration_simple`
## Problem
Test is flaky due to the following warning in the logs:
```
Keeping extra secondaries: can't determine which of [NodeId(1), NodeId(2)] to remove (some nodes offline?)
```
Some nodes being offline is expected behavior in this test.
## Summary of changes
- Added `Keeping extra secondaries` to the list of allowed errors
- Improved logging for better debugging experience
Co-authored-by: Aleksandr Sarantsev <aleksandr.sarantsev@databricks.com>
## Problem
Names are not consistent between safekeeper migration RFC and the actual
implementation.
It's not used anywhere in production yet, so it's safe to rename. We
don't need to worry about backward compatibility.
- Follow up on https://github.com/neondatabase/neon/pull/12432
## Summary of changes
- rename term -> last_log_term in TimelineMembershipSwitchResponse
- add missing fields to TimelineMembershipSwitchResponse in python
- Add ComputeSpec flag `offload_lfc_interval_seconds` controlling
whether LFC should be offloaded to endpoint storage. Default value
(None) means "don't offload".
- Add glue code around it for `neon_local` and integration tests.
- Add `autoprewarm` mode for `test_lfc_prewarm` testing
`offload_lfc_interval_seconds` and `autoprewarm` flags in conjunction.
- Rename `compute_ctl_lfc_prewarm_requests_total` and
`compute_ctl_lfc_offload_requests_total` to
`compute_ctl_lfc_prewarms_total`
and `compute_ctl_lfc_offloads_total` to reflect we count prewarms and
offloads, not `compute_ctl` requests of those.
Don't count request in metrics if there is a prewarm/offload already
ongoing.
https://github.com/neondatabase/cloud/issues/19011
Resolves: https://github.com/neondatabase/cloud/issues/30770
## Problem
The current deletion operation is synchronous and blocking, which is
unsuitable for potentially long-running tasks like. In such cases, the
standard HTTP request-response pattern is not a good fit.
## Summary of Changes
- Added new `storcon_cli` commands: `NodeStartDelete` and
`NodeCancelDelete` to initiate and cancel deletion asynchronously.
- Added corresponding `storcon` HTTP handlers to support the new
start/cancel deletion flow.
- Introduced a new type of background operation: `Delete`, to track and
manage the deletion process outside the request lifecycle.
---------
Co-authored-by: Aleksandr Sarantsev <aleksandr.sarantsev@databricks.com>
## Problem
I suspect that the pageservers get stuck on receiving broker updates.
## Summary of changes
This is a an opportunistic (staging only) patch that resets the
susbscription
stream if it's been idle for a while. This won't go to prod in this
form.
I'll revert or update it before Friday.
## Problem
Ancestor detach from a previously detached parent when there were no
writes panics since it tries to upload the tombstone layer twice.
## Summary of Changes
If we're gonna copy the tombstone from the ancestor, don't bother
creating it.
Fixes https://github.com/neondatabase/neon/issues/12458
When deploying new safekeepers, we don't immediately want to send
traffic to them. Maybe they are not ready yet by the time the deploy
script is registering them with the storage controller.
For pageservers, the storcon solves the problem by not scheduling stuff
to them unless there has been a positive heartbeat response. We can't do
the same for safekeepers though, otherwise a single down safekeeper
would mean we can't create new timelines in smaller regions where there
is only three safekeepers in total.
So far we have created safekeepers as `pause` but this adds a manual
step to safekeeper deployment which is prone to oversight. We want
things to be automatted. So we introduce a new state `activating` that
acts just like `pause`, except that we automatically transition the
policy to `active` once we get a positive heartbeat from the safekeeper.
For `pause`, we always keep the safekeeper paused.
## Problem
Currently, if `storcon` (storage controller) reconciliations repeatedly
fail, the system will indefinitely freeze optimizations. This can result
in optimization starvation for several days until the reconciliation
issues are manually resolved. To mitigate this, we should detect
persistently failing reconciliations and exclude them from influencing
the optimization decision.
## Summary of Changes
- A tenant shard reconciliation is now considered "keep-failing" if it
fails 5 consecutive times. These failures are excluded from the
optimization readiness check.
- Added a new metric: `storage_controller_keep_failing_reconciles` to
monitor such cases.
- Added a warning log message when a reconciliation is marked as
"keep-failing".
---------
Co-authored-by: Aleksandr Sarantsev <aleksandr.sarantsev@databricks.com>
## TLDR
This PR is a no-op. The changes are disabled by default.
## Problem
I. Currently we don't have a way to detect disk I/O failures from WAL
operations.
II.
We observe that the offloader fails to upload a segment due to race
conditions on XLOG SWITCH and PG start streaming WALs. wal_backup task
continously failing to upload a full segment while the segment remains
partial on the disk.
The consequence is that commit_lsn for all SKs move forward but
backup_lsn stays the same. Then, all SKs run out of disk space.
III.
We have discovered SK bugs where the WAL offload owner cannot keep up
with WAL backup/upload to S3, which results in an unbounded accumulation
of WAL segment files on the Safekeeper's disk until the disk becomes
full. This is a somewhat dangerous operation that is hard to recover
from because the Safekeeper cannot write its control files when it is
out of disk space. There are actually 2 problems here:
1. A single problematic timeline can take over the entire disk for the
SK
2. Once out of disk, it's difficult to recover SK
IV.
Neon reports certain storage errors as "critical" errors using a marco,
which will increment a counter/metric that can be used to raise alerts.
However, this metric isn't sliced by tenant and/or timeline today. We
need the tenant/timeline dimension to better respond to incidents and
for blast radius analysis.
## Summary of changes
I.
The PR adds a `safekeeper_wal_disk_io_errors ` which is incremented when
SK fails to create or flush WALs.
II.
To mitigate this issue, we will re-elect a new offloader if the current
offloader is lagging behind too much.
Each SK makes the decision locally but they are aware of each other's
commit and backup lsns.
The new algorithm is
- determine_offloader will pick a SK. say SK-1.
- Each SK checks
-- if commit_lsn - back_lsn > threshold,
-- -- remove SK-1 from the candidate and call determine_offloader again.
SK-1 will step down and all SKs will elect the same leader again.
After the backup is caught up, the leader will become SK-1 again.
This also helps when SK-1 is slow to backup.
I'll set the reelect backup lag to 4 GB later. Setting to 128 MB in dev
to trigger the code more frequently.
III.
This change addresses problem no. 1 by having the Safekeeper perform a
timeline disk utilization check check when processing WAL proposal
messages from Postgres/compute. The Safekeeper now rejects the WAL
proposal message, effectively stops writing more WAL for the timeline to
disk, if the existing WAL files for the timeline on the SK disk exceeds
a certain size (the default threshold is 100GB). The disk utilization is
calculated based on a `last_removed_segno` variable tracked by the
background task removing WAL files, which produces an accurate and
conservative estimate (>= than actual disk usage) of the actual disk
usage.
IV.
* Add a new metric `hadron_critical_storage_event_count` that has the
`tenant_shard_id` and `timeline_id` as dimensions.
* Modified the `crtitical!` marco to include tenant_id and timeline_id
as additional arguments and adapted existing call sites to populate the
tenant shard and timeline ID fields. The `critical!` marco invocation
now increments the `hadron_critical_storage_event_count` with the extra
dimensions. (In SK there isn't the notion of a tenant-shard, so just the
tenant ID is recorded in lieu of tenant shard ID.)
I considered adding a separate marco to avoid merge conflicts, but I
think in this case (detecting critical errors) conflicts are probably
more desirable so that we can be aware whenever Neon adds another
`critical!` invocation in their code.
---------
Co-authored-by: Chen Luo <chen.luo@databricks.com>
Co-authored-by: Haoyu Huang <haoyu.huang@databricks.com>
Co-authored-by: William Huang <william.huang@databricks.com>
## Problem
The billing team wants to change the billing events pipeline and use a
common events format in S3 buckets across different event producers.
## Summary of changes
Change the events storage format for billing events from JSON to NDJSON.
Also partition files by hours, rather than days.
Resolves: https://github.com/neondatabase/cloud/issues/29995
## Problem
https://github.com/neondatabase/neon/pull/11712 changed how computes are
started in the test: the lsn is specified, making them read-only static
replicas. Lsn is `last_record_lsn` from pageserver. It works fine with
read-only branches (because their `last_record_lsn` is equal to
`start_lsn` and always valid). But with writable timelines, the
`last_record_lsn` on the pageserver might be stale.
Particularly in this test, after the `detach_branch` operation, the
tenant is reset on the pagesever. It leads to `last_record_lsn` going
back to `disk_consistent_lsn`, so basically rolling back some recent
writes.
If we start a primary compute, it will start at safekeepers' commit Lsn,
which is the correct one , and will wait till pageserver catches up with
this Lsn after reset.
- Closes: https://github.com/neondatabase/neon/issues/12365
## Summary of changes
- Start `primary` compute for writable timelines.
## Problem
We persist safekeeper host/port in the storcon DB after
https://github.com/neondatabase/neon/pull/11712, so the storcon fails to
ping safekeepers in the compatibility tests, where we start the cluster
from the snapshot.
PR also adds some small code improvements related to the test failure.
- Closes: https://github.com/neondatabase/neon/issues/12339
## Summary of changes
- Update safekeeper ports in the storcon DB when starting the neon from
the dir (snapshot)
- Fail the response on all not-success codes (e.g. 3xx). Should not
happen, but just to be more safe.
- Add `neon_previous/` to .gitignore to make it easier to run compat
tests.
- Add missing EXPORT to the instruction for running compat tests
## Problem
We don't notify cplane about safekeeper membership change yet. Without
the notification the compute needs to know all the safekeepers on the
cluster to be able to speak to them. Change notifications will allow to
avoid it.
- Closes: https://github.com/neondatabase/neon/issues/12188
## Summary of changes
- Implement `notify_safekeepers` method in `ComputeHook`
- Notify cplane about safekeepers in `safekeeper_migrate` handler.
- Update the test to make sure notifications work.
## Out of scope
- There is `cplane_notified_generation` field in `timelines` table in
strocon's database. It's not needed now, so it's not updated in the PR.
Probably we can remove it.
- e2e tests to make sure it works with a production cplane
## Problem
Some of the design decisions in PR #12256 were influenced by the
requirements of consistency tests. These decisions introduced
intermediate logic that is no longer needed and should be cleaned up.
## Summary of Changes
- Remove the `feature("testing")` flag related to
`kick_secondary_download`.
- Set the default value of `kick_secondary_download` back to false,
reflecting the intended production behavior.
Co-authored-by: Aleksandr Sarantsev <aleksandr.sarantsev@databricks.com>
We don't have cancellation support for timeline deletions. In other
words, timeline deletion might still go on in an older generation while
we are attaching it in a newer generation already, because the
cancellation simply hasn't reached the deletion code.
This has caused us to hit a situation with offloaded timelines in which
the timeline was in an unrecoverable state: always returning an accepted
response, but never a 404 like it should be.
The detailed description can be found in
[here](https://github.com/neondatabase/cloud/issues/30406#issuecomment-3008667859)
(private repo link).
TLDR:
1. we ask to delete timeline on old pageserver/generation, starts
process in background
2. the storcon migrates the tenant to a different pageserver.
- during attach, the pageserver still finds an index part, so it adds it
to `offloaded_timelines`
4. the timeline deletion finishes, removing the index part in S3
5. there is a retry of the timeline deletion endpoint, sent to the new
pageserver location. it is bound to fail however:
- as the index part is gone, we print `Timeline already deleted in
remote storage`.
- the problem is that we then return an accepted response code, and not
a 404.
- this confuses the code calling us. it thinks the timeline is not
deleted, so keeps retrying.
- this state never gets recovered from until a reset/detach, because of
the `offloaded_timelines` entry staying there.
This is where this PR fixes things: if no index part can be found, we
can safely assume that the timeline is gone in S3 (it's the last thing
to be deleted), so we can remove it from `offloaded_timelines` and
trigger a reupload of the manifest. Subsequent retries will pick that
up.
Why not improve the cancellation support? It is a more disruptive code
change, that might have its own risks. So we don't do it for now.
Fixes https://github.com/neondatabase/cloud/issues/30406
Make the safekeeper `pull_timeline` endpoint support timelines that
haven't had any writes yet. In the storcon managed sk timelines world,
if a safekeeper goes down temporarily, the storcon will schedule a
`pull_timeline` call. There is no guarantee however that by when the
safekeeper is online again, there have been writes to the timeline yet.
The `snapshot` endpoint gives an error if the timeline hasn't had
writes, so we avoid calling it if `timeline_start_lsn` indicates a
freshly created timeline.
Fixes#11422
Part of #11670
In `test_layer_download_cancelled_by_config_location`, we simulate hung
downloads via the `before-downloading-layer-stream-pausable` failpoint.
Then, we cancel a timeline via the `location_config` endpoint.
With the new default as of
https://github.com/neondatabase/neon/pull/11712, we would be creating
the timeline on safekeepers regardless if there have been writes or not,
and it turns out the test relied on the timeline not existing on
safekeepers, due to a cancellation bug:
* as established before, the test makes the read path hang
* the timeline cancellation function first cancels the walreceiver, and
only then cancels the timeline's token
* `WalIngest::new` is requesting a checkpoint, which hits the read path
* at cancellation time, we'd be hanging inside the read, not seeing the
cancellation of the walreceiver
* the test would time out due to the hang
This is probably also reproducible in the wild when there is S3
unavailabilies or bottlenecks. So we thought that it's worthwhile to fix
the hang issue. The approach chosen in the end involves the
`tokio::select` macro.
In PR 11712, we originally punted on the test due to the hang and opted
it out from the new default, but now we can use the new default.
Part of https://github.com/neondatabase/neon/issues/12299
